If you can help out with any of the following info, email me with a description or attach a gif. I'll post it as soon as I get it so we can help everyone out.
"FTR" Keys
If anyone has information on what is inside these parallel port keys, PLEASE, let us know.
MAXTRAC
I'd like to find a way of getting the silly radio to do something other than 12.5khz steps on 800 MHz (5 or 2.5 khz would be nice :) )
OK, well, I managed to get a VLN5443A firmware chip. But haven't been able to get the radio to do 99 channels. Any ideas?
Also looking for a way to change the tune-up frequencies that pertain to the service portion of the RSS. Specifically the frequencies used in the low band (42-50 MHz) models.
P1225/M1225
Info on expanding the number of channels if possible.
Spectra
The pinout for the Keyloader to Low Power Spectra cable. What the model definitions bits are that reside in the command board and the exact location.
Is there a programming cable pinout other than the 2 I have? If so, what is it?
Is there a programming cable for the mic jack?
Any info on blanking the board of a Spectra Astro to reinitialize it.
Getting the radio to scan more than 16 channels.
Any way to change the model number in the radio.
Looking for the pinout of the RKN4047A flash programming cable.
MICOR
Looking for info on converting an 800MHz radio to the 900MHz ham band, if possible
Maratrac
Looking for accessory connector details.
What is involved in converting a Maratrac to 99 channels?
Also looking for info on converting a Type I/II(i) type radio into a "LS" Trunking radio.
MCX600
What is it? Need programming cable info, etc.
Minitor III
Looking for the pinout of the programming stand.
iDEN
Looking for just about any iDEN information, programming info, RSS part numbers, accessory connector pinouts, etc.
MTSX Series
A way (other than send it home to Ma M) to un-"Toolproof" the radio
DARCOM 9000
Motorola DARCOM 9000 900MHz data radio, any info on programming this radio and/or programming it out of band.
GM300/GM350
RSS modification to disable encryption in the codeplug.
SYSTEMS SABER
Anyone have problems with the Out of Band mod? Anyone have a different modification?
MT1000
Any way to get more than 8ch into the scan list for a 99ch radio.
Any way to blank the logic board or "reset" the radio to remove a bad codeplug.
Mostar
Looking for a schematic of the MIB, the service manual should be 68-P80900Z57-0, see if the last 3 pages contain the schematic.
Mitrek
I have been told there is a Synthesizer module which plugs into the Mitrek in place of the channel element. Any idea where it is available from?
GP300 Select-V
Looking for datafile (codeplug) format details. Have someone who'd like to extend S5 sequence length up to 32 tones if possible.
Looking for a way to convert an 8ch radio to 16ch.
Another problem is to decrease the tone length (about 5 ms).
Also looking for a way to program these radios out of band, looks like the mod we currently have doesn't work in most situations.
HPN4001 power supply
Have someone looking for the following info:
This PS is made (i think) by ASTEC. Looking for a part number for a replacement for the thermistor.
Also looking for a part number for a service manual.
SYNTOR X-9000
Converting an 800 MHz radio for use in the 900 MHz band, if possible.
Also looking for info on using one control head with 2 drawers (UHF and VHF). It can be done, just need the info on how to do it.
Looking for info on using an "A3" control group on a low band radio (mod # T71kej7j04ak)
Looking for information if anybody has been able to take the ver8.0 syntorx 9000, not the E, out of band, have someone who is trying to put 460MHz channels in a 470-482 radio, or 470 channels in a 450-470 radio (within the confines of the vco).
MX300s
Info on the frequency algorithm and eprom layout.
MCR100 Repeater
Looking for programming info, specifically, if a UHF machine will do the Ham split, and if so, how?
Visar
Any way to convert a 800 MHz trunking radio into a conventional radio.
MSF5000/MTRI2000
Looking for the pin in/out configuration for the installation cable between the MRTI 2000 and the MSF 5000 digital repeater. Motorola part number CDN6017.
Also looking for the pin in/out configuration of the programming cable the MRTI 2000 uses. Motorola part number 30-80385B23.
Looking for programming algorithms and information for the EPROM versions (non RSS programmable ones)
MX-300T
Heard a rumour that there is a jumper somewhere (JU100?) the convert the radio into a conventional radio rather than trunked. Any truth to this?
P>PulsarProgramming information and jumper settings.
Micom-2 HF SSB
Programming cable pinout and any other programming information.
Privacy Plus 750/1000
Looking for programming cable information.
Also looking for the pinout of the cable that connects the hang-up box to the radio.