If you can help out with any of the following info, email us with a description or attach a gif. We'll post it in the next update so we can help everyone out.
"FTR" Keys
If anyone has information on what is inside these parallel port keys, PLEASE, let us know.
MAXTRAC
We'd like to find a way of getting the silly radio to do something other than 12.5khz steps on 800 MHz (5 or 2.5 khz would be nice :) )
OK, well, we managed to get a VLN5443A firmware chip. But haven't been able to get the radio to do 99 channels. Any ideas?
Also looking for a way to change the tune-up frequencies that pertain to the service portion of the RSS. Specifically the frequencies used in the low band (42-50 MHz) models.
GM300/GM350
RSS modification to disable encryption in the codeplug.
Also looking for someone who has been successful in blanking a GM300 logic board and getting it to reinitialize with GM300 RSS
HT750/1250/1550, PRO5150/7150/9150
Looking for out of band modifications
Spectra
The pinout for the Keyloader to Low Power Spectra cable. What the model definitions bits are that reside in the command board and the exact location.
Is there a programming cable pinout other than the 2 we have? If so, what is it?
Any info on blanking the board of a Spectra Astro to reinitialize it.
Getting the radio to scan more than 16 channels.
Any way to change the model number in the radio.
Looking for the pinout of the RKN4047A flash programming cable.
Looking for information on connecting a MDC1200 terminal to the accessory connector of the Spectra.
Maratrac
Also looking for info on converting a Type I/II(i) type radio into a "LS" Trunking radio.
Is there a modification to add Pac/RT to these radios?
iDEN
Looking for just about any iDEN information, programming info, RSS part numbers, accessory connector pinouts, etc.
MTSX Series
A way (other than send it home to Ma M) to un-"Toolproof" the radio
Need the pinouts for the DB25 connector on the MTSX Convertacom as well as power, and what the two switches do. The model is NTN1340A
DARCOM 9000
Motorola DARCOM 9000 900MHz data radio, any info on programming this radio and/or programming it out of band.
SYSTEMS SABER
We need a different out of band modification
Looking for the pinout of the Service Cable (programming cable with the RTX4005B connector)
ASTRO SABER
Looking for out of band info.
MT1000
Any way to get more than 8ch into the scan list for a 99ch radio.
Mostar
Looking for a schematic of the MIB, the service manual 68-P80900Z57-0 doesn't have the schematic in it as far as we know.
GP300 Select-V
Looking for datafile (codeplug) format details. Have someone who'd like to extend S5 sequence length up to 32 tones if possible.
Looking for a way to convert an 8ch radio to 16ch.
Another problem is to decrease the tone length (about 5 ms).
HPN4001 power supply
Have someone looking for the following info:
This PS is made (we think) by ASTEC. Looking for a part number for a replacement for the thermistor.
Also looking for a part number for a service manual.
SYNTOR X-9000
Converting an 800 MHz radio for use in the 900 MHz band, if possible.
Also looking for info on using one control head with 2 drawers (UHF and VHF). It can be done, just need the info on how to do it. Already have some of the part numbers, just need some schematics.
Looking for info on using an "A3" control group on a low band radio (mod # T71kej7j04ak)
Looking for information if anybody has been able to take the ver8.0 syntorx 9000, not the E, out of band, have someone who is trying to put 460MHz channels in a 470-482 radio, or 470 channels in a 450-470 radio (within the confines of the vco).
Looking for the pinout of the DB25 on the back of a HLN1196A switch box, a.k.a. a wildcard box
MX300s
Info on the frequency algorithm and eprom layout.
MCR100 Repeater
Looking for programming info, specifically, if a UHF machine will do the Ham split, and if so, how?
Visar
Any way to convert a 800 MHz trunking radio into a conventional radio.
Any way to convert a Privacy Plus Visar to do Type II trunking?
MSF5000/MTRI2000
Looking for the pin in/out configuration for the installation cable between the MRTI 2000 and the MSF 5000 digital repeater. Motorola part number CDN6017.
Also looking for the pin in/out configuration of the programming cable the MRTI 2000 uses. Motorola part number 30-80385B23.
Looking for programming algorithms and information for the EPROM versions (non RSS programmable ones)
MX-300T
Heard a rumour that there is a jumper somewhere (JU100?) the convert the radio into a conventional radio rather than trunked. Any truth to this?
Pulsar
Programming information and jumper settings.
Privacy Plus 750/1000
Looking for programming cable information.
Also looking for the pinout of the cable that connects the hang-up box to the radio.
MCS2000
Looking for information on connecting a MCS2000 to a Motorola Moscad RTU.
Need the pinout of the KVL programming cable.
MC2100
Looking or info on the protocol used by the accessory connector for remote interfacing.
LT200
Looking for the pinout of the programming cable (if applicable) as well as the pinout of the accessory connector.
AP10
Looking for out of band information.
GP338
UHF out of band info.
M1225ls/P1225ls
Looking for a way to convert them from trunking back to conventional operation, or a way to get more than 2 conventional frequencies programmed into them.
P1225
Looking for any out of band info.
Systems 9000 or Maratrac Siren
Any way to make one of them a stand alone siren without the radio?
PX300 "Lunchbox" Radio
Looking for the pinout of the 4 pin plug on the battery case for charging.
Also looking for the pinout of the 12 pinplug on the charger, p/n NLN6531A.
Traxar/MCX1000
Looking for the pinouts of a HMN1001B Traxar mic to convert it for use with a MCX1000.
GM950
Looking for the pinout of the GTF377A "Front to Back" cable.