Please note, another update will be done when we regain access to scanning and image editing facilities, thanks.
August 22, 1999
-Fixed some broken links on the MTSX and SP50 pages.
August 14, 1999
-Added a modification to allow the MTX900 to be used in the Ham Band
-Added a source for MT500 channel elements
-Added some info on the GP280 and 220MHz GP300's in general
-Added some part numbers to the Spirit page
-Added a little info on the MTSX Convertacom
-Added the pinouts of the Minitor II connector
-Added some info to the Spectra page on clearing a FL01/82 error
-Added a bit of info on how to convert an 800 MHZ Micor to the Ham Band
-Added a page with the pinout compatibility between the Motorola and Polaris RIB's
-Added some info on the MCX600
-Added a bit of information on converting a MTX B5 into A MTS C7
-Added yet another method to try to revive a dead HT600/MT1000
-Added some info on the MX1000/2000/3000
-Updated the WANTED page.
May 15, 1999
-Added Quick Call II Encoding and Standard PL Tones to the Utilities page
-Updated the out of band info for the 5-tone GP300
May 14, 1999
-Added 99 channel, new out of band, and VIP connector pinouts to the Maratrac page
-Added a new Utilities page with all kinds of assorted information
-Couple of changes to the Model Specific Information page
-Updated the Pinouts page
-Added a link to a site with a less complex RIB schematic for limited uses
-Updated the link to Condor's GP68 User's Guide
-Added some tuning information for using a Maxtrac/Radius on 6 meters
-Added some info on the Saber SVA wiring
-Straightened out some of the information regarding the different Saber programming cables
-Added another method to try and clear a MT1000 of a bad codeplug
-Added some info to the Micom-2 page
-Added another tip regading out of band programming with the 5-tone GP300
-Added some info to the Iden page
-Added some info to the Syntor page regarding using a single control head with two radios
-Corrected some info on the GM350 page
-Added some part numbers to the Encryption page
-Hopefully added enough info to the Spectra programming cable page to make selecting the correct cable easier
-Added a link on the Mitrek page for programming a reed-less PL board
-Added the pinout of the Minitor-III programming base
-Updated the WANTED page.
March 18, 1999
-Added a Micom-2 page
-Added a Converta-Com modification to allow programming of the Saber to the Saber page
-Added some Iden information
-Added another 16 channel mod for the MT1000 and updated the Converta-Com information
-Added some keyloader and other general information for the Astro Saber
-Added programming info and created a page for the Traxar
-Added a possible expanded channel mod for the M1225
-Updated the Visar page
-Updated the GP68 page
-Added a bunch of information to the Minitor Page
-Added a link to the Micor page
-Added out of band information to the HT50/P100 page
-Updated information on the GTX page
-Added a page on 2-way encryption
-Updated some pager service manual info
-Added info regarding the P1820AX portable repeater to the Spectra Page
-Fixed an oops on the SP50 programming cable page
March 15, 1999
-Added a fax number to our Contact List.
January 30, 1999
-We now have a source of hybrid PC Boards for the RIB, see the RIB page for details
-Added a Minitor I/II/III page
-Added the pinout for the Maratrac control head cable
-Added the accessory connector pinout for the M1225
-Added another tip for trying to clear a bad MT1000 codeplug
-Added some info to the GM300 page regarding the OpCode #7 Error
-Added a contact for modifying STX's
-Added a programming cable for the Radius M170
-Added some out of band programming information for the Syntor
-Added "dots" to the RIB schematic for all those who couldn't figure it out without them
-Updated some info on the P50/P50+
-Created a page for the HKN9755A cloning box (clones GP300's and P110's)
-Created a page for the Mocom70
-Created a page for the MX Series Converta-Com
-Created a page for the Comtegra Console
-Created a page for the PAC-RT, including a Syntor-X to PAC-RT cable diagram
-Made a change to the Syntrx page
-Updated the WANTED page.
January 3, 1999
-Fixed a couple of broken links (should learn not to do this stuff at 0300...)
-Added the pinout for the Programming/Service Cable for the new HT750/1250/1550 series of radios
-Added some info on converting Maxar/Moxy's to 6m
-Corrected a minor error to the P100 programming cable
-Added concrete information on what the "ToolProofing" error is in the MTSX series
-Added another source for information on the Syntor series of radios
-Added a link to the Motorola Parts Database so everyone can search for their own parts/prices from Motorola
January 2, 1999
-Happy New Year! Another year passes, and were still alive!! Let's hope it continues.
-Added some programming information on the Mostar
-Updated some information on the accessory connector for the Saber/Astro Saber
-Added yet another repeater linking cable for Maxtrac/Radius radios
-Added a link to someone who is working on a Model Breakdown chart of Motorola Radios and who can program older PROM type radios
-Added some info on PTT ID's for the GM300
-Added programming information on the Syntrx
-Added a GTX page
-Added a T5600 page with pinouts
-Updated the WANTED page.
November 28, 1998
-Added pinouts for: GP68 Cloning and Service Cable, GM950 Accessory and Mic, Saber Accessory, GP600 Programming, Command Plus Programming
-Added info to the Syntrx page
-Added a user's guide for the AP73
-Added some info on the MT1000 and programming
-Added a Spectra model chart and some other info to the Spectra page including a Power-Up Self Check fail code table
-Added packet conversion info for the Micor and Mitrek, GM300, Maxtrac/Radius radios
-Added a page on the Motorola Synthesized RF Link
-Added info on using Syswatch with a couple of different radios
-Added another repeater linking cable for the Maxtrac/Radius
-Updated the WANTED page.
October 13, 1998
At the request of the author, changed the link to MoSlo's home page
Added a link to Break Point Software, the makers of THE best hex editor, Hex Workshop.
October 12, 1998
-Added the cloning cable pinout, cloning instructions, and 99 channel scan programming info to the HT600/MT1000/P200 page
-Added Pac/RT and Type I to Type II/IIi trunking conversion infor to the Maxtrac page
-Updated the model chart and added channel expansion info and the power connector pinout to the MCX1000 page
-Re-scanned the MTSX model chart
-Added B5 to C7 conversion info the the Spectra page
-Added info on adding conventional personalities to trunking STX's
-Added some out of band info for 5-tone GP300's
-Added the R.I.C.K. schematic
-Added some info on the mic connector for the Maxar 50 and the power connector for the Moxy
-Added a PROM conversion chart for the Syntrx
-Corrected an error on the pager RIB schematic
-Added the pinout and schematic of the PL board for the SP10
-Added the programming cable pinout for the MTR-2000 repeater
-Added some info on adding channels to an SM50
-Added another possible dongle pinout for TK
-Added a link to get MoSlo for slowing your machine down
-Made a correction to the Spectra 900 programming cable
-Updated the WANTED page.
August 3, 1998
-Updated the WANTED page
-Added info to the MT1000, Maxtrac/Radius, Spectra, GM300, and GP300 pages.
July 19, 1998
-Updated the WANTED page
-Minor change to the LM311 substitution into in the RLN4008
-Added CP50/AP50 information
-Made some cosmetic changes to the Keyloader Cable page to make it a bit easier to read
-Added some C source code to the Spectra page for changing the S/N (no idea if this works)
-Added come more out of band mods to the Maxtrac/Radius page for an older version of Maxtrac RSS
-Added a System Watch I/II page with a bit of info
-Made a change to Hoffis' GP300 page to reflect new info regarding the checksum in the codeplug
-Added some new information on Maratrac Out of Band programming
-Added a P50+ page with some programming information
-Added information on the HT90/HT440
-Added a bit of info concerning changing a Syntor X-9000 from 32 to 64 channels.
-Added a listing of RSS error codes for the Radius Series of radios (Radius mobile, GP300, GP350, Maxtrac, etc)
-Added programming information on the MX-350
-Added scanlist programming info for the MT1000
-Added programming cable info for the P1225
-Added a repeater cable for the GM300/M120/M10 radios and a bit of other info on the GM300
-Added the pinout for the GP300/GP350/P110/GTX Portable Service Cable
>-Added a model breakdown chart for the GP300 series of radios
-Added a model breakdown chart for the MTSX series of radios
-Added a page for the G900/MC900/GM1100/GM1200/GM2000/MCX1200/MCS2000/MCX2000/MC2100 series of radios.
June 19, 1998
-Updated the WANTED page
-Updated the Spectra Hi-power programming cable
-Added pinouts for the MSF5000, JEDI Cloning cable, and the MTSX and SM50/120 Accessory connectors
-Added a TX Audio modification for the Maxtrac/Radius series.
-Added another GP300 hacking page by Hoffis.
June 11, 1998
-Updated the WANTED page
-Updated the RIB parts list with some info.
June 7, 1998
-Added a bit of info for the GP68
-Added a page with link for MC Micro/Compact/Centro information
-Added some various pinouts, in particular the Quantar, GTX mobile, GM900
-Updated the Spectra page with some info
-Updated the Syntor/MCX-100 page
-Updated the GM300/GP300/Maxtrac/Radius/SP50/SM50/SM120 pages with a couple of minor changes involving the bandsplit identifier in the table at the top of the .mdf file
-Changed the HT600/MT1000 to make it a bit easier to read
-Developed the theory of adding extra channels to a SM120, try it and see if it works
-Updated the WANTED page
June 5, 1998
-Added our mailing address to the contact page
May 31, 1998
-Updated the WANTED page
-Out of band programming for the System's Saber
-Added some pinouts
-Updated out of band programming for the MTSX/JEDI series of radios
-Updated the MC Micro programming cable pinout
-Added some info about moving a Maratrac into the 6m Ham band
-Info on adding features to a Spectra
-MT1000 MVA pinouts
-Updated out of band programming for the Maxtrac/Radius/GM300/GP300/P110/GP350/SM50/SM120/SP50
-Updated expanded channel info for GP300/P110/GP350/Maxtrac/Radius/SP50
April 10, 1998
-Added GM950 programming cable.
April 4, 1998
-Made a slight change to the HT600/MT1000 page
-Updated the WANTED page
-Added and edited some stuff to the GM300 page
-Added a R100 page with out of band information.
March 31, 1998
-Changed and added a whole mess of things, check it out.
March 21, 1998
-Added copy protection to the cable pinout's (to deter unauthorized copying)
-Fixed error in MCX1000 cable pinout.
January 1, 1998
-Happy New Year!
-Added cable pinouts for the MCS2000, R100, GP900, and TK "Math Device"/Dongle
-Updated some info on the Spectra page regarding A5 to A7 conversions
-Updated the WANTED page
November 25, 1997
-Updated MT2000 and HT600 pages.
November 16, 1997
-Updated all kinds of things, to numerous to list, go check it out :)
September 1, 1997
-Updated the WANTED page
-Added the pinout of the 5 pin Maxtrac/Radius accessory connector
-Added some Saber stuff
-Added some more info about the MX300S
-Added some more info about the Spectra test mode
-Put up a better diagram for the SP50 programming cable
-Added some information about the Maxar50
-Made a minor fix to Hoffis' GP300 page (disabling the RSS' encryption).
July 6, 1997
-Updated the WANTED page
-Updated the pinouts page with pinouts for the MC MICRO/COMPACT/CENTRO, SM120, M1225, SM50
-Updated the Maxtrac/Radius page
-Updated the SP50 programming cable page with a nifty idea for a programming stand
-Updated the Syntor page.
June 8, 1997
-Updated the WANTED page
-Updated the Spectra page to reflect information regarding the password into test mode
-Revised the HT600 programming cable schematic to correct a minor error
-Created a MX-300s page
-Created a MTX-900 page
-Updated the GP350 cable pinout page
-Updated the Cables and Connections page to reflect the fact that the HT600 cable also works on some other radios.
Apr 27, 1997
-Updated the WANTED page
-Added information on programming the SP50 and the Spectra
-Added a Syntor page with a freeware programmer for the Syntor X VHF
-Updated the JT1000 page to include a pinout of the Programming Key
-Updated the Maxtrac page to include a conversion program for figuring out the Hex values when programming the UHF Maxtrac out of band as well as some information on converting a 900 MHz Maxtrac for use in the 900 MHz Ham Band
-Updated the MT2000 page to include information on getting version R03.00.02 RSS to let you program outside the normal UHF bansplit.
Apr 3, 1997
-Re-designed the GP300, GM300, Maxtrac/Radius, and HT1000/Visar pages
-Updated the STX programming cable page with new information
-Updated the WANTED page.
Apr 2, 1997
-Re-designed the color scheme, yet again
-Completed the Advisor programming page.
Apr 1, 1997
-Added lots of cool new info to the GP300 page from another Motorola fan.
Mar 25, 1997
-Updated GP300 page with a note about TK.
Mar 23, 1997
-Made correction to Maxtrac/Radius upgrade info to clairify that the mod will NOT work on a radio without a 16 pin accessory connector.
-Added a page on the Spectra.
-Updated WANTED page.
Mar 20, 1997
-Added some information on the Mostar
-Updated WANTED page.
-Updated the Maratrac out-of-band info to reflect changes in checksum information.
-Updated the Maxtrac/Radius page with the channel increase information.
-Added the pinout for the Astro Saber programming cable.
-Updated the MT2000 page with some new information regarding LAB RSS.
-Updated the GP300 page regarding the change to the newer (>1994) 2 channel radios.
Feb 20, 1997
-Added Maratrac page and out of band programming info for it.
Feb 16, 1997
-Added VHF MCX1000 model chart
-Added out of band programming for the Maxtrac/Radius line
-Corrected RLN4008B RIB schematic, voltage on R3 should be +5VDC
-Added HT50/P100 cable information
-Updated WANTED page.
Feb 15, 1997
-Totally new color scheme (to help those of you with less than 65 thousand color resolution)
-GP350 programming cable added
-Updated GP300 hacking tips
-Out of band programming for MCX1000, HT600, and MT1000 sections added
-Increasing MT2000 A7 max channels.