GM900/MC900/GM1100/GM1200/GM2000/
MCX1200/MCS2000/MCX2000/MC2100

General Information

All of these radios belong to the same family and are covered under the same service manual, hence, most of the information should be common to all models.

BEWARE: Take note of the following we received, "It seems after attempting to write the codeplug of a NEW MCS2000, I got a fail message on the screen. It corrupted the codeplug and this brand new radio had to be sent back to the big M. I talked to the local Motorola dealer and they said that programming these radios with older RSS than they had last been programmed with would indeed corrupt the codeplug".

Pinout for the CS Option Connector

1   A+ CONT
2   +5V
3   2.1 MHz
4   GND
5   DISC
6   9.3
7   AFIC PRE-EMP OUT
8   ASFIC MIC AUD OUT
9   AUX RX IN1
10  UNIV IO
11  GND
12  RESET
13  C CTRL HD2/O KEYFAIL
14  AUX TX IN1
15  RX DATA/KID
16  RTS/DVP WE
17  CLK
18  SPI TX DATA
19  MISO
20  O JABBA INT/C DTMF DATA RDY
21  O JABBA SEL/C DTMF SEL
22  ASN INT/OPT TX
23  ASN SEL/OPT CTSB  
24  N/C
25  RSSI

Pinout for the SS Option Connector

1   A+ CONT
2   +5V
3   2.1 MHz
4   GND
5   DISC
6   9.3
7   AFIC PRE-EMP OUT
8   ASFIC MIC SUD OUT
9   AUX RX IN3
10  UNIV IO
11  GND
12  RESET
13  C CTRL HD2/O KEYFAIL
14  AUX TX IN3
15  RX DATA/KID
16  RTS/DVP WE
17  CLK
18  SPI TX DATA
19  MISO
20  O JABBA INT/C DTMF DATA RDY
21  O JABBA SEL/C DTMF SEL
22  ASN INT/OPT TX
23  ASN SEL/OPT CTSB  
24  N/C
25  RSSI

Pinout for the Accessory Connector

1   SPKR+
2   INT SPKR+
3   SPKR-
4   DIGITAL GND
5   BUSY
6   BUS+
7   I/O 8
8   I/O 5
9   EMERGENCY
10  ANALOG GND
11  FIL AUD OUT
12  AUX RX IN2
13  MIC IN
14  SW B+
15  IGNITION
16  I/O 2
17  LH RESET
18  BUS-
19  SCI RX DATA
20  I/O 4
21  I/O 3
22  RSSI OUT
23  EXTERNAL MIC IN
24  AUX TX IN2
25  UNIV IO OUT

Pinout for the Control Head Connector

1   INT SPKR+
2   INT SPKR+
3   MON/BUSY/OPEN LH RESET
4   PTT/BUS-
5   CLK
6   SPI TX DATA
7   GND
8   RX HI
9   MIC IN
10  C CTRL HD1/O DVP WE
11  C CTRL HD2/O KEY FAIL
12  C CH EN/O KID
13  C VOLUME/O GND
14  C OPT SW B+ SENSE/O BUSY
15  AUX/BUS+
16  +5V
17  PWR ON
18  SW B+

Pinout for the Microphone Connector

1   OPT SW B+
2   SPKR- / KEY LOAD
3   MON / BUSY / KID
4   GND
5   MIC / ON-OFF
6   PTT / BUS- / /WE
7   AUX / BUS+ / KEYFAIL
8   SPKR+ / HANDET AUDIO

Pinout for the Hand-Held Control Head Cable

Radio Connector		Description		Control Head
18 Pin						15 Pin
1			SPKR+				8
2			SPKR-				7
3			HUB				6
4			PTT				2
5			SPI CLK				13
6			SPI DATA			1
7			DIG GND				3
8			N.C.
9			MIC				11
10			A1				4
11			A2				5
12			N.C.
13			WIPER				10
14			N.C.
15			N.C.
16			+5V				15
17			A+				12
18			SW B+				9

Out Of Band Information

Out of band for the GM900/MC2100/MCS2000 is similar to the MTSX out of band hacks.

Pinout for the Accessory Connector Programming Cable

Pinout for the Microphone Connector Programming Cable


Home