If you can help out with any of the following info, email us with a description or attach a gif. We'll post it in the next update so we can help everyone out.
"FTR" Keys
If anyone has information on what is inside these parallel port keys, PLEASE, let us know.
MAXTRAC
We'd like to find a way of getting the silly radio to do something other than 12.5khz steps on 800 MHz (5 or 2.5 khz would be nice :) )
Also looking for a way to change the tune-up frequencies that pertain to the service portion of the RSS. Specifically the frequencies used in the low band (42-50 MHz) models.
GM300/GM350
RSS modification to disable encryption in the codeplug.
Also looking for someone who has been successful in blanking a GM300 logic board and getting it to reinitialize with GM300 RSS
Spectra
The pinout for the Keyloader to Low Power Spectra cable. What the model definitions bits are that reside in the command board and the exact location.
How do you program these radios out of band (further than the RSS will normally allow)?
Anyone have any information on how to connect an Astro Spectra to a 3151 Tone Remote Adapter (TRA), as well as info on how to hook up the TRA to power?
What is the difference between the 5197014A10 & 5197014A11 MLM boards (other than part number and price).
Is it possible to convert a Type II radio back to Type I operation? How?
Anyone have information on the dual radio option using S9000 heads? What's required?
Minitor Pagers
Looking for info on how to convert any of these units to carrier squelch.
Maratrac
Looking for information on using a Syntor X9000 head with a Maratrac. The Texas Highway Patrol uses this setup (you have to program the head with X9000 RSS and the Maratrac with Maratrac RSS). Supposedly it involves adding an interface board to the X9000 head. Anyone know the specifics?
MTSX Series
Need the pinouts for the DB25 connector on the MTSX Convertacom as well as power. The model is NTN1340A.
Anyone know how to edit any of the newer versions of RSS (>6.00) to enable Lab Tools?
DARCOM 9000
Motorola DARCOM 9000 900MHz data radio, any info on out of band.
SYSTEMS SABER
We need a different out of band modification, the one we have doesn't seem to work, other than change what the RSS says the limits are
ASTRO SABER
Anyone know how (if possible) to use a Astro HHCH with the Astro Saber like a deluxe remote mic?
SABER (All)
Looking for the pinout of the Service Cable (programming cable with the RTX4005B connector)
Also looking for a Model Breakdown chart for these radios
MT1000
Any way to get more than 8ch into the scan list for a 99ch radio.
Mostar
Looking for a schematic of the MIB, the service manual 68-P80900Z57-0 doesn't have the schematic in it as far as we know.
GP300 Select-5
Looking for datafile (codeplug) format details. Have someone who'd like to extend S5 sequence length up to 32 tones if possible.
Looking for a way to convert an 8ch radio to 16ch.
Another problem is to decrease the tone length (about 5 ms).
SYNTOR X-9000
Also looking for info on using one control head with 2 drawers (UHF and VHF). We have some of the info, just need some schematics. If anyone has an image of the SP04 firmware for this option, please let us know.
Looking for info on using an "A3" control group on a low band radio (mod # T71kej7j04ak)
Looking for information if anybody has been able to take the ver8.0 syntor X9000, not the E, out of band, have someone who is trying to put 460MHz channels in a 470-482 radio, or 470 channels in a 450-470 radio (within the confines of the vco).
Looking for what and where you need to tell the RSS that there is a VRS (PAC-RT) attached to the radio.
MX300s
Info on the pinout of the accessory connector or the connectors on a "Transpeater" (3, 8 pin + ground tab DIN connectors).
Visar
Any way to convert a 800 MHz trunking radio into a conventional radio.
Any way to convert a Privacy Plus Visar to do Type II trunking?
MSF5000/MTRI2000
Looking for the pin in/out configuration for the installation cable between the MRTI 2000 and the MSF 5000 digital repeater. Motorola part number CDN6017.
Also looking for the pin in/out configuration of the programming cable the MRTI 2000 uses.� Motorola part number 30-80385B23.
Looking for programming algorithms and information for the EPROM versions (non RSS programmable ones)
MX-300T
Heard a rumour that there is a jumper somewhere (JU100?) the convert the radio into a conventional radio rather than trunked. Any truth to this?
Privacy Plus 750/1000
Looking for programming cable information.
Also looking for the pinout of the cable that connects the hang-up box to the radio.
MCS2000
Looking for a model breakdown chart.
MC2100
Looking or info on the protocol used by the accessory connector for remote interfacing.
LT200
Looking for the pinout of the programming cable (if applicable) as well as the pinout of the accessory connector.
M1225ls/P1225ls
Looking for a way to convert them from trunking back to conventional operation, or a way to get more than 2 conventional frequencies programmed into them.
PX300 "Lunchbox" Radio
Looking for the pinout of the 4 pin plug on the battery case for charging.
Also looking for the pinout of the 12 pin plug on the charger, p/n NLN6531A.
Traxar/MCX1000
Looking for the pinouts of a HMN1001B Traxar mic to convert it for use with a MCX1000.
Need the pinout for the programming cable for the hand-held control head radios (see the picture in the Gallery).
Motrac
Looking for modifications to move a 250W base (B94MDB model series)from 450-470 into the ham band without blowing up the doubler/tripler sections
Also looking for the pinout of the microphone connector (4 Pin).
MTX2000
Looking for the name/part number of the RSS used to program these radios. The specific model number is H01RDF9DB5AN. No, MTSX RSS does not work, at least not version 6.0 from what we've been told.
MDC-1200
We have had a number of requests looking for detailed information on this signalling protocol. If anyone has information such as patents, protcol timing and signalling descriptions, please pass it along.
Pro Series Radios
Still looking for out of band info. There seems to be a few versions of RSS depending on the origin of the radio (Latin America, Europe, or North America).
Flashport Radios
Looking for info on what upgrades are available, their part numbers, and the options they add.
If anyone has a used flash upgrade key that they are willing to part with (as we understand it, once it is used, it is no good anymore), we'd like to get our hands on it for some reverse engineering. See our contact information for how to get it to us.
H1011A Paging encoder
Looking for connector pinouts for the connectors on the unit.
MT/MTS2000
Does anyone know how to disable the encryption of the saved codeplug files?
SM50/SportBase
Motorola makes a 25W GMRS radio called the SportBase which would appear to be an SM50. Does anyone know if it can be programmed in any way with RSS?
MC-Micro UHF
Looking for a modification to make these radios 9600 baud packet capable.
GP900
Anyone know if it is possible to convert one of these from 2 to 16 channels? If so, how?
Pro3100
Looking for the pinout of the accessory connector.
PTX 600 and PTX1200
Looking for the programming cable pinout for these MPT radios.
Mocom70
Anyone have out of band modifications for these radios? The email address we had to someone who did is toast.
Centracom II Console
We have had a request for some basic hook-up info for connecting these consoles to radios. Basic pinouts will work or specific examples will be good too. Pinouts of any particular connectors would be good too.
MDT7100 Data Terminal
Chuck is in dire need of a service manual and PROM's for this unit. Can anyone help him (and cc us too)?