MFJ 'Ready-Made' PacketRadio TNC to Transceiver Cables and Diagrams


If you prefer 'ready-made' TNC to Transceiver interface cables, PLEASE note that I have included the MFJ part number(s) for most popular TNC to Radio cable assemblies.
MFJ order line number, pricing, and additional interface information is at the bottom of this page.

CLICK HERE to view the Model MFJ-5020. Use Back' arrow in your browser to return here.

This cable is for Yaesu hand-held radios with the single pin microphone connector such as the FT-50R and FT-50RD.
This cable could be compatible with other radios with the same port configuration. Please check your Yaesu or other radio manual. This cable is for MFJ TNCs and other TNC2 compatibles with 5-pin DIN ports.

CLICK HERE to view the Model MFJ-5060. Use Back' arrow in your browser to return here.

This cable is for Kenwood, Yaesu, and Azden radios with 6-pin Mini DIN Data Ports. This cable could be compatible with other radios with the same Data port configuration. Please check your Kenwood, Yaesu, or Azden radio manual. This cable is for MF J TNCs and other TNC2 compatibles with 5-pin DIN ports.

CLICK HERE to view the Model MFJ-5060YQ Use Back' arrow in your browser to return here.

This cable is for Kenwood, Yaesu, and Azden radios with 6-pin Mini DIN Data Ports.
This cable could be compatible with other radios with the same Data port configuration. Please check your Kenwood, Yaesu, or Azden radio manual. This cable is for the Kantronics KPC-9612 9600 baud port ONLY.

CLICK HERE to view the Model MFJ-5060YV. Use Back' arrow in your browser to return here.

This cable is for Kenwood, Yaesu, and Azden radios with 6-pin Mini DIN Data Ports. This cable could be compatible with other radios with the same Data port configuration. Please check your Kenwood, Yaesu, or Azden radio manual. This cable is for the Kantronics KAM/KAM+ VHF, KPC-3, KPC4, and KPC-9612 1200 baud Port

CLICK HERE to view the Model MFJ-5063 Use Back' arrow in your browser to return here.

This cable is for the following ICOM Radios:
IC-725, 726, 728, 729, 735, 736, 737,737A, 738, 756, 761, 765, 775DSP, 781

This cable configuration could be compatible with other radios with the same Accessory Port configuration. Please check your ICOM Radio manual. This cable configuration uses the 8-Pin DIN Accessory Port, NOT the MIC.

CLICK HERE to view the Model MFJ-5063YH Use Back' arrow in your browser to return here.

This cable is for the following ICOM Radios:
IC-725, 726, 728, 729, 735, 736, 737, 737A, 738, 756, 761, 765, 775DSP, 781

This cable configuration could be compatible with other radios with the same Accessory Port configuration. Please check your ICOM Radio manual. This cable configuration uses the 8-Pin DIN Accessory Port, NOT the MIC.

CLICK HERE to view the Model MFJ-5064 Use Back' arrow in your browser to return here.

This cable is for the following
ICOM VHF transceivers: IC-275. 375, 475, 575, 1275, 820H, 821H
This cable configuration could be compatible with other radios with the same Accessory Port configuration. Please check your ICOM Radio manual. This cable configuration uses the 8-Pin DIN Accessory Port, NOT the MIC.

CLICK HERE to view the MFJ-5064YQ Use Back' arrow in your browser to return here.

This cable is for the following ICOM VHF transceivers:
IC-275. 375, 475, 575, 1275, 820H, 821H

This cable configuration could be compatible with other radios with the same Accessory Port configuration. Please check your ICOM Radio manual. This cable configuration uses the 8-Pin DIN Accessory Port, NOT the MIC. This cable is compatible with the KPC-9612 9600 Baud Port only.

CLICK HERE to view the MFJ-5064YV Use Back' arrow in your browser to return here.

This cable is for the following ICOM VHF transceivers:
IC-275. 375, 475, 575, 1275, 820H, 821 H

This cable configuration could be compatible with other radios with the same Accessory Port configuration. Please check your ICOM Radio manual. This cable configuration uses the 8-Pin DIN Accessory Port, NOT the MIC. This cable is also compatible with the KPC-9612 1200 Baud Port.

CLICK HERE to view the MFJ-5065 Use Back' arrow in your browser to return here.

This cable is for the following ICOM transceivers:
I C-706, IC-706MK II

This cable configuration could be compatible with other radios with the same Accessory Port configuration. Please check your ICOM Radio manual. This cable configuration uses the 13-Pin DIN Accessory Port. This cable is for MFJ TNC's, including the MFJ-1278 series. This cable could be compatible with other TNC2 compatibles. Please check your TNC manual.

CLICK HERE to view the MFJ-5065YH Use Back' arrow in your browser to return here.

This cable is for the following ICOM transceivers: IC-706, IC-706MK II
This cable configuration could be compatible with other radios with the same Accessory Port configuration. Please check your ICOM Radio manual. This cable configuration uses the 13-Pin DIN Accessory Port. This cable is for Kantronics KAM+/KAM HF Port.

CLICK HERE to view the MFJ-5065YV Use Back' arrow in your browser to return here.

This cable is for the following ICOM transceivers: IC-706, IC-706 MKII
This cable configuration could be compatible with other radios with the same Accessory Port configuration. Please check your ICOM Radio manual. This cable configuration uses the 13-Pin DIN Accessory Port. This cable is for the Kantronics KAM+/KAM, KPC3/4 VHF Port. This cable is also for the KPC-9612 1200 Baud Port.

CLICK HERE to view the Model MFJ-5066 Use Back' arrow in your browser to return here.

This cable is for Kenwood radios with 13-pin DIN accessory ports.
This cable could be compatible with other radios with the same port configuration. Please check your Kenwood or other radio manual. This cable is for MF J TNCs and other TNC2 compatibles with 5-pin DIN ports.

CLICK HERE to view the Model MFJ-5066YH Use Back' arrow in your browser to return here.

This cable is for Kenwood radios with 13-pin DIN accessory ports.
This cable could be compatible with other radios with the same port configuration. Please check your Kenwood or other radio manual. This cable is for MFJ TNCs and other TNC2 compatibles with 5-pin DIN ports.

CLICK HERE to view the Model MFJ-5106 Use Back' arrow in your browser to return here.

Pre-Wired Open ended 6-Pin Mini DIN cable Always check continuity between wire colors and cable pins using an ohmmeter.

CLICK HERE to view the Model MFJ-5205 Use Back' arrow in your browser to return here.

Pre-Wired open ended 5-pin DIN cable
Always check continuity between wire colors and cable pins with an ohmmeter.

CLICK HERE to view the Model MFJ-5208 Use Back' arrow in your browser to return here.

Pre-Wired open ended 8-pin DIN cable
Always check continuity between wire colors and cable pins with an ohmmeter.

CLICK HERE to view the Model MFJ-5213 Use Back' arrow in your browser to return here.

Pre-Wired open ended 13-pin DIN cable.
Always check continuity between wire colors and cable pins with an ohmmeter.

CLICK HERE to view the Model MFJ-5220 Use Back' arrow in your browser to return here.

Pre-wired open ended single pin mic cable
Always check continuity between wire colors and cable pins with an ohmmeter.

CLICK HERE to view the Model MFJ-5020YV Use Back' arrow in your browser to return here.

This cable is for Yaesu hand-held radios with the single pin microphone connector such as the FT-50R and FT-50RD.
This cable could be compatible with other radios with the same port configuration. Please check your Yaesu or other radio manual. This cable is for the Kantronics KAM/KAM+ VHF, KPC-3, KPC4, and KPC-9612 1200 baud Port


MFJ Order HOTLINE: 1-800-647-1800

Pricing Information

Model Description Price
MFJ-5020R MFJ TNC to Taesu FT-50R & compatibles $14.95
MFJ-5020RYV KAM VHF KPC3 to Yaesu FT-50R & compatibles $14.95
MFJ-5022 MFJ TNC to Alinco/Standard HT $14.95
MFJ-5022X PK-232 to Alinco/Standard HT $14.95
MFJ-5022YV KAM VHF/KPC3 to Alicno/Standard HT $14.95
MFJ-5024 MFJ TNC to ICOM/Yaesu/Alinco/Standard/RadioShack HT $14.95
MFJ-5024B PK/PacComm/Compatible to ICOM/Yaesu/RadioShack $14.95
MFJ-5024X PK-232 to ICOM/Yaesu/Alinco/Standard/RadioShack HT $14.95
MFJ-5024YV KAM VHF/KPC3 to ICOM/Yaesu/Alinco/RadioShack HT $14.95
MFJ-5026 MFJ TNC to Kenwood HT $14.95
MFJ-5026X PK-232 to Kenwood HT cable $14.95
MFJ-5026YV KAM VHF/KPC3 to Kenwood HT $14.95
MFJ-5060 MFJ TNC to Yaesu ACC -- 6 pin mini-din $14.95
MFJ-5060YH KAM HF to Yaesu ACC -- 6 pin mini din $14.95
MFJ-5064 MFJ TNC to ICOM ACC - 5 pin din $14.95
MFJ-5064YH KAM HF to ICOM ACC - 5 pin din $14.95
MFJ-5066 MFJ TNC to Kenwood ACC 13 pin din $14.95
MFJ-5066YH KAM HF to Kenwood ACC 13 pin din $14.95
MFJ-5080 MFJ TNC to Yaesu 8 pin cable $14.95
MFJ-5080X PK-232 to Yaesu 8-pin cable $14.95
MFJ-5080YH KAM HF Port to Yaesu 8 pin $14.95
MFJ-5080YV KAM VHF/KPC3 to Yaesu 8 pin $14.95
MFJ-5080M MFJ TNC to Yaesu 8 pin modular $14.95
MFJ-5080MX PK-232 to Yaesu 8 pin modular $14.95
MFJ-5080MYV KAM VHF/KPC3 to Yaesu 8 pin modular $14.95
MFJ-5082 8 pin mic open end cable $9.95
MFJ-5084 MFJ TNC to ICOM 8 pin cable $14.95
MFJ-5084X PK-232 to ICOM 8 pin cable $14.95
MFJ-5084YV KAM VHF/KPC3 to ICOM 8 pin $14.95
MFJ-5084YH KAM HF to ICOM 8 pin cable $14.95
MFJ-5084M MFJ TNC to ICOM 8 pin modular $14.95
MFJ-5084MX PK-232 to ICOM 8 pin modular $14.95
MFJ-5084MYV KAM VHF/KPC3 to ICOM 8 pin modular $14.95
MFJ-5086 MFJ TNC to Kenwood/Alinco 8 pin $14.95
MFJ-5086X PK-232 to Henwood/Alinco 8 pin $14.95
MFJ-5086YV KAM VHF/KPC3 to Kenwood/Alinco 8 pin $14.95
MFJ-5086YH KAM HF port to Kenwood/Alinco 8 pin $14.95
MFJ-5086M MFJ TNC to Kenwood 8 pin modular $14.95
MFJ-5086MX PK-232 to Kenwood 8 pin modular $14.95
MFJ-5086MYV KAM VHF/KPC3 to Kenwood 8 pin modular $14.95
MFJ-5088M MFJ TNC to Radio Shack 8 pin modular $14.95
MFJ-5088MX PK-232 to Radio Shack 8 pin modular $14.95
MFJ-5088MYV KAM VHF to Radio Shack 8 pin modular $14.95
MFJ-5088MYH KAM HF to Radio Shack 8 pin modular $14.95
MFJ-5100 Data Radio Cable - MFJ/TAPR $14.95
MFJ-5100X Data Radio Cable - PK-232 $14.95
MFJ-5100YH Data Radio Cable - KPC9612 9600 port $14.95
MFJ-5100YV Data Radio Cable - KAM/KPC3/9612 $14.95
MFJ-5162 MFJ-462B to radio 3.5mm patch cable $4.95
MFJ-5184 MFJ-784B cable pack $7.95
MFJ-5205 Open end cable with 5 pin din $4.95
MFJ-5213 Open end to 13 pin din Kenwood HF ACC $9.95
MFJ-5220R Open end cable for Yaesu FT-50R & compatibles $9.95
MFJ-5222 Open end cable for Alinco Split HT $9.95
MFJ-5224 Open end cable for ICOM/Yaesu/Alinco/RadioShack HT $9.95
MFJ-5226 Open end cable for Kenwood HT $9.95
MFJ-5268 Open end cable with 8 pin modular phine plug $9.95
MFJ-5383I ICOM transceiver interface cable -- 6 pin din $49.95
MFJ-5383K Kenwood transceiver interface cable $49.95
MFJ-5383Y Yaesu transceiver interface cable -- 6 pin din $49.95
MFJ-5383YB Yaesu transceiver interface cable -- mini 6 pin din $49.95
MFJ-5409 6 foot 9 pin serial port for MFJ-493 $12.95
MFJ-5412 IBM Printer cable, 6 foot $9.95
MFJ-5413 RS-232 cable DB-25M-25F, 6 foot $9.95
MFJ-5414 RS-232 cable DB-25M-9F, 6 foot $9.95
MFJ-5425 6 foot 25-pin serial port for MFJ-493 $12.95
MFJ-5803 3 foot Coaxial patch cable with PL-259 $4.95


Back to the PacketRadio TNC to Transceiver diagrams 'MAIN' Page.

If you feel this site is of value to you and other Packet Radio users and System Node Operators, PLEASE LET ME KNOW!
CLICK HERE and send me

TNX es 73 de Buck Rogers K4ABT

ALL MATERIAL, TEXT AND GRAPHICS ON THESE PAGES ARE ©COPYRIGHT of, and by, G. E. "Buck" ROGERS Sr, K4ABT. ALL RIGHTS ARE RESERVED. 1986-1999
Reproduction in any form must have the written permission of the author.

© The "PacketRadio Users Notebook" is © G.E. "Buck" Rogers Sr. 1985 - 1999.

Back to the PacketRadio Networks Home Page.


These pages are created by G. E. "buck" Rogers Sr. K4ABT