GE-ComNET-Ericsson RANGR 050 (supplied as shown), 6 meter FM (voice), 60 watt, 16 frequencies (channels). I customize the EEPROM for your 6 meter frequency and set for any Tx Tones (if required) for repeater access. A 16 position HEXidicimal selector is used to select any one of the 16, programmed into the EEPROM. Tx Repeater access tones are programmed individually with each repeater pair at the time I burn the EEPROM.. if tone access is required. The make channel selections easy, a channel select truth table with your specific channels printed on it, is supplied with the radio. While they last, at $160.00 each. ADD $15.00 for UPS shipping. TOTAL $175.00 These 60 watt RANGR 16 channel's draw 15 amperes on transmit, @ 13.6 VDC. As shown above, it is ready to plug and play. EEPROM programmed with your list of frequencies and tones. Each RANGR carries a 30 day warranty. Sorry; No orders shipped outside the USA. Make Checks or MO payable to; Buck Rogers TOTAL cost (includes shipping; UPS, USA only!) $175.00 Send to: Buck Rogers 115 Luenburg Drive Evington, VA 24550 NOTICE: be sure to include the 16 channels you prefer programmed into your RANGR. Be sure to include any tones that might be required if your repeater requires Tx Tone access.
Mini Control Head mounted on radio, Microphone, External Speaker, Five foot heavy duty power cable, fused at 20 Amperes. Ready to Plug-N-Play. Transceiver ONLY, You provide the TNCee. Email [email protected] for more details.
Your frequency list printout (hardcopies) is included with each RANGR.
NOW, let's consider the possibility that you wish to ''do it yourself''....
The Low Band, High Split RANGR is $120.00 + $15.00 UPS Shipping and Handling.
TOTAL . . . $ 135.00 USA only
For full details of the MODs see the PACKET USERS NOTEBOOK,
March and April 2000, in CQ MAGAZINE.
This drawing illustrates the internal wiring of the Mini-Control head shown on the above GE RANGRs.
Most all parts for these mods can be found at: http://www.packetradio.com/parts.html
This GE PHOENIX SX, 16 Channel, 40 watt transceiver is fully tuned and modified with the VHF Packet frequencies listed below, ready to plug and play.
Channel 1 through 16 Ch Freq 1 144.390 APRS 2 145.010 National Call Freq. 3 145.030 LAN 4 145.050 LAN 5 145.070 LAN 6 145.090 DX Spotting 7 145.570 LAN 8 145.610 LAN 9 145.630 LAN 10 145.650 LAN 11 145.670 LAN 12 145.690 LAN 13 145.710 DX Spotting 14 145.730 ARES/RACES 15 145.750 LAN 16 145.770 SEDANWhen the PHOENIX is turned ON, it defaults to channel 1. When ordering, please specify which frequency from the list that you prefer as the channel (default) frequency.
Power for your TNC is taken from the PHOENIX SX and already to connect to your TNC. The TNC power lead is supplied with the 5.1mm power connector. The transceiver to TNC interface cable is already installed, with a five (5) pin DIN ready to connect to your TNC or NODE (wired to interface to MFJ, PacComm, and AEA/TimeWave PK-900, PK-96 or PK-12.
The GE PHOENIX SX as described (TNC NOT included), is $125.00 + $10.00 UPS Shipping and Handling.
TOTAL . . . $ 135.00 USA only
Limited Supply! Email [email protected] for availability
Send Check or Money Order to; BUCK ROGERS
115 Luenburg Drive
Evington, VA 24550
USA orders only!
Shown here is the DELTA SX 16 channel/frequency 120 watt transceiver. This radio is VHF 144.000 to 148 MHz. tuned and programmed with your Voice and/or 1200 baud Packet frequencies. The 16 channels can be mixed Voice and Packet, repeater offsets, and TX tone access. Frequencies and Tones must be programmed when ordered, so be sure to include your list of 16 voice repeater (and/or Packet) frequencies and any required access tones.
DELTA SX 120 as described above; Price is $220.00 + $15.00 UPS shipping, Total = $235.00.
Send Check or Money Order to; BUCK ROGERS
115 Luenburg Drive
Evington, VA 24550
USA orders only!
Back to the BUX CommCo ·™® Radios and Accessories Home Page.
Back to the AmateuRadio Home Page.
BucK4ABT 