Allow a moment or two for page to load!
Last Update;
We Accept
CLICK HERE for secure, online order form
CLICK here for more HAM Radio Accessories
and Components and Parts, PAGE 1
Allow a moment or two for page to load!
Last Update;We Accept
CLICK HERE for secure, online order form
CLICK here for more HAM Radio Accessories and Components and Parts, PAGE 1
High
Performance, High Gain, and High Power, VHF and UHF Base Station Antenna.
CLICK ON IMAGE TO ENLARGE! |
This "Dis-Kone"
is designed as a monitor antenna for Lo VHF, High VHF and UHF
reception. Many HAMs use it for both transmit and receiving.
|
5/8 wave, two meter (gain) antenna.
|
|||||||||||||||||||||||||||
|
VHF and UHF 'Cross-Needle' High Performance, SWR & POWER Meter
CLICK on the photo to enlarge. For the serious VHF/UHF
operator, here is a 140 to 160 MHz and 440 to 480 MHz, VSWR/POWER meter
with; |
1.7 to 150 MHz, HF & VHF POWER and SWR
Meter with 10 and 100 watt power scales.
Power meter reading scales are 0-10 watts
and 0-100 watts. Power accuracy is 10%, and SWR accuracy is 5% across a
range of 1.7 to 150 MHz. $15.00 |
1.7 to 30 MHz SWR Meter
For the QRP station, here is a 1-10 watt VSWR-Power meter
for the HF QRP station. Meter may be left in-line for constant power
monitoring. |
|||||||||||||||||||||||||||
|
ORDER # shown in first column. |
 |
Dipole
mast-mounted bracket for 'fixed-station', field-day operating, apartment
dwellers, and the RV travelers.
By combining two of the single band HF
whips above, you can have an ideal, single element, (beam) horizontal
dipole. This type antenna opens the world of HF and low VHF communications
for the apartment dweller, RV HAM, field-day operating, and a variety of
other uses and applications. |
|||||||||||||||||||||||||||
HIGH TENSIL STRENGTH
'TEMPERED NYLON' INSULATORS. Perfect to hang your Doublet
Antenna outdoors or in the attic! Now
that you have the PSK31 interface complete, you're ready to hang that 20
meter doublet.... in the attic. That's where I have my 20 meter doublet,
the attic of my garage. I've QSO'd with stations all over the world with
the 30 foot long doublet. It is cut at the center, one of these insulators
are at each end. $1.50 each or 3/$4.00 Order # 3NYLON-INSULAT |
SNAP-ON, "KWIK-Connect" Antenna
adapter.
Often called the mobile antenna, ''Kwik-Disconnect.'' This Mobile Antenna Adapter... is a 'SNAP' to change antennas or bands in a matter of seconds. ORDER # KD-3 |
Set of five (5) Kwik-Connect Antenna
adapters with one snap-on stud.
Make changing mobile antennas a 'SNAP!' with a set of 5 ''Kwik-Disconnect'' adapters. These Mobile Antenna Adapters enable you to change bands in a matter of seconds.
|
|||||||||||||||||||||||||||
2 position HF Antenna Switch
|
4 position HF Antenna Switch
|
6 position HF Antenna Switch
Order # COAXSW-HD6 |
|||||||||||||||||||||||||||
| Two IN, 1
OUT, COAX Antenna Switch.
|
Antenna
Coax Switch; One IN, Three Out, or Three IN, and One OUT 50
Ohm impedance, 3 port to 1 port Antenna Switch. Rated at 1 KW, SO-239 ports, mounted in metal case.
|
COAX
JUMPER CABLES with PL259 connectors installed on each end.
 50 Ohm impedance, 3 ft, 6 ft, 9 ft and 100 feet. These jumpers are made from high quality, low-loss, coax cable with PL-259 connectors installed at each end. Three ft. (3') ORDER # CX3-PLPL $4.00 Six ft. (6') ORDER # CX6-PLPL $4.50 Nine ft. (9') ORDER # CX6-PLPL $5.00 |
|||||||||||||||||||||||||||
100' MINI 8 with PL-259 installed on each end,
|
 This is a sturdy 'straight' spring to attach to the 'ball' mount or the AM304S mount. Threads and stud are 3/8" X 24. For medium duty applications, antennas up to 60 inches long.
|
XTRA,
Heavy Duty Spring for Whips up to 102 inches. The
ever familiar 'HAM' mobile antenna 'barrel' spring to attach the whip to
'ball' mount. Helps prevent breaking that expensive mobile antenna.
Threads and stud are 3/8" X 24. STEEL SPRING, ORDER # S55S
|
|||||||||||||||||||||||||||
 Insulated
Antenna Stud Mount with SO-239 female connector for easy connecting with
PL-259 fitting. Threaded for standard 3/8 X 24 mobile antenna use. $4.00 Order # SM1 |
Mirror-Mount with insulated stud, for 3/8 X
24 thread medium duty mobile antenna mounting.  $7.00
|
 Luggage Rack Mount with insulated stud, for 3/8 X 24 thread medium and light duty mobile antenna installations $6.00 |
|||||||||||||||||||||||||||
Heavy Duty 3-1/2'' ball mount to support that
HF mobile antenna. The ball has 3/8'' X 24 threads, and coax connection is
SO-239. Locking ball swivel mount provides an adjustment to any angle.
Heavy duty Chrome plated ball.
Accepts standard 3/8 x 24 TPI threaded antenna or mounting accessory. Use direct PL-259 connection, or the 'Lug' connection for closer fits.
Ball Mount with SO-239 (female) connector, |
This is a Tee section
Super-Powerful magnet mobile antenna mount, with three, 5 inch Magnets
and 17 feet RG-58 coax with PL-259 connector installed. Super strong,
super holding power in a magnet mount for larger antennas. Three large
magnet mounts with layer of vinyl, for vinyl tops. Accepts standard 3/8
- 24 threaded antennas. |
|
|||||||||||||||||||||||||||
|
Trunk Lip Mount, model NMOTLM is a trunk-lip mount supplied with 17 ft of RG-58 cable and a PL-259. The NMOTLM mounts on a standard trunk lip and comes with 17ft of cable terminated in a PL-259. $10.00 ORDER No. NMOTLM |
TWO, NMO type magnet mounts are
available. NMO35MM is a 3" magnet mount, designed to provide a 50
ohm match through 2 GHz and has a 17 ft of RG-58 cable terminated in a
PL-259 connector. |
This NMO Hole Mount will fit
into a 3/8" hole, or use the adapter (included) to adapt it to a 3/4"
hole. The BUX CommCo NMOH is supplied with 17 ft of 98% shielded $9.00 ORDER No. NMOH |
|||||||||||||||||||||||||||
Dual Band Mobile Antenna with heavy
magnetic mount.
 A dual band mobile mag mount antenna that
is made for use on metal surfaces where holes are not wanted. Magnetic
contact to vehicle provides for capacitive ground coupling and basic
ground plane performance. It's a durable antenna with a punch! |
Operate your hand-held while mobile and
extend your transmit and receive range with this antenna.
The VM101 has a small diameter 'rare-earth' magnet that holds well on most
metal surfaces. Ideal when using your hand-held transceiver in the mobile
with this antenna outside. A cutting-chart is included with the VM101 to
enable setting the antenna for best performance from 137 MHz to 512 MHz. |
896 to 900 MHz, 3dB gain mobile antenna, with elevated feed-point.
The antenna base fits most "NMO" type mounts. NMO mount not included See NMO mounts below!
$8.00 each
"Trunk Lip" NMO 3/8" or 3/4" hole NMO mount: 3-1/2" NMO Magnet Mount 5" NMO Magnet Mount All NMO mounts listed above come with 17' RG58 coax and
(UHF male) PL259 connector attached. |
|||||||||||||||||||||||||||
 |
Replacement Heavy duty, Hardened, Nylon, Shoulder washer insulators, same as shoulder washers in SM1 Stud-Mount. 3 / $1.00
|
Complete
PSK31/RTTY/SSTV |
Back
to BUX CommCo HOME Page.
Back to the PSK31
interface Page.
BUX CommCo Electronic Kits for the HAM, Hobbist, and Experimenter.
Copyright
� 1996-1997-1998-1999-2000-2001 by BUX CommCo ��
All Rights Reserved
EMAIL [email protected]
Two
(2) antenna to one (1) radio COAX switch. Shielded, and rated at 1 KW. 
