ALINCO 8 PIN MIC PORT TO THE "BAYPAC"

Alinco 8 Pin Mic I/O to BayPac BP-2 and BP-2M

NOTE: The wiring of the radio to BayPac interface MUST BE WIRED EXACTLY as shown. If you cut a telephone interconnect cable, fitted with RJ-11's at both ends, in half, one end will NOT be color wired as shown. Your best option might be to order the correct color coded, pre-wired connector from TigerTronics. it's a buck and an half!

The following text provides additional information for PC comport and radio interfacing.

If your computer comport has a 9 pin (DE9) comport, use a "shielded" adapter cable
wired as follows: 

             DE9 Pin (COMport)         25 Pin (BayPac)
            
                  3 - - - - - - - - - - 2
                  7 - - - - - - - - - - 4
                  8 - - - - - - - - - - 5
                  6 - - - - - - - - - - 6
                  5 - - - - - - - - - - 7
                  4 - - - - - - - - - - 20

 

The Radio port interface to the BayPac utilizes an RJ-11 4 PIN Telephone type connector:

1)	Connect the microphone input to the YELLOW wire of the BayPac RJ-11 connector.
2)	Connect the radio ground/shield lead to BLACK wire of the  BayPac RJ-11 connector.
3)	Connect the radio PTT input of the radio to RED wire of the  BayPac RJ-11 connector.
4)	Connect the radio external speaker to GREEN wire of the BayPac (see text below).

Connect External Speaker to the speaker output of the radio.