BUX CommCo
115 LUENBURG DRIVE
EVINGTON, VIRGINIA 24550
Last Update;We Accept
![]()
SECURE, On-line order form, Click Here!
FAX or Mail order form, Click Here!VHF/UHF Beams and other antennas, Click Here!
High Performance, High Gain, Dual Band, Base Station Antenna 5/8 wave, vertical stacked collinear design
2-5/8 elements on 2mt., 4-5/8 elements on 70cm.
6 db @ 2 meters and 8 db 70cm.
Factory tuned, Superior wideband performance
Heavy duty fiberglass radome
Durable, waterproof joints
Mounting Hardware included
Accepts standard PL-259 connector
200 Watt power rating
Radiating element, 100 inches.
DC ground, enclosed elements reduces terrestrial noise.
$64.00 each
Order # UVS200-BAFeed that Dual-Band antenna using this High-Performance Duplexer.
Port 1 = 2 meter
Port 2 = 70 cm
$34.00 each
Order # DU-5005/8 wave, two meter (gain) antenna.
Durable, light weight, and easy to install. I installed this 5/8 wave, two meter base station antenna atop a 30 foot mast and was on the air is less than 30 minutes after opening the package. Comes complete with mounting bracket and hardware.
$24.00
Order # 58BASE2MSorry, We do not ship COD, and we do NOT ship "antennas" outside the continental USA.
Foreign antenna shipping charges are extreme, too many CODs returned,
and too may foreign shipped antennas returned.VHF and UHF 'Cross-Needle'
High Performance, SWR & POWER MeterCLICK on the photo to enlarge.
For the serious VHF/UHF operator, here is a 140 to 160 MHz and 440 to 480 MHz, VSWR/POWER meter with;
10 - 100 - 1000 watt scales.
Order # SWR-6 $59.00SWR & WATT METER
This is a handy, compact meter for designed for the amateur radio operator for checking transmitter operation. May also be used as a RF field strength meter.
SPECIFICATIONS
SWR:
RF- Power
Accuracy
Impedance
Frequency Range
Indicator
Antenna
Dimensions1:1 to 1:3
0-10 watts and 0-100watts
SWR 5% RF-Power 10%
52 ohms
1.7MHz to 150 MHz
200 DC Micro-ammeter
5 inches antenna
6" X 2" X 2" SWR-3 $18.001.7 to 30 MHz SWR Meter
For the QRP station, here is a 1-10 watt VSWR-Power meter for the HF QRP station. Meter may be left in-line for constant power monitoring.
$8.00
Order No. SWR-QRPSorry, We do not ship COD, and we do NOT ship "antennas" outside the continental USA.
Foreign antenna shipping charges are extreme, too many CODs returned,
and too many foreign shipped antennas returned.
Mobile (loaded) antennas
Order number in left column below.
BHF 75M 75 METER
3/8" X 24 THREAD
8 feet long$18.00 BHF 40M 40 METER
3/8" X 24 THREAD
8 feet long$18.00 BHF 30M 30 METER
3/8" X 24 THREAD
8 feet long$18.00 BHF 20M 20 METER
3/8" X 24 THREAD
8 feet long$18.00 BHF 17M 17 METER
3/8" X 24 THREAD
8 feet long$18.00 BHF
15M15 METER
3/8" X 24 THREAD
8 feet long$18.00 BHF 12M 12 METER
3/8" X 24 THREAD
8 feet long$18.00 BHF T10M 10 METER
3/8" X 24 THREAD
8 feet long$18.00 BVHF 6M 6 METER
3/8 " X 24 THREAD$18.00 BVHF 2M 2 METER
3/8 " X 24 THREAD
20 inches$10.00 ORDER # shown in first column.
Dipole mast-mounted bracket for 'fixed-station', field-day operating, apartment dwellers, and the RV travelers.
By combining a pair (two) of the single band HF (VHF) whips at left, you can have an ideal, single element, horizontal dipole (beam). This type antenna opens the world of HF and VHF communications for the apartment dweller, RV HAM, field-day operating, and a variety of other uses and applications.
Shown mounted on 1 & 1/4" mast.
Antenna(s) Not Included.
$18.00 each
ORDER No. DABRKT
When you see me in QSO on 20 meter PSK31, I am using this antenna mount with two of the BHF-20 M antennas at 30 ft. An FT-817 at 7 watts PEP, ... worked 50 + countries... . . . ->
UH-2401 UHF
BASE STATION
Antenna.
Frequency Range:
430-490 MHzGain: 6.5dB
Power Rating:
200 wattsImpedance:
50 OhmsStainless Steel
RadialsSO-239 Input
connectorRadiating element
length 5 feet.Built to Commercial standards for
base station installations, and rugged,
mountain-top repeater applications.Mounting hardware and stainless-steel
radials included.$54.00
ORDER No. UH-2401ANTENNA INSULATORS
Weatherproof, (TENYTE) insulators. Perfect to hang your antenna outdoors or in the attic!
Now that you have the PSK31 interface, you're ready to hang the doublet.... in the attic. That's where I have my 20 meter doublet, the attic of my garage. I've QSO'd with stations all over the world with the 30 foot long doublet. It is cut at the center, one of these insulators are at each end. Also great for other HF dipole/doublet antennas. Dielectric strength is comparable to its ceramic predecessor without susceptibility to cracking or breakage under impact or severe temperature change.
Package of 3
3ANTINS $3.90SNAP-ON, "KWIK-Connect" Antenna adapter. Often called the mobile antenna, ''Kwik-Disconnect.'' This Mobile Antenna Adapter... is a 'SNAP' to change antennas or bands in a matter of seconds.
order no. KD-3 $5.90 eaSet of five (5) Kwik-Connect Antenna adapters with one snap-on stud.
Make changing mobile antennas a 'SNAP!' with a set of 5 ''Kwik-Disconnect'' adapters. These Mobile Antenna Adapters enable you to change bands in a matter of seconds.
ORDER No. KD-5
$15.00 per set
2 position HF Antenna Switch
Two (2) position antenna switch. Select one of 2 antennas.. 1.8 - 30 MHz. Connectors are standard SO-239. Hi-Power rating for 50 - 75 Ohm loads.
Order # COAXSW-HD2
Price: $14.95
4 position HF Antenna Switch
Four (4) position antenna switch. Select any one of 4 antennas.. 1.8 - 30 MHz. Connectors are standard SO-239. Hi-Power rating for 50 - 75 Ohm loads.
Order # COAXSW-HD4
Price: $24.956 position HF Antenna Switch
Six (6) position antenna switch. Select any one of 6 antennas.. 1.8 - 30 MHz. Connectors are standard SO-239. Hi-Power rating for 50 - 75 Ohm loads.Order # COAXSW-HD6
Price: $34.95Two IN, 1 OUT,
COAX Antenna Switch.
Two (2) antenna to one (1) radio COAX switch. Shielded, and rated at 1 KW.
$8.00 each
Order # COAXSW2
Antenna Coax Switch; One IN, Three Out, or Three IN, and One OUT
50 Ohm impedance, 3 port to 1 port Antenna Switch.
Rated at 1 KW, SO-239 ports, mounted in metal case.
Order # CX3
$9.00
COAX JUMPER CABLES with PL259 connectors installed on each end.
50 Ohm impedance, 3 ft, 6 ft, 9 ft and 100 feet. These jumpers are made from high quality, low-loss, coax cable with PL-259 connectors installed at each end.
Three ft. (3')
ORDER # CX3-PLPL $4.00
Six ft. (6')
ORDER # CX6-PLPL $5.00
Nine ft. (9')
ORDER # CX6-PLPL $6.00100' MINI 8 with PL-259 installed on each end,
ORDER # 100M8-PLPL $30.00This is a sturdy 'straight' spring to attach to the 'ball' mount or the AM304S mount. Threads and stud are 3/8" X 24. For medium duty applications, antennas up to 60 inches long.
STEEL SPRING, $7.00 each
ORDER # S35CXTRA, Heavy Duty Spring for Whips up to 102 inches.
The ever familiar 'HAM' mobile antenna 'barrel' spring to attach the whip to 'ball' mount. Helps prevent breaking that expensive mobile antenna. Threads and stud are 3/8" X 24.
STEEL SPRING,ORDER # S55S
$9.00 each
Insulated Antenna Stud Mount with SO-239 female connector for easy connecting with PL-259 fitting. Threaded for standard 3/8 X 24 mobile antenna use.
$4.00
Order # SM1
Mirror-Mount with insulated stud, for 3/8 X 24 thread medium duty mobile antenna mounting.
$7.00
Order # AM304S
Luggage Rack Mount with insulated stud,
for 3/8 X 24 thread medium and light duty
mobile antenna installations$6.00
Order # LRMHeavy Duty 3-1/2'' ball mount to support that HF mobile antenna. The ball has 3/8'' X 24 threads, and coax connection is SO-239. Locking ball swivel mount provides an adjustment to any angle. Heavy duty Chrome plated ball. ![]()
Accepts standard 3/8 x 24 TPI threaded antenna or mounting accessory. Use direct PL-259 connection, or the 'Lug' connection for closer fits.
Ball Mount with SO-239 (female) connector,
ORDER # AM601-SO
$14.00 each
Ball Mount with terminal lug connection,
ORDER # AM601-LUG
14.00 each
This is a Tee section Super-Powerful magnet mobile antenna mount, with three, 5 inch Magnets and 17 feet RG-58 coax with PL-259 connector installed. Super strong, super holding power in a magnet mount for larger antennas. Three large magnet mounts with layer of vinyl, for vinyl tops. Accepts standard 3/8 - 24 threaded antennas.
$36.00 each Shipping wt = 10 Lbs.
ORDER No. T3MAGMNT
"Super" Magnet 95 lb. pull strength. This powerful 5 inch magnet comes with 17 feet RG 58 coax with PL-259 connector. It has the standard antenna 3/8" X 24 female threads. A strong magnet mount for HAM type mobile antennas. Prewired with 17" RG58 cable PL-259 connector.
$18.00 each
ORDER # 5MAGMNT
Shipping Wt = 5 Lbs each
Trunk Lip Mount, model NMOTLM is a trunk-lip mount supplied with 17 ft of RG-58 cable and a PL-259. The NMOTLM mounts on a standard trunk lip and comes with 17ft of cable terminated in a PL-259.
$10.00 ORDER No. NMOTLM
TWO, NMO type magnet mounts are available. NMO35MM is a 3" magnet mount, designed to provide a 50 ohm match through 2 GHz and has a 17 ft of RG-58 cable terminated in a PL-259 connector.
$15.00 Order # NMO35MM
NMO55MM is a heavy-duty 5" magnet with 17ft of RG-58 cable terminated in a PL-259 connector.
$18.00 Order # NMO55MM
This NMO Hole Mount will fit into a 3/8" hole, or use the adapter (included) to adapt it to a 3/4" hole. The BUX CommCo NMOH is supplied with 17 ft of 98% shielded
RG-58 cable terminated into a PL-259 UHF connector. Cables are attached at right angles to the mount. Mounts also include a built-in seal around the mounting hole to protect from moisture.$9.00 ORDER No. NMOH
Dual Band Mobile Antenna with heavy magnetic mount.
A dual band mobile mag mount antenna that is made for use on metal surfaces where holes are not wanted. Magnetic contact to vehicle provides for capacitive ground coupling and basic ground plane performance. It's a durable antenna with a punch!
This mobile antenna is supplied with 14 feet of RG-58/U and PL-259 connector attached. Ready to use.
$15.50 each
Order # VU1510Operate your hand-held
while mobile and extend
your transmit and receive
range with this antenna.The VM101 has a small diameter 'rare-earth' magnet that holds well
on most metal surfaces. Ideal when using your hand-held transceiver in
the mobile with this antenna outside. A cutting-chart is included with the VM101 to enable setting the antenna for best performance from 137 MHz
to 512 MHz. This antenna is
supplied with 9 feet of coax with
BNC connector attached. Ready
to use.
$11.00 each
Order # VM101-MA 896 to 900 MHz, 3dB gain mobile antenna, with elevated feed-point.
The antenna base fits most "NMO" type mounts. NMO mount not included See NMO mounts below!
$8.00 each
Order No. MAX900"Trunk Lip" NMO
$10.00
ORDER No. NMOTLM3/8" or 3/4" hole NMO mount:
$8.50 ea, ORDER No. NMOHOLE3-1/2" NMO Magnet Mount
$15.00 ea. ORDER No. NMO35MM5" NMO Magnet Mount
$18.00 ea. ORDER No. NMO55MMAll NMO mounts listed above come with 17' RG58 coax and (UHF male) PL259 connector attached.
UHF Female to Mini UHF male adapter:
$3.50 each ORDER No. AT7610
Unity Gain mobile whip antenna with stainless-steel spring, PL-259 base, and chrome fittings. Overall length is 21 inches. Cutting chart is included. Mounts on SO-239 type base (not supplied). See AM-101 at right.
$8.50 ORDER No. VH-1208
AM-101Superior, low-profile, 3.5 inch, 12 pole magnet mount with 17 feet of 98% shield, ultra-low-loss, RG-58A/U coaxial cable, fitted with PL-259 coax male connector. The perfect companion for the VH-1208 whip shown at left. The SO-239 base mates the base connector of the VH-1208 and similar antennas.
$12.50 ORDER No. AM-101
Order the Combo!
Both, VH-1208 antenna and AM-101 magnet mount.$18.00 ORDER No. 1208-101
Replacement Heavy duty, Hardened, Nylon, Shoulder washer insulators, same as shoulder washers in SM1 Stud-Mount.
3 / $1.00
Order # SM1SW
This "Dis-Kone" is designed as a monitor antenna for Lo VHF, High VHF and UHF reception. Many HAMs use it for both transmit and receiving.
Order No. DISKONE $29.00YES, we have them in Stock!
NMO Mount CAP.
Cap/cover the NMO mount when not in use. Comes in basic gloss black. The NMO cover with built-in "0-Ring" seal.
Order No. NMOCAP $2.00 each
Here it is.. That "Hard-to-find" plug for the AEA PK-232 TNC.
ORDER No. 232P5
.75 each or 3/$2.00
Order No.
232P5 .75 each or 3/$2.00
Want to make that (4, 6, or) 8 pin mic extension? . . now you can, with this in-line, male microphone connector. Same gender as the 4, 6, and 8 pin male connectors on most HAM transceivers, except, this one is an in-line connector. The CE-8 is shown here, and can be ordered in three versions:
8 pin=C8E, 6 pin= C6E, and 4 pin=C4E.
Use to make microphone extension cables.
8 pin, Order No. C8E $3.006 pin, Order No. C6E $3.00 4 pin, Order No. C4E $3.00 CLICK HERE for RF Connectors and Adapters
BUX CommCo
115 LUENBURG DRIVE
EVINGTON, VIRGINIA 24550We Accept
![]()
SECURE, On-line order form, Click Here!FAX or Mail order form, Click Here!
Back to the PSK31 interface Page.
BUX CommCo Electronic Kits for the HAM, Hobbist, and Experimenter.
Copyright � 1996-1997-1998-1999-2000-2001 by BUX CommCo ��
All Rights Reserved
EMAIL [email protected]
Web Page Design and HTML By
![]()
G. E. 'Buck' Rogers Sr K4ABT d/b/a BUX CommCo tm � & � and is a trademark of;
G.E. "Buck" Rogers Sr., Communications Consultants
Copyright � 1996--2001
All Rights Reserved