BUX CommCo,

Our customers write, " . . .

From: Larry, KA4QZQ

Sent: Thursday, February 28, 2002 10:32 AM

To: [email protected]

Subject: R-TT5PD

The nice little RASCAL box arrived about 1/2 hour ago and the hook up was simple enough. Now I've gotten rid of all my jury rig cables and especially the noise I had before in my desk top speakers of my computer.

Thanks a lot for a fine and inexpensive unit for PSK. I'm back in business as I had just purchased my new

Ten-Tec Jupiter 538 and it's working just great.

Larry, KA4QZQ

From: Joe KC8RKL
Sent: Sunday, February 24, 2002 6:16 AM
To: [email protected]
Subject: RASCAL Kit

Buck-

Had to drop you a line. I ordered a RASCAL interface kit for my Kenwood TS-570 early last week and received it Friday. I assembled it yesterday (Saturday) a.m., loaded the WinPSK 2.11 software you *also* provided, poked around the software for a while, made the requisite adjustments (per your great advice), ..

....and my first PSK contact was Roger W2INY in Sarasota, FL in mid afternoon on 20 meters.

Later in the evening, after setting up some macros, I QSO`d Georg DJ9LJ (Germany) and Paul HA3HV (Hungary)- all on 35 watts and an attic dipole.   Wow!

Having a blast. Thanks very much.

VY 73

Joe KC8RKL

From: M Wagner,   K8SWL
Sent: Monday, February 11, 2002 5:29 PM
To: [email protected]
Subject: Received Rascal Kit –Thanks

Buck, Received Rascal Kit today.

Great service, mail money order to you on Monday, receive kit the next Monday.

It doesn't get any better!!!!

Thanks

Mike K8SWL

From: Ronald    ke4vpn

Sent: Sunday, February 10, 2002 6:43 PM
To: [email protected]
Subject: Rascal came in and works FB

Hello Buck

Thanks for the quick shipping on the Ten Tec Pegasus Rascal interface, it works fine business. No problem at all with PSK31 or SSTV. I did not know the first thing about the modes and it was nice to get a product that works first time. I don't usually write vendors but I am so pleased with the product that I thought I would let you know.
73 de ke4vpn

Ronnie

-----Original Message-----
From: John--K3MZV
Sent: Saturday, February 02, 2002 10:42 AM
To: [email protected]
Subject: Good Job

Buck:

Received the Rascal R-5 Today --Great service.

The Rascal does a good job with my IC-735.

Thanks for a good product,

John--K3MZV

From: Brad, W4INT

Sent: Wednesday, January 30, 2002 6:51 PM

To: [email protected]

Subject: RE: RASCAL

Hello there,

Just though I would drop you a short note to say thank you for the great product!

I followed your instructions and even with the kids constantly asking questions had the
RASCAL kit together and working in less than 1.5 hours.

It works great as I have made numerous PSK31 contacts and now am working SSTV.
If I can ever be of a help to you in showing your product of giving a demo to HAMs in
my area please put my name on the list.

73 de W4INT

From: John,   KE3QG

Sent: Tuesday, January 29, 2002 8:54 AM
To: '[email protected]'
Subject: good stuff

I recently ordered a RASCAL for my ICOM 735, and your CD-ROM. The RASCAL hooked up very easily and the documentation was good.

With the programs on the CD-ROM, I didn't even have to download any software from the Internet.
As such, I was up and working both SSTV and PSK31 the day your shipment came (which was very prompt).

I highly recommend your products to anybody looking to get on the air quickly with these modes.

Thanks for the great products!   John,   KE3QG

From: W4MCQ
Sent: Saturday, January 26, 2002 2:37 AM
To: [email protected]
Subject: rascal interface

I just received my Rascal.   Hooked it up & works great !    Worth every penny !!!

Thanks !   Bruce W4MCQ

From: Roy
Sent: Saturday, January 12, 2002
To: [email protected]
Subject: Thanks for your quick shipment

Hello,

This is just a short note to tell you Thanks again for getting my order out so quick.

Last weekend I ordered one of your RASCAL's and it arrived this Friday evening. Got it hooked up and receiving Friday night. Finally found all the correct software menu settings (both radio and computer software) and made several PSK31 contacts today.

It works GREAT.

Thanks again,

Roy,   K5RLE

I got it! Worked with so much ease I couldn't believe it. You have done a great job with the RASCAL.

I have placed you on my web sites as a featured link www.w2blc.com and www.txrad.net

73, and keep up the good work.

Bill W2BLC/WA4BLC

It is A O.K. You did a great job building my RASCAL. My age is 72 and I enjoy amateur radio.

Best wishes to you for the new year. 73 Chuck     n4mis

From: Patrick
To: BUX CommCo
Subject: FT-817 interface issues

Buck, Just some feedback on your FT-817 interface.

I've been using it for a couple of weeks now and it works great, I did have a little trouble getting my FT-817 to modulate and had to adjust the level on the Rascal and set the sound card out level.   I have built your interface for my ICOM 718 and did not have any problems.

From: Charles
Sent: Saturday, September 29, 2001 1:54 PM
To: [email protected]

I want to say that I enjoy psk31 very much and your RASCAL 5 makes it so easy!

Thanks much,

Charles/W5CDS

From: Eric [kg4lul]
Sent: Thursday, September 13, 2001 2:38 AM
To: [email protected]
Subject: RASCAL - Thank You!

Thank you for fulfilling my order so quickly!   The RASCAL works great!!!!

From: MAC [w9iv]
Sent: Sunday, July 29, 2001 1:39 PM
To: Buck Rogers, K4ABT
Subject: RASCAL PSK INTERFACE

This is a "thank-you" message, Buck, to tell you that the RASCAL PSK interface which I ordered from you a few days ago has arrived, been installed, and is working perfectly. The promptness with which you responded to my initial inquiry, and the promptness with which you shipped the product, were truly impressive.

If you ever need a happy customer to recommend you and/or your products, just call on me; I'll respond in the same great fashion that you displayed to me!

                 73,   MAC, W9IV

From: Gary
Sent: Tuesday, December 11, 2001 7:16 PM
To: [email protected]
Subject: Rascal

I wanted to let you know how great I think the rascal I purchased from you is. It was so easy to hook up and with the software you sent I had it up and running in less than 30 minutes. I will be purchasing more and recommending it to anyone wanting to get started with PSK31.

Thanks, 73

Gary

From: Art
Sent: Tuesday, November 27, 2001 9:18 AM
To: [email protected]
Subject: Re: Order

Thank you! Order received and working well.
Very nice system you have developed. Installed easily and was up and running within minutes of arrival.
Thanks for such good service and a nice product!
Art K6ALC

From: G0NCS
Sent: Monday, November 12, 2001 11:01 AM
To: [email protected]
Subject: thanks

hello om thank you for the rascal unit which arrived safe and well, i was on the air within ten minutes working like a dream come true, a very nice bit of kit more than pleased hope to be in contact soon.

thanks a lot de g0ncs tim

From:                     Hesh
Sent:                      Tuesday, September 04, 2001 8:16 AM

To:                         'BUX CommCo'

Subject:                 RASCAL

Hi… I received the ‘Rascal’ - it works great!

Thanks

Hesh N1MDX

Sent: Monday, December 31, 2001 4:27 AM

To: [email protected]

Subject: Happy holidays, TNX for everything in '01

Hi Buck:

I just wanted to say thanks all the good products and support

I'm using the PSK31 interface, it's working great. Your website is

great place to find all kinds of info.

Again thanks, happy holidays and may the good Lord take a liking to you!

Hank - N8DOE

Sent: Wednesday, October 10, 2001 3:02 PM
To: k4abt
Subject: HI

Heard you on the air the other day. Condx were poor or I would have given you a call.

Love my RASCAL.

Bob, K6VIB
Quartz Hill, Ca.

Sent: Tuesday, December 11, 2001 8:07 PM

To: [email protected]

Subject: Praise

I just wanted to thank you for a wonderful product. I ordered your RASCAL

kit for my Kenwood TS-130 last week. I received it on Monday of this week

and already have it assembled and on the air.

73, Russ

.... and the list goes on... , we thank you, es the best 2 U in 2002

73 de G. E. "Buck" Rogers Sr., K4ABT
E-mail BucK4ABT

We Accept

BACK TO, the PSK31 Interface Home page.