®
™BUX CommCO, RASCAL, and the RASCAL logo are registered trademarks of BUX CommCo Inc.
115 LUENBURG DRIVE EVINGTON, VIRGINIA 24550 -1702 FAX 434 525 7818
HAMs "Helping All Mankind"
RASCAL®™ PCB parts layout overview and example diagram..↓
NOTE that when compared to other, more expensive interfaces that DO NOT process the receive audio, the RASCAL processes both Receive and Transmit audio via audio isolation transformers. This Rx and Tx audio isolation prevents ground loop coupling, and reduces the chance of RF feedback into the PC sound card (squeals, hum, etc).
To further reduce RF feedback and RF ingress into the Tx or Rx sound card audio, we install a large (molded) ferrite core over the RASCAL to sound card audio I/O cable(s).
The end result is a clean, and good (IMD) on-the-air signal with your PSK, SSTV, and related digital modes.
The "complete package"
Kit contains all
cables, connectors, components, circuit board and case;
BACK; to the PSK31
interface Home Page
Wired & Tested RASCAL Mark ,V CLICK HERE!,
|
RASCAL™® NOTE, A COMPLETE DOCUMENTATION PACKAGE, (SPECIFIC TO YOUR KIT), IS INCLUDED WITH EACH RASCAL™®. THE SCHEMATIC SUPPLIED WITH YOUR RASCAL MODEL IS A COMPLETE DRAWING AND INTERCONNECT DIAGRAM FOR YOUR SPECIFIC RADIO. ALL CONNECTORS DISPLAY THE INPUT, OUTPUT, AND PTT PINS WITH CORRESPONDING PIN NUMBERS. DON'T BE MISLED BY THOSE WHO SHIP YOU A $100.00 INTERFACE, ONLY TO LEARN LATER THAT YOU MUST ORDER A $40 SET OF CABLES SO YOU CAN USE THE INTERFACE YOU JUST RECEIVED. THE RASCAL™® IS SUPPLIED WITH A COMPLETE SET OF CABLES AND CONNECTORS FOR BOTH YOUR PC AND YOUR TRANSCEIVER CONNECTIONS, NO SURPRISES, AND NO ADDED COSTs. Kit contains all cables, connectors, components, circuit board and case; |
Interface Home Page, for Sound Card to Radio, PSK31, SSTV, Packet, RTTY, MFSK, WSJT, JT44, and more.
RASCAL and
BUX CommCo are
®™
by G. E. Rogers Sr.
The "PacketRadio Users
Notebook" is © G.E. "Buck" Rogers Sr. 1985 - 2003.
More than 5 million visitors
since January 2001.