®™

Warehouse 209;  Office 211;  Luenburg Drive; Evington,  VA 24550             FAX 434 525 7818

Got more than one transceiver.? Now you can operate the sound card modes without buying additional interfaces.  You can easily change from the HF transceiver to your VHF/UHF transceiver by simply unplugging the HF cable from the RASCAL Mark Vplus and inserting another cable for a different transceiver.  Do them all, PSK31, SSTV, Packet, MT63, RTTY (FSK & AFSK), eQSO, EchoLink, APRS, CW and much more, with different transceivers using only one RASCALmkV. RASCAL mark V plus is wired, tested, and ready to ship!

IMPORTANT !      Read this !

RASCAL Mark V Plus Engine is shown above  Operating modes include; PSK31, SSTV, PACKET, MT63, RTTY/FSK, RTTY/AFSK, eQSO, EchoLink, APRS, CW and many more.  The applications of this RASCAL + are  limited only by the capabilities of your transceiver. 
RASCAL to Radio cable NOT included
. Choose Interface cable(s) from list below.
    
                      RASCAL Mark V Plus Engine  $39.50

                                      Interface cables are $14.50 each.
Select interface cable(s) specific to your transceiver(s) from the large selection shown below.  Include CBL part number on order form.   
NOTE that when compared to other, more expensive interfaces that DO NOT process the receive audio, the RASCAL processes both Receive and Transmit audio via audio isolation transformers.  This Rx and Tx audio isolation prevents ground loop coupling, and reduces the chance of RF feedback into the PC sound card (squeals, hum, etc).  To further reduce RF feedback and RF ingress into the Tx or Rx sound card audio, we install a large (molded) ferrite core over the RASCAL to sound card audio I/O cable(s). The end result is a clean, and good (IMD) on-the-air signal with your PSK, SSTV, Packet, and other digital modes.

ALINCO

PART NUMBER DESCRIPTION, Make and Model of Transceiver PRICE Each
CBL-AL8M Alinco 8 pin screw-on mic & Ext Spkr I/O   $14.50
CBL-20 Alinco Hand-Helds with 2.5mm & 3.5mm I/O  $14.50
CBL-AL45 Alinco RJ45 I/O modular connector
For ALINCO model: DR-605
$14.50
CBL-AL6A Alinco 8 pin screw-on mic with receive AF at pin 6 
For ALINCO models: DX-70, DR-119, DR-1200
$14.50
     
CLICK HERE for secure, OnLine ORDER FORM.
CLICK HERE for a "PDF format" Order form, to print and Mail or FAX,

AZDEN

PART NUMBER DESCRIPTION, Make and Model of Transceiver PRICE Each
CBL-MDIN AZDEN 6 pin Mini DIN  for PCS 9000 Data Port $14.50
     
CLICK HERE for secure, OnLine ORDER FORM.
CLICK HERE for a "PDF format" Order form, to print and Mail or FAX,

COLLINS

PART NUMBER

DESCRIPTION, Make and Model of Transceiver

PRICE Each

CBL-75767

Collins transceivers with Patch IN, Patch OUT, and PTT RCA jacks

$14.50

CBL-CW

RASCAL to transceiver cable for hard-keyed CW operating $14.50
     

CLICK HERE for secure, OnLine ORDER FORM.
CLICK HERE for a "PDF format" Order form, to print and Mail or FAX,

DRAKE

PART NUMBER

DESCRIPTION, Make and Model of Transceiver

PRICE Each
CBL-TR7

DRAKE 4 pin screw-on mic with 1/8" Ext Spkr jack
Models  TR-7 or TR-7/A, and some  TR-22, TR-33, TR-7, UV-3 radios

$14.50
CBL-TT25 DRAKE TR-4, TR-4C, TR-4CW, and TR-6 radios.
Only  the standard 1/4 inch Stereo plugs are supplied!  SwitchCraft 230 (Collins) type 3-circuit MIC plug are NOT included. Similar interface to Drake "TWINS." (R4B & TX4B)
$14.50

CBL-CW

RASCAL to transceiver cable for hard-keyed CW operating $14.50
     
CLICK HERE for secure, OnLine ORDER FORM.
CLICK HERE for a "PDF format" Order form, to print and Mail or FAX,

ICOM

PART NUMBER DESCRIPTION, Make and Model of Transceiver PRICE Each
CBL-IC8M

ICOM HF, VHF,/UHF Transceivers w/8 pin Screw-On MIC & Ext Spkr.
ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575,  IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, and other Icom transceivers with 8 pin, screw-on mics.  
Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751,

$14.50
CBL-IC8PD

ICOM  HF-, VHF, & UHF Transceivers with 8 pin DIN accessory jack
ICOM Models:  IC-721, IC-723, IC-725, IC-726, IC-728, IC-729, IC-732, IC-735, IC-736, IC-737, IC-737A, IC-738, IC-746, IC-756, IC-756PRO, IC-756PROII, IC-760, IC-761, IC-765, IC-775, IC-775DSP, IC-780, IC-781, IC-820, IC-821H, IC-910H, IC-970E, IC-970H, IC-2000 and other Icom transceivers with 8 pin DIN accessory I/O ports.

$14.50
CBL-IC13RY

ICOM  Transceivers with 13 pin DIN accessory jack w/ FSK pin
BEST CHOICE for Icom IC-706 mk II & IC-718;

$14.50
CBL-MDIN

Six pin mini DIN (VHF) jack for the706 and, transceivers with this I/O 
Most used for VHF operation with the 706 MK II, IC-207H and ICOMs with similar I/O

$14.50
CBL-IC45

ICOM HF, VHF, and UHF transceivers with RJ-45 Modular Mic jacks
ICOM models: IC-706, IC-207, IC-281, IC-381, IC-481, IC-681, IC-2100, 2350, 2340, and similar Icom I/O.  (Note: for 706 & 718, most ops prefer CBL IC13RY)

$14.50
CBL-IC4M

ICOM HF-VHF Transceivers with 4 pin screw-on mic & Ext Spkr
ICOM models IC-202, IC-215, IC-22S, IC-245, IC-280, IC-402, IC-502, etc...

$14.50
CBL-20

ICOM, handheld transceiver(s) with 2.5mm & 3.5mm jacks
Icom W32A, W32E, IC-T7A, T7E, IC-T8A, T8E, and Icom Hand Helds with similar I/O. NOTE: Be sure your Hand-Held uses the same connector format: 2.5mm (TxAFSK/PTT) and 3.5mm (Rx AF).

$14.50

CBL-CW

RASCAL to transceiver cable for hard-keyed CW operating $14.50
     
CLICK HERE for secure, OnLine ORDER FORM.
CLICK HERE for a "PDF format" Order form, to print and Mail or FAX,

KENWOOD

PART NUMBER DESCRIPTION, Make and Model of Transceiver PRICE Each
CBL-KW8M

KENWOOD Transceivers with 8 pin Screw-On mic & Ext Spkr I/O
KENWOOD models: TM-201, TM-221, TM-231, TM-241, TM-2530, TM-401, TM-421, TM-431, TM-441, TM-531, TM-541, TM-621, TM-631, TM-701, TM-721, TM-731, TR-3200, TR-50, TS-50/S, TS-60, TS-751, TS-851, TS-140, TS-430, TS-440, TS-450, TS-660, TS-670, TS-680, TS-690, TS-701, TS-711, TS-780, TS-790, TS-811, TS-850, TS-870, TS-930, TS-940, TS-950, TW-4000, 4100, and Kenwood transceivers with 8 pin screw-on Mic connectors

$14.50
CBL-KW13RY

Kenwood  Transceivers with 13 pin DIN accy  with FSK "pin."
For most Kenwood transceivers with 13 pin DIN with FSK pin.

$14.50
CBL-KW13RYR

Kenwood  Transceivers with 13 pin DIN accy with "FSK RCA Jack"
For most Kenwood transceivers with 13 pin DIN with FSK "RCA Jack".

$14.50
CBL-KW13-40

Early KENWOOD HF Transceivers with 13 pin DIN accessory jack
TS-940, 440... etc

$14.50
CBL-MDIN

KENWOOD Transceivers with 6 pin mini DIN (ISO standard) jack
(KENWOOD Models: TM-V7A,  TM-G 707A, and transceivers with similar I/O)

$14.50
CBL-K8MRYR

KENWOOD  8 pin screw-on mic & Ext Spkr I/O, and RCA FSK  jack
KENWOOD TS-930 and similar transceivers with 8 pin screw-on mic, 3.5mm Ext Spkr, and RCA "FSK" jack. for added FSK/RTTY operation

$14.50
CBL-THF6 KENWOOD HandHeld Transceivers with 3.5mm & 2.5mm "stereo" I/O
 
(KENWOOD Models: TH-F6A, TH-F7E and transceivers with similar I/O)
$14.50
CBL-KW45 KENWOOD HF and VHF Transceivers with (RJ45) MODULAR mic
TM-251, TM-2400, TM-255, TM-261, TM-451, TM-455, TM-461, TM-643, TM-732, TM-733, TM-741, TM-742, TM-833, TM-841, TM-842, TM-941, TM-942, and Kenwoods with RJ45 mic jacks
$14.50
CBL-KW4M KENWOOD HF Transceivers w/4 pin screw-on mic & Ext Spkr jack
TS-120, TS-130, TS-180, TS-311, TS-510, TS-511, TS-520, TS-530, TS-600, TS-700, TS-770, TS-801, TS-820, TS-830, TS-900, TX-310, TR-1300, TR-2200, TR-5200, TR-2300, TR-7010, TR-7200, TR-7400, TR-7500, TR-8000, TR-8200, TR-8300, and more)
$14.50
CBL-KW6M KENWOOD HF Transceivers with 6 pin screw-on mic & Ext Spkr jack
TR-7730, TR-7750, TR-7800, TR-7850, TR-7930, TR-7950, TR-8400, TR-9000, TR-9130, TR-9500, and other Kenwood transceivers with 6 pin screw-on mic connectors
$14.50

CBL-CW

RASCAL to transceiver cable for hard-keyed CW operating $14.50
     
CLICK HERE for secure, OnLine ORDER FORM.
CLICK HERE for a "PDF format" Order form, to print and Mail or FAX,

Radio Shack

PART NUMBER DESCRIPTION, Make and Model of Transceiver PRICE Each
CBL-HTX10 Radio Shack HTX-10 $14.50
CBL-HTX100 Radio Shack Model HTX-100 $14.50
CBL-HTX242 Radio Shack Model HTX-212, and HTX-242 $14.50
CBL-HTX252 Radio Shack HTX-252  $14.50
CBL-20  Radio Shack HTX-202 & HTX-404 $14.50
     
CLICK HERE for secure, OnLine ORDER FORM.
CLICK HERE for a "PDF format" Order form, to print and Mail or FAX,

RCI

PART NUMBER DESCRIPTION, Make and Model of Transceiver PRICE Each
CBL-RCI6 RCI 5054 and RCI radios with 6 pin screw-on MIC
This interface uses the 3.5mm external speaker jack for receive AF, and requires SwitchBox for SSTV.
$14.50
     
CLICK HERE for secure, OnLine ORDER FORM.
CLICK HERE for a "PDF format" Order form, to print and Mail or FAX,

SGC

PART NUMBER DESCRIPTION, Make and Model of Transceiver PRICE Each
CBL-2020 SGC model SG-2020
This interface does not use the 3.5mm external speaker jack.  This cable extracts receive audio from pin six of the SG-2020, 8 pin (screw-on) MIC jack.
$14.50
     
CLICK HERE for secure, OnLine ORDER FORM.
CLICK HERE for a "PDF format" Order form, to print and Mail or FAX,

Ten Tec

PART NUMBER DESCRIPTION, Make and Model of Transceiver PRICE Each
CBL-5PD Ten-Tec with 5 pin DIN data I/O accessory jack
Ten-Tec PEGASUS,  Jupiter, (538),  and radios with similar 5 pin DIN data I/O.
$14.50
CBL-OMNI For Ten-Tec transceivers with;  PTT,  Tx IN, Rx IN RCA jacks:
Ten-Tec OMNI V, & OMNI VI (Late Model Paragon, and Corsair) and transceivers with RCA jacks for ''Patch IN, Patch OUT, and PTT'' jacks.
$14.50
CBL-TT25 Ten-Tec transceivers with 1/4 inch Mic and Ext Spkr jacks:
Early Ten-Tec Triton 544,  Argonaut 505, 509, 515, (*early Omni V see late model; R-TTOMNI) below), and other Ten-Tec HF Transceivers with 1/4 inch Stereo Mic I/O and 1/4 inch mono external speaker jack.  NOTE: This interface cable works with other vintage transceivers; eg; Atlas, Swan,Drake, etc...
$14.50
CBL-TT4M Ten-Tec transceivers w/4 pin screw-on mic & 1/4" Ext Spkr I/O $14.50

CBL-CW

RASCAL to transceiver cable for hard-keyed CW operating $14.50
     
CLICK HERE for secure, OnLine ORDER FORM.
CLICK HERE for a "PDF format" Order form, to print and Mail or FAX

YAESU

PART NUMBER DESCRIPTION, Make and Model of Transceiver PRICE Each
CBL-Y8M YAESU transceivers with 8 pin (screw-on) mic input.
Receive audio be taken from the external speaker jack.   YAESU models: FT-1, FT-77, FT-102, FT-107, FT-211, FT-290 MKII, FT-480, FT-690 MKII, FT-707S, FT-712, FT-726, FT-736, FT-747, FT-757, FT-767, FT-790 MK II, FT-912, FT-980,  FT-2200, FT-5100, FT-7200, FT-840, FT-890, FT-ONE-S, and MORE,
$14.50
CBL-Y4M YAESU transceivers with 4 pin (screw-on) mic input
Receive audio is from the external speaker jack.   YAESU models: having 4 pin screw-on microphones.
$14.50
CBL-847HF  YAESU FT-847  3.5mm HF Data I/O HF jack
For Yaesu FT-847 "HF"  Data Jack (*NOTE: see CBL MDIN for 847 VHF operation
$14.50
CBL-MDIN YAESU transceivers having a, 6 pin Mini DIN for data I/O
YAESU  FT-817,  FT-100, FT-3000, FT-8000, FT-8100, . etc.. and  *FT-847 "VHF" port.
$14.50
CBL-YX YAESU transceivers with 4 circuit, 3.5mm I/O jack.
YAESU  FT-10, FT-40, FT-50, VX-1, VX-5, VX-150, and Yaesu handhelds with similar I/O.
$14.50
CBL-FT2500 YAESU FT-2500M 2400 & Yaesu transceivers with similar I/O
YAESU FT-2500, 2500M, 2400,  etc
$14.50
CBL-FT2600 YAESU FT-2600 & Yaesu transceivers with   DB9f   I/O
YAESU FT-2600, 2600M,  etc
$14.50
CBL-75767 YAESU transceivers using the rear panel RCA jacks;
YAESU FT-102, FT-757, FT-767, FT-920, etc
$14.50
CBL-5PD YAESU FT-1000"Mark V"  Transceiver PSK31 Interface  
Use also with YAESU FT-920 (insure that data mode switch is in AFSK position)
SPECIAL NOTE: Use the FT1000 MkV, "EASY SET" to configure 5 pin DIN, Packet jack, for USB. For FSK/RTTY operation, Use cable CBL FT4RY  (see below, FSK only!) 
$14.50
CBL-1000D YAESU FT-1000"D"  Transceiver PSK31 Interface
For FSK/RTTY operation, Use cable CBLFT4RY (see below, FSK only!)*
$14.50
CBL-1000MP YAESU FT-1000"MP"  Transceiver PSK31 Interface
For FSK/RTTY operation, Use cable MKVFTRY (see below, FSK only!)*
$14.50
CBL-FT4RY YAESU transceivers with 4 pin DIN RTTY jacks 
NOTE:  This cable enables FSK/RTTY operation only.
$14.50
CBL-20 YAESU  FT-51R & Yaesu handhelds with similar I/O
Yaesu handheld transceiver(s) using similar 2.5mm (TxAFSK/PTT)  and 3.5mm (Rx AF) "mono" I/O
$14.50

CBL-CW

RASCAL to transceiver cable for hard-keyed CW operating $14.50
     
CLICK HERE for secure, OnLine ORDER FORM.
CLICK HERE for a "PDF format" Order form, to print and Mail or FAX
 
     


A Primer for the new PSK31 user; CLICK HERE!


For Packet Radio to TNC interfaces, CLICK HERE


HAM Radio FREEWARE Software for Sound Card applications.


For RASCAL� Parts and components


Digital Operating Frequencies for the HAM Radio Operator



Shipping/Handling & warranty Return policy

 PacketRadio Networks Home Page.                 BUX Comm  ™® Antennas and Accessories Home Page.

TNX es 73 ...   Email  Buck,  K4ABT

ALL MATERIAL, TEXT AND GRAPHICS ON THESE PAGES ARE � COPYRIGHT of, and by, G. E. "Buck" ROGERS Sr, K4ABT.
ALL RIGHTS ARE RESERVED, 1986-2003   Reproduction in any form must have the written permission of the author.

Shipping/Handling & warranty Return policy

  * "RASCAL"   is   Registered trademark ®™ of BUX Communications Corp (BUX CommCo �)   *(RASCAL™® "Radio And Sound Card Adapter Link")


Hit Counter