Got more than one transceiver? Now you can operate the sound card modes without buying additional interfaces.  Simply change from your HF transceiver to the VHF/UHF transceiver by unplugging the HF cable and inserting a different transceiver cable. By using transformer isolation for the transmit and Receive audio paths, we prevent ground loop coupling, and reduce the chance of RF feedback into the PC sound card (squeals, hum, etc).  To further reduce RF feedback and RF ingress into the Tx or Rx sound card audio, we install a large (molded) ferrite core over the RASCAL to sound card audio I/O cable(s). The end result is clean, clear, audio, reproduction on-the-air. An added benefit of these preventive measures is the reduction of IMD. RASCAL��GLX, are in-stock, tested, and ready to ship!

 

	No external power supply required.
	No case screws to remove and replace when you want to change radios.
	No jumpers to juggle.
	Input/output is fully isolated using BuxComms isolation coupling transformers to prevent hum-loops and RF feedback.
	RFI, Noise and Distortion proof, using high quality, shielded audio cables with ferrite noise attenuators.
	High quality, silk screened, fiber glass, printed circuit board
	Compact size ABS case is color coordinated to match PC and related HAM gear.
	Easiest Setup of any sound card interface available, virtually Plug-N-Play.
	Supplied with PC comport (6 ft) cables, and RASCAL GLX, to radio cable is 6 ft. Overall length exceeds 10 feet.
	PC Cables, One set of RASCAL GLX, to Radio cables, Connectors, Components, and Complete documentation are included.
	Each RASCAL GLX, is fully tested before shipping.
	Added circuitry for hard-key'd CW for use with CBL CW cable and multimode software
	Added circuitry for use when using transceivers with true FSK (RTTY) output.
	Includes a CD ROM of PSK31 Software, Pictorial diagrams, & RASCAL GLX,Tech Support files. Sorry, we do not support soundcard program software.  For soundcard software & program support, contact the software vendor or author.
	Hardcopy Schematics, Documents, and Easy to follow Setup instructions.
	Clear lense covered "red" LED transmit indicator.
	RASCAL GLX,� is the ideal sound card interface for portable and field-day operations.
	Automatic PTT control is activated via the PC serial comport via software.
	To further reduce CPU noise, the serial comport  6 ft cable is high quality, with foil and drain wire shielding.
	An EZ access, transmit level control for transceiver transmit audio control.

 

ALINCO  We Accept   Mail order or FAX form CLICK HERE!
To view diagram, click the shopping cart for that model. CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  Price of a CBL is deducted from total for each RASCAL GLX purchased. →		Additional RASCAL to Radio CBLs are $12.95 Each Each $39.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).
CBL-AL8M	Alinco 8 pin screw-on mic & Ext Spkr I/O		Add To Cart
CBL-20	Alinco Hand-Helds with 2.5mm & 3.5mm I/O		Add To Cart
CBL-AL45	Alinco RJ45 I/O modular connector For ALINCO model: DR-605		Add To Cart
CBL-AL6A	Alinco 8 pin screw-on mic with receive at 3.5mm jack. For ALINCO models: DX-70, DR-119, DR-1200		Add To Cart
CBL-DJ25S	Alinco DJ-100T, 120T, 200T, & DJ-500		Add To Cart
CBL AL135	Alinco DR-135 DataRadio		Add To Cart
NOTICE:  Alternate method for FREE CBL. Enter the RASCAL GLX (engine) in the Shopping Cart, then use the "COMMENTS:" space in the Shopping Cart Check-Out form to enter the (free) CBL model number.  One (1) CBL FREE with each RASCAL GLX ordered.
AZDEN  We Accept   Mail order or FAX form CLICK HERE!
To view diagram, click the shopping cart for that model. CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  Price of a CBL is deducted from total for each RASCAL GLX purchased. →		Additional RASCAL to Radio CBLs are $12.95 Each Each $39.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).
CBL-MDIN	AZDEN 6 pin Mini DIN  for PCS 9000 Data Port		Add To Cart
COLLINS  We Accept   Mail order or FAX form CLICK HERE!
To view diagram, click the shopping cart for that model. CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  Price of a CBL is deducted from total for each RASCAL GLX purchased. →		Additional RASCAL to Radio CBLs are $12.95 Each Each $39.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).
CBL-75767	Transceivers with Patch IN, Patch OUT, and PTT RCA jacks		Add To Cart
CBL-CW	RASCAL to transceiver cable for hard-keyed CW operating		Add To Cart
DRAKE  We Accept   Mail order or FAX form CLICK HERE!
To view diagram, click the shopping cart for that model. CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  Price of a CBL is deducted from total for each RASCAL GLX purchased. →		Additional RASCAL to Radio CBLs are $12.95 EachEach RASCAL engine includes one FREE RASCAL to Radio cable (CBL).
CBL-TR7	DRAKE 4 pin screw-on mic with 1/8" Ext Spkr jack Models  TR-7 or TR-7/A, and some  TR-22, TR-33, TR-7, UV-3 radios		Add To Cart
CBL-TT25	DRAKE TR-4, TR-4C, TR-4CW, and TR-6 radios. Only  the standard 1/4 inch Stereo plugs are supplied!  SwitchCraft 230 (Collins) type 3-circuit MIC plug are NOT included. Similar interface to Drake "TWINS." (R4B & TX4B)		Add To Cart
CBL-CW	RASCAL to transceiver cable for hard-keyed CW operating		Add To Cart
ICOM  We Accept   Mail order or FAX form CLICK HERE!
To view diagram, click the shopping cart for that model. CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  Price of a CBL is deducted from total for each RASCAL GLX purchased. →		Additional RASCAL to Radio CBLs are $12.95 Each Each RASCAL engine includes one FREE RASCAL to Radio cable (CBL).
CBL-IC8M	ICOM HF, VHF,/UHF Transceivers w/8 pin Screw-On MIC & Ext Spkr jack. ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746,  756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics.  Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751,		Add To Cart
CBL-IC8PD	ICOM  HF-, Transceivers with 8 pin DIN accessory jack ICOM Models:  IC-275, IC-475, IC-721, IC-723, IC-725, IC-726, IC-728, IC-729, IC-732, IC-735, IC-736, IC-737, IC-737A, IC-738, IC-746, IC-746,<HF>IC746PRO, IC-756, IC-756PRO, IC-756PROII, IC-760/Pro, IC-761, IC-765, IC-775, IC-775DSP, IC-780, IC-781, IC-820, IC-821H, IC-910H, IC-970E, IC-970H, IC-1275,  IC-2000 and other Icom transceivers with 8 pin DIN accessory I/O ports.		Add To Cart
CBL 746V	This is a SPECIAL built cable for use with the Icom 746 & 756 series for use at VHF (NOT HF).  Note price of this CBL is 19.95		Add To Cart
CBL-IC13RY	ICOM  Transceivers with 13 pin DIN accessory jack w/ FSK pin. Wired for HF use.  BEST CHOICE for Icom IC-706 mk II & IC-718;		Add To Cart
CBL-IC13VU	ICOM  Transceivers with 13 pin DIN accessory jack wired for VHF/UHF operation For Icom IC-706 mk II and ICOM transceivers with similar I/O jack.		Add To Cart
CBL-MDIN	Six pin mini DIN (VHF) jack for the706 and, transceivers with this I/O  Most used for VHF operation with the 706 MK II, IC-207H and ICOMs with similar I/O		Add To Cart
CBL-IC45	ICOM HF, VHF, and UHF transceivers with RJ-45 Modular Mic jacks ICOM models: IC-207H, 2720, 2800, 703, IC-706, IC-718, IC-V8000, IC-281, IC-381, IC-481, IC-681, IC-2000, IC-2100, 2350, 2340, and similar Icom I/O.  (Note: for 706 & 718, most ops prefer CBL IC13RY)		Add To Cart
CBL-IC4M	ICOM HF-VHF Transceivers with 4 pin screw-on mic & Ext Spkr ICOM models IC-202, IC-215, IC-22S, IC-245, IC-280, IC-402, IC-502, etc...		Add To Cart
CBL-20	ICOM, handheld transceiver(s) with 2.5mm & 3.5mm jacks Icom W32A, W32E, IC-T7A, T7E, IC-T8A, T8E, and Icom Hand Helds with similar I/O. NOTE: Be sure your Hand-Held uses the same connector format: 2.5mm (TxAFSK/PTT) and 3.5mm (Rx AF).		Add To Cart
CBL-CW	RASCAL to transceiver cable for hard-keyed CW operating		Add To Cart
NOTICE:  Alternate method for FREE CBL. Enter the RASCAL GLX (engine) in the Shopping Cart, then use the "COMMENTS:" space in the Shopping Cart Check-Out form to enter the (free) CBL model number.  One (1) CBL FREE with each RASCAL GLX ordered.
CBL-QRP+	INDEX LABS "QRP+"		Add To Cart
KENWOOD  We Accept   Mail order or FAX form CLICK HERE!
To view diagram, click the shopping cart for that model. CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  Price of a CBL is deducted from total for each RASCAL GLX purchased. →		Additional RASCAL to Radio CBLs are $12.95 EachEach RASCAL engine includes one FREE RASCAL to Radio cable (CBL).
CBL-KW8M	KENWOOD Transceivers with 8 pin Screw-On mic & Ext Spkr I/O KENWOOD models: TM-201, TM-221, TM-231, TM-241, TM-2530, TM-401, TM-421, TM-431, TM-441, TM-531, TM-541, TM-621, TM-631, TM-701, TM-721, TM-731, TR-3200, TR-50, TS-50/S, TS-60, TS-751, TS-851, TS-140, TS-430, TS-440, TS-450, TS-660, TS-670, TS-680, TS-690, TS-701, TS-711, TS-780, TS-790, TS-811, TS-850, TS-870, TS-930, TS-940, TS-950, TW-4000, 4100, and Kenwood transceivers with 8 pin screw-on Mic connectors		Add To Cart
CBL-KW13RY	Kenwood  Transceivers with 13 pin DIN accy  with FSK "pin." For most Kenwood transceivers with 13 pin DIN with FSK pin, TS2000 etc.		Add To Cart
CBL-KW4013	Early KENWOOD HF Transceivers with 13 pin DIN accessory jack       TS-940, 440... etc		Add To Cart
CBL-MDIN	KENWOOD Transceivers with 6 pin mini DIN (ISO standard) jack (KENWOOD Models: TM-255, TM-455, TM-733, TM-833, TM-G707, TM-V7A,  TM-G 707A, (Delta) D-700 and transceivers with 6 pin mini DIN data I/O)		Add To Cart
CBL-THF6	KENWOOD HandHeld Transceivers with 3.5mm & 2.5mm "stereo" I/O   (KENWOOD Models: TH-F6A, TH-F7E and transceivers with similar I/O)		Add To Cart
CBL-KW45	KENWOOD HF and VHF Transceivers with (RJ45) MODULAR mic TM-251, TM-2400, TM-255, TM-261, TM-451, TM-455, TM-461, TM-643, TM-732, TM-733, TM-741, TM-742, TM-833, TM-841, TM-842, TM-941, TM-942, and Kenwoods with RJ45 mic jacks		Add To Cart
CBL-KW4M	KENWOOD HF Transceivers w/4 pin screw-on mic & Ext Spkr jack TS-120, TS-130, TS-180, TS-311, TS-510, TS-511, TS-520, TS-530, TS-600, TS-700, TS-770, TS-801, TS-820, TS-830, TS-900, TX-310, TR-1300, TR-2200, TR-5200, TR-2300, TR-7010, TR-7200, TR-7400, TR-7500, TR-8000, TR-8200, TR-8300, and more)		Add To Cart
CBL-KW6M	KENWOOD HF Transceivers with 6 pin screw-on mic & Ext Spkr jack TR-7730, TR-7750, TR-7800, TR-7850, TR-7930, TR-7950, TR-8400, TR-9000, TR-9130, TR-9500, and other Kenwood transceivers with 6 pin screw-on mic connectors		Add To Cart
CBL-CW	RASCAL to transceiver cable for hard-keyed CW operating		Add To Cart
Radio Shack  We Accept   Mail order or FAX form CLICK HERE!
To view diagram, click the shopping cart for that model. CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  Price of a CBL is deducted from total for each RASCAL GLX purchased. →		Additional RASCAL to Radio CBLs are $12.95 EachEach RASCAL engine includes one FREE RASCAL to Radio cable (CBL).
CBL-HTX10	Radio Shack HTX-10		Add To Cart
CBL-HTX100	Radio Shack Model HTX-100		Add To Cart
CBL-HTX242	Radio Shack Model HTX-212, and HTX-242  or RS 45		Add To Cart
CBL-HTX252	Radio Shack HTX-252		Add To Cart
CBL-20	Radio Shack HTX-202 & HTX-404		Add To Cart
NOTICE:  Alternate method for FREE CBL. Enter the RASCAL GLX (engine) in the Shopping Cart, then use the "COMMENTS:" space in the Shopping Cart Check-Out form to enter the (free) CBL model number.  One (1) CBL FREE with each RASCAL GLX ordered.
RCI  We Accept   Mail order or FAX form CLICK HERE!
To view diagram, click the shopping cart for that model. CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  Price of a CBL is deducted from total for each RASCAL GLX purchased. →		Additional RASCAL to Radio CBLs are $12.95 EachEach RASCAL engine includes one FREE RASCAL to Radio cable (CBL).
CBL-RCI6	RCI 5054 and RCI radios with 6 pin screw-on MIC This interface uses the 3.5mm external speaker jack for receive AF, and requires SwitchBox for SSTV.		Add To Cart
SBE 34  We Accept   Mail order or FAX form CLICK HERE!
To view diagram, click the shopping cart for that model. CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  Price of a CBL is deducted from total for each RASCAL GLX purchased. →		Additional RASCAL to Radio CBLs are $12.95 EachEach RASCAL engine includes one FREE RASCAL to Radio cable (CBL).
CBL-SBE34	SIDEBAND ENGINEERS model SBE 34 This interface provides open-end connection for the SBE34  external speaker screws..  Tx AF input and PTT is to the 1/4"  MIC jack.		Add To Cart
NOTICE:  Alternate method for FREE CBL. Enter the RASCAL GLX (engine) in the Shopping Cart, then use the "COMMENTS:" space in the Shopping Cart Check-Out form to enter the (free) CBL model number.  One (1) CBL FREE with each RASCAL GLX ordered.
SGC  We Accept   Mail order or FAX form CLICK HERE!
To view diagram, click the shopping cart for that model. CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  Price of a CBL is deducted from total for each RASCAL GLX purchased. →		Additional RASCAL to Radio CBLs are $12.95 EachEach RASCAL engine includes one FREE RASCAL to Radio cable (CBL).
CBL-2020	SGC model SG-2020 This interface uses the 3.5mm external speaker jack to extract receive audio.		Add To Cart
Ten Tec  We Accept   Mail order or FAX form CLICK HERE!
To view diagram, click the shopping cart for that model. CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  Price of a CBL is deducted from total for each RASCAL GLX purchased. →		Additional RASCAL to Radio CBLs are $12.95 EachEach RASCAL engine includes one FREE RASCAL to Radio cable (CBL).
CBL-5PD	Ten-Tec with 5 pin DIN data I/O accessory jack Ten-Tec PEGASUS,  Jupiter, (538),  and radios with similar 5 pin DIN data I/O.		Add To Cart
CBL-ORION	Ten-Tec ORION (565) Ten-Tec Orion transceivers with AUX I/O, 8 pin DIN jack.		Add To Cart
CBL-OMNI	For Ten-Tec transceivers with;  PTT,  Tx IN, Rx IN RCA jacks: Ten-Tec OMNI V, & OMNI VI (Late Model Paragon, and Corsair) and transceivers with RCA jacks for ''Patch IN, Patch OUT, and PTT'' jacks.		Add To Cart
CBL-TT25	Ten-Tec transceivers with 1/4 inch Mic and Ext Spkr jacks: Early Ten-Tec Triton 544,  Argonaut 505, 509, 515, (*early Omni V see late model; R-TTOMNI) below), and other Ten-Tec HF Transceivers with 1/4 inch Stereo Mic I/O and 1/4 inch mono external speaker jack.  NOTE: This interface cable works with other vintage transceivers; eg; Atlas, Swan,Drake, etc...		Add To Cart
CBL-TT4M	Ten-Tec transceivers w/4 pin screw-on mic & 1/4" Ext Spkr I/O		Add To Cart
CBL-CW	RASCAL to transceiver cable for hard-keyed CW operating		Add To Cart
UNIDEN and some President models  We Accept   Mail order or FAX form CLICK HERE!
To view diagram, click the shopping cart for that model. CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  Price of a CBL is deducted from total for each RASCAL GLX purchased. →		Additional RASCAL to Radio CBLs are $12.95 EachEach RASCAL engine includes one FREE RASCAL to Radio cable (CBL).
CBL-UNIDEN5MX	UNIDEN and some HR2510  with 5 pin Screw-On Mic and Ext Spkr jack.		Add To Cart
YAESU  We Accept   Mail order or FAX form CLICK HERE!
NOTICE:  Alternate method for FREE CBL. Enter the RASCAL GLX (engine) in the Shopping Cart, then use the "COMMENTS:" space in the Shopping Cart Check-Out form to enter the (free) CBL model number.  One (1) CBL FREE with each RASCAL GLX ordered.
To view diagram, click the shopping cart for that model. CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  Price of a CBL is deducted from total for each RASCAL GLX purchased. →		Additional RASCAL to Radio CBLs are $12.95 EachEach RASCAL engine includes one FREE RASCAL to Radio cable (CBL).
CBL-Y8M	YAESU transceivers with 8 pin (screw-on) mic input. Receive audio be taken from the external speaker jack.   YAESU models: FT-1, FT-77, FT-102, FT-107, FT-211, FT-290 MKII, FT-480, FT-690 MKII, FT-707S, FT-712, FT-726, FT-736, FT-747, FT-757, FT-767, FT-770, FT-840, FT-850, FT-790 MK II, FT-912, FT-980,  FT-990, FT-1000, FT-2200, FT-2700, FT-5100, FT-7200, FT-840, FT-890, FT-4700, FT-212, FT-ONE-S, FT-650, 707, 712, 726, 736, 756, 767, 77, 790II, 700, 840, 890, 990, 1000D  and MORE,		Add To Cart
CBL-MDIN	YAESU transceivers having a, 6 pin Mini DIN for data I/O YAESU  FT-817,  FT-100, FT-897, FT-1500, FT-3000, FT-8000, FT-8100, FT-8500, and FT-857   etc.. and   *FT-847 "VHF" port.		Add To Cart
CBL-Y4M	YAESU transceivers with 4 pin (screw-on) mic input Receive audio is from the external speaker jack.   YAESU models: having 4 pin screw-on microphones.		Add To Cart
CBL-847HF	YAESU FT-847  3.5mm HF Data I/O HF jack For Yaesu FT-847 "HF"  Data Jack (*NOTE: see CBL MDIN for 847 VHF operation		Add To Cart
CBL-FT600+	YAESU FT-736, FT-600, FT-890, & Late Model FT-900.  3.5mm HF Data I/O HF jack PTT  is via RCA "PTT" Jack.		Add To Cart
CBL-YX	YAESU hand-held transceivers with 4 circuit, 3.5mm I/O jack. YAESU  FT-10, FT-40, FT-50, VX-1, VX-5, VX-150, and Yaesu handhelds with similar I/O.		Add To Cart
CBL-FT2500	YAESU FT-2500M 2400 & Yaesu transceivers with similar I/O YAESU FT-2500, 2500M, 2400,  etc		Add To Cart
CBL-FT2600	YAESU FT-2600 & Yaesu transceivers with   DB9f   I/O YAESU FT-2600, 2600M,  etc		Add To Cart
CBL-FT2800	YAESU FT-2800 & Yaesu transceivers with   RJ 12 Mic & 3.5mm Ext Spkr  YAESU FT-2800, 2800M,  etc		Add To Cart
CBL-75767	YAESU transceivers using the rear panel RCA jacks; YAESU FT-102, FT-757, FT-767, FT-920, etc		Add To Cart
CBL-5PD	YAESU FT-1000"Mark V"  Transceiver PSK31 Interface   Use also with YAESU FT-920 (insure that data mode switch is in AFSK position) SPECIAL NOTE: Use the FT1000 MkV, "EASY SET" to configure 5 pin DIN, Packet jack, for USB. For FSK/RTTY operation, Use cable CBL FT4RY  (see below, FSK only!)		Add To Cart
CBL FT900/e	Early model YAESU FT-900 and Yaesu transceivers with similar I/0 For LATE model FT-900, see CBL F600 above. For FSK/RTTY operation, Use cable CBL FT4RY  (see below, FSK only!)		Add To Cart
CBL FT990	YAESU FT-990 and Yaesu transceivers with similar I/0 For FSK/RTTY operation, Use cable CBL FT4RY  (see below, FSK only!)		Add To Cart
CBL-1000D	YAESU FT-1000"D"  Transceiver PSK31 Interface cable For FSK/RTTY operation, Use cable CBLFT4RY (see below, FSK only!)*		Add To Cart
CBL-1000MP	YAESU FT-1000"MP"  Transceiver PSK31 Interface cable For FSK/RTTY operation, Use cable MKVFTRY (see below, FSK only!)*		Add To Cart
CBL-FT4RY	YAESU transceivers with 4 pin DIN RTTY jacks  NOTE:  This cable enables FSK/RTTY operation only.		Add To Cart
CBL-20	YAESU  FT-51R & Yaesu handhelds with similar I/O Yaesu handheld transceiver(s) using similar 2.5mm (TxAFSK/PTT)  and 3.5mm (Rx AF) "mono" I/O		Add To Cart
CBL-CW	RASCAL to transceiver cable for hard-keyed CW operating		Add To Cart
NOTICE:  Alternate method for FREE CBL. Enter the RASCAL GLX (engine) in the Shopping Cart, then use the "COMMENTS:" space in the Shopping Cart Check-Out form to enter the (free) CBL model number.  One (1) CBL FREE with each RASCAL GLX ordered.
If you would like instructions explaining how to setup the RASCAL and EchoLink to an Icom 706 and similar HF/VHF radios, send us an Email with your return Email address. We'll send the (pdf) file, return eMail CLICK HERE!
We Accept   Mail order or FAX form CLICK HERE!
USB to SERIAL Adapter  OK, so you have a new PC with only a USB port, and no serial port....  Not so, any more.  BUX Comm has the answer.  This USB to Serial comport converter meets the specs shown below, and enables  you to operate the RASCAL� interface(s) from a PC USB port.  Also enables the use of TNC I/O and other serial comport devices. USB  V1.1 Compliant Supports Windows� 98/2000/ME and CLICK HERE to Download XP drivers Installation driver CD (included) installs serial port instantly Supports baud rates from 1,200 to 115,200 K Great addition for the new LapTop that came without a serial comport. Drives the BUX Comm RASCAL"� for Auto-PTT in PSK31. etc. USB2SC  $19.95 Add To Cart  We Accept   Mail order or FAX form CLICK HERE!
RASCAL TO PC EXTENDER KIT This cable kit allows you to space your PC and transceiver more than 15 feet apart.  This kit contains: One (1) db9 female, to db9 male cable 6 feet, serial comport cable,  and Two (2) 3.5mm stereo female to male, sound card cables. Combined with the 6 ft RASCAL to transceiver cables, and 6 ft, RASCAL GLX to PC cables, you can separate the radio and PC more than 15 feet. $3.99 Order Model  RXK Add To Cart
Make your own CBL, using this ready made cable.  The 5DMX cable is 6 feet long, the 5 pin (male) DIN and  3.5mm external speaker plug are already attached and wired to the 5 pin DIN.  All you add is the mating connector for the transceiver/radio end of the cable.  The cable is already prepped with 1/2 inch of each wire exposed, and 1/8 inch bare wire stripped, and solder tinned for easy attaching to your radio mating plug.          $5.99 each,  Order model 5DMX Add To Cart
SIX (6) foot shielded cable with all 8 wires attached to the 8 pin screw-on microphone connector. Got a new "super-mic", or need to interface another device to the mic jack.... here's the solution.       $4.99 each,   Order Model  8M Add To Cart
13 pin DIN male plug wired with 6 ft (straight) cable.  All 13 pins are connected, wires are color coded, and include one drain/shield wire.  For use with KENWOOD, ICOM, and radios with 13 pin DIN jacks.    $5.99 ea. ORDER No. 13D Add To Cart
Stereo "Y" connector, also works great with MONO applications. Sometimes referred to as the soundcard "Y" splitter. Order,  YCONN 99 cents each Add To Cart		Sound card six ft male to female stereo extender cables (1/8") or 3.5mm stereo male, to 3.5mm stereo female, shielded extension cable.  These are  6 ft, high-quality, stereo cables.  Great for sound card stereo extensions to RASCAL Line IN and Line OUT or MIC IN/SPKR OUT jacks. Order 35MFSTX $1.49 each Add To Cart Order 2 for sound card applications.
This switcher enables you to leave your RASCAL GLX connected to the PC, and the CBLs connected to a separate transceiver accessory jacks.  Switch between your VHF or HF transceiver with just the flip of the  switch.  No cable swapping when you have the SW5 in line.  In addition, you can use this box to switch between the serial comports of your PC, or if you have only one serial comport, use the SX5 to switch between the RASCAL and another serial I/O device.  The SX5 is so versitle, it can be used as a monitor switchbox via the 15 pin I/O ports.  INCLUDES 1 RASCAL TO SW5 CABLE. Front   Back SO.., you need a 4 hole'r...                  No problem, BUX COMM has the solution !    You can use this box to switch between four serial comports of your PC(s), or if you have only one serial comport, use the SW5 to switch between the RASCAL and other serial I/O devices.  The SW5 is so versatile, it can be used as a monitor switchbox via the 15 pin PC monitor I/O ports.  INCLUDES 1, RASCAL GLX TO SW5 CABLE.    Switch positions are labeled "A,  B,  C,  &  D,"   Space is provided for you to label switch positions as you wish. Reg 44.95               Order SW5,   $ 24.95 each  Add To Cart
RASCAL GLKit is the same as the RASCAL GLX, but in kit form.  We've had many requests for a kit version of the RASCAL GLX.  This RASCAL GLK (kit) has all the features of the RASCAL GLX, and is easily assembled and setup.  It's a FUN evening project you'll enjoy.  An experienced Amateur can have it on the air in less than an hour.   All parts, components, black case, cables, connectors, and detailed, step-by-step instructions, are included in the kit.  Choose one CBL (FREE) from the interface cable listing above.  Be sure you specify "CBL" number on order form with the RASCAL GLKIT !  Additional interface cables (CBL) are available at $12.95 each. RASCAL "KIT" 1 CBL is FREE   $29.95.   GLKIT  CLICK HERE for the RASCAL GLKit Page,
Our Lil Lite that we include with each RASCAL GLX. Additional lil lites are available at 99 cents each.  Batteries are included.  Perfect solution for finding the correct comport, or accessory jack on the dark sides of your PC or back of your transceiver.   Also doubles as a sturdy "key-ring."   99 cents each   LILITE  Add To Cart

Sorry, due to recent specific shipping regulations, we can no longer ship to most south America, Mexico, and Indonesian address(s).   Customs legislation stipulates that in all cases the addressee must be present to authorize the opening, checking, and customs clearance of packages.  In many cases, a large number of losses that were unrecoverable, has prompted this action.

THE NEW 2004 Amateur Radio CD ROM: is HERE;  NOW BIGGER THAN EVER!  More than 350 Megabytes of Packet Radio, PSK31-SSTV-RTTY-MFSK-PACKET, and hundreds more  interface diagrams, drawings, illustrations, tutorials, and MORE! CLICK HERE for more INFO about the Amateur Radio Operator's CD ROM for 2004. This CD contains MegaBytes of HAM Radio related articles, diagrams, illustrations, and drawings. Diagrams from 12 years of my Packet Users Notebook in CQ Magazine are included on this CD.   For Windows 95, 98, and WINNT This CD contains full versions of WinPSK and other 'freeware' programs for use with PSK31, Packet, SSTV, RTTY and more.    
$9.95   ORDER  2004CD   Add To Cart
This CD is included FREE with purchase of the Wired & Tested or Kit, RASCAL GLX & GLKit.

Digital Operating Frequencies for the HAM Radio Operator