EVINGTON, VA 24550 FAX 434 525 7818
"Home of the RASCAL" (OnLine) SHOPPING 24 / 7
EVINGTON, VA 24550 FAX 434 525 7818
Radio And Sound Card Adapter Link�� "GLX"
Pages on this site are equipped with "Shopping Cart" and is VeriSign certified, SECURE, On-Line shopping! Cookies are the way the Shopping-Cart knows who you are after you�ve started adding items to your cart. Without cookies enabled in your internet browser, when shopping several pages, the Shopping-Cart will not remember all the items you've added. To have a pleasant and trouble free experience shopping this or any other web site (shopping-cart) it�s important that you have cookies enabled.
BUX
White Knight
and BUX Black Beauty.
Included with the RASCAL GLX
is our 2004 CD ROM
with over 400 MB of HAM Radio software and information.
CLICK HERE and read what our customers say about the
RASCAL GLX.
|
|
0:00
AM to 4:00 PM
(Eastern time, Monday thru Friday, Except HOLIDAYS.) Orders Only ! 434 - 534 - 8873 Orders Only ! ALL ORDERS SHIPPED SAME DAY RECEIVED, except sunday and holidays. |
|
When placing phone orders, have list
of model numbers,
descriptions, and credit card,
(VISA, Discover, or
MasterCard)
information ready.
(Helps us ship your order same
day)
Please be sure to use correct "Ship-To" Address, ZIPcode, Callsign, and
Phone number* (*
UPS required). ALL INFORMATION IS KEPT COMPLETELY CONFIDENTIAL, AND NO MAILING LISTS ARE SOLD, CONVEYED, OR OTHERWISE TRANSMITTED ! |
Interface cables "CBL" listed by radio make & model. CLICK
for specific radio section.
| ALINCO-ADI |
|
AZDEN |
|
COLLINS |
|
| DRAKE |
|
ICOM |
|
KENWOOD |
|
| KDK |
|
MIDLAND |
|
Radio Shack |
|
| RCI |
|
SBE |
|
SGC |
|
| TenTec |
|
UNIDEN |
|
YAESU |
|
| CABLES and ACCESSORIES |
|
||||
Remember how dark it is behind your transceiver...and how difficult it is to find the I/O jack on the rear panel of your transceiver? That's no longer a problem. We provide a FREE Flash-Lite with each RASCAL to help you find the accessory jack on the dark-side of your radio. With the Rascal GLX, The Total cable length between transceiver and PC exceed 10 feet. As with most Sound Card software, be sure your PC is equipped with a Creative Labs or SB16 compatible sound card, to provide the features and support for; PSK31, SSTV, EchoLink, Packet, RTTY (FSK & AFSK), eQSO, WJST, APRS, CW, MT63, and more. Got more than one transceiver? Now you can operate the sound card modes without buying additional interfaces. Simply change from your HF transceiver to the VHF/UHF transceiver by unplugging the HF cable and inserting a different transceiver cable. By using transformer isolation for the transmit and Receive audio paths, we prevent ground loop coupling, and reduce the chance of RF feedback into the PC sound card (squeals, hum, etc). To further reduce RF feedback and RF ingress into the Tx or Rx sound card audio, we install a large (molded) ferrite core over the RASCAL to sound card audio I/O cable(s). The end result is clean, clear, audio, reproduction on-the-air. An added benefit of these preventive measures is IMD reduction. RASCAL��GLX, are in-stock, tested, and ready to ship, same day order is received !
 |
No external power supply required. |
|
No case screws to remove and replace when you want to change radios. |
|
No jumpers to juggle. |
|
Input/output is fully isolated using BuxComms isolation coupling transformers to prevent hum-loops and RF feedback. |
|
RFI, Noise and Distortion proof, using high quality, shielded audio cables with ferrite noise attenuators. |
|
High quality, silk screened, fiber glass, printed circuit board |
|
Compact size ABS case is color coordinated to match PC and related HAM gear; Choice; Black, or PC white. |
|
Easiest Setup of any sound card interface available, virtually Plug-N-Play. |
|
Supplied with PC comport (6 ft) cables, and
RASCAL
GLX,
to radio cable
is 6 ft. Overall length exceeds 11 feet. |
|
PC Cables, One set of RASCAL GLX, to Radio cables, Connectors, and Complete documentation are included. |
|
Each RASCAL GLX, is fully tested before shipping. |
|
Added circuitry for hard-key'd CW for use with CBL CW cable and multimode software |
|
Added circuitry for use when using transceivers with true FSK (RTTY) output. |
|
Includes a
CD ROM of PSK31 Software, Pictorial diagrams, SoundCard Programs
&
RASCAL
GLX,Tech
Support files.
|
|
Hardcopy Schematics, Documents, and Easy to follow Setup instructions. |
|
Clear lense covered "red" LED transmit indicator. |
|
RASCAL GLX,� is the ideal sound card interface for portable and field-day operations. |
|
Automatic PTT control is activated via the PC serial comport via software. |
|
To further reduce CPU noise, the serial comport 6 ft cable is high quality, with foil and drain wire shielding. |
|
An EZ access, transmit level control for transceiver transmit audio control. |
IMPORTANT NOTE:
This kit contains:
One (1) db9 female, to db9 male cable 6 feet, serial comport
cable,
Two (2) 3.5mm stereo female to male, 6 feet, sound card cables.
One FREE Cable (CBL) with each Wired & Tested RASCAL GLX. The free cable(s) (CBL) you select should NOT be 'ADDED to the Shopping Cart. Instead, Enter the free CBL model in the ''CBL Model'' space, on the Secure Checkout form (when you Check out). A space is provided on the Checkout form for 'CBL Model' entry. NOTE:
CBL MDIN is our most popular cable (CBL). Most late model transceivers are now equipped with this 6 pin Mini DIN, ISO 9002 standard data input/output jack, including, Alinco, Icom, Kenwood, Azden, Radio Shack, and YAESU. If your radio has the 6 pin Mini DIN, Data I/O jack, then by all means use it. Using this jack, enables the use of your microphone, while operating SSTV, etc... Order as many extra cables (CBL) with the Shopping Cart as you wish, but keep in mind that one CBL is free with each RASCAL GLX, GLB, or GLK you order. The free cable(s) (CBL) you select should not be 'ADDED to the Shopping Cart, instead, the free CBL should be entered in the CBL Model space on the Secure Checkout form. A space is provided on the Secure Checkout form for both 'COMMENTS' and 'CBL Model'.
ALINCO We Accept
Mail or FAX form CLICK HERE!
CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver
←One CBL FREE with each RASCAL GLX. →
Additional RASCAL to Radio CBLs are $14.95 Each.
CBL Number Description (Transceiver model)
Radio Jack/Port
YES, we sell to dealers, call for info! CBL-AK8M DX-77T, DX-70TH, DR-110T, DR-130T, DR-410T, DR-510T, DR.112T, DR-570T, DR-590, DR-592, DR-599, DR-600, DR-430T, DR135T/EMKII, DR-235T/TG, DR-435T/TG, DR-620T, DR-M06TH, DR-M03SX, ALR-22T, ALR-22HT, ALR-72T, ALD-24T,
CBL-DJ25S DJ-120, DJ-160/460, DJ-100, DJ-120 DJ-200 DJ-500, DJ-C1T, C4T, C5T,
CBL-20 Alinco Hand-Helds with 2.5mm & 3.5mm I/O
DJ180/480, DJ-196(DJ-195/296/496, DJ-F1/F4, DJ-S1/S4, DJ-160, DJ-460, DJ-162, DJ-560, ALM-203T, ALR-206, DJ-180T, DJ-280T, DJ-480T, DJ-580T, DJ-191T,
CBL-AL45 DR-140, DR-605,
CBL-AL6A Alinco 8 pin screw-on mic with receive at pin 6 of Mic I/O.
For ALINCO models: DX-77, DR-119, DR-1200
CBL AL135 Alinco DR-135 DataRadio
CBL MDIN BUX NOTICE: Throughout our web pages, you'll see references to the 6 pin Mini DIN. This is the latest attempt by the ISO 9002 committee, to establish a "standard" for 1200 and 9600 baud I/O with PTT. If your radio has this jack as an I/O, this is the port to use for the digital modes, as it enables leaving your microphone connected. If your transceiver supports this 6 pin Mini DIN I/O, then consider using our cable model, "CBL MDIN" with the RASCAL GLX. By using this jack you've enabled simultaneous use of the digital modes and voice operation. (some transceivers require "menu selection" to activate this I/O).
NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered. Additional CBLs may be ordered via the SHOPPING CART @ $14.95 each.
AZDEN
We Accept
CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver
←One CBL FREE with each RASCAL GLX. →
RASCAL to Radio CBLs are $14.95 Each.
CBL-MDIN AZDEN 6 pin Mini DIN for PCS 9000 Data Port
CBL AZMX
AZDEN transceivers with 8 pin screw-on mic and 3.5mm Ext Spkr plug
COLLINS
To view diagram, click the shopping cart for that model.
CBL Model No. ↓DESCRIPTION, Make and Model of Transceiver
←One CBL FREE with each RASCAL GLX. →
Additional RASCAL to Radio CBLs are $14.95 Each.
Transceivers with Patch IN, Patch OUT, and PTT RCA jacks
RASCAL to transceiver cable for hard-keyed CW operating CBL-CW is supplied with 3.5 and 1/4" plugs to CW jacks
DRAKE
CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver
←One CBL FREE with each RASCAL GLX. →
Additional RASCAL to Radio CBLs are $14.95 Each.
CBL-TR7 DRAKE 4 pin screw-on mic with 3.5mm (1/8") Ext Spkr jack
Models TR-7 or TR-7/A, and some TR-22, TR-33, TR-7, UV-3 radios
CBL-TT25 DRAKE TR-4, TR-4C, TR-4CW, and TR-6 radios. Only the standard 1/4 inch Stereo plugs are supplied! SwitchCraft 230 (Collins) type 3-circuit MIC plug are NOT included. Similar interface to Drake "TWINS." (R4B & TX4B)
RASCAL to transceiver cable for hard-keyed CW operating CBL-CW is supplied with 3.5 and 1/4" plugs to CW jacks
ICOM
CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver
←One CBL FREE with each RASCAL GLX. →
Additional RASCAL to Radio CBLs are $14.95 Each.
Each $39.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).CBL-IC8M ICOM HF, VHF,/UHF Transceivers w/8 pin Screw-On MIC & Ext Spkr jack. ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746, 756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics. Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751,
CBL-IC8PD ICOM HF-, Transceivers with 8 pin DIN accessory jack
ICOM Models: IC-275, IC-475, IC-721, IC-723, IC-725, IC-726, IC-728, IC-729, IC-732, IC-735, IC-736, IC-737, IC-737A, IC-738, IC-746, IC-746,<HF>IC746PRO, IC-756, IC-756PRO, IC-756PROII, IC-760/Pro, IC-761, IC-765, IC-775, IC-775DSP, IC-780, IC-781, IC-820, IC-821H, IC-910H, IC-970E, IC-970H, IC-1275, IC-2000 and other Icom transceivers with 8 pin DIN accessory I/O ports. AND MORE !CBL 746V This RASCAL GLX to Transceiver uses both the 8 pin DIN and 7 pin DIN, of the 746 & 756 PRO series.
This is a SPECIAL built cable for use with the Icom 746 & 756 series for use at VHF (NOT HF). Note price of this CBL is 19.95
CBL-IC13RY ICOM Transceivers with 13 pin DIN accessory jack w/ FSK pin. Wired for HF use. BEST CHOICE for Icom IC-706 mk II & IC-718;
CBL-IC13VU ICOM Transceivers with 13 pin DIN accessory jack wired for VHF/UHF operation For Icom IC-706 mk II and ICOM transceivers with similar I/O jack.
CBL-MDIN Six pin mini DIN (VHF) jack for the706 and, transceivers with this I/O Most used for VHF operation with the 706 MK II, IC-207H and ICOMs with similar I/O
CBL-IC45 ICOM HF, VHF, and UHF transceivers with RJ-45 Modular Mic jacks ICOM models: IC-207H, 2720, 2800, 703, IC-706, IC-718, IC-V8000, IC-281, IC-381, IC-481, IC-681, IC-2000, IC-2100, 2350, 2340, and similar Icom I/O. (Note: for 706 & 718, most ops prefer CBL IC13RY)
CBL-IC4M ICOM HF-VHF Transceivers with 4 pin screw-on mic & Ext Spkr
ICOM models IC-202, IC-215, IC-22S, IC-245, IC-280, IC-402, IC-502, etc...
CBL-20 ICOM, handheld transceiver(s) with 2.5mm & 3.5mm jacks
Icom W32A, W32E, IC-T7A, T7E, IC-T8A, T8E, and Icom Hand Helds with similar I/O. NOTE: Be sure your Hand-Held uses the same connector format: 2.5mm (TxAFSK/PTT) and 3.5mm (Rx AF).RASCAL to transceiver cable for hard-keyed CW operating CBL-CW is supplied with 3.5 and 1/4" plugs to CW jacks CLICK HERE> Solutions and Cures for Sound Card Hum Problems NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered. Additional CBLs may be ordered via the SHOPPING CART @ $14.95 each.
CBL-QRP+ INDEX LABS "QRP+" KENWOOD
CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver
←One CBL FREE with each RASCAL GLX. →
Additional RASCAL to Radio CBLs are $14.95 Each.
CBL-KW8M KENWOOD Transceivers with 8 pin Screw-On mic & Ext Spkr I/O
KENWOOD models: TM-201, TM-221, TM-231, TM-241, TM-2530, TM-401, TM-421, TM-431, TM-441, TM-531, TM-541, TM-621, TM-631, TM-701, TM-721, TM-731, TR-3200, TR-50, TS-50/S, TS-60, TS-751, TS-851, TS-140, TS-430, TS-440, TS-450, TS-660, TS-670, TS-680, TS-690, TS-701, TS-711, TS-780, TS-790, TS-811, TS-850, TS-870, TS-930, TS-940, TS-950, TW-4000, 4100, and Kenwood transceivers with 8 pin screw-on Mic connectors
CBL-KW13RY Kenwood Transceivers with 13 pin DIN accy jack. w/ FSK "pin."
Kenwood transceivers with 13 pin DIN Accessory Jacks see TS850, 940 & 440 belowCBL-KW13RYR Kenwood TS-850 and KW Transceivers with 13 pin DIN accy and "FSK RCA Jack" For TS-850 Kenwood transceivers with 13 pin DIN and RTTY/FSK "RCA Jack".
CBL-KW4013 Early KENWOOD HF Transceivers with 13 pin DIN accessory jack TS-940, 440..
CBL-MDIN KENWOOD Transceivers with 6 pin mini DIN (ISO standard) jack
(KENWOOD Models: TM-255, TM-455, TM-733, TM-833, TM-G707, TM-V7A, TM-G 707A, (Delta) D-700, 480hx, and transceivers with 6 pin mini DIN data I/O)CBL-THF6 KENWOOD HandHeld Transceivers with 3.5mm & 2.5mm "stereo" I/O
(KENWOOD Models: TH-F6A, TH-F7E and transceivers with similar I/O)
CBL-026 KENWOOD TR-2600 HandHeld Transceivers with 3.5mm & 2.5mm
(KENWOOD Models: TR-2600 and transceivers with similar I/O)CBL-KW45 KENWOOD HF and VHF Transceivers with (RJ45) MODULAR mic
TM-251, TM-2400, TM-255, TM-261, TM-451, TM-455, TM-461, TM-643, TM-732, TM-733, TM-741, TM-742, TM-833, TM-841, TM-842, TM-941, TM-942, and Kenwoods with RJ45 mic jacks
CBL-KW4M KENWOOD HF Transceivers w/4 pin screw-on mic & Ext Spkr jack
TS-120, TS-130, TS-180, TS-311, TS-510, TS-511, TS-520, TS-530, TS-600, TS-700, TS-770, TS-801, TS-820, TS-830, TS-900, TX-310, TR-1300, TR-2200, TR-5200, TR-2300, TR-7010, TR-7200, TR-7400, TR-7500, TR-8000, TR-8200, TR-8300, and more)
CBL-KW6M KENWOOD HF Transceivers with 6 pin screw-on mic & Ext Spkr jack
TR-7730, TR-7750, TR-7800, TR-7850, TR-7930, TR-7950, TR-8400, TR-9000, TR-9130, TR-9500, and other Kenwood transceivers with 6 pin screw-on mic connectors
RASCAL to transceiver cable for hard-keyed CW operating CBL-CW is supplied with 3.5 and 1/4" plugs to CW jacks NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered. Additional CBLs may be ordered via the SHOPPING CART @ $14.95 each.
KDK
CBL-KDK4MX KDK Transceivers w/4 pin screw-on mic & Ext Spkr jack
MIDLAND
CBL-MID4MX Midland Transceivers w/4 pin screw-on mic & Ext Spkr jack
BACK TO TOP If you don't see a cable (CBL) model for your transceiver, let us know, and we'll try to make it.
Radio Shack
CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver
←One CBL FREE with each RASCAL GLX. →
Additional RASCAL to Radio CBLs are $14.95 Each.
Each $39.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).CBL-HTX10 Radio Shack HTX-10
CBL-HTX100 Radio Shack Model HTX-100
CBL-HTX242 Radio Shack Model HTX-212, and HTX-242 or RS 45
CBL-HTX252 Radio Shack HTX-252
CBL-20 Radio Shack HTX-202 & HTX-404
NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered. Additional CBLs may be ordered via the SHOPPING CART @ $14.95 each.
RCI
CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver
←One CBL FREE with each RASCAL GLX. →
Additional RASCAL to Radio CBLs are $14.95 Each.
Each $39.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).CBL-RCI6 RCI 5054 and RCI radios with 6 pin screw-on MIC
This interface uses the 3.5mm external speaker jack for receive AF, and requires SwitchBox for SSTV.
SBE 34
CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver
Additional RASCAL to Radio CBLs are $14.95 Each.
CBL-SBE34 SIDEBAND ENGINEERS model SBE 34
This interface provides open-end connection for the SBE34 external speaker screws.. Tx AF input and PTT is to the 1/4" MIC jack.
NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered. Additional CBLs may be ordered via the SHOPPING CART @ $14.95 each.
SGC
CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver
AdditionalRASCAL to Radio CBLs are $14.95 Each.
CBL-2020 SGC model SG-2020
This interface uses the 3.5mm external speaker jack to extract receive audio.
Ten Tec
CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver
Additional RASCAL to Radio CBLs are $14.95 Each.
CBL-5PD Ten-Tec with 5 pin DIN data I/O accessory jack
Ten-Tec PEGASUS, Jupiter, (538), and radios with similar 5 pin DIN data I/O. 5 pin (standard) DIN to 5 pin DIN.
CBL-ORION Ten-Tec ORION (565)
Ten-Tec Orion transceivers with AUX I/O, 8 pin DIN jack.
CBL-OMNI For Ten-Tec transceivers with; PTT, Tx IN, Rx IN RCA jacks: Ten-Tec OMNI V, & OMNI VI (Late Model Paragon, and Corsair) and transceivers with RCA jacks for ''Patch IN, Patch OUT, and PTT'' jacks.
CBL-TT25 Ten-Tec transceivers with 1/4 inch Mic and Ext Spkr jacks:
Early Ten-Tec Triton 544, Argonaut 505, 509, 515, (*early Omni V see late model; R-TTOMNI) below), and other Ten-Tec HF Transceivers with 1/4 inch Stereo Mic I/O and 1/4 inch mono external speaker jack. NOTE: This interface cable works with other vintage transceivers; eg; Atlas, Swan,Drake, etc...
CBL-TT4M Ten-Tec transceivers w/4 pin screw-on mic & 1/4" Ext Spkr I/O
with 1/4" Ext Spkr plugRASCAL to transceiver cable for hard-keyed CW operating CBL-CW is supplied with 3.5 and 1/4" plugs to CW jacks CLICK HERE>
Solutions and Cures for Sound Card Hum ProblemsUNIDEN
CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver
←One CBL FREE with each RASCAL GLX. →
Additional RASCAL to Radio CBLs are $14.95 Each.
Each $39.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).CBL-UNIDEN5MX UNIDEN and some HR2510 with 5 pin Screw-On Mic and Ext Spkr jack.
NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered. Additional CBLs may be ordered via the SHOPPING CART @ $14.95 each.
YAESU
CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver
←One CBL FREE with each RASCAL GLX. →
Additional RASCAL to Radio CBLs are $14.95 Each.
Each $39.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).CBL-Y8M YAESU transceivers with 8 pin (screw-on) mic input.
Receive audio be taken from the external speaker jack. YAESU models: FT-1, FT-77, FT-102, FT-107, FT-211, FT-290 MKII, FT-480, FT-690 MKII, FT-707S, FT-712, FT-726, FT-736, FT-747, FT-757, FT-767, FT-770, FT-840, FT-850, FT-790 MK II, FT-912, FT-980, FT-990, FT-1000, FT-2200, FT-2700, FT-5100, FT-7200, FT-840, FT-890, FT-4700, FT-212, FT-ONE-S, FT-650, 707, 712, 726, 736, 756, 767, 77, 790II, 700, 840, 890, 990, 1000D and MORE,
CBL-Y4M YAESU transceivers with 4 pin (screw-on) mic input
Receive audio is from the external speaker jack. YAESU models: having 4 pin screw-on microphones.
CBL-MDIN YAESU transceivers having a, 6 pin Mini DIN for data I/O YAESU FT-817, FT-100, FT-897, FT-1500, FT-3000, FT-8000, FT-8100, FT-8500, and FT-857 etc.. and *FT-847 "VHF" port.
CBL-847HF YAESU FT-847 3.5mm HF Data I/O HF jack
For Yaesu FT-847 "HF" Data Jack (*NOTE: see CBL MDIN for 847 VHF operation
CBL-FT600+ YAESU FT-736, FT-600, FT-890, & Late Model FT-900. 3.5mm HF Data I/O HF jack
PTT is via RCA "PTT" Jack.
CBL-YX YAESU hand-held transceivers with 4 circuit, 3.5mm I/O jack. YAESU FT-10, FT-40, FT-50, VX-1, VX-5, VX-150, and Yaesu handhelds with similar I/O.
CBL-FT2500 YAESU FT-2500M 2400 & Yaesu transceivers with similar I/O YAESU FT-2500, 2500M, 2400, etc
CBL-FT2600 YAESU FT-2600 & Yaesu transceivers with DB9f I/O
YAESU FT-2600, 2600M, etc
CBL-FT2800 YAESU FT-2800 & Yaesu transceivers with RJ 12 Mic & 3.5mm Ext Spkr YAESU FT-2800, 2800M, etc
CBL-75767 YAESU transceivers using the rear panel RCA jacks;
YAESU FT-102, FT-757, FT-767, FT-920, etc
CBL-5PD YAESU FT-1000"Mark V" Transceiver PSK31 Interface Use also with YAESU FT-920 (insure that data mode switch is in AFSK position) SPECIAL NOTE: Use the FT1000 MkV, "EASY SET" to configure 5 pin DIN, Packet jack, for USB. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)
CBL FT900/e Early model YAESU FT-900 and Yaesu transceivers with similar I/0 For LATE model FT-900, see CBL F600 above. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)
CBL FT990 YAESU FT-990 and Yaesu transceivers with similar I/0
For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)
CBL-1000D YAESU FT-1000"D" Transceiver PSK31 Interface cable "NOTE" Receive AF is at "RING" of 3.5mm plug. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)*
CBL-1000MP YAESU FT-1000"MP" Transceiver PSK31 Interface cable "NOTE" Receive AF is at "TIP" of 3.5mm plug.
For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)*
CBL-FT4RY YAESU transceivers with 4 pin DIN RTTY jacks
NOTE: This cable enables FSK/RTTY operation only.
CBL-20 YAESU FT-51R & Yaesu handhelds with similar I/O
Yaesu handheld transceiver(s) using similar 2.5mm (TxAFSK/PTT) and 3.5mm (Rx AF) "mono" I/O
RASCAL to transceiver cable for hard-keyed CW operating CBL-CW is supplied with 3.5 and 1/4" plugs to CW jacks CLICK HERE for → Solutions and Cures for Sound Card Hum Problems NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered. Additional CBLs may be ordered via the SHOPPING CART @ $14.95 each.
So you bought one of those (brand X) interfaces that do not isolate the sound card receive audio (input/ Line IN).
This ISOL8R will provide the isolation and help prevent HUM, they forgot to include.
If you only order one, order it for the Sound Card LINE OUT, to protect your Transmit audio from HUM.
ORDER 1, to isolate your transmit audio, ISOL8RSAVE and buy 2, CBL-ISOL8R , Use one for Sound Card IN, and one for SoundCard OUT.
ORDER 2, and save, ISOL8RX2Cables and Accessories
IMPORTANT NOTE; Prices of cable assemblies shown, do NOT include shipping & handling.
Shipping & Handing added to each interface cable order: 0 - 2 pounds USA=$7.90, CANADA =$7.90, Foreign=$15.90Below are cable assemblies you can use to make your
RASCAL GLX or TNC to Radio interface cables.
USB to SERIAL Adapter
OK, so you have a new PC with only a USB port, and no serial port.... Not so, any more. BUX Comm has the answer. This USB to Serial comport converter meets the specs shown below, and enables you to operate the RASCAL� interface(s) from a PC USB port. Also enables the use of TNC I/O and other serial comport devices.
Supports Windows� 98/2000/ME and CLICK HERE to Download XP drivers
Installation driver CD (included) installs serial port instantly
Supports baud rates from 1,200 to 115,200 K
Great addition for the new LapTop that came without a serial comport.
Drives the BUX Comm RASCAL"� for Auto-PTT in PSK31. etc.
USB2SC
Our Lil Lite that we include with each RASCAL GLX.
Additional lil lites are available at 99 cents each. Batteries are included. Perfect solution for finding the correct comport, or accessory jack on the dark sides of your PC or back of your transceiver. Also doubles as a sturdy "key-ring." LILITE LILITE
8 pin DIN male plug wired with 6 ft cable. All 8 pins are connected, wires are color coded, and include one drain/shield wire.
For use with ICOM, and radios with 8 pin DIN accessory jacks.May also be used to interface KAM and KAM PLUS HF ports to various transceivers.
ORDER 8D $4.99Make your own RASCAL GLX or TNC2 to Radio interface using this ready made cable. The 5DMX cable is 6 feet long, the 5 pin (male) DIN and 3.5mm external speaker plug are already attached and wired to the 5 pin DIN. All you add is the mating connector for the transceiver end. The cable is prepped with 1/2 inch of each wire exposed, and 1/8 inch bare wire stripped and solder tinned for easy radio plug installation. Cable is almond color.
$4.97 each, Order model 5DMX
This is our cable model "KVXT" which is used to make the TinyTrak, Kantronics VHF or 1200 baud cable, and in some cases, may be used to fabricate the KAMxl cables.
You add only the transceiver MIC or Accessory connector.
It is also used to make the Tiny-Trak interface cable. All you add is the Radio or transceiver connector for the accessory connector.
Order KVXT 4.97
KVXT Pre-Fab Cable, diagram shown below.
SIX (6) foot shielded cable with all 8 wires attached to the 8 pin screw-on microphone connector.
Got a new "super-mic", or need to interface another device to the mic jack.... here's the solution.
Similar to above, except has 4 pin screw-on mic connector and curly cord.
Curly cord extends to more than SIX (6) feet. Shielded cable with 4 plus shield/drain wires attached to the 4 pin screw-on microphone connector.
Got a new "super-mic", or need to interface another device to the mic jack.... here's the solution.
$3.95 each, Order Model 4M
Microphone Extension Cables: EX8 and EX4:
EX8 has 8 pin screw-on Male on one end, and 8 pin Female on the opposite end. EX8 extends to 8 feet.
EX8, 9.97
_____________________________________________________________________
EX4 has 4 pin screw-on Male on one end, and 4 pin Female on the opposite end. EX4 extends to 4 feet.
EX4, 8.97
13 pin DIN male plug wired with 6 ft (straight)
cable. All 13 pins are connected, wires are color coded, and include one drain/shield wire.
For use with KENWOOD, ICOM, and radios with 13 pin DIN jacks.
4 circuit, 3.5mm Plug and Coiled Cable
For YAESU VX-1, VX-5, FT-10, FT-40, & FT-50, etc...
Tip = 1
Ring 1 = 2
Ring 2 = 3
Sleeve = 4Order Model. VX4 $2.99
The solution for TNC to H-T interfacing for mobile and portable APRS operation. Of course, it makes a heavy-duty replacement cable for the Speaker-Mic. Standard Mic/Earphone 2.5mm & 3.5mm molded plug spacing.
Easily extends more than six feet.
Small tip = RED,
Small Sleeve=Shield/Black
Large Tip = Yellow,
Large Sleeve = WhiteOrder No. 34558 $2.99
AEA PK232 RAD1/RAD2 PREWIRED CABLE & CONNECTOR
This cable is six (6') feet long, wired to the 5 pin molex type connector for AEA PK232 Radio ports.
White wire = TX audio; Bare wire = Shield/Ground; Red wire = Push-To-Talk (PTT); Blue ware = Receive Audio
Order Model A232CBL $3.99Phone Orders: 10:00 AM to 4:00 PM (Eastern time, Monday thru Friday, Except HOLIDAYS.)
Orders Only! 434-534-8873 Orders Only!
ALL ORDERS SHIPPED SAME DAY RECEIVED, except sunday and holidays.
When placing phone orders, have list of model numbers, descriptions, and credit card, (VISA, Discover, or MasterCard) information ready. We process your order, to ship same day.
Please be sure to use correct "Ship-To" Address, ZIPcode, Callsign, and Phone number.* (* UPS required).
ALL INFORMATION IS CONSIDERED CONFIDENTIAL, AND NO INFORMATION IS SOLD, CONVEYED, OR TRANSMITTED !CLICK HERE for MORE AUDIO CABLES & CONNECTORS
Stereo "Y" connector, also works great with MONO applications, as "ring" is not used when connected into mono jack.
Use with TNC / KPC/KAM when using external speaker jack. Allows both the TNC and External Speaker for receive audio.
Order, YCONN 99 cents eachRASCAL & SOUND CARD uses 2, YCONN
Sound card six ft male to female stereo extender cables
Set of 2
(1/8") or 3.5mm stereo male, to 3.5mm stereo female, shielded extension cable. These are 6 ft, high-quality, stereo cables. Great for sound card stereo extensions to RASCAL Line IN and Line OUT or MIC IN/SPKR OUT jacks.
35MFSTX2 $2.99 /pair
RASCAL TO PC EXTENDER KIT
This cable kit allows you to space your PC and transceiver more than 15 feet apart.
This kit contains:
One (1) db9 female, to db9 male cable 6 feet, serial comport cable, and
Two (2) 3.5mm stereo female to male, sound card cables.
Combined with the 6 ft RASCAL to transceiver cables, and 6 ft, RASCAL GLX to PC cables, you can separate the radio and PC more than 15 feet.Make your own CBL, using this ready made cable. The 5DMX cable is 6 feet long, the 5 pin (male) DIN and 3.5mm external speaker plug are already attached and wired to the 5 pin DIN. All you add is the mating connector for the transceiver/radio end of the cable. The cable is already prepped with 1/2 inch of each wire exposed, and 1/8 inch bare wire stripped, and solder tinned for easy attaching to your radio mating plug. The connections to the 5 pin DIN male are also pin compatible with TNC's with 5 pin DIN jacks. e.g MFJ, PacComm, AEA PK-900, PK2232, etc. All you add is the mating connector for your radio Mic, or Accessory plug.
4.97 each, Order model 5DMXThis switcher enables you to leave your RASCAL GLX connected to the PC, and the CBLs connected to a separate transceiver accessory jacks. Switch between your VHF or HF transceiver with just the flip of the switch. No cable swapping when you have the SW5 in line. In addition, you can use this box to switch between the serial comports of your PC, or if you have only one serial comport, use the SX5 to switch between the RASCAL and another serial I/O device. The SX5 is so versitle, it can be used as a monitor switchbox via the 15 pin I/O ports. INCLUDES 1 RASCAL TO SW5 CABLE.
$ 19.95 each
Front Back
SO.., you need a 4 hole'r...
No problem, BUX COMM has the solution ! You can use this box to switch between four serial comports of your PC(s), or if you have only one serial comport, use the SW5 to switch between the RASCAL and other serial I/O devices. The SW5 is so versatile, it can be used as a monitor switchbox via the 15 pin PC monitor I/O ports. INCLUDES 1, RASCAL GLX TO SW5 CABLE.
Switch positions are labeled "A, B, C, & D," Space is provided for you to label switch positions as you wish.
Reg 44.95Order SW5,
RASCAL GLKit is the same as the RASCAL GLX, but in kit form. We've had many requests for a kit version of the RASCAL GLX. This RASCAL GLK (kit) has all the features of the RASCAL GLX, and is easily assembled and setup. It's a FUN evening project you'll enjoy. An experienced Amateur can have it on the air in less than an hour. All parts, components, black case, cables, connectors, and detailed, step-by-step instructions, are included in the kit. Transceiver to RASCAL cable INCLUDED. Additional (CBLs) are available at $14.95 each.
RASCAL "KIT" 29.97.
Additional lil lites are available at 99 cents each. Batteries are included. Perfect solution for finding the correct comport, or accessory jack on the dark sides of your PC or back of your transceiver. Also doubles as a sturdy "key-ring."
.99 each LILITEOur Shipping and Handling charges are based on the following table:
For shipments to destinations within the continental USA and CANADA
For Orders 0 to 2 pounds, $7.90 added to total.
For Orders 2 to 5 pounds, $9.90 added to total.
For Orders 5 to 10 pounds, $11.90 added to total.
For Orders 10 to 20 pounds, $15.90 added to total.
For Orders 20 to 55 pounds, $28.90 added to total.Foreign orders, 0 to 2 pounds, $15.90. Sorry, due to losses and damage, No antennas shipped outside the continental USA
The NEW 2004 Amateur Radio CD ROM: is HERE; NOW BIGGER THAN EVER! More than 450 Megabytes of Packet Radio, PSK31-SSTV-RTTY-MFSK-PACKET, and hundreds more interface diagrams, drawings, illustrations, tutorials, and MORE! CLICK HERE for more INFO about the Amateur Radio Operator's CD ROM for 2004. This CD contains MegaBytes of HAM Radio related articles, diagrams, illustrations, and drawings. Diagrams from 12 years of my Packet Users Notebook in CQ Magazine are included on this CD. For Windows 95, 98, and WINNT This CD contains full versions of WinPSK and other 'freeware' programs for use with PSK31, Packet, SSTV, RTTY and more.
$9.95 ORDER 2004CD
This CD is included FREE with purchase of the RASCAL GLX & GLKit.
Sorry, we do not support soundcard program software. For soundcard software & program support, contact the software vendor or author.
BUX Comm Evington, VA 24550 FAX 434 525 7818
Wanna operate Packet Radio with the RASCAL..., Ralph Milnes, KC2RLM did an excellent job designing a web site that provides step-by-step instructions for running Sound Card Packet. It illustrates the best methods to configure and use the AGW Packet Engine with various packet and APRS� programs, including: WinAPRS, APRSplus, UI-View, WinPack, AGWTerm, AGWMonitor, and AGWCluster. If you would like to run packet with the RASCAL, go to Ralph's web site for the latest Packet Radio operation via the sound card and the RASCAL (Radio And Sound Card Adapter Link).
CLICK HERE to download RASCAL GLX to REPEATER interface Instructions via EchoLink
ALL MATERIAL, TEXT AND GRAPHICS ON THESE PAGES ARE � COPYRIGHT of, and by, G. E. "Buck" ROGERS Sr, K4ABT.
ALL RIGHTS ARE RESERVED, 1994-2004 Reproduction in any form must have the written permission of the author.
Shipping/Handling & warranty Return policy
* "RASCAL" is Registered trademark �� of BUX Communications Corp (BUX CommCo �) *(RASCAL�� "Radio And Sound Card Adapter Link")
RASCAL
