Communications and Electronic Audio Connectors, RF Connectors, Parts, Components, and Devices at discount prices.

Description

illustration

↓

HAM Radio Replacement Microphones. ~~regular~~ $~~24.95~~ $ 15.97 each

Alinco 8 pin Screw-On Mic AL8MIC HAM Radio Replacement Microphone. $ 15.97 Black, replacement microphone with plug wired for specific radios. This is a high-quality microphone with connections wired for Mic and PTT only, (No Up/Down buttons).

ADI 8 pin Screw-On Mic AD8MIC HAM Radio Replacement Microphone. $ 15.97 Black, replacement microphone with plug wired for specific radios. This is a high-quality microphone with connections wired for Mic and PTT only, (No Up/Down buttons).

Kenwood 4 pin Screw-On Mic KW4MIC HAM Radio Replacement Microphone. $ 15.97 Black, replacement microphone with plug wired for specific radios. This is a high-quality microphone with connections wired for Mic and PTT only, (No Up/Down buttons).

Kenwood 8 pin Screw-On Mic KW8MIC HAM Radio Replacement Microphone. $ 15.97 Black, replacement microphone with plug wired for specific radios. This is a high-quality microphone with connections wired for Mic and PTT only, (No Up/Down buttons).

Yaesu 4 pin Screw-On Mic YA4MIC HAM Radio Replacement Microphone. $ 15.97 Black, replacement microphone with plug wired for specific radios. This is a high-quality microphone with connections wired for Mic and PTT only, (No Up/Down buttons).

Yaesu 8 pin Screw-On Mic YA8MIC HAM Radio Replacement Microphone. $ 15.97 Black, replacement microphone with plug wired for specific radios. This is a high-quality microphone with connections wired for Mic and PTT only, (No Up/Down buttons).

Icom 4 pin Screw-On Mic IC4MIC HAM Radio Replacement Microphone.
$ 15.97 Black, replacement microphone with plug wired for specific radios. This is a high-quality microphone with connections wired for Mic and PTT only, (No Up/Down buttons).

Icom 8 pin Screw-On Mic IC8MIC HAM Radio Replacement Microphone.
$ 15.97 Black, replacement microphone with plug wired for specific radios. This is a high-quality microphone with connections wired for Mic and PTT only, (No Up/Down buttons).

CB Replacement Microphones $15.97 each (No Up/Down buttons). Back To Top

COBRA & Uniden 4 pin Screw-on MIC4
CB Microphones $15.97 each
Black, replacement microphone with plug wired for specific radios. This is a high-quality microphone with connections wired for Mic and PTT only, (No Up/Down buttons).

COBRA 5 pin DIN MIC5Q CB Microphone $15.97 each
Black, replacement microphone with plug wired for specific radios. This is a high-quality microphone with connections wired for Mic and PTT only, (No Up/Down buttons).

Midland 4 pin, Screw on MIC4M CB Microphone $15.97 each
Black, replacement microphone with plug wired for specific radios. This is a high-quality microphone with connections wired for Mic and PTT only, (No Up/Down buttons).

Realistic 5 pin DIN MIC5QR CB Microphone $15.97 each Black, replacement microphone with plug wired for specific radios. This is a high-quality microphone with connections wired for Mic and PTT only, (No Up/Down buttons).

COBRA & Uniden 5 pin Screw-on MIC5 CB Microphone $15.97 each
Black, replacement microphone with plug wired for specific radios. This is a high-quality microphone with connections wired for Mic and PTT only, (No Up/Down buttons).

Power Microphone

A Hi-Performance, to add punch to your audio, ready for easy installation. MIC uses standard AA 1.5 volt battery. Wire lead identification: RED = Audio Out WHITE = TRANSMIT (PTT) BLUE = RECEIVE BLACK = COMMON SHIELD = GROUND
Model PT-433 ~~$28.95~~ Now $21.95

HARD ABS Mic hanger, attaches to smooth surface with strong double-sided, durable adhesive (included).
2 for 99� Order MH3B

Chrome, metal mic-hanger. Mounting screws are included.
2 for 99� Order MH2M

Speakers, and Accessories Back To Top

3.5mm Stereo jack. Although made for PC board mounting, they can be used to make "in-line" jacks for sound-card applications. 2/.99 35SPCJAK

Four (4) inch, 10 Watts Power, 8 ohm impedance, with Noise-Canceling switch. 10 ft. cord with 3.5mm (1/8") plug. Mounting hardware is included. Model 7-12 $9.95

Model 7-24P, $7.95

5 Watts Power, 8 ohm impedance, with 10 ft. cord with 3.5mm (1/8") plug. Mounting hardware is included.

VOLUME CONTROLS, POTS & KNOBS Back To Top

1-1/2" diameter, Simi-Hard rubber knobs fit 1/4" shaft. This knob has a nice look and feel to it for any project. The half-moon insert can be removed, and the 2 set-screws will attach the knob to "round" 1/4 inch shaft.
1-1/2" diameter. 3 for $1.99 RUBRKNOB3

2.5k Vertical Mount, thumb-wheel pot.
2 for .99 p/n VP2500

2.5k Vertical Mount

10 K pot for audio level control in PSK31 and SSTV interface circuits where transceiver (input & output) jack(s) to sound-card I/O is required.

10k pot 3/.99 10KUPOT

5 k pot 3/.99 5KUPOT

Repeat of a sell-out. We sold out last fall, so we went looking. Found a few thousand more 1/4" miniature, 470 ohm PC mount pots 4/.99 470POT

10K pot with On/Off switch. Shaft is 1/4". Comes complete with knob and mounting hardware.
99 � each 10KWKNOB

Radio Mounting Hardware Back To Top

RADIO MOUNTING KNOBS
3 MM ORDER # KN3P @ 2/$1.49

4 MM ORDER # KN4P @ 2/$1.49

5 MM ORDER # KN5P @ 2/$1.49

6 MM ORDER # KN6P @ 2/$1.49

3 MM ORDER # KN3P 2/$1.49
4 MM ORDER # KN4P 2/$1.49
5 MM ORDER # KN5P 2/$1.49
6 MM ORDER # KN6P 2/$1.49

Adjustable Radio Bracket

This mounting bracket expands to 10 inches. Makes it easy to move your mobile radio from the vehicle to another location. ~~Original price; $14.95~~
6.95 each ARB2

EXPANDABLE, Jiffy In/Out,
MOBILE MOUNTING BRACKET

This mounting bracket expands to 6-1/2 inches. Jiffy In/Out, uses Vel-Cro� type strap makes it easy to move your mobile radio from the vehicle to another location. ~~Original price; $11.95~~ 1.99 each VXMOUNT

PC and Radio Specialized Connectors Back To Top

DB25 FEMALE WITH SOLDER PINS
3/99 DB25FSP

DE9 FEMALE WITH SOLDER PINS
2/99 DB9FSP

DB9 female for printed circuit board mounting. Standard pin spacing, and pins are brass.
2/99 DB9PCBT

DB25 FEMALE WITH PC BOARD PINS
2/$1.00 DB25FPCB

40 PAIR PIN
Break-Away Headers.
These header/jumper pins come in 40 pair lengths, which can be broken apart into smaller sections. Standard jumper-pin
spacing. 2 sticks of 40 pair, .99 cents
HEDR40

JUMPERS, Shorting Bridges, Strapping Options..etc
Here are the strapping/shorting jumpers for the headers shown next door. Same "standard" spacing as the pins of our stock item, HEDR40. Also fits hard-drive headers and all TNC headers 20/.99 JMPR

8 PIN Connector/Jack I cut off 3 pins and made a perfect-fit connector for my AEA PK232 I/O from my transceiver.

4/.99 8PINHDR

SWITCHES & RELAYS Back To Top

Single Pole, Double Throw, On/On switch.
$ .69 ea SW-513

Similar to above, except it is DPDT
Double Pole, Double Throw, On/On switch.
$ .89 ea SW-523

Single Pole, Double Throw, On/On switch.
$ .69 ea SW-513

Similar to above, except it is DPDT Double Pole, Double Throw, On/On switch.
$ .89 ea SW-523

On/Off/On, Center OFF Switch. One way is momentary (spring-return to center), other way is ON, until returned to center. With mounting hardware. 99� each CTROFFSW

Illuminated switch,
similar to switch used on Astron power supplies. Contacts 12 amps @ 120 VAC. ~~Reg 4.95,~~ REDLITSW BUXcomm price, $1.99

This is the same, 16 position Hexadecimal switch I use as a channel selector on the 16 and 32 channel RANGR and DELTA radio mods. Switch detent positions total 16. The truth table is ''REAL'' not ''Complimentary.'' 99� each

These Push-ON, and Push again for OFF, Double Pole, Double Throw mini-switches provide an ideal way to manually switch between PSK31 transmit and receive, or between microphone and SSTV. .5 amp 2/99 MINIPOPO

This Push-ON, and Push again for OFF, Double Pole, Double Throw Switch is sometimes used as a ''manual'' means of switching between PSK31 transmit and receive. DPDT @ 2 amp 99 � each DPDTPOPO

TOROIDS, FERRITES, and RFI SUPPESSORS Back To Top

Snap-Together Ferrite Choke
The Snap-on Ferrite Choke has proven to be an effective means of suppressing RFI in multi-conductor cables and wiring. EZ installation, just place these around the cable and snap together.
$3.97each 10 for 34.95

One for $3.97each

10 for 34.95

TOROID Bobbin is 1-1/4 inch outside diameter. Inside diameter is 7/8 inch. Type 43 material recommended use in Baluns 3-200 MHz. 2600 gauss @ 12 oersted. Ideal bobbin size for the heart of a 4:1 Antenna Matching Balun.
$1.99 T43BOBN

Powdered Iron Composition material, recommended use in High Powered BALUNs. When you want to build a heavy-duty 4:1 or 1:1 BALUN, this is when we get serious about building those legal-limit 'Kick-Bootie' BALUNS. We reach for the bin with our 3001 dough-nutz in it. Outside diameter is 1 & 5/16 inches, and inside diameter is .75 (3/4) inch. If you're serious about building a BALUN that rocks, then stack a couple of these dough-nutz together and you're cook'n. Just don't dip it in your coffee, this dough-nut can ruin a good denture !!! 1.7 to 200 MHz. Ideal bobbin size. The heart of our 4:1 BUX Balun.

$3.97 each 3001

10 for $24.99
3001X10

These Ferrite bobbins are over 1.5 inches, and are the perfect size for Mini 8 Coax.

Use a stack of them to build your next 'Current' BALUN'

.99 ea, 6110

20 for 17.97

DUAL COIL Wrapped on toroid doughnut. One (1) inch OD, 1/2" ID. Each winding measures 1.313 mHy. May be stacked for balun use, or used as power-line RFI choke. Wire is number 18 solid copper. $1.49 each T1313

DUAL COIL Wrapped on toroid doughnut. 1-1/8 inch OD, 5/8" ID. Each winding ia 1.63 mHy. May be stacked for balun use, or used as power-line RFI choke. Wire is number 16 solid copper. $1.95 each T1630

These Ferrite bobbins are 1/2 OD inches, and are the perfect size for stacking on RG-8X/Mini 8 Coax.

Use a stack of them to build your next 'Current' BALUN'

Use also to wind small baluns for interstage coupling or QRP BALUN's.

TOR30 30� each

TOR30X20 20 for $5.00

1 @ 30� each

20 for $5.00

These Ferrite bobbins are used in RF coupling stages and to make interstage matching transformers for many RF projects..

Use a stack of them to build your next 'Current' BALUN' using small coax, RG-58 or smaller.

TOR19 30� each

TOR19X20 20 for $5.00

1 @ 30� each

20 for $5.00

POWER CONNECTORS, CABLES, and BINDING POSTS Back To Top

Model CB-8 Our most popular Power Cable/Connector combo with dual, heavy duty, in-line fuse holders and fuses. IN STOCK, Ready to ship !
Kenwood TS-450, 2000 etc, Order Model CB-8
Icom 706 etc..  =                Order Model CB-8
ALINCO DX-70 =                Order Model CB-8
RCI-2970          =                Order Model CB-8
Various Yaesu & Icom (706 etc) transceivers (verify connector)   ~~Regular. 24.95~~    Price $14.97

DC connector only, for many Kenwood, Alinco, Icom, and YAESU transceivers. Less cable & fuse holder. SOCB-8 $2.97 each
DEALERS, Notice; 10, SOCB-8 for 24.97

SOCB-8 $2.97

SOCB-8x 10 for 24.97

IC2000 POWER CABLE, and connectors.. also fits other Icom, Alinco, Kenwood, and Radio Shack transceivers with similar power input plugs. Power plug and cable wired with two fuse holders, 10 ampere fuses and 15 feet of heavy wire installed. Uses same plug and jack as shown above(top of this colum).
$9.97 Order IC2000

"T" type MALE and FEMALE, DC Input connector for many late model ICOM, Radio Shack, some ALINCO and Amateur Radio transceivers having similar DC input connector. Order No. IC-1 $1.

CB-9 Uniden HR-2510
Order CB-9 ~~Regular. 24.95~~ Price $16.97

ORDER CB2 $2.95 each

CB2 is two wire, 2 socket, with in-line fuse holder. Dimple keyed to preserve polarity

Order CB2-P $3.95 each CB2-P Same as CB2, except has cigarette

ORDER CB4 $2.95 each CB4 is three wire, 3 socket, with in-line fuse holder. One side is "point" keyed to preserve polarity

ORDER CB4-P $3.95 each CB4-P is same as CB4, exept has added cigarette lighter plug. One side is "point" keyed to preserve polarity.

Binding Posts Pair, One RED and One BLACK. With all mounting hardware.
One RED and One BLACK for $1.97

SOLID BRASS BINDING POSTS. Sold in pairs only, One RED banded, and one BLACK banded. These are the heavy-duty binding posts we use on our BUX BALUN 41 and BUX BALUN 11. Also used in homes for sound and speaker drops for high-wattage sound systems. Complete with hard-brass mounting hardware. Ends and side holes are machined to accept standard size banana plugs. ONE RED (ring) & ONE BLACK (ring) (PAIR) $2.99,

ORDER "SBPOST " BUY

Every Ham-shack, and commercial radio shop will find this to be one of the best bargains on this page. Now you have a complete selection in one assortment. Splices, Spade, single-hole, bare, Red, Blue, Push-on accessory terminal, and many more. Number 4-6 spade connectors, for number 16, 18, & 20 wire. Number 6-8 spade connectors, for number 16, 18, & 20 wire. Number 4-6 round connectors, for number 16, 18, & 20 wire. Bag of more than one (100) terminals $1.99 bag, 100TERM

ORDER CB5 $2.95 each CB5 is three wire, 3 pin socket, white three pin/socket connector with in-line fuse holder. Sockets are flat-side, round keyed to preserve polarity.

ORDER CB5-P $3.95 each CB5-P is three wire, 3 pin socket, white three pin/socket connector with in-line fuse holder, and cigarette lighter plug. Sockets are flat-side, round keyed to preserve polarity.

ORDER CB6 $2.95 each CB6-P is two wire, 3 pin socket, white three pin/socket connector with in-line fuse holder. Sockets are flat-side, round keyed to preserve polarity.

ORDER CB6-P $3.95 each CB5-P is two wire, 3 pin socket, white three pin/socket connector with cigarette lighter plug. Sockets are flat-side, round keyed to preserve polarity.

Order CB2CMT 99 cents each Chassi mount mate to CB2 or CB2-P. Solder plug pin post, and keyed with dimple to preserve polarity

Field Day, Some Day, Any Day.. or for the RV, here is a cigarette lighter receptacle with battery clips attached. This connection enables you to power an external 12 VDC device from your 12 volt DC vehicle battery. Leads and battery CLIPS are colored RED (positive) and BLACK (negative).ORDER No. CIGCLIP ~~Reg. $7.95~~ Price $1.99

Heavy-Duty Power Input Jack
Same size as the power input jack on most Packet Radio TNC and Kantronic KPC/KAM. Can be wired for "open/closed-circuit" or standard power input. Mounting hardware is included. 2 for 99 cents PWRJAK

FUSE HOLDERS, Fuses & Equipment Lightning Protection Back To Top

AGC IN-LINE WATERPROOF FUSEHOLDER (3AG & AGC)
This fuse holder is ideal for boats and power leads that need a moisture barrier to seal from water and saline environments. In-line waterproof fuseholder for AGC / 3AG fuses (1/4" x 1 1/4"). Yellow rubber boot. Fuse ends crimp to wire size, from #12 to #18 AWG.
$ 2.97 each Order No. WPFH

3AG/AGC type Fuses, 5 per Pak.

.99� Pak AGC 5
.99� Pak AGC 10
.99� Pak AGC 15
.99� Pak AGC 20
.99� Pak AGC 25

Heavy Duty automotive, ATC blade type Fuse-Holder with weather proof cover. ATC In-Line, weatherproof cover, and 6 inch # 10 wire leads. Perfect for that mobile linear, or power to the transceiver. HDAFH

Order 1.99

10 for 9.95

ATC Blade Fuses

4/.99, 10 Amp
4/.99, 20 Amp
4/.99, 30 Amp

This is the Super Fuse Holder and # 8 wire you've been looking for, to power to that mobile linear, or DC power amplifier. 20 inches of # 8 stranded wire, and bakelite holder. Uses large "AGU" fuses shown below. $4.97 FHAGU8

↓

⁭

"AGU" FUSES These are the bigg'uns. Fits FHAGU8 ⁭

⁭

99 ea 30 AMP
99 ea 40 AMP
99 ea 50 AMP
99 ea 60 AMP
99 ea 80 AMP

Secondary Lightning Protector
Remember the axiom; "An ounce of prevention is worth a pound of cure." We offer this device as a secondary radio protector. This lightning protector contains a modified spark gap that provides that ounce of prevention. There is no substitute for a good earth ground, AC line surge, and spike protection. Keep all ground leads as short as possible. Where lightning is involved, we make no warranties. $ 4.97 each 7516

CLEAR LENSE when off, and Brite "Red" when ON. Order REDLED 5 for 99�

Voltage:	1.5V
Chemistry:	Alkaline
Dimensions:	.457" D x .213" H

Button Batteries, Ideal for the following:
- Pocket, KeyChain Lites

- Small Flashlites, - Laser pointers -Watches, - Cameras
- Alarm transmitter, - Rescue, - Children Books,- Caluculators, - Blood Pressure Instrument - Sugar Level Detectors Set of 4 for 99 cents AG13

UM-9401/MA-47266 PIN Diode, used in VHF & UHF transceiver Tx/Rx switching circuits.
.99 each UM9401

5 volt DC, SPDT, 325 ohm coil. This small relay is only 3/8"x3/8"x1/4" $0.99 each 5VDCSPDT

Audio and Microphone Connectors & Cables Back To Top

Microphone Plug (female), TYPE "CBC"		IN-LINE MALE EXTENDER, TYPE "CE"	Chassis Mount (male), TYPE "CMC"	Right angle Mic connectors

PART No. (TYPE)	Pins	Description	Price Each	↓
CBC2	2	MICROPHONE, FEMALE	$1.99 ea.
CBC3	3	MICROPHONE, FEMALE	$1.99 ea.
CBC4	4	MICROPHONE, FEMALE	$1.99 ea.
CBC5	5	MICROPHONE, FEMALE	$1.99 ea.
CBC6	6	MICROPHONE, FEMALE	$1.99 ea.
CBC7	7	MICROPHONE, FEMALE	$1.99 ea.
CBC8	8	MICROPHONE, FEMALE	$1.99 ea.
CMC2	2	CHASSI MOUNT, MALE	$1.99 ea.
CMC3	3	CHASSI MOUNT, MALE	$1.99 ea.
CMC4	4	CHASSI MOUNT, MALE	$1.99 ea.
CMC5	5	CHASSI MOUNT, MALE	$1.99 ea.
CMC6	6	CHASSI MOUNT, MALE	$1.99 ea.
CMC7	7	CHASSI MOUNT, MALE	$1.99 ea.
CMC8	8	CHASSI MOUNT, MALE	$1.99 ea.
CE2	2	IN-LINE MALE EXTENDER	$2.99 ea.
CE3	3	IN-LINE MALE EXTENDER	$2.99 ea.
CE4	4	IN-LINE MALE EXTENDER	$2.99 ea.
CE5	5	IN-LINE MALE EXTENDER	$2.99 ea.
CE6	6	IN-LINE MALE EXTENDER	$2.99 ea.
CE7	7	IN-LINE MALE EXTENDER	$2.99 ea.
CE8	8	IN-LINE MALE EXTENDER	$2.99 ea.
C-8R	8	Right Angle, 8 pin Screw-On Mic Connector	$2.99 ea.
C-4R	4	Right Angle, 4 pin Screw-On Mic Connector	$2.99 ea.
XLR Male	3	3 pin (XLR male) audio connector used for microphone inputs in amateur radio, broadcast Radio & TV stations	$4.99 ea.
XLR Female	3	3 pin (XLR female) audio connector used for microphone inputs in amateur radio, broadcast Radio & TV stations	$4.99 ea.
	www	BUXCOMM	com
XLR 20 ft extension Made of high-quality three conductor audio cable. Broadcast applications, and other microphone and sound-system uses. Added a Heil Mic lately... give yourself some space. $14.97 Order XLRMF20

Supports Windows� 98/2000/ME and
CLICK HERE to Download XP drivers Installation driver CD (included) installs serial port instantly Supports baud rates from 1,200 to 115,200 K Great addition for the new LapTop that came without a serial comport. Drives the BUX Comm RASCAL"� for Auto-PTT in PSK31. etc. ADD A SERIAL (comport) to your PC or laptop without removing it from the case. $19.95 each ORDER No. USB2SC

USB Cable, Male Type A to Male Type B, 6 feet long, 6 foot, USB CABLE standard A-B USB interface cable for printers, and other USB to PC applications.Shielded with internal "drain wire."
1.99 USB6F ↓

Five (5) pin DIN to 4 RCA male plugs.
36" shielded leads molded as one cable.

Pin 1 to RED
Pin 2 to Grnd/Shields
Pin 3 to Yellow
Pin 4 to Black
Pin 5 to White

$4.97 5D4RCA

Six (6) ft, 5 pin DIN, male to female cable. This cable is used as an extension from the RASCAL GLX to the matching RASCAL to Radio CBL. The BUX COMM 5D6MF has hundreds of other uses and applications. $4.90 Order 5D6MF ↓

Microphone Extension Cables

EX8 has 8 pin screw-on Male on one end, and 8 pin Female on the opposite end. EX8 extends to 8 feet. EX8 9.90

EX4 has 4 pin screw-on Male on one end, and 4 pin Female on the opposite end. EX4 extends to 4 feet. EX4 8.90

EX8 Mic Extender

EX4 Mic Extender

Quarter-inch, mono plug is often used for head phone connections and external speaker plug. Known as the 1/4 inch mono plug.
Order 25MONO $1.00

Quarter-inch Stereo plug is often used in High Power Audio systems. The 1/4 inch stereo plug is also used as Microphone input and PTT for some Collins, Drake, Heath, Ten-Tec, etc... transceivers.
Order No. 25SMIC $1.25

2.5mm Mono Plug $ 0.45 ea # 25MP

2.5mm Stereo Plug $0.65 ea # 25SP

3.5mm Mono Plug (1/8inch) $0.75 # 35MP

3.5mm Stereo Plug (1/8inch) $0.85 # 35SP

3.5mm Stereo jack. Although made for PC board mounting, They may also be used to make "in-line" jacks for sound-card applications. $0.75ea order 35PCBJAK

6 PIN MINI DIN JACK

This is the same type female connector used as the ISO standard I/O on many late model transceivers. Has PCB pins, or can be soldered to to make extension cables. 99� each, MDIN6JAK

SIX pin "Mini" DIN Plug (MALE)
Used as accessory plug to interface data input and output on many transceivers. e.g. PSK31 I/O
$1.50 each Order # 6PDMDIN

Male, 6 pin mini DIN with cable attached. Used with most transceivers having the ISO "standard" data input/output jacks. All wires are color coded for easy signal routing. $1.99 each Order 6MDN ↓

Standard 4 pin DIN Plug Used as RTTY and CAT accessory plug I/O on some transceivers for RTTY interfacing (I/O). .99 ea Order # 4PDM

5 ft cable, wired to 4 pin DIN male connector. Pin 4 is bare/shield/ground.
1=White
2=Blue
3=Red
4=BARE/Shield Order 4D @ $4.99

Standard 5 pin DIN Plug Used as accessory port I/O on some transceivers for PSK31 and SSTV sound card interfacing (I/O). Also a very popular TNC interface connector to PacComm, MFJ, and AEA TNC, radio ports. $ .99 ea # 5PDM

5 pin DIN cable pre-wired with all 5 pins connected, with shield and drain wire. This cable is used to interface RASCAL GLX to PC sound card & Radio. Also mates the 5 pin I/O jack on most TNCees. 6 feet, All wires are color coded.With 5 ft shielded cable, wired to 5 pin DIN male connector. Order 5D @ $1.99

5 pin DIN Chassi Mount Female
5DCMF, Female 5 pin DIN jack may be panel mounted, or combined with another similar connector to form an in-line adapter cable. 5DPCF is same except is for PC board mount. .79 ea Order 5DCMF

5DCMF

5 pin DIN Printed Circuit board mount. 5DCMF, Female 5 pin DIN jack may be panel mounted, or combined with another similar connector to form an in-line adapter cable. 5DPCF is same except is for PC board mount. .97 ea Order 5DPCF

Don't forget that AEA PK232 plug that is so hard to find.... BUX COMM has them in stock! Plug for the AEA PK-232 TNC. Order 232F5, 2 for 99 cents

YES, we also have the male (jack) counterpart to the above "female" plug. Make an extension, or buy both parts (see insert), and mate for other connector applications. 2 for 99 cents, Order 232M5

Metal Shielded RJ45 jack or CAT 5 jack, with pins for printed circuit board mounting. We use these to make RJ45 extensions for ICOM and other transceiver microphones. Great for switchbox I/O for MIC/PSK31 interface. 2 / 99� RJ45PCBJ

RJ45 Plug 4/$1.00 ea. Order RJ45P

Standard 7 pin DIN Plug used as CAT interface plug on some transceivers for Computer Aided Tuning (CAT) (I/O). $1.25 each Order 7PDM

shielded cable, wired to 7 pin DIN male connector.
Order 7D @ $4.99

Standard 8 pin DIN Plug Used as accessory plug to interface data input and output to many ICOM transceivers. e.g. PSK31 I/O, and KAM HF port. $1.49 ea Order 8PDM

Standard 8 pin DIN Plug with 5 ft cable, wired for ICOM 8 pin accessory jack, All 8 pins have wires, and color coded.
ORDER 8D @ $4.99

Standard 13 pin DIN Plug MALE
Used as accessory plug to interface data input and output to many Kenwood & Icom transceivers. e.g. PSK31 I/O $1.49 ea. Order 13DMP

13 pin DIN MALE plug and 6 ft cable. All 13 pins are connected, wires are color coded, and include one drain/shield wire. Use with KENWOOD, ICOM, & radios with 13 pin DIN jacks.
$5.90 ea. 13D

Standard 13 pin DIN Inline FEMALE Jack Mates 13 pin DIN male. Used as accessory jack to interface data input and output to many Kenwood & ICOM etc.. transceivers. $2.49 ea Order 13PDFIL

Used in PSK31 transceiver to sound-card interface, this shielded, twin cable has two, 3.5mm stereo connectors on one end. When using with PSK31, SSTV, RTTY, and Packet Sound card interfaces, only the "tip" of each connector is used; The "ring" is not used. NOTE that a large ferrite core is molded into each line near the sound card end of the cable. This is another means of preventing noise and RF feedback. Twin cable is four feet long. .99 � each SCABLE

Sound card six ft male to female stereo extender cables (1/8") or 3.5mm stereo male, to 3.5mm stereo female, shielded extension cable. These are 6 ft, high-quality, stereo cables. Great for sound card stereo extensions to RASCAL Line IN and Line OUT or MIC IN/SPKR OUT jacks. 35MFSTX2 $2.99 /set of 2.

RASCAL EXTENDER KIT Combined with the 6 ft RASCAL to transceiver cables, and 6 ft, RASCAL GLX to PC cables, this kit adds another 6 feet, allowing you to separate your transceiver and PC more than 15 feet apart. This kit contains:
One (1) db9 female, to db9 male cable 6 feet, serial comport cable, & Two (2) 3.5mm stereo female to male, 6 feet, sound card cables. 4.⁹⁹ Order Model RXK

8 pin DIN male plug wired with 6 ft cable. All 8 pins are connected, wires are color coded, and include one drain/shield wire. For use with ICOM, and radios with 8 pin DIN accessory jacks. May also be used to interface KAM and KAM PLUS HF ports to various transceivers. $4.90 ea. ORDER No. 8D

See cable diagram and wire color codes below.
↓

Make your own CBL, using this ready made cable. The 5DMX cable is 6 feet long, the 5 pin (male) DIN and 3.5mm external speaker plug are already attached and wired to the 5 pin DIN. All you add is the mating connector for the transceiver/radio end of the cable. The cable is already prepped with 1/2 inch of each wire exposed, and 1/8 inch bare wire stripped, and solder tinned for easy attaching to your radio mating plug.
$4.90 each, model 5DMX

See cable diagram and wire color codes below.
↓

5DMX

SIX (6) foot shielded cable with all 8 wires attached to the 8 pin screw-on microphone connector. Got a new "super-mic", or need to interface another device to the mic jack.... here's the solution. $4.90 each, Order Model 8M

See cable diagram and wire color codes below.
↓

PLUG & JACK COMBO PJ25
High Quality at half the price ! 1/4 inch Stereo, Plug & Jack set. Complete with all mounting hardware. Jacks are "closed-circuit" type, however they may be wired configured as; Mono, Stereo, or Open-Circuit. set (Plug & Jack) $3.99

Transistors, & RF Power Amplifier Modules Back To Top

2N7000 N-Channel Enhanced Mode Field Effect Transistors. These devices are used in many RASCAL GLX and GLK sound card interfaces, as they have been designed to minimize on-state resistance while providing rugged, reliable, and fast switching performance. They can be used in most applications requiring up to 400mA DC and can deliver pulsed currents up to 2A. These products are particularly suited for low voltage, low current applications. Because of their insulated gate feature, they also perform a measure of isolation between gate and source.

2/ .99, 2N7000

This transistor is used in some PSK31 circuits to activate transceiver PTT. Control of the PTT action is via software.
The same PTT feature is activated in SSTV/sound card software. 4 / .99 MPN2222

This device is designed as a general purpose amplifier and switch. The useful dynamic range extends to 100 mA as a switch and to 100 MHz as an amplifier. Employed in many PSK31 interfaces as the PTT switch.

2N3904 NPN Transistor with short, formed leads for Printed Circuit Board installation. 5 / .99, 2N3904S

YES, we have them, and SUCH a deal.
While others sell the MRF 515 at 5 times the price, we bought enough to get large, Quantity Discount.MRF 515 is an RF power transistor used in hundreds of Amateur Radio QRP projects, and used in many driver stages of other RF PAs. The MRF515 ratings are:
Type=NPN
Case=TO 39
18V @ 0 .15A
RF PO @7.5VDC - 470 MHz = 0.75W
Total Dissipation = 2.5 watt @ 470 MHz
Works great at HF, VHF, &-UHF.
Power out tests @ 13.5 V, @ 450 MHz; 1 watt.

Reg price is ~~$7.50~~

99 � each MRF-515

20 for 17.97 MRF-515X20

The SRF 103 ratings are:
Type=NPN Silicon
Case=TO 46
18V @ 150 mA
RFPO @ 7.5VDC @ 450 MHz = .25 watt
Total Dissipation = 0.5 watt @ 470 MHz
Good driver/multiplier at HF, VHF, &-UHF.
2 for .99 SRF-103

460 - 512 MHz. 6.5 Watts @ 7.5 Volts
Primary use is UHF 5 watt output handhelds. Similar to RF PA module MHW-707-4 or GE 19A705419. ~~Regular $57.00~~ $4.99 each.

GE p/n 19A705419.
5419P4,

M68702L RF power module for many Icom, Kenwood, Yaesu, Alinco, → more
VHF transceivers. 135-160MHz, 12.5V, 60W OutPut, FM mobile radio

39.95 each

10 for 297.97

RF Connectors and Cables Back To Top

VIEW	PART No.	DESCRIPTION	PRICE Each	PRICE for 10
	7506	High Quality, PL-259 UHF connector for RG-8 coaxial cable. "Twist-On" (standard type for RG-8, RG-213, 9913..etc...)	$ 0.99 ea	10/$9.60
	7507A "A"=RG58	Reducer/Insert for 7506 7507-A for RG-58	$ 0.28 ea	10/$2.50 A
	7507B "B"=RG59	Reducer/Insert for 7506 7507-B for Mini 8 and RG59	$ 0.28 ea	10/$2.50
	7504A	UHF MALE TWIST-ON, WITH BUILT-IN ADAPTER. 7504-A for RG-58	$ 0.99 ea	10/$9.60
	7504B	UHF MALE TWIST-ON, WITH BUILT-IN ADAPTER. 7504-B for RG59 and *Mini 8 Coax.*	$ 0.99 ea	10/$9.60
	7517	PL-258 type barrel connectors are often called ''double female.'' Ultra-low-loss, Hi-Temp dielectric center insulator.	$ 0.99 ea	10/$9.60
	7514	VHF/UHF connector is ideal when coupling two SO-239 connectors back-to-back, and in-line meters to SO-239. Ultra-low-loss, Hi-Temp dielectric center insulator.	$ 1.49 ea	10/$12.99
	7525	Right-angle VHF/UHF connector is ideal for sharp 90 degree coax turns, or in a small place, or where transceiver back space is limited. Ultra-low-loss, Hi-Temp dielectric center insulator.	$ 2.29 ea	10/$20.99
	7526	UHF type coaxial, Female, Male, Female "TEE" When you want to co-phase those beams, quads, or build power dividers. Ultra-low-loss, Hi-Temp dielectric center insulator.	$ 2.29 ea	10/$20.99
	7527	"UHF" type, coaxial, Female, Female, Female "TEE" When you want to co-phase those beams, quads, or build power dividers. Ultra-low-loss, Hi-Temp dielectric center insulator.	$ 2.45 ea	10/$22.99
	7512	The Single Hole (SO239) chassi mounted coax connector is is supplied with mounting hardware.	$ 1.35 ea	10/$12.50
	7511	The '4 hole'r' chassi mounted coax connector is attached using 4 screws. For HF (1 to 30 MHz).	$ 1.35 ea	10/$12.50
	7511STG	Four hole Silver flashed, with Teflon insulator, chassi mounted coax connector is attached using 4 screws. Great for low-loss (VHF and UHF) applications.	$ 1.39 ea	10/$12.99
	7702	RCA male to UHF female, or this adapter may be used to connect the PL259 UHF male to Auto Radio type female. This adapter is most often used to connect UHF (PL259) male to scanner antenna jack.	$ 1.99 ea	10/$17.90
	2613	Automotive type Radio antenna connector.	$ 0.99 ea	10/$9.60
	7001A	BNC MALE Crimp Type for RG-58/U coax	$ .99 ea	10/$9.60
	7001B	BNC MALE Crimp Type for RG-59/U coax	$ .99 ea	10/$9.60
	7003A	BNC MALE for RG-58/U coax, for Crimp and Molding. OD: 9.5mm.	$ .99 ea	10/$9.60
	7003B	BNC MALE for RG-59/U coax, for Crimp and Molding. OD: 9.5mm.	$ .99 ea	10/$9.60
	7006A	BNC MALE for RG-58/U coax, CLAMP type.	$ 1.10 ea	10/$9.90
	7006B	BNC MALE for RG-59/U coax, CLAMP type.	$ 1.10 ea	10/$9.90
	7022A	BNC FEMALE for RG-58/U coax, CLAMP type.	$ 1.10 ea	10/$9.90
	7022B	BNC FEMALE for RG-59/U coax, CLAMP type.	$ 1.10 ea	10/$9.90
	7061	BNC FEMALE to FEMALE, BNC barrel. Used to join 2, male BNC.	$ .99 ea	10/$9.60
	7077	BNC, "Female, Male, Female" "TEE" Ultra-low-loss, Hi-Temp dielectric center insulator.	$ 1.95 ea	10/$17.90
	7080	BNC, Female, Female, Female "TEE". Ultra-low-loss, Hi-Temp dielectric center insulator.	$ 1.95 ea	10/$17.90
	7519	This is a BNC female to UHF (PL259) male adapter is used to connect the BNC male antenna to SO239 female UHF.	$ 2.20 ea	10/$20.60
	7059	BNC Male to UHF Male.	$ 2.99 ea	10/$27.60
	7060	Best known as the ''adapter'' used to connect the mobile PL-259 connector to the hand-held BNC antenna port.	$2.99 ea	10/$27.60
	7074	BNC Female to UHF Female.	$ 2.40 ea	10/$22.60
	7801A	SMA MALE to coax 7801"A" for RG58/U	$ 1.99 ea	10/$17.60
	7801B	SMA MALE to coax 7801"B" for RG174/U	$ 1.99 ea	10/$17.60
	7809A	SMA FEMALE 7809"A" for RG58/U	$ 1.99ea	10/$17.60
	7809B	SMA FEMALE 7809"B" for RG174/U	$ 1.99 ea	10/$17.60
	7839	SMA female to UHF female (SO239), adapter.	$ 2.99 ea	10/$27.60
	7827	SMA male to UHF (PL259) MALE.	$ 2.99 ea	10/$27.60
	7828	SMA male to UHF (SO239) female.	$ 2.99 ea	10/$27.60
	7823	SMA male to TYPE "N" male, adapter.	$ 2.99 ea	10/$27.60
	7829	SMA Female to BNC Male.	$ 2.99 ea	10/$27.60
	7819	SMA Male to BNC Male.	$ 2.99 ea	10/$27.60
	7820	SMA male to BNC female. Adapter for handheld antennas to new hand-held radios.	$ 2.99 ea	10/$27.60
	7830	SMA female to BNC female	$ 2.99 ea	10/$27.60
	7821	SMA Male to Mini UHF Male.	$ 2.99 ea	10/$27.60
	7832	SMA Female to Mini UHF Female.	$ 2.99 ea	10/$27.60
	7822	SMA Male to Mini UHF Female.	$ 2.99 ea	10/$27.60
	7610	Mini UHF "male" to Standard (SO239 type) "female."	$ 2.99 ea	10/$27.60
	7304	Fits RG-213, RG-8, etc... The connector for repeater sites and antenna that require type ''N'' fittings.	$ 2.99 ea	10/$27.60
	7312	Fits RG-213, RG-8, etc. The connector for repeater sites and antenna that require type ''N'' fittings.	$ 2.99 ea	10/$27.60
	7321	N Male to N Male	$ 2.99 ea	10/$27.60
	7323	N - FEMALE to N - FEMALE "N Double-Female"	$ 2.99 ea	10/$27.60
	7330	N Male to UHF FEMALE "Adapter"	$2.99 ea	10/$27.60
	7521	N Female to UHF MALE "Adapter"	$ 2.99 ea	10/$27.60
	7337	Right Angle, Type N Male to N Female	$ 3.99 ea	10/$36.90
	7339	Type N TEE, "N" Male to double "N" Female	$ 4.99 ea	10/$45.60
	7401B	TNC MALE Crimp Type for RG-59/U coax	$ 1.99 ea	10/$17.60
	7416B	TNC female RF connector. Four hole panel mount is attached using 4 screws. RG-59 coax may be crimp attached before mounting.	$ 2.99 ea	10/$27.60
	7516	Remember the axiom; 'An ounce of prevention is worth a pound of cure.' This lightning protector contains a modified spark gap that provides that ounce of prevention. . Remember, there is no substitute for a good earth ground, AC line surge, and spike protection. Where lightning is involved, we make no warranties. We offer the 7516 as a secondary lightning protector. Ground wire attached to wire lug.	$ 4.99 ea	10/$42.60
	SM1L	Right Angle SM1L Mount Right angle stud mount with SO239 coaxial cable connector and a 3/8-24 threaded antenna socket. Great for those cramped areas. Reg ~~11.95~~, BUX COMM Price: $8.88	$ 8.88 ea	10/$79.60

Our Most Popular, "TNC to Radio Packet Interface Cables" Back To Top

Please note, interface cables in this section are our most popular movers →, and listed in no particular order, so please read each line-item carefully. CHECK THIS PAGE OFTEN, AS WE ARE ADDING NEW CABLES WEEKLY !

Alinco, ADI, & Kenwood transceivers with 8 pin screw-on mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port. 14.97 Model KVAK8MX

Alinco, ADI, & Kenwood transceivers with 8 pin screw-on mic and 3.5mm external speaker jack, to MFJ & PacComm TNCees. 14.97 Model 5DAK8MX

Alinco, DR 605 transceiver with 2.5mm and 3.5mm 9K6 jacks, to MFJ 1270CQ 9600, AEA PK-96, and PacComm 9k6 TNCees 19.97 Model 5DR605

Alinco, DR 605 transceiver with 2.5mm and 3.5mm 9K6 jacks, to Kantronic KPC-9612 Dsub 15 pin 9600 b/s port. 19.97 Model K9612605

Alinco, transceivers with RJ 45, modular mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port. 14.97 Model KV98AL45

ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O, to KANTRONICS KPC, and KAM Dsub 9. 14.97 Model KVMDIN
←BUX NOTE: Throughout our pages, you'll see references to the 6 pin Mini DIN. This is the latest attempt by the ISO 9002 committee, to establish a "standard" for 1200 and 9600 baud I/O with PTT. If your radio has this jack as an I/O, it is the port to use, as it permits having your microphone connected while operating the digital modes. Thus you have real-time use of the digital modes and voice operation.

ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O, Data I/O, to MFJ and TNCees with 5 pin DIN I/O.
14.97 Model 5DMDIN

Azden transceivers with 8 pin screw-on mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port. 14.97 Model KVAZ8MX

Azden transceivers with 8 pin screw-on mic and 3.5mm external speaker jack,to MFJ, PacComm, & Some AEA TNCees. 14.97 Model 5DAZ8MX

Icom transceivers with 8 pin screw-on mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port. 14.97 Model KVIC8MX

Icom transceivers with 8 pin screw-on mic and 3.5mm external speaker jack, to MFJ, PacComm, & Some AEA TNCees. 14.97 Model 5DIC8MX

Icom transceivers with 4 pin screw-on mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port. 14.97 Model KVIC4MX

Icom transceivers with 4 pin screw-on mic and 3.5mm external speaker jack, to MFJ, PacComm, and TNCees with 5 pin DIN I/O port 14.97 Model 5DIC4MX

Icom, transceivers with RJ 45, modular mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port. 14.97 Model KV98IC45

Icom, (W32..etc), Yaesu, & Radio Shack HT's (not all) to KAM, KAM+, KAM98 Dsub 9 pin & KPC3 VHF port. 14.97 Model KV024

Kenwood transceivers with 8 pin screw-on mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port. 14.97 Model KVAK8MX

Kenwood transceivers with 5 pin screw-on mic and 3.5mm external speaker jack, to Kantronics 9 pin Dsub VHF port. 14.97 Model KVKW5MX

Kenwood transceivers with 5 pin screw-on mic and 3.5mm external speaker jack, to MFJ & PacComm 5 pin DIN Radio port. 14.97 Model 5DKW5MX

Kenwood transceivers with 4 pin screw-on mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port. 14.97 Model KVKW4MX

Kenwood transceivers with 4 pin screw-on mic and 3.5mm external speaker jack, to MFJ, PacComm, & Some AEA TNCees. 14.97 Model 5DKW4MX

Kenwood, transceivers with RJ 45, modular mic and 3.5mm external speaker jack, to TNC with 5 pin DIN Radio port. 14.97 Model 5DK45

Kenwood, transceivers with RJ 45, modular mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port. 14.97 Model KV98KW45

Radio Shack, transceivers with RJ 45, modular mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port. 14.97 Model KV98RS45

TenTec transceivers with 4 pin screw-on mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port. 14.97 Model KVTT4MX

TenTec transceivers with 4 pin screw-on mic and 3.5mm external speaker jack, to MFJ, PacComm, & Some AEA TNCees. 14.97 Model 5DTT4MX

YAESU transceivers with 8 pin screw-on mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port. 14.97 Model KVY8MX

YAESU transceivers with 8 pin screw-on mic and 3.5mm external speaker jack, to MFJ, PacComm, & Some AEA TNCees. 14.97 Model 5DY8MX

YAESU transceivers with 4 pin screw-on mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port. 14.97 Model KVY4MX

YAESU transceivers with 4 pin screw-on mic and 3.5mm external speaker jack, to MFJ, PacComm, and Some AEA TNCees. 14.97 Model 5DY4MX

YAESU, transceivers with RJ 45, modular mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port. 14.97 Model KV98FT45

YAESU, FT-736, FT-600, FT-890, and Late Model FT-900 transceivers with 3.5mm HF Data I/O HF jack to MFJ, and TNCwith 5 pin DIN I/O 14.97 Model 5DFT600

YAESU, FT-1000Mk V, FT-990, and TenTec transceivers with 5 pin DIN Data I/O jacks
to Kantronics KAM 98/XL Dsub9 HF port. 14.97 Model K98XL5D

This diagram is the adapter used to interface TNCees with a female DB 25 comport to PCees with a 9 pin Dsub Comport. 14.97 Model DB9FDB25M

BACK to TOP

AEA

Mail order form or FAX to 434 525 7818 CLICK HERE!

IMPORTANT NOTE; Prices of cable assemblies shown, do NOT include shipping & handling. All orders are shipped within 24 hours of receiving, via UPS, or Priority mail. Shipping & Handing added to each interface cable order: USA and CANADA=$7.90, Foreign=$11.90

Alinco, DR 605 transceiver with 2.5mm and 3.5mm 9K6 jacks, to MFJ 1270CQ 9600, AEA PK-96, and PacComm 9k6 TNCees 19.97 Model 5DR605

ALINCO DR-110 to PK-232 Radio port 1 or 2
Order A232AL8M 14.97

ALINCO , Kenwood, & ADI 8 pin screw-on mic to AEA PK-232.

Order A232AK8M 14.97

ALINCO , Kenwood, 4 pin screw-on mic to AEA PK-232.
Order A232AK4M 14.97

ALINCO DJ100, DJ-120, DJ-200, & DJ-500 to PK-232 Radio port 1 or 2
Order A232DJ25S 14.97

ALINCO DJ100, DJ-120, DJ-200, & DJ-500 to PK-12, PK-96, PK-900 & PK-2232 w/5 pin DIN I/O jack.
Order 5DJ25S 14.97

ALINCO DR-135 to AEA PK-96, and AEA PK-900 WIRED FOR 9600 bauds Operation!
Order PK96AL135 $19.95

ALINCO DR-135 to AEA PK-96, and AEA PK-900 WIRED FOR 1200 bauds Operation!
Order 5DR135 $19.95

ALINCO DJ-F1 and transceivers with similar I/O, to AEA PK-232
Order 022A 14.97

ALINCO ADI, and transceivers with similar Mic I/O AEA (PK900, PK96, PK 12) 5 pin DIN
Order 5DAL6A 14.97 Note that receive audio must be available at pin 6 of the 8 pin mic jack.

ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O, to AEA PK-96 & 900
5D9KMDIN $19.95

ICOM 8 pin screw-on MIC & 3.5mm Ext Spkr jack, to AEA PK-232
A232IC8M 14.97

ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O, to AEA PK-96, PK-900, DSP-2232
5DMDIN 14.97

ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O, to AEA PK-232
A232MDIN 14.97

ICOM 4 pin screw-on MIC & 3.5mm Ext Spkr jack, to AEA PK-232
A232IC4M 14.97

ICOM 706 and Icoms with 13 pin DIN Data I/O to AEA PK232PK232-MBX
Order A232IC13 14.97

ICOM SPECIAL Dual I/O cable, AEA PK232 RADIO and FSK jacks to Icom 13 pin DIN ACCY w/FSK pin.
Order A232IC13RY $19.95

ICOM SPECIAL Dual I/O cable, AEA PK232 RADIO and FSK jacks to Icom 8 pin DIN ACCY w/FSK pin.
Order A232RYIC8D $19.95 IC 746, IC 756, and PRO, Pro II..etc.

ICOM 746 & 756 etc with 8 pin DIN ACC(1) & 7 pin ACC(2) accessory jack(s) to AEA PK232
For ICOM 746 "VHF" Operation, NOT for HF.
Order A232I746-V $19.95

ICOM 746, 756 and Pro, 8 pin DIN ACC-1 for HF PTT to AEA PK900, PK-96, PK-12 5 pin DIN
Order A232I8D-H $19.95

ICOM 8 pin DIN accessory jack (HF) to AEA PK232
Order A232I8D 14.97

ICOM 2100, IC 706, etc and Icom transceivers with RJ 45 Mic I/O to AEA PK232
Order A232I2100 14.97

ICOM 706 and Icom with 13 pin DIN Data I/O to SCS PTC IIe, MFJ, & AEA PK-900, PK-12, PK-96
Order 5DIC13 14.97

ICOM RJ45 to AEA PK-232 (for Icom with Rx audio at RJ-45 pin 3).
Order A232IC45 14.97

ICOM transceivers with 8 pin accessory I/O to AEA 5 pin SIL connector.

Order A232IC8D 14.97

ICOM transceivers with 8 pin DIN accessory jack to PK-900, PK-2232, PK-96 & PK-12
Order 5DIC8D 14.97

ICOM , 746 and similar radios with 8 pin DIN ACC(1) and 7 pin DIN ACC(2) AEA PK-96 & 900
Order 5D746-V $19.95 For VHF operation of ICOM 746, 756 etc.

ICOM, HT's to PK12, PK96, PK900, DSP-232, MFJ, & PacComm
Order 5D024 $19.95

ICOM transceivers with RJ45 mic jack to AEA PK-96, PK-900, DSP-2232
Order 5DIC2100 14.97

ICOM transceivers with 8 pin mics with receive AF at pin 8 AEA PK-232
Order IC8AF 14.97

ICOM RJ45 to TNCs with 5 pin DIN Radio Ports, MFJ, SCS, PacComm, & some AEA
Order 5DIC45 14.97

ICOM (W32..etc), Yaesu, & Radio Shack HT's to AEA PK-232
Order A232HT 14.97

KENWOOD (late model) TS-450, 950, 2000, etc. w/13 pin DIN to AEA PK-900, PK96, PK12
Order 5DKW13 14.97 NOT for early models #40s, 440, etc; If 440, 940 etc, specify

Kenwood, transceivers with RJ 45, modular mic and 3.5mm external speaker jack, to AEA PK-900, PK96, PK12, MFJ and PacComm 5 pin DIN Radio ports. 14.97 Model 5DK45

KENWOOD late model transceivers w/13 pin DIN, TS-450, 950, 2000, etc to AEA PK-232

Order A232KW13 14.97 NOT for early models #40s, 440, etc; If 440, 940 etc, specify

KENWOOD SPECIAL Dual I/O cable, AEA PK232 RADIO and FSK jack KENWOOD 13 pin DIN w/FSK pin.
Order A232KW13RY $19.95 NOT for early models #40s, 440, etc; If 440, 940 etc,

KENWOOD SPECIAL Dual I/O cable, AEA PK900 RADIO and FSK jacks to KENWOOD 13 pin DIN with FSK pin.
Order 5DA900RY $19.95 NOT for early models #40s, 440, etc; If 440, 940 etc,

KENWOOD early Kenwood TS 940, 440 etc 13 pin DIN ACC2 jack to AEA PK900, MFJ & PacComm
Order 5PDKW4013 $19.95

KENWOOD early model transceivers with 13 pin DIN accessory jack, TS-440, 940 etc. AEA PK-232

Order A232K4013 $19.95

KENWOOD , Alinco, ADI, and SGS 2020 & 3.5mm Ext Spkr jack, to AEA PK-232
Order A232KW8M 14.97

KENWOOD 4 pin mic IN and 3.5mm Ext Spkr to AEA PK-900, PK-12, PK-96, & MFJ
Order 5DKW4M 14.97

KENWOOD , Alinco, ADI, and SGS 2020 & Ext Spkr jack, to AEA PK-900, PK-12, PK-96
Order 5DAK8MX 14.97

KENWOOD , RJ 45 MIC & 3.5mm Spkr to AEA PK-232.
Order A232K45M 14.97

KENWOOD , Alinco, ADI, SGS2020 and transceivers with similar I/O to AEA with 5 pin DIN I/O.

Order 5DKW8M 14.97

KENWOOD transceivers with 6 pin, screw-on mic jack to PK232
Order A232KW6 14.97

KDK 4 pin mic IN and 3.5mm Ext Spkr to AEA PK-900, PK-12, PK-96, & MFJ
Order 5DKDK4M 14.97

Radio Shack HTX252 to PK-232 Radio port 1 or 2
Order A232RS252 14.97

Radio Shack with (HTX 212 & 242) RJ45 Mic & 3.5mm Ext Spkr jack to AEA PK-900, PK-12, PK-96
Order 5DRS45 $16.95

Radio Shack HT's to PK12, PK96, PK900, DSP-232, MFJ, & PacComm
Order 5D024 14.97

Radio Shack with RJ45 Mic to AEA PK-900, PK-12, PK96 and TNC w/5 pin DIN port.
Order 5DRS45 14.97

TenTEC transceivers with 5 pin DIN data I/O to AEA PK-232
Order 5D5SIL 14.97

TenTEC Pegasus & Jupiter to PK12, PK96, PK900, DSP-232
Order 5DTT5D 14.97

TenTEC ORION AUX I/O to AEA PK-232 and PK232MBX.
Order A232TTORION $19.95

TenTEC ORION AUX I/O to AEA PK-900, PK-12, PK96 and TNC w/5 pin DIN port.
Order 5DTTORION $19.95

YAESU 8 pin screw-on mic to AEA PK-232
Order A232Y8M 14.97

YAESU 4 pin screw-on mic to AEA PK-232
Order A232Y4M 14.97

YAESU FT-736, FT600, FT-890 and YAESU transceivers with similar Data and PTT jacks to AEA PK232
Order A232Y736 14.97

YAESU FT-2400, 2500 etc with RJ45 Mic to AEA PK-900, PK-12, PK96 and TNC w/5 pin DIN port.
Order 5DY45 14.97

YAESU FT-2400, 2500 etc with RJ45 Mic to AEA PK-232, 5 pin inline jacks.
Order A232Y45 14.97

YAESU FT-757 & FT-767 RCA accessory jacks to AEA PK232/MBX
Order A23275767 14.97

YAESU FT-50, FT-40, FT-10, VX-1, VX-5 and similar HandHelds to PK232
Order A232YVX 14.97

YAESU FT-50, FT-40, FT-10, VX-1, VX-5, VX-150 and similar HandHelds to PK12, PK96, PK900
Order 5DYVX 14.97

YAESU , Icom, HT's to PK12, PK96, PK900, DSP-232, MFJ, & PacComm
Order 5D024 14.97

YAESU FT-990, FT-1000, TenTec Pegasus & Jupiter to PK12, PK96, PK900, DSP-232, to
Order 100 14.97

YAESU FT-847 "HF" Data I/O jack to AEA PK232, RAD port 1 or 2.
Order A232HF847 $19.95

YAESU FT-847 "HF" Data I/O jack. (see also MFJ-1278) to PK12, PK96, PK900, DSP-232
Order 5D847HF $19.95

YAESU transceivers with 5 pin DIN data I/O to AEA PK-232
Order 5D5SIL 14.97

YAESU FT-2600 Data I/O to AEA PK-232 RADio port 1 or 2
Order A232Y2600 $19.95

YAESU FT-2600 Data I/O to AEA PK-900, PK-12, PK-96
Order 5DFT2600 $19.95

YAESU CPU2500 R mic IN and 3.5mm Ext Spkr, to AEA PK-900, PK-12, PK-96, & MFJ
Order 5DCPU2500R $19.95

YAESU FT-2800M RJ12 mic IN and 3.5mm Ext Spkr to AEA PK-900, PK-12, PK-96, & MFJ
Order 5DFT2800M $19.95

YAESU transceivers with 8 pin mic jack to AEA PK-96, PK-900, DSP-2232
Order 5DY8M 14.97

YAESU FT-600, FT-736, & FT-890 and similar Yaesu Data I/O AEA with 5 pin DIN ports.
Order 5DFT890 14.97

YAESU transceivers with 8 pin screw-on microphone, to AEA PK-232
Order A232Y8MX 14.97

YAESU FT-757 and transceivers with similar I/O to AEA PK-96, PK-900, PK-2232
Order 5D757 14.97

AEA PK-87 to Radio Shack transceivers with RJ45 Mic and receive AF at 3.5mm Ext Spkr jack.
Order A87RS45 $16.95

AEA PK-88 to ALINCO transceivers with receive AF at mic connector, pin 6.
Order A88AL6A $19.95

AEA PK-88 to ALINCO transceivers with 8 pin MIC and receive AF at 3.5mm Ext Spkr Jack.
Order A88A8M $19.95

AEA PK-88 to Icom transceivers with receive AF at mic connector pin 8.
Order A88I8M $19.95

AEA PK-88 to KENWOOD 8 pin Mic w/Ext Spkr AF
Order A88KW8M $19.95

AEA PK-88 to Vertex Standard (YAESU) VX-1, VX-5, VX-150, FT-50, FT-40, FT-10, and similar HandHelds
Order A88YVX $19.95

AEA PK-88 to Radio Shack RJ45 modular Mic & 3.5mm Ext Spkr Audio
Order A88RS45 $19.95

AEA PK-88 to YAESU transceivers with 8 pin screw-on microphone.
Order A88YA8M $19.95

AEA PK-88 to YAESU FT-2400 & FT-2500 transceivers with RJ 45 Microphone jacks.
Order A88Y242500 $19.95

AEA PK-88 to ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O,
Order A88MDIN $19.95

AEA PK-88 to TenTec, YAESU, and transceivers with 5 pin DIN I/O
Order A88100 $19.95

AEA PK232 port 1 & 2, to Index Laboratories QRP+ transceiver with 3.5mm microphone jack, and 3.5mm AF Out connector

Order A232NDXLAB $19.95
BACK to TOP

NOTICE
If you are unable to access the "PDG" SHOPPING CART on these pages, "CLICK-HERE" and GO TO: www.JAcomm.com

Phone Orders: 10:00 AM to 4:00 PM Eastern time, Monday thru Friday, Except HOLIDAYS.)
Orders Only ! 434-534-8873 ALL ORDERS SHIPPED SAME DAY RECEIVED, except sunday and holidays.

When placing phone orders, have list of model numbers, descriptions, and credit card, (VISA, Discover, or MasterCard) information ready. (Helps us ship your order same day) Please use correct "Ship-To" Address, ZIPcode, Callsign, and Phone number* (*UPS required). The Radio to TNC interface cables shown on this page, are in stock, and represent more than 800 Radio transceiver models. Orders are shipped within 24 hours of receipt. Shipping & Handing added to each interface cable order: USA and CANADA=$7.90, Foreign=$11.90 NOTE:

Mail order form or FAX CLICK HERE! Back To Top

KANTRONICS
KAM, KAM+, KAM98, KAMxl, KPC3, KPC3+, & KPC-9612
Mail order form or FAX CLICK HERE!

IMPORTANT NOTE; Prices of cable assemblies shown, do NOT include shipping & handling. All orders are shipped within 24 hours of receiving, via
U S P S PRIORITY MAIL, or UPS. Shipping & Handing added to each interface cable order: USA and CANADA=$7.90, Foreign=$11.90

Our most popular seller is the KVMDIN. This interface cable connects the KAM VHF, KPC 1200 baud, and the TinyTRAK, to ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O,.

Order KVMDIN 14.97 =

ICOM transceivers with 8 pin DIN Data I/O jack to KAM or KPC 1200 baud (VHF) port.

Order KVIC8D 14.97 =

ICOM Late Model 781, 746, 756, transceiver 8 pin DIN Data I/O accessory jack with FSK/RTTY option/pin to KAM (8 pin DIN) HF port.

Order KHIC8DRY 19.95 =

ICOM 13 pin DIN, accessory jack Interface for KAM or KPC 1200 b/s (VHF port)
NOTICE:This interface cable is for IC 706 Mk II G and IC 718 VHF / UHF operation.

Order KVIC13-VU $19.95 =

ICOM 13 pin DIN, accessory jack Interface for KAM, KPC, and TinyTRAK 1200 b/s (read carefully)

NOTICE:This interface cable is for IC 706 Mk II G and IC 718 HF operation.

Order KVIC13-HF $19.95 =

Kenwood TS-850 and similar Kenwoods with 13 pin DIN, acc2 jack and RCA (phono) FSK/RTTY jack.
Order KHK13R850 $19.95

Kenwood with 13 pin DIN, accessory jack to KAM or KPC 1200 b/s (VHF port) Dsub 9.

Order KVKW13 19.97 =

Kenwood with 13 pin DIN, accessory jack to KAM 8 pin DIN HF port .
Order KHKW13 19.97 =

Kenwood with 13 pin DIN, acc2 jack with FSK pin to KAM 8 pin DIN HF port .

Order KHKW13RY $19.95 =

Kenwood "EARLY MODELS" with 13 pin DIN, accessory jack to KAM 8 pin DIN HF port to KW 440/940 .

Order KHKW4013 $19.95 =

Kenwood with 13 pin DIN, accessory jack to KAM 8 pin DIN HF port .

Order KH8KW13 $19.95 =

YAESU 4 pin DIN, FSK (RTTY) jack to RTTY/FSK I/O KAM 8 pin DIN HF port (RTTY ONLY)

Order KH8FT4RY $19.95 =

YAESU, 8 pin screw-on mic to Kantronic 1200 baud port.

Order KVY8M 14.97 =

ALINCO HT's toKAM & KPC3 VHF port.

Order 028KV 14.97 =

ALINCO transceivers with 8 pin screw-on mic & 3.5mm Ext Spkr jack to KAM /KAM+ HF port.

Order 086KH 14.97 =

ALINCO transceivers with 8 pin screw-on mic & 3.5mm Ext Spkr jack to KAM KPC3 VHF port.
Order 086KV 14.97 =

ALINCO DX-70 HF transceiver and Kenwood with 8 pin mic jack, and 3.5mm Ext Spkr jack to KAM/KAM+ 8 pin DIN HF port.

Order KAMDX70 14.97 =

ALINCO 8 pin microphone I/O except ALINCO DR-110 to Kantronic 1200 baud port.

Order KVAL6A 14.97 =

ALINCO DR-110, Kenwood, ADI, with 8 pin screw-on mic and 3.5mm Ext Spkr jack.
Order KVAL110 14.97 =

ALINCO DJ100, DJ-120, DJ-200, & DJ-500 to KAM, KPC, & TinyTrak TNCees with DB9 I/O jacks.
Order KVDJ25S $16.95

ALINCO DR-135 to Kantronics 1200 baud port.

Order KVAL135 $19.95 =

Alinco, RJ45 Kantronic 1200 baud port.
Order KVAL45 14.97 =

Alinco, Kenwood, ADI, 8 pin screw-on mic to Kantronic 1200 baud port. ALSO interfaces KPC2
(late model) with DE9 Radio port to 8 pin ALINCO etc.

Order KVKW8M 14.97 =

AZDEN 8 pin Mic to Kantronics 1200 baud port.

Order KVAZ8M 14.97 =

Icom, Yaesu, & Radio Shack HT's (not all) to KAM & KPC3 VHF port. Insure that your radio is compatible with this cable. NOTE: PTT strapping option inside the KPC must be set for HT PTT.
Order KV2535 14.97 =

Icom transceivers with 8 pin screw-on mic & 3.5mm Ext Spkr jack to KAM /KAM+ HF port.

Order IC8MXKH $19.95 =

Icom transceivers with 8 pin screw-on mic & 3.5mm Ext Spkr jack, to KAM /KAM+, KPC3 VHF port.

Order KVIC8MX 14.97 =

Icom transceivers with 8 pin mic jack with Rx AF at pin 8 to Kantronics 1200 baud port.

Order KVIC8AF $19.95 =

Icom 706 transceiver with 13 pin accessory jack to Kantronics KAM 98, DE9 port.
Note; PTT line is set for HF operation of the Icom 706 (pin 3).

Order KH70613 14.97 =

Icom 706 transceiver with 13 pin accessory jack to Kantronics 1200 baud port.
Note; PTT line is set for VHF operation of the Icom 706 (pin 7).

Order KV70613 14.97 =

Icom, 8 pin screw-on mic to Kantronic 1200 baud port.

Order KVIC8M 14.97 =

ICOM 8 pin DIN ACCY jack to Kantronics KAM, KAM+, KPC3, & KPC-9612 1200 baud port.

Order KVIC8D, 14.97 =

Icom 8 pin DIN accessory jack to KAM & KAM plus 8 pin DIN HF port.

Order KH8DIC8D 14.97 =

Icom 13 pin DIN accessory jack to KAM & KAM Plus HF port.

Order KH8DIC13 $19.95 =

Icom 8 pin DIN ACC-1 (HF use). NOT for VHF ! KAM HF port to

Order KHIC8D, $19.95 =

Icom RJ45 (IC2100, 706, 8000) with receive AF at 3.5mm Ext Spkr, to Kantronic VHF Radio port.

Order KVIC45 14.97 =

Icom (W32..etc), Yaesu, & Radio Shack HT's (not all) to KAM & KPC3 VHF port.

Order KV024 14.97 =

Icom 746 and similar radios with 8 pin DIN ACC(1) and 7 pin DIN ACC(2) to Kantronic VHF jack.

For VHF operation of ICOM 746, 756 etc.
Order KV746V 19.97 =

Icom 13 pin DIN accessory jack to KAM Plus & KAM vhf port (VHF)

Order KVIC13 14.97 =

ICOM 706, 718, and 2000 RJ45 MIC jack with Receive audio at pin 3, to Kantronic 1200 b/s port.

Order KV70645 14.97 =

KDK 4 pin mic jack to Kantronics KPC-3

Order KVKDK4M, 14.97 =

Kenwood RJ45 microphone jack to Kantronic 1200 baud port
Order KVKW45 14.97 =

Kenwood 13 pin DIN to KAM, KAM+, HF (8 pin DIN) port. NOT for early 440 & 940, See KHKW4013

Order KHKW13 $19.95 =

KENWOOD Early Model (440 and 940) with 13 pin DIN accessory jack. 13 pin DIN uses pin 13 as PTT and pin 9 as MIC Mute to KAM, KAM+, (8 pin DIN) HF port.
Order KHKW4013 $19.95 =

Kenwood TS-2000 13 pin DIN, NOTE ! that "receive audio" is extracted from SUB receiver pin 1, to KAM, KAM+, & KPC3 VHF port.

Order KVKW13SR $19.95 =

ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O,

Order KVMDIN 14.97 =

Kenwood, Yaesu, Icom, & Radios with 6 pin Mini DIN data jacks to KPC-9612, 9600 port.
Order KN96MDIN $19.95 =

Kenwood 6 pin screw-on mic jack to KANTRONICS KAM, KAM+, KPC-9612, & KPC3, 1200 baud port.
Order KVKW6M, 14.97 =

Kenwood 13 pin DIN ACC2, with FSK option added to KAM & KAM+ 8 pin DIN HF port.

Order KH8DKW13, $19.95 =
NOT for early models #40s, 440, etc; If 440, 940 etc, specify

Kenwood HT's. (Except 2500) to KAM & KPC3 VHF port.

Order 026KV 14.97 =

MFJ DataRadio 5 pin DIN Jack to KPC9612, 9600 b/s port,

Order 100K96 $19.95 =

MIDLAND 4 pin microphone I/O to Kantronic KPC-3 & KAM vhf port.

Order KVMID4P, 14.97 =

Radio Shack HTX 252 Mic & 3.5mm Ext Spkr jack to Kantronics 1200 baud port.

Order KVRS252 14.97 =

Radio Shack HTX 212, & 242 w/ RJ45 Mic & 3.5mm Ext Spkr jack to Kantronics 1200 baud port.

Order KVRS45 14.97 =

Standard and ALINCO HT's toKAM & KPC3 VHF port.

Order 028KV 14.97 =

TenTec ORION "AUX I/O" to KAM/KAM+ 8 pin DIN HF port.

Order KHTTORION $19.95 =

TenTec ORION "AUX I/O" to KAM/KAM+ DB9 VHF port .

Order KVORION $19.95 =

TenTec transceivers with 5 pin DIN data I/O to KAM/KAM+ 8 pin DIN HF port.

Order KH8DTT5D $19.95 =

TenTec OMNI, YAESU FT-757 & 767 Patch Jacks to Kantronics KAM 8 pin DIN HF port.

Order KHOMNI, $19.95 =

Alinco, DR 605 transceiver with 2.5mm and 3.5mm 9K6 jacks, to Kantronic KPC-9612 Dsub 15 pin 9600 b/s port. 19.97 Model K9612605

YAESU FT-2400, 2500 etc with RJ45 Mic to Kantronics VHF & 1200 baud (DE9) port.
Order KVY45 14.97 =

YAESU FT-2600 to Kantronics 1200 baud port (DB9 KPC/KPC3/KAM etc).

Order KVY2600 14.97 =

YAESU FT-2800M RJ12 mic IN and 3.5mm Ext Spkr to KANTRONIC VHF radio port .
Order KVY2800M 14.97 =

YAESU FT-847 HF Packet DATA jack to KAM98 and KAMxL Dsub 9 pin DE9 HF.

For FT-847 VHF Packet operation, see KVMDIN.

Order KV847, 19.97 =

YAESU FT-847 HF Packet DATA jack to KAM and KAM+ 8 pin DIN HF port.

For FT-847 VHF Packet operation, see KVMDIN.

Order KHY847HF, 19.97 =

Yaesu 8 pin mic jack to KAM HF port, receive audio is from 3.5mm Ext Spkr jack.

Order 080KH 14.97 =

YAESU transceivers with 8 pin screw-on mic jacks and 3.5mm Ext Spkr jack to KAM VHF port.

Order 080KV 14.97 =

YAESU FT-757 & FT-767 RCA accessory jacks to Kantronic VHF (DE9).

Order KV75767 $19.95 =

YAESU FT-736, FT600, FT-890 and YAESU transceivers with similar Data and PTT jacks to Kantronics KPC3 and KAM VHF (1200 baud) port .
Order KVFT736 $19.95 =

YAESU FT-1000D & FT-1000MP +(990) 5 pin DIN to Kantronics KAM/+ 8 pin DIN HF port.

Order KHY1000, $19.95 =

YAESU FT-50, FT-40, FT-10, VX-1, VX-5 and similar HandHelds to KAM & KPC3 VHF port.

Order KVYVX $19.95 =

ISO standard 6 pin mini DIN data jackto KAM/KAM + 8 pin DIN HF port.

Order KHMDIN 14.97 =

YAESU FT-757 GTX-II to Kantronics KAM 8 pin DIN HF port.

Order KH757 14.97 =

YAESU FT900, FT1000, MFJ 8621, TenTec Pegasus, & Jupiter 5 pin DIN data jack to KAM & KAM+ VHF port.

Order 5DKV 14.97 =

Index Laboratories QRP+ transceiver with 3.5mm microphone jack, and 3.5mm AF Out connector.
to Kantronics VHF port.

Order KVNDXLAB $19.95 =

BACK to TOP

Mail order form or FAX to 434 525 7818 CLICK HERE!

MFJ 1270/1270CQ Turbo/1278/78B PacComm Tiny II /MK II SCS PTC IIe Mail order form or FAX

IMPORTANT NOTE; Prices of cable assemblies shown, do NOT include shipping & handling.
All orders are shipped within 24 hours of receiving, via FED-X Ground, UPS, or Priority mail.

Shipping & Handing added to each interface cable order: USA and CANADA=$7.90, Foreign=$11.90

Alinco, DR 605 transceiver with 2.5mm and 3.5mm 9K6 jacks, to MFJ 1270CQ 9600, AEA PK-96, and PacComm 9k6 TNCees 19.97 Model K9612605

Alinco, Kenwood, & ADI, 8 pin screw-on mic to MFJ/PacComm/SCS, 5 pin DIN port

Order 5DKW8M $14.95 =

ALINCO and Standard Ltd. HTees to MFJ, & PacComm

Order 022 14.97 =

ALINCO DR-110 to MFJ or PacComm TNC with 5 pin DIN

Order A5DA110 14.97 =

ALINCO DJ100, DJ-120, DJ-200, & DJ-500 to MFJ, PacComm, and TNCees w/5 pin DIN I/O jack.
Order 5DJ25S $16.95

ALINCO DR-135 to MFJ-1270B, & C, 1200 baud TNC

Order 5DR135 $19.95 =

ALINCO with RJ45 Mic I/O to MFJ-1270/1278, and PacComm TNC.

ORDER 5DAL45 14.97 =

ADI, ALINCO, SG 2020, 8 pin mic to MFJ TNCees Note that receive audio must be available at pin 6 of the mic jack.

Order 5DAL6A 14.97 =

AZDEN 4000 and similar AZDEN 8 pin mic jacks

ORDER 5DAZ8M 14.97 =

Icom, 8 pin screw-on mic to MFJ/PacComm/SCS, 5 pin DIN port

ORDER 5DIC8M 14.97 =

Icom 746, 756, 8 pin DIN ACC-1 for HF PTT to MFJ & PacComm TNCees with 5 pin DIN 5 pin DIN.
ORDER 5DIC8DH 14.97 =

Icom 746 and similar radios with 8 pin DIN ACC(1) and 7 pin DIN ACC(2) to MFJ 5 pin DIN.

For VHF operation of ICOM 746, 756 etc.
ORDER D746V $19.95 =

ICOM transceivers with 8 pin DIN accessory jack to MFJ, and TNCees with 5 pin DIN I/O.
ORDER 5DIC8D 14.97 =

Icom 8 pin mic with Rx AF at pin 8 to MFJ, PacComm MKII, PK12, PK96, PK900, DSP-232, .

ORDER 5DIC8AF 14.97 =

Icom 207 to MFJ, & PacComm

ORDER 5PDI207 14.97 =

Icom 706 and Icom with 13 pin DIN Data I/O to SCS PTC IIe, MFJ, & AEA PK-900, PK-12, PK-96

ORDER 5DIC13 14.97 =

Icom transceivers with 8 pin DIN accessory ports to MFJ, PacComm, AEA PK900 and AEA PK-12

ORDER 5DIC8D 14.97 =

Icom 8 pin screw-on microphone jacks, and 3.5mm (1/8") Ext Spkr jack

ORDER 5DIC8MX 14.97 =

Index Laboratories QRP+ transceiver with 3.5mm microphone jack, and 3.5mm AF Out connector
ORDER NDXLAB 14.97 =

MFJ TNC to transceivers to; ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O,

ORDER 5D9KMDIN 14.97 =

Kenwood, transceivers with RJ 45, modular mic and 3.5mm external speaker jack, to AEA PK-900, PK96, PK12, MFJ and PacComm 5 pin DIN Radio ports. 14.97 Model 5DK45

Kenwood transceivers with 6 pin screw-on microphone to 5 pin DIN TNC.

ORDER 5DKW6M 14.97 =

MFJ TNC ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O,

ORDER 5DMDIN 14.97 =

KENWOOD TS-450, 950, 2000, etc. 13 pin DIN on late models to MFJ 1270/1278, AEA PK-900, PK96, & PK12 NOT for early models #40s, 440, etc; If 440, 940 etc, specify

ORDER 5DKW13 $19.95 =

Kenwood early TS 940, 440 etc 13 pin DIN jack to MFJ, AEA PK12, PK96, PK900, & PacComm.
ORDER 5DKW4013 $19.95 =

Kenwood, Alinco, ADI, and SGS 2020 to MFJ, 5 pin DIN

ORDER 5DKW8M 14.97 =

Kenwood 4 pin mic IN and 3.5mm Ext Spkr to MFJ, AEA PK-900, PK-12, PK-96.
ORDER 5DKW4M 14.97 =

Kenwood (Most, including TR-2600) HT, (except 2500.) & RadioShack to MFJ, & PacComm

ORDER 5D026 14.97 =

MIDLAND transceivers with 4 pin mic I/O and 3.5mm Ext Spkr jack.

ORDER 5DMID4M 14.97 =

Radio Shack 212, & 242 w/RJ45 Mic to MFJ, PacComm, PK900, PK 12, PK-96 & TNC w/5 pin DIN port.

ORDER 5DRS45 14.97 =

TenTec ORION AUX I/O to MFJ 1278, 1270, 1274, 1276 and TNCees w/5 pin DIN port.
ORDER 5DTTORION $19.95 =

YAESU, FT-1000Mk V, FT-990, and TenTec transceivers with 5 pin DIN Data I/O jacks to Kantronics KAM 98/XL Dsub9 HF port. Model K98XL5D 14.97

YAESU, 8 pin screw-on mic to MFJ/PacComm/SCS, 5 pin DIN port

ORDER 5DY8M 14.97 =

YAESU FT-2400, 2500 etc with RJ45 Mic to MFJ/PacComm/SCS and TNC w/5 pin DIN port.
ORDER 5DY45 14.97 =

YAESU FT-757 & FT-767 RCA accessory jacks to 5 pin DIN TNC.

ORDER 5D75767 14.97 =

YAESU transceivers with 8 pin screw-on mic and 3.5mm Ext Spkr jack.

ORDER 5DY8MX 14.97 =

YAESU FT-990, FT-1000, TenTec Pegasus & Jupiter to PK12, PK96, PK900, DSP-232, MFJ

ORDER 100 14.97 =

YAESU FT-847 "HF" Data I/O jack to MFJ-1278, and similar 5 pin DIN TNC

ORDER 5D847HF 14.97 14.97 =

YAESU FT-600, FT-736, FT-890, & FT900 and similar Data I/O MFJ & PacComm 5 pin DIN ports.

ORDER 5DY890 14.97 =

YAESU FT-50, FT-40, FT-10, VX-1, VX-5 and similar HandHelds to TNC with 5 pin DIN port.

ORDER 5DYVX $19.95 =

YAESU transceivers with 8 pin mic jack to MFJ-1270, 1278, & PacComm.

ORDER 5DY8MX 14.97 =

Yaesu, & Radio Shack HT's to TNC2 & TNC with 5 pin DIN port to most Icom (W32..etc)

ORDER 5D024 14.97 =

YAESU CPU2500 R mic IN and 3.5mm Ext Spkr to MFJ, AEA PK-900, PK-12, PK-96.
ORDER 5DCPU2500R $19.95 =

YAESU FT-2800M RJ12 mic IN and 3.5mm Ext Spkr to MFJ, & AEA PK-900, PK-12, PK-96.
ORDER 5DFT2800M $19.95 =

YAESU 2500R to MFJ, & PacComm Tiny II and AEA PK96 & PK12

ORDER 5DCPU2500 $19.95 =

YAESU, Icom, & Radio Shack HT's to PK12, PK96, PK900, DSP-232, MFJ, & PacComm.

ORDER 5D024 14.97 =

REGENCY HR-2 (A&B) to MFJ, PacComm, TNC2, AEA PK-900, PK-12, and PK-96.
ORDER 5DHR2 14.97

PacComm, Pico-Packet Back To Top

Icom Transceivers with receive audio at pin 8 of the mic jack to PacComm "PicoPacket" TNC
ORDER PICOI8M 17.95

Icom Transceivers with RJ45 microphone jack to PacComm "PicoPacket" TNC

ORDER PICOIC45X 17.95

ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O, (ISO standard) to PacComm "PicoPacket" TNC

ORDER PICOMDIN 17.95

BACK to TOP

SPECIAL BUILD, INTERFACE CABLES Back To Top

These "special built" cables are built and shipped, same day, if order is received by 2:00 PM EST

This cable interfaces the AEA DSP-2232 Radio Port 1 (standard DIN 5 pin male plug end) with the two 6 pin Mini DIN data ports on the Icom IC-910H (Main & Sub-Band data ports) - the two 6 pin Mini DIN male plug ends. This enables RX data on radio downlink "M" port and TX on uplink "S" port for satellite operations.
ORDER K7EG $27.97

This cable interfaces the IC207 and IC 208 for remote mic to 6 pin Mini DIN male plug end to the 6 pin Mini DIN data ports on the Icom IC-207/208 This enables Tx & Rx with a headset with 2.5 mm and 3.5mm plug.
ORDER RMIC208 $29.97

YAESU, 209, 709, & 727... to Heath HK-21 "Pocket Packet".

ORDER HK21FTHT $17.95

Icom, & Radio Shack HT's to Heath HK-21 "Pocket Packet".

ORDER HK21ICHT $17.95 BACK to TOP

We can build these interface cables for most all transceivers. eMail Buck with your inquiry.

TheNET (X1J4 Rev 5) EPROM for TNC2, MFJ, & PacComm Node/TNC;
CLICK HERE for order form;

Our Lil Lite that we include with each RASCAL GLX. Additional lil lites are available at 99 cents each. Batteries are included. Perfect solution for finding the correct comport, or accessory jack on the dark sides of your PC or back of your transceiver. Also doubles as a sturdy "key-ring." LILITE LILITE

VHF-UHF DOUBLE FEMALE BULKHEAD (feed-thru) CONNECTORS              Back To Top


YES, we have "one" 1 inch long                     For bulkhead and through-the-wall UHF connector feed-thru connections, with nuts.:

Order 7518-1 (One inch )        ^$ 1.79 ea.              10 for ^$15.50
Order 7518-2 (Two inches)       ^$ 2.95 ea.             10 for ^$ 24.50

Order 7518-3 (Three inches)    ^$ 3.69 ea.             10 for ^$ 32.50
Order 7518-4 (Four inches)      ^$ 3.95 ea.             10 for ^$ 34.50
Order 7518-6 (Six inches)          ^$ 4.95 ea.             10 for ^$ 44.50
Order 7518-8 (Eight inches)    ^$ 8.95 ea.              10 for ^$ 82.50
Order 7518-10 (Ten inches)      ^$ 10.95ea.            10 for ^$ 99.50
Order 7518-12 (Twelve inches) ^$12.95ea.             10 for ^$ 114.50



               Heavy Duty 1" Nuts for the above bulkhead connectors.
2/.99 cents    HDM1-NUT        10 for $ 3.99

50 Ohm impedance, 3 ft, 6 ft, 9 ft, 12 ft, & 18 feet.
These jumpers are made from high quality, low-loss, coax cable with PL-259 connectors installed at each end.
Three ft. (3') ORDER No.      8X3-PLPL $3.99
Six ft. (6')         ORDER No.      8X6-PLPL $4.99
Nine ft. (9')      ORDER No.      8X9-PLPL $5.99
Twelve ft. (12') ORDER No. 8X12-PLPL $7.99
Eighteen ft. (18')ORDER No. 8X18-PLPL $8.99

Need a High Quality jumper from your transceiver to the linear?

A HiQuality coax jumper for that transceiver Output to linear input!

The connectors are Amphenol� and coax is RG-8X by Belden.

Hi Quality, Six ft. (9') jumper made using high quality components.

$6.97 ORDER No. HIQ9JMPR

Our Lil Lite that we include with each RASCAL GLX.

Additional lil lites are available at 99 cents each. YES, Batteries are included. Perfect solution for finding the correct comport, or accessory jack on the dark sides of your PC or back of your transceiver. Also doubles as a sturdy "key-ring." LILITE LILITE

Antennas, Baluns, and Accessories for Mobile and Base Stations

Back To Top

A top quality, Dual Band Magnet Mount Antenna,
priced less than 20 dollars... For 2 meters and 70 cm. This Dual-Band antenna usually cost twice as much, We bought a truck load, and we are passing the savings to you. 144/440 magnet mount antenna for Amateur use. This dual band mobile antenna is styled in the
"cellular" look for use on both 2 meters and 440 MHz.

* 1/4 wave on 2 meters
* 2.5 dBi gain at 440 MHz.
* Rated at 200 Watts
* 12 ft of RG-58 cable with *PL-259 connector.
* Magnet mount designed for winds of 100 mph
* Overall height is 21 inches.

With PL-259*connector attached;
$ 17.95 each VU-1510
_________________________________________________
Same as above, but has *BNC connector attached ↓
$18.95 each ORDER VU-1510-B

5/8 wave antenna
136 - 174 MHz

. NMO Base (Mount not included)

� 39 inches overall

� VSWR less than 1.5:1

� 150 Watts

130 - 174 MHz

VH-1215 $16.95

__________________

220-265 MHz version PM220

$21.95

UV-325 VHF/UHF (dual-band) mobile antenna:

VHF 144~148 MHz, 3 dB gain
UHF 440~450 MHz, 5 dB gain
VHF/UHF dual band mobile communication antenna
Unique design, durable construction
NMO connection

UV325 $17.95

Recommended Mag Mount is AM-1045 B, NMO Mounts shown below.

SAVE.. Get both, the UV325 (ABOVE) VHF/UHF
(NMO) Antenna & the AM-1045B, 5 inch, Super Heavy-Duty Magnet Mount for $29.99

Order 325-1045 $29.95

VH-1215

VHF mobile communication antenna 130MHz to 174MHz, 3dBVHF mobile communication antenna
Unique design, durable construction NMO connection, with cutting chart VH-1215

16.95

5 Inch $17.95

AM-1045B

     Thru-Glass Antennas

VHF & UHF Dual Band model   VUG270 $ 27.⁹⁷

Single band, VHF only   VUG144 $ 22.⁹⁷

When you hear those strong HF mobile signals, here's one reason they stand out from the rest.
By installing the BUX MoBalun near the input to your antenna, you deliver more RF energy to the antenna. At the same time, the BUX MoBalun prevents RF from traveling back along the shield (high SWR) of your coax. High power rating, Low-permeability toroid, with Internal composition fiber-glass to prevent vibration during mobile operation. For input and output connectors, we use only the best Silver plated, Teflon insulated, SO239 connectors. 500 watts. Our MoBALUN is also ideal for marine antenna installations. $19.95 MOBALUN

3 inch, NMO Magnetic antenna mount. Black finish,
and a good "grabber" to a smooth, flat, metal surface. A good companion mount for the DB-2 shown below.

←3.5 Inch, $14.95 AM-1043B

Larger, 5 inch heavy duty Magnet, w/coax and connector. 5 inch, NMO Magnetic antenna mount. Black finish, and a good "grabber" to a smooth, flat, metal surface. A good companion mount for the UV325 shown near top of this page.
5 Inch $17.95 AM-1045B →

SAVE.. Get both, the VH-1215 (ABOVE) 130-174 MHz (NMO) and the AM-1045B, 5 inch, Super Heavy-Duty Magnet Mount for $27.95

Order 1215-1045 $27.99

DB-2

Dual Band mobie antenna for 144 & 430 MHz

VSWR: Less than, 1.5:1

Connector: NMO base.

Length: 39cm or 15.5 in. approx.

DB2 $14.95

________________________________________

ADD this NMO, 5 inch magnet mount for a durable,
dual-band mobile antenna combo.
Both, DB-2 and 1045B for only: $29.95

DB2-45

See AM-1043, 3 inch, NMO Magnetic Mount above.

Antenna Coax Switch; 1 IN, 3 Out, in Metal case.

Antenna Coax Switch; One IN, Three Out, or Three IN, and One OUT, 50 Ohm impedance,
3 port to 1 port Antenna Switch. Rated at 1 KW, SO-239 ports, mounted in metal case.
CX3 $9.95

REMOUNT KIT for all TG Series (Thru-Glass) Antennas.
Kit contains:
2 - Adhesive Pads
1 - Alcohol Swads
1 - Trim Plate
1 - Shrink Tube
REMNTKIT 4.97

BUX TRUX HD

Great for Apartment Dwellers, RV, pickup truck-bed rail, or Bumper installations Heavy-Duty Antenna Mount. By using our KD-3 Kwik-Disconnect, you can quickly change bands, or make your antenna setup into a "stealth" installation.

This Heavy-Duty bar can be mounted or attached to a pick-up truck-bed post rail, or to the metal bumper. Length of this bar is 12 inches, and width is 2 inches. The bar is almost one quarter inch thick. Mounting screws and 3/8" X 24 standard thread, stud mount are included.

$14.95 order BUXTRUXHD

QUAD MAGNET, Antenna Mount.
Available in; Triple Chrome Plate, or Basic Black.

You asked for "strength" in a super mobile antenna mount, and WE DELIVERED !

Features 4, five inch Heavy-Duty magnets, equally spaced on a Heavy Duty, 1/4" thick, hard-drawn metal frame.

The BUX4MM is prewired with 3/8" X 24 threaded (standard) Mount, and PL259 connector.
Accepts 3/8 X 24 antennas.

$44.⁹⁷ BUX4MMC "chrome"

$44.⁹⁷ BUX4MMB "Black"

Durable, light weight, 5/8 wave, high gain, two meter
mobile antenna. Fits 3/8" x 24 thread base, MA1034 mag
mount shown at right.
←To attach to NMO mount, use NMO6 adapter shown at left.

Includes cutting chart to cover 144 to 174 MHz.

Also fits Heavy-duty, MAG mount MA1035, elsewhere on this page.

←$15.95 VH1210

5/8 wave, GAIN-type, two meter MOBILE antenna.

VH1210 complete with MA1034 MagMount, cable, and connector.
$29.95 VH1210-MA1034

"Super" Magnet 95 lb. pull strength. This powerful
5 inch magnet comes with 17 feet RG 58 coax with PL-259 connector. It has the standard antenna 3/8" X 24 female threads. A strong magnet mount for HAM type mobile antennas. Prewired with 17" RG58 cable PL-259 connector. 5" version MA1035 $14.95 (Wt = 5 Lbs)

3 " version MA1034
BUX Discount PRICE, $12.95 (Wt=4 Lbs)

AM-1043B
3 inch, NMO Magnetic antenna mount. Black finish,
and a good "grabber" to a smooth, flat, metal surface.
A good companion mount for the DB-2 shown near top
of this page.

$14.95 AM-1043B

Same as AM-1043B, except larger, 5 inch heavy-duty Magnet, w/coax and connector.
$17.95 AM-1045B

WINDOW CLIP for HT or SCANNER ANTENNA

* Easy Mount Window Clip, No Holes
*Low Profile Cellular Style
* Includes 8ft Cable and SMA Connector
* SMA CONNECTOR ADAPTOR NOW FITS LATE MODEL HT's
* Molded Weather Proof Connections
* Frequency Coverage 25 MHz to 1.2 GHz

SMA window antenna clip
$10.95 AM 800

BNC window antenna clip
$11.95 AM 801B

(antenna not included) Use antenna presently on your HT

SMA or BNC "HAT" Clip-on Mount

Attach your HT or Scanner "duckie" to your hat, or a high place
that enables greater distance. Attach your handheld (HT) or Scanner duck
antenna to this Clip Mount, connect the cable (SMA or BNC) to the handheld
(or scanner), and then clip the antenna to your hat, coat, bike, etc. Includes 4
ft of RG-174 coax cable terminated in a SMA/BNC female.

SMA Hat Clip
$10.95, AM 550

BNC Hat Clip
$11.95 AM 551

(antenna not included) Use antenna presently on your HT

HR-601VU
VHF & UHF Antenna

Dual-Band, HandHeld antenna, with
SMA male connector for use with late
model transceivers.

12.95 HR-601VU

HR-601V is for VHF only handheld transceivers.

Frequency: 144-148 MHz
VSWR: Less than 1.8:1
Whip is Shape/Memory Alloy
Connector: SMA Male

10.95 HR-601V

BUX COMM Mobile Antenna Tuning Instructions; www. BUX COMM.com Setting the SWR:

Insert your VHF or UHF antenna whip into the antenna ferrule or the adjustable slip at the top of the coil. Using a good SWR meter, calibrate (set it up in the �forward power� position) it near the center of the band the antenna is designed for. Switch back to SWR and record the readings. These readings are made on three frequencies; one at the center of the band, then at the lower end of the band, and at the upper end of the band.

If the lowest SWR reading occurs at the low end of the band, the antenna whip/tip is to long and must be shortened. Loosen the whip/tip set screws and lower the whip 1/4'' into the loading coil, or mast. Tighten the set screw(s) and again read SWR. Repeat until lowest SWR is obtained. If the whip is fully lowered into mast and the SWR is still high, remove the whip from mast. Using a grinder, bolt cutters, or hacksaw remove or cut � inch from the bottom part of the whip. Insert the whip back into the ferrule and again test the SWR. Repeat the above procedure until the SWR is below 1.5:1 for the frequencies covered by the antenna. If the lowest SWR reading occurs at the high end of the band, the antenna whip is to short and must be raised (lengthened). Loosen the mast set screws and raise the whip � inch, tighten set screws and test the SWR again. Repeat the above procedure until the VSWR is below 1.5 of all frequencies within the band you plan to operate.

←Ferrule, with set screw(s)

How low can we go?    Or how low can the SWR be set?

In a �perfect world� we would get the VSWR below 1.1:1, but in a practical installation, a 1.5:1 is considered ideal. Some installations will not achieve a 1.1:1 VSWR because of conditions associated with environment or coaxial cable properties.   The losses associated with a 1.5:1 (using approximately 14 feet of coax) is actually less than one-half of one percent (1/2 of 1%) of your output power, which on a normal 5 watt radio means a loss of .025 watts of power.   In other words, instead of transmitting 5 watts output, you are actually transmitting only 4.975 watts. For that reason, spending the extra time to get below 1.5:1 is a matter of personal preference, particularly if you have a high gain type antenna.

What happens if your SWR is 2.0:1 instead of 1.5:1 or less? Most transceivers in use today have VSWR (viswar) protection circuits that decreases power output when the VSWR goes above 2.0:1. Thus reducing the power out of the final power amplifier. So generally, anything between 1.5:1 and 2.0:1 is acceptable, and useable for solid, and reliable communications.   VSWR readings of 3.0:1 or higher, usually point toward other problems in the system.

Trunk Lip Mount (ABS) with steel lip clamp and dual set-screws. Accepts antennas with standard 3/8" X 24 thread base.
Pre-wired with 17" of RG/58 to BNC Connector. Black rubber paint protector, see photo.

With 17" of RG/58 to BNC Connector. $6.97 TLMBNC
______________________________________

Same as above, we include a PL-259 connector $7.97 TLMPL259
______________________________________

Same as TLMPL259, we include PL 259 and 2 meter whip antenna $9.97 TLM2MTR
______________________________________
Same as TLMPL259, we include PL 259 and Dual-Band VHF/UHF ant. $12.97 TLMDBANT

CX-201
Two position switch enables selection of one of two antennas
with a single radio, or one of 2 radios with a single antenna.
Heavy-Duty, Die cast aluminum housing.
Built to commercial standards.

Specifications:

Frequency Range: Up to, and including 600 MHz
VSWR: Below 1.2:1
Power Rating: 1.5 kW peak 1kW continuous
Impedance: 50 Ohms
Insertion loss: Less than 0.2 dB.
Port Isolation: Better than 50 dB.
Port connectors: SO-239
One IN, Two Out
May be configured Two IN, One Out.

2 Position Coax Switch
CX-201 $19.95

HandHeld "HR-9" Duckie

Frequency: 144 - 148 MHz

SWR: Less than 1.5:1

Connector: BNC Male

Length: 4 inches, or 105/mm

9.95 HR-9

ANTENNA INSULATORS
Weatherproof, (TENYTE) insulators. Perfect for your DIPOLE or Windom antenna.

For the apartment dweller, you can now hang the 20 meter doublet in the attic. I've QSO'd with stations all over the world with the 33 ft dipole in my garage attic. One insulator at the center, and one each end. It's great for other HF WINDOM and single-band dipole antennas. Dielectric strength is comparable to the old ceramic insulators, without susceptibility to cracking or breakage under impact or extreme temperature changes.

Pkg of 1 Insulator 1.10 each

Package of 3, $2.99 / 3

Package of 10, $ 8.99 / 10

Transceiver Power Cables Model CB-8
Our most popular Power Cable/Connector
combo with dual, heavy duty (AGU), in-line fuse
holders and fuses. IN STOCK, Ready to ship !

Kenwood TS-450, 2000 etc, Order CB-8
Icom 706 etc..       =       Order CB-8
ALINCO DX-70     =       Order CB-8
RCI-2970               =        Order CB-8
Various Yaesu & Icom (706 etc) transceivers (verify connector)
~~Regular. 24.95~~ $15.97 Order CB-8

NMO Mount RAIN CAP.
Used to cover the NMO mount when not in use. Comes in basic gloss black. YES, they are in Stock! The NMO cover with built-in "0-Ring" seal.
.99 ea, Order NMO5

ANTENNA ADAPTER
3/8"x24 thread base antenna to NMO Mount

SIDE TOP BOTTOM
When you don't care to drill another hole for that whip, or new antenna,
this heavy-duty adapter mates a 3/8"x24 thread antenna base to an NMO mount.
Also includes "O" ring-to-body, seal to prevent moisture oxidation.

NMO to 3/8x24 Antenna Adapter
NMO-6 $8.95

BOTTOM SIDE TOP
When you don't care to drill another hole for that whip, or new antenna, this heavy-duty adapter mates a SO-239 (PL259 type) antenna base to an NMO mount. Also includes "O" ring-to-body, seal to prevent moisture oxidation.
NMO to SO239 Antenna Adapter
$8.95 NMO-8

Trunk Lip, NMO Mount, model AM-209
is a trunk-lip mount supplied with 14 ft of
RG-58 cable, a PL-259, and the industry
standard NMO mount.

The AM-209 mounts on a standard trunk-lip

and comes with 14ft of cable terminated in a PL-259.

AM-209 $11.95

Special Purchase Sale ! They cut (short)
the RG-58 coax to 11 ft. instead of 12 ft.

144/440 magnet mount antenna for Amateur use.
This is a dual band mobile antenna for both 2 meters and 440 MHz.

* 1/4 wave on 2 meters
* 2.0 dBi gain at 440 MHz.
* Rated at 200 Watts
* 12 ft Eleven feet of RG-58 cable with PL-259 connector.
* Magnet mount is designed for winds of 90 mph

Dual Band, Mobile Magnet Mount
$ 13.97 each DBMMM

This NMO Hole Mount will fit into a 3/8" hole, or use the adapter (included) to adapt it to a 3/4" hole. The BUX CommCo NMOH is supplied with 17 ft of 98% shielded RG-58 cable terminated into a PL-259 UHF connector. Cables are attached at right angles to the mount. Mounts also include a built-in seal around the mounting hole to protect from moisture.

AM-207B $8.95

HOLE PLUGS Drilled the hole in the wrong place? Removed an old base-loaded antenna;
This black rubber plug is inserted into the hole to seal from moisture. It can be painted to blend color.
The profile is about 1/8 inch high when inserted,
Plug for 3/8" hole .99 each
Plug for 1/2" hole .99 each

Plug for 5/8" hole .99 each

Plug for 3/4" hole .99 each

Plug for 7/8" hole .99 each

Plug for 1" hole .99 each

VHF and UHF 'Cross-Needle' High
Performance, SWR & POWER Meter.
For the serious VHF/UHF operator, here is a
140 to 160 MHz & 440 to 480 MHz,
VSWR and POWER meter with; 10 - 100 - 1000 watt scales.

SWR-6 ~~$89.95~~ BUX COMM price $69.95

SWR & WATT METER
100 watt & 10 watt level switch

This is a handy, compact meter for designed for the amateur radio operator for checking transmitter operation, 1.7 to 50 MHz. May also be used as a RF field strength meter and to check QRP power.

SWR-3, $19.95 ea.

DUAL BAND, HIGH GAIN, BASE STATION ANTENNA
6.7 db @ 2 meters, 8.2db 70cm.

High Performance, High Gain, Dual Band, Base Station Antenna

5/8 wave, vertical stacked collinear design

2-5/8 elements on 2mt., 4-5/8 elements on 70cm.

6.7 db @ 2 meters and 8.2 db 70cm.

Superior wideband performance

Heavy duty fiberglass radome

Durable, waterproof joints

Mounting Hardware included

Accepts standard PL-259 connector

200 Watt power rating

Radiating element, 100 inches.

DC ground, enclosed elements reduces terrestrial noise.

Reg ~~$109.95~~ BUX COMM price, $57.97UVS-200
Shipping weight 5 lbs.

VH-2201 VHF BASE STATION Antenna.

Frequency Range:
136-174 MHz

Gain: 4.5dB

VSWR less than 1.5:1

Power Rating:
200 watts

Impedance:
50 Ohms

Stainless Steel Radials

SO-239 Input connector

Radiating element

Length 6 feet.

Built to Commercial standards for base station installations,
and rugged, mountain-top repeater applications. Mounting
hardware and stainless-steel radials included. Ship wt, 5 Lb

$47.97 VH-2201

UH-2401 UHF
BASE STATION Antenna.

Frequency Range:
430-490 MHz

Gain: 6.5dB

Power Rating:
200 watts

Impedance:
50 Ohms

Stainless Steel Radials

SO-239 Input connector

Radiating element
length 5 feet.

Built to Commercial standards for base station
installations, and rugged, mountain-top repeater applications. Mounting hardware and stainless-steel radials included. Ship wt, 5 Lb

$47.97 UH-2401

HIGH GAIN, BASE STATION ANTENNA
6.3 db, 136 MHz - 174 MHz.

VHF 136-174 MHz

6dB Gain

5/8 over 5/8 Wave vertical stacked collinear design

Radiating element, over 100 inches vertical length

2, -5/8 wavelength elements on 2 meters

No cutting, Loosen lock-ring and set according to slide chart.

6.3 db @ 2 meters

5 MHz wideband performance

Heavy duty, Stainless Steel Radials

Three section, Hard-drawn aluminum radiator

Durable, waterproof joints

Mounting Hardware included

Accepts standard PL-259 connector

200 Watt power rating
Reg ~~$89.95~~ Shipping weight 5 lbs.

$39.97 BS-150

The Duplexer shown here is the ideal companion for Dual-Band antennas !

HF and VHF/UHF Antenna Duplexer
(Indoor use)
Frequency: (Port 1) 1.3 - 225 MHz, (Port 2) 350 - 540 MHz
Power:       500 W 1.3 - 35 MHz,    300 W 50 - 540 MHz
Insertion Loss: <0.2 dB Isolation: 60 dB;    VSWR: < 1.2:1
Combine HF/6m/2m output (Port 1) and your UHF output
from your transceiver and send to one antenna.
$34.95    Order DU-500

All mounting hardware and assembly instructions are included.
Also includes cutting chart for exact frequency measurements.
"Vertical" Six Meter Ground Plane GP6M $49.95
___________________________________________________________________________________________________
"FiberGlass Vertical" Six Meter Ground Plane
FGP6M $49.95

CAT 5e Patch Cable High quality 10 feet long, Black, with RJ45 connectors molded on to each end. $2.99 each, ORDER CAT5EPC

6 FT DATA CABLE
Dsub Male to Dsub Female is a high quality DB9 male to DB9 female. It fills the requirements of many applications, including giving extra length to that RASCAL comport control cable. It has precision molded connectors, and foil shielding, with 9 wires including ground/drain wire. Turn it around and it's a DB9Female, to DB9 Male.
$2.99 each Order DSUB6MF

Dual Antenna Mount

For HAM HF whip type antennas (similar to those shown below). Use the two, (3/8"X24) SM1 (included), mount as dual-antennas, or install your antennas in opposite directions, and mount the DAM bracket on 3/4" metal conduit for dipole performance, or portable and field-day operating.

$11.95 Order DAM

Reinforced, Double Bracket used with our "DBLSPCL" antennas shown elsewhere on this page.

Mount two mobile whips in a horizontal plane to form a compact apartment dweller Dipole, or RV antenna. Comes with two sets of mounting hardware (bolts), those shown here and another
set of longer bolts for larger masts. Double Antenna Bracket as shown at left.
$16.95 DBLBRKT

"BUX-stix" tuneable-tip Mobile antennas.

BHF75M 75 METER 3/8" X 24 THREAD 8 feet long $16.95

BHF40M 40 METER 3/8" X 24 THREAD 8 feet long $16.95

BHF20M 20 METER 3/8" X 24 THREAD 8 feet long $16.95

BHF17M 17 METER 3/8" X 24 THREAD 8 feet long $16.95

BHF15M 15 METER 3/8" X 24 THREAD 8 feet long $16.95

BHF10M 10 METER 3/8" X 24 THREAD 8 feet long $16.95

BHF6M 6 METER 3/8" X 24 THREAD 5 feet long $16.95

Replacement, 48 inch Tips for above tuneable-tip antennas. TIP48, $2.95

Here's the perfect solution for your RV and portable HF antenna applications. Use our dipole, mast-mounted bracket for 'fixed-station', field-day operating, apartment dwellers, and the RV travelers. With two of the mobile HF antennas shown at left, you can have the best of both worlds.

By combining a pair (two) of the single band HF Mobile (loaded) tuneable-tip antennas, and (VHF) whips at left, you can have an ideal, single element, horizontal dipole (beam). This type antenna opens the world of HF and VHF communications for the apartment dweller, RV HAM, field-day operating, and a variety of other uses and applications. Shown mounted on 1 & 1/4" mast. Antenna(s) Not Included. $16.95 each DBLBRKT
tuneable-tip antennas allow adjusting for minimum VSWR. CLICK HERE for more about our HF DIPOLE SPECIAL!

BUX stix HF antennas (ABOVE) for Mobile and Base Applications:
Power Rated at 250 Watts P E P;   Typical 2:1.VSWR bandwidth is:

�        75 meter: 40 KHz.         40 Meter: 60 KHz.
�        20 Meter: 150 KHz.      17 Meter: 175 KHz.
�        15 Meter: 200 KHz.      12 Meter: 300 KHz.
�        10 Meter: 500 KHz.        6 Meter: 1000 Khz.

TUNING INSTRUCTIONS:
Insert the whip into lower section ferrule about four inches (as shown at right) and tighten set screw.   Assemble with fiberglass lower section (as shown at left). Install a VSWR meter at the transceiver and apply 10 to 25 watts of power. Adjust the VSWR meter and output frequency for lowest VSWR reading, indicating resonance. If resonant frequency is too high, loosen set screw and extend top whip until desired resonant frequency is found. If resonant frequency is too low, loosen set screw and adjust whip further into lower section. For best results, adjustments should be made in small increments.

CAUTION: If required, cut off the bottom of the whip to ensure it does not extend down into the coil. Failure to observe this precaution will cause heat damage and void any warranty   extreme VSWR At resonance should be 1.5:1 or less when properly matched. When tuning is complete, tighten set screws securely.   NOTE: Bandwidth and VSWR will vary due to   mounting location. If your installation has a VSWR over 1.5:1 at resonance, or you need to operate over a greater bandwidth a tuner may be required.

An HF Dipole Antenna designed with the Apartment Dweller, RV, & Field-day operator in mind.
Don't be fooled by those over-priced knock-offs that use a piece of drilled aluminum that breaks in a cold wind. This is the original, Fixed station, RV, apartment dweller, and portable dipole from BUX Communications. It is designed for rapid deployment and effective HF communications where space is limited. The mounting bracket and hardware are made of high-quality, hard-drawn, aircraft aluminum, to withstand the elements and maintain a strong posture in adverse wind and weather conditions.

On a budget, Mobile in an RV, or live in a space-restricted environment?.. Here's the the solution: Here's an HF horizontal (or vertical) polarized antenna that will meet those beams "head-on!" When installed on a rotor, this combo makes a great bi-directional fixed-station antenna. Shown here with BUX UNUN (ONION) as the decoupling balun (unun) to prevent reradiating of the coax shield and better match at the antenna feed point.

When the stations with the gain and power in their antennas are transmitting in the horizontal plane, then you should be meeting them in the same plane. Horizontal signals tend to follow the earths contour, and are easier to capture using a horizontally polarized antenna. See the BUX UNUN elsewhere on this page.

BCC Photo �

Photo above; BUX COMM, "DBLCOMBO", see details below.
BUX COMM � graphics 1998-2004 (c)

By combining a pair (two) of the single band HF Mobile (loaded) tunable-tip antennas, you can have an ideal, single element, (bi-directional) horizontal dipole.

← At left; is a photo of the BUX CommCo dipole configuration using a pair of our model BHF20M mobile antennas, and our model DABRKT "Double Antenna BRacKeT." The DABRKT will fit up to one and a quarter inch (1-1/4") diameter mast.

The supporting mast is attached to the apex of our warehouse. Overall height of my antenna above ground is only 17 feet. When you see me on 20 meters (14.070,15 USB) running test on RASCAL interfaces, this is the antenna I am using.

←
By combining a pair (two) of the single band HF (VHF) whips at left, you can have an ideal, single element, horizontal dipole (beam). This type antenna opens the world of HF and VHF communications for the apartment dweller, RV HAM, field-day operating, and a variety of other uses and applications. Shown mounted on one and a quarter inch (1-1/4") diameter mast.
Bracket alone is $16.95
$16.95 each DBLBRKT

tuneable-tip antennas allow adjusting for minimum VSWR.

or see the DBLSPCL; details below↓

←
When you see me in QSO on 20 meters, using PSK31, I am using this antenna mount with two of the BHF-20 M antennas at 17 ft. An FT-817 at 5 watts PEP, worked 50 + countries.

When installed on a rotor, this combo makes a great bi-directional fixed-station antenna. Turning radius, seventeen feet, (approx).

HF Mobile (loaded), tunable-tip antennas

By combining a pair (two) of the single band HF Mobile (loaded) tuneable-tip antennas above, you can have an ideal, single element, horizontal dipole (beam). This type antenna opens the world of HF communications for the apartment dweller, RV HAM, field-day operating, and a variety of other uses and applications. The packages described below include two antenna, the Double Antenna-Bracket (DBLBRKT), and mounting hardware

$ 39.97 DBLSPCL (without BALUN) With BALUN, see "DBLCOMBO", below.
75 Meters→, 40 Meters→, 20 Meters→,

17 Meters→, 15 Meters→, 10 Meters→,

6 Meters →

By combining a pair (two) of the single band HF Mobile (loaded) tuneable-tip antennas above, you can have an ideal, single element, horizontal dipole (beam). This type antenna opens the world of HF communications for the apartment dweller, RV HAM, field-day operating, and a variety of other uses and applications. The package described below includes two antenna, the Double-Bracket (DBLBRKT), mounting hardware, and BUX BALUN (UNUN). $AVE $$$$$, ADD the BUX UNUN , shown below, BOTH, DPLSPCL & BUXUNUN,
for only $ 54.97, ORDER, DBLCOMBO
75 Meters→, 40 Meters→, 20 Meters→,

17 Meters→, 15 Meters→, 10 Meters→

6 Meters →

This is a sturdy 'straight' spring to attach to the 'ball' mount or the AM304S mount. Threads and stud are 3/8" X 24. For medium duty applications, antennas up to 60 inches long.

STEEL SPRING, $6.95 each S35C

Pick-Up Truck STAKE Mount $19.95

Heavy Duty Spring for Whips up to 102 inches.

The ever familiar 'HAM' mobile antenna 'barrel' spring to attach the whip to 'ball' mount. Helps prevent breaking that
expensive mobile antenna.
Threads and stud are 3/8" X 24.

S55S $8.95 each

BUX TRUX
Rail or Bumper Heavy-Duty Antenna Mount

This Heavy-Duty bar can be mounted or attached to a pick-up truck post rail, or to the metal bumper. Length of this bar is 12 inches, and width is 2 inches. The bar is almost one quarter inch thick. Mounting screws and 3/8" X 24 standard thread, stud mount are included. By using our KD-3 Kwik-Disconnect, you can quickly change bands, or make your antenna setup into a "stealth" installation. Also great for Apartment Dwellers and RV installations

$14.95 order BUXTRUXHD

Right Angle SM1L Mount Right angle stud mount with
SO239 coaxial cable connector and a 3/8-24 threaded
antenna socket. Great for those cramped
areas. Reg ~~11.95~~, BUX COMM Price: $8.88

$ 8.88 each

Shown here is our T-BAR TRUX Stake hole mount.
This one is for the serious HAM. The T-Bar mount
is constructed of stainless steel and locates the
antenna directly over the truck bed rail.
Expandable rubber base locks mount for secure
fit when tightened. Great for our HF stix and out
heavy-duty whips. Fits most pickup truck models
and brands. Heavy Duty Right angle SO239 and
3/8" x 24 threaded stud.

TSTAKMNT $ 24.99

Often called the mobile antenna, Kwik-Disconnect This Mobile Antenna Adapter... is a 'SNAP' to change antennas or bands in a matter of seconds. KD-3 $5.95 Ea		Set of five (5) Kwik-Connect Antenna adapters and snap-on stud. Make changing mobile antennas a 'SNAP!' with a set of 5 ''Kwik Disconnect'' adapters. These Mobile Antenna Adapters enable you to change bands in a matter of seconds. KD-5 $15.95 per set of 5.
WHEN WE SAY, "Super-Stud 750"...!!! This Stud-Mount is a super-heavy-duty version of our SM1, shown elsewhere on this page. It is an Insulated Antenna Stud Mount with SO-239 female connector for easy connecting with PL-259 fitting. Threaded for standard 3/8 X 24 mobile antenna base. SS750 $9.95 Each	The EZ230 enables you to fold your mobile antenna over to a low-profile, horizontal position. This prone position allows entry into low-overhead garages, and prevents damage to the antenna. A "must" for the mobile HAM. Both sleeve and threaded section are standard 3/8" X 24 threads. EZ230 $9.95 Each

Insulated Antenna Stud Mount with SO-239 female connector for easy connecting
with PL-259 fitting. Threaded for standard 3/8 X 24 mobile antenna use.
Regular $4.95, BUX Price, 2.99 each SM1

Quantity Special, SM1X10 10, for 17.95,

Replacement, Hardened, Nylon, Heavy duty, Shoulder washer insulators, same as shoulder washers in SM1 Stud-Mount.
4 for 99� SM1SW

Mirror-Mount with insulated stud, for 3/8 X 24 thread medium
duty mobile antenna mounting.

$6.95 Each AM304S

Antenna Coax Switch; One IN, Three Out, or Three IN, and One OUT 50 Ohm impedance, 3 port to 1 port Antenna Switch. Rated at 1 KW, SO-239 ports

In metal case. $9.95 CX3

Heavy Duty 3-1/2'' ball mount to support that HF mobile antenna. The ball has 3/8'' X 24 threads, and coax connection is SO-239. Locking ball swivel mount provides an adjustment to any angle. Heavy duty Chrome plated ball.   Accepts standard 3/8 x 24 TPI threaded antenna or mounting accessory. Use direct PL-259 connection, or the 'Lug' connection for closer fits.

Ball Mount with SO-239 (female) connector,
AM601S $9.95

Ball Mount with terminal lug connection,
AM601L   $9.95

Included→

Bumper Mount includes (SM1) SO-239 UHF connector to 3/8x24 antenna base (see SM1, this page).
$7.95 ea AM370RS

Included→

$16.95 Order 442 S
Adjustable Bumper Mount with 3/8"x24 thread SM-1, and SO239 (PL259) input.
Both may be used on hatch-back lid-lip, trunk-lip, bumper & hood.→

$9.95 Order 422-S
BUMPER MOUNT with SO239 input connector, accepts PL259.

YES, we have them in Stock!

NMO-5 Mount "RAIN" CAP.
Cap/cover the NMO mount when not in use.
Comes in basic gloss black.
The NMO cover with built-in "0-Ring" seal.

NMO-5 .99 each

NMO mount only. For virgin installation when cable is already in place. No cable,
only the NMO mount. Hardened Brass.

$4.95 NMO-2

HR-22

You've heard about it, and here it is; The GOLDEN Super "ROD" antenna

Six section, telescoping "rod" antenna for hand-held

transceivers

VSWR: Less than, 1.5:1

Connector: BNC male

Length: 108cm extended (48")

and 26.5cm collasped. approx.

HR-22 ~~$12.95~~ $8.95

MARINE ANTENNA
No Ground VHF Marine Antenna.

Ideal for bass boats, small run-about, and sail boats. 3 dB gain effectively doubles your transmitter's effective radiated power. Great for auto's with fiberglass body's or for wood craft - no ground required.
Low profile 36" height is ideal for top mast mounts on sailboats or for use on bass and ski boats or run-a-bouts where long antennas might hamper operations. Comes complete with stainless steel "L" type mounting bracket and preassembled 15' white coaxial cable already fitted with PL259 connectors.
~~Reg $59.95~~ VH-3200
Now $37.97


OPTO-Isolators & Photo-Darlingtons *Back To Top*
Part #	3 for .99	20 for $4.99
4N25
4N26
4N27
4N28
4N29	*6-PIN DARLINGTON OPTOCOUPLERS*	*DARLINGTON OPTOCOUPLERS*
4N30 & 4N31	*6-PIN PHOTODARLINGTON OPTOCOUPLERS*	*DARLINGTON OPTOCOUPLERS*
4N32 & 4N33	*6-PIN DARLINGTON OPTOCOUPLERS*	*DARLINGTON OPTOCOUPLERS*

4N35
4N36
4N37
CNY17
CNY75B
CNX35
CNY36
H11B	*6-PIN DARLINGTON OPTOCOUPLERS*	*DARLINGTON OPTOCOUPLERS*
H11D
MCA2230	*6-PIN DARLINGTON OPTOCOUPLERS*	*DARLINGTON OPTOCOUPLERS*
MCA2231	*6-PIN DARLINGTON OPTOCOUPLERS*	*DARLINGTON OPTOCOUPLERS*
MCA2255	*6-PIN DARLINGTON OPTOCOUPLERS*	*DARLINGTON OPTOCOUPLERS*
MCL2501
MCL2601
MCL2530
MCL2730
MCL2731
MCP3030
MCS2
MCS21
MCS22
MCS2241
MCS2401
MCS6201
MCT26
MCT270
MCT273
MCT274
MCT2201
Part #	3 for .99	20 for $4.99
	OPTO-Isolator	OptoDarlington
		2N5033 used in opto isolator circuits as darlington add-on to support relay switching radios that draw more current than the OptoCoupler rating. 2/.99

Phone Orders: 10:00 AM to 4:00 PM (Eastern time, Monday thru Friday, Except HOLIDAYS.)
Orders Only 434-534-8873 Orders Only

When placing phone orders, have list of items (model numbers), descriptions, and credit card, (VISA, Discover, or MasterCard) information ready, so we can process your order, to ship same day. Please be sure to use correct "Ship-To" Address, ZIPcode, Callsign, and Phone number* (* UPS required). ALL INFORMATION IS KEPT COMPLETELY CONFIDENTIAL, AND NO MAILING LISTS ARE SOLD, CONVEYED, OR OTHERWISE TRANSMITTED !

ALINCO We Accept Mail or FAX form CLICK HERE!
CBL Model No. ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX. →		Additional RASCAL to Radio CBLs are $14.95 Each.
CBL Number	Description (Transceiver model)	Radio Jack/Port	YES, we sell to dealers, call for info!
CBL-AK8M	DX-77T, DX-70TH, DR-110T, DR-130T, DR-410T, DR-510T, DR.112T, DR-570T, DR-590, DR-592, DR-599, DR-600, DR-430T, DR135T/EMKII, DR-235T/TG, DR-435T/TG, DR-620T, DR-M06TH, DR-M03SX, ALR-22T, ALR-22HT, ALR-72T, ALD-24T,
CBL-DJ25S	DJ-120, DJ-160/460, DJ-100, DJ-120 DJ-200 DJ-500, DJ-C1T, C4T, C5T,
CBL-20	Alinco Hand-Helds with 2.5mm & 3.5mm I/O DJ180/480, DJ-196(DJ-195/296/496, DJ-F1/F4, DJ-S1/S4, DJ-160, DJ-460, DJ-162, DJ-560, ALM-203T, ALR-206, DJ-180T, DJ-280T, DJ-480T, DJ-580T, DJ-191T,
CBL-AL45	DR-140, DR-605,
CBL-AL6A	Alinco 8 pin screw-on mic with receive at pin 6 of Mic I/O. For ALINCO models: DX-77, DR-119, DR-1200
CBL AL135	Alinco DR-135 DataRadio
CBL MDIN	BUX NOTICE: Throughout our web pages, you'll see references to the 6 pin Mini DIN. This is the latest attempt by the ISO 9002 committee, to establish a "standard" for 1200 and 9600 baud I/O with PTT. If your radio has this jack as an I/O, this is the port to use for the digital modes, as it enables leaving your microphone connected. If your transceiver supports this 6 pin Mini DIN I/O, then consider using our cable model, "CBL MDIN" with the RASCAL GLX. By using this jack you've enabled simultaneous use of the digital modes and voice operation. (some transceivers require "menu selection" to activate this I/O).
BACK TO TOP
NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered. Additional CBLs may be ordered via the SHOPPING CART @ $14.95 each.
AZDEN We Accept Mail or FAX form CLICK HERE!
CBL Model No. ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX. →		RASCAL to Radio CBLs are $14.95 Each.
CBL-MDIN	AZDEN 6 pin Mini DIN for PCS 9000 Data Port
CBL AZMX	AZDEN transceivers with 8 pin screw-on mic and 3.5mm Ext Spkr plug

BACK TO TOP
COLLINS We Accept Mail or FAX form CLICK HERE!
To view diagram, click the shopping cart for that model. CBL Model No. ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX. →		*Additional* RASCAL to Radio CBLs are $14.95 Each.
CBL-75767	Transceivers with Patch IN, Patch OUT, and PTT RCA jacks
CBL-CW	RASCAL to transceiver cable for hard-keyed CW operating	CBL-CW is supplied with 3.5 and 1/4" plugs to CW jacks

BACK TO TOP

DRAKE We Accept Mail or FAX form CLICK HERE!
CBL Model No. ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX. →		*Additional* RASCAL to Radio CBLs are $14.95 Each.
CBL-TR7	DRAKE 4 pin screw-on mic with 3.5mm (1/8") Ext Spkr jack Models TR-7 or TR-7/A, and some TR-22, TR-33, TR-7, UV-3 radios
CBL-TT25	DRAKE TR-4, TR-4C, TR-4CW, and TR-6 radios. Only the standard 1/4 inch Stereo plugs are supplied! SwitchCraft 230 (Collins) type 3-circuit MIC plug are NOT included. Similar interface to Drake "TWINS." (R4B & TX4B)
CBL-CW	RASCAL to transceiver cable for hard-keyed CW operating	CBL-CW is supplied with 3.5 and 1/4" plugs to CW jacks

BACK TO TOP
ICOM We Accept Mail or FAX form CLICK HERE!
CBL Model No. ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX. →		*Additional* RASCAL to Radio CBLs are $14.95 Each. Each $39.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).
CBL-IC8M	ICOM HF, VHF,/UHF Transceivers w/8 pin Screw-On MIC & Ext Spkr jack. ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746, 756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics. Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751,
CBL-IC8PD	ICOM HF-, Transceivers with 8 pin DIN accessory jack ICOM Models: IC-275, IC-475, IC-721, IC-723, IC-725, IC-726, IC-728, IC-729, IC-732, IC-735, IC-736, IC-737, IC-737A, IC-738, IC-746, IC-746,<HF>IC746PRO, IC-756, IC-756PRO, IC-756PROII, IC-760/Pro, IC-761, IC-765, IC-775, IC-775DSP, IC-780, IC-781, IC-820, IC-821H, IC-910H, IC-970E, IC-970H, IC-1275, IC-2000 and other Icom transceivers with 8 pin DIN accessory I/O ports. AND MORE !
*CBL 746V*	This RASCAL GLX to Transceiver uses both the 8 pin DIN and 7 pin DIN, of the 746 & 756 PRO series. This is a SPECIAL built cable for use with the Icom 746 & 756 series for use at VHF (NOT HF). Note price of this CBL is 19.95
CBL-IC13RY	ICOM Transceivers with 13 pin DIN accessory jack w/ FSK pin. Wired for HF use. BEST CHOICE for Icom IC-706 mk II & IC-718;
CBL-IC13VU	ICOM Transceivers with 13 pin DIN accessory jack wired for VHF/UHF operation For Icom IC-706 mk II and ICOM transceivers with similar I/O jack.
CBL-MDIN	Six pin mini DIN (VHF) jack for the706 and, transceivers with this I/O Most used for VHF operation with the 706 MK II, IC-207H and ICOMs with similar I/O
CBL-IC45	ICOM HF, VHF, and UHF transceivers with RJ-45 Modular Mic jacks ICOM models: IC-207H, 2720, 2800, 703, IC-706, IC-718, IC-V8000, IC-281, IC-381, IC-481, IC-681, IC-2000, IC-2100, IC-2200, 2350, 2340, and similar Icom I/O. (Note: for 706 & 718, most ops prefer CBL IC13RY)
CBL-IC4M	ICOM HF-VHF Transceivers with 4 pin screw-on mic & Ext Spkr ICOM models IC-202, IC-215, IC-22S, IC-245, IC-280, IC-402, IC-502, etc...
CBL-20	ICOM, handheld transceiver(s) with 2.5mm & 3.5mm jacks Icom W32A, W32E, IC-T7A, T7E, IC-T8A, T8E, and Icom Hand Helds with similar I/O. NOTE: Be sure your Hand-Held uses the same connector format: 2.5mm (TxAFSK/PTT) and 3.5mm (Rx AF).
CBL-CW	RASCAL to transceiver cable for hard-keyed CW operating	CBL-CW is supplied with 3.5 and 1/4" plugs to CW jacks
CLICK HERE> Solutions and Cures for Sound Card Hum Problems
NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered. Additional CBLs may be ordered via the SHOPPING CART @ $14.95 each.
CBL-QRP+	INDEX LABS "QRP+"

BACK TO TOP
KENWOOD Mail or FAX form CLICK HERE! E!
CBL Model No. ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX. →		*Additional* RASCAL to Radio CBLs are $14.95 Each.
CBL-KW8M	KENWOOD Transceivers with 8 pin Screw-On mic & Ext Spkr I/O KENWOOD models: TM-201, TM-221, TM-231, TM-241, TM-2530, TM-401, TM-421, TM-431, TM-441, TM-531, TM-541, TM-621, TM-631, TM-701, TM-721, TM-731, TR-3200, TR-50, TS-50/S, TS-60, TS-751, TS-851, TS-140, TS-430, TS-440, TS-450, TS-660, TS-670, TS-680, TS-690, TS-701, TS-711, TS-780, TS-790, TS-811, TS-850, TS-870, TS-930, TS-940, TS-950, TW-4000, 4100, and Kenwood transceivers with 8 pin screw-on Mic connectors
CBL-KW13RY	Kenwood Transceivers with 13 pin DIN accy jack. w/ FSK "pin." YES, It includes TS-2000 TS-140, TS-450, TS-570, TS-670, TS-680, TS-690, TS-711, TS-790, TS-811, TS-850, TS-870, TS-950, and Kenwood transceivers with 13 pin DIN accessory jacks. Early Kenwood (940 & 440 below) transceivers with 13 pin DIN Accessory Jacks see CBL KW40-13 For TS-850 FSK operation, see CBL KW13RY"R" below.
CBL-KW13RYR	Kenwood TS-850 and KW Transceivers with 13 pin DIN accy and "FSK RCA Jack" For TS-850 Kenwood transceivers with 13 pin DIN and RTTY/FSK "RCA Jack".
CBL-KW4013	Early KENWOOD HF Transceivers with 13 pin DIN accessory jack TS-940, 440..
CBL-MDIN	KENWOOD Transceivers with 6 pin mini DIN (ISO standard) jack (KENWOOD Models: TM-255, TM-455, TM-733, TM-833, TM-G707, TM-V7A, TM-G 707A, (Delta) D-700, 480hx, and transceivers with 6 pin mini DIN data I/O)
CBL-THF6	KENWOOD HandHeld Transceivers with 3.5mm & 2.5mm "stereo" I/O (KENWOOD Models: TH-F6A, TH-F7E and transceivers with similar I/O)
CBL-026	KENWOOD TR-2600 HandHeld Transceivers with 3.5mm & 2.5mm (KENWOOD Models: TR-2600 and transceivers with similar I/O)
CBL-KW45	KENWOOD HF and VHF Transceivers with (RJ45) MODULAR mic TM-251, TM-2400, TM-255, TM-261, TM-451, TM-455, TM-461, TM-643, TM-732, TM-733, TM-741, TM-742, TM-833, TM-841, TM-842, TM-941, TM-942, and Kenwoods with RJ45 mic jacks
CBL-KW4M	KENWOOD HF Transceivers w/4 pin screw-on mic & Ext Spkr jack TS-120, TS-130, TS-180, TS-311, TS-510, TS-511, TS-520, TS-530, TS-600, TS-700, TS-770, TS-801, TS-820, TS-830, TS-900, TX-310, TR-1300, TR-2200, TR-5200, TR-2300, TR-7010, TR-7200, TR-7400, TR-7500, TR-8000, TR-8200, TR-8300, and more)
CBL-KW6M	KENWOOD HF Transceivers with 6 pin screw-on mic & Ext Spkr jack TR-7730, TR-7750, TR-7800, TR-7850, TR-7930, TR-7950, TR-8400, TR-9000, TR-9130, TR-9500, and other Kenwood transceivers with 6 pin screw-on mic connectors
CBL-CW	RASCAL to transceiver cable for hard-keyed CW operating	CBL-CW is supplied with 3.5 and 1/4" plugs to CW jacks
NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered. Additional CBLs may be ordered via the SHOPPING CART @ $14.95 each.
BACK TO TOP
KDK We Accept Mail or FAX form CLICK HERE!
CBL-KDK4MX	KDK Transceivers w/4 pin screw-on mic & Ext Spkr jack
BACK TO TOP
MIDLAND We Accept Mail or FAX form CLICK HERE!
CBL-MID4MX	Midland Transceivers w/4 pin screw-on mic & Ext Spkr jack
BACK TO TOP If you don't see a cable (CBL) model for your transceiver, let us know, and we'll try to make it.
Radio Shack We Accept Mail or FAX form CLICK HERE!
CBL Model No. ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX. →		*Additional* RASCAL to Radio CBLs are $14.95 Each. Each $39.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).
CBL-HTX10	Radio Shack HTX-10
CBL-HTX100	Radio Shack Model HTX-100
CBL-HTX242	Radio Shack Model HTX-212, and HTX-242 or RS 45
CBL-HTX252	Radio Shack HTX-252
CBL-20	Radio Shack HTX-202 & HTX-404

NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered. Additional CBLs may be ordered via the SHOPPING CART @ $14.95 each.
BACK TO TOP
RCI We Accept Mail or FAX form CLICK HERE!
CBL Model No. ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX. →		*Additional* RASCAL to Radio CBLs are $14.95 Each. Each $39.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).
CBL-RCI6	RCI 5054 and RCI radios with 6 pin screw-on MIC This interface uses the 3.5mm external speaker jack for receive AF, and requires SwitchBox for SSTV.

BACK TO TOP
SBE 34 We Accept Mail or FAX form CLICK HERE!
CBL Model No. ↓	DESCRIPTION, Make and Model of Transceiver		*Additional* RASCAL to Radio CBLs are $14.95 Each.
CBL-SBE34	SIDEBAND ENGINEERS model SBE 34 This interface provides open-end connection for the SBE34 external speaker screws.. Tx AF input and PTT is to the 1/4" MIC jack.

NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered. Additional CBLs may be ordered via the SHOPPING CART @ $14.95 each.
BACK TO TOP
SGC We Accept Mail or FAX form CLICK HERE!
CBL Model No. ↓	DESCRIPTION, Make and Model of Transceiver		AdditionalRASCAL to Radio CBLs are $14.95 Each.
CBL-2020	SGC model SG-2020 This interface uses the 3.5mm external speaker jack to extract receive audio.
BACK TO TOP
Ten Tec We Accep Mail or FAX form CLICK HERE!
CBL Model No. ↓	DESCRIPTION, Make and Model of Transceiver		Additional RASCAL to Radio CBLs are $14.95 Each.
CBL-5PD	Ten-Tec with 5 pin DIN data I/O accessory jack Ten-Tec PEGASUS, Jupiter, (538), and radios with similar 5 pin DIN data I/O. 5 pin (standard) DIN to 5 pin DIN.
CBL-ORION	Ten-Tec ORION (565) Ten-Tec Orion transceivers with AUX I/O, 8 pin DIN jack.
CBL-OMNI	For Ten-Tec transceivers with; PTT, Tx IN, Rx IN RCA jacks: Ten-Tec OMNI V, & OMNI VI (Late Model Paragon, and Corsair) and transceivers with RCA jacks for ''Patch IN, Patch OUT, and PTT'' jacks.
CBL-TT25	Ten-Tec transceivers with 1/4 inch Mic and Ext Spkr jacks: Early Ten-Tec Triton 544, Argonaut 505, 509, 515, (early Omni V see late model; R-TTOMNI) below), and other Ten-Tec HF Transceivers with 1/4 inch Stereo Mic I/O and 1/4 inch mono external speaker jack.* NOTE: This interface cable works with other vintage transceivers; eg; Atlas, Swan,Drake, etc...
CBL-TT4M	Ten-Tec transceivers w/4 pin screw-on mic & 1/4" Ext Spkr I/O	with 1/4" Ext Spkr plug
CBL-CW	RASCAL to transceiver cable for hard-keyed CW operating	CBL-CW is supplied with 3.5 and 1/4" plugs to CW jacks
CLICK HERE> Solutions and Cures for Sound Card Hum Problems
BACK TO TOP
UNIDEN We Accept Mail or FAX form CLICK HERE!
CBL Model No. ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX. →		*Additional* RASCAL to Radio CBLs are $14.95 Each. Each $39.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).
CBL-UNIDEN5MX	UNIDEN and some HR2510 with 5 pin Screw-On Mic and Ext Spkr jack.

NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered. Additional CBLs may be ordered via the SHOPPING CART @ $14.95 each.
BACK TO TOP
YAESU We Accept Mail or FAX form CLICK HERE!
CBL Model No. ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX. →		*Additional* RASCAL to Radio CBLs are $14.95 Each. Each $39.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).
CBL-Y8M	YAESU transceivers with 8 pin (screw-on) mic input. Receive audio be taken from the external speaker jack. YAESU models: FT-1, FT-77, FT-102, FT-107, FT-211, FT-290 MKII, FT-480, FT-690 MKII, FT-707S, FT-712, FT-726, FT-736, FT-747, FT-757, FT-767, FT-770, FT-840, FT-850, FT-790 MK II, FT-912, FT-980, FT-990, FT-1000, FT-2200, FT-2700, FT-5100, FT-7200, FT-840, FT-890, FT-4700, FT-212, FT-ONE-S, FT-650, 707, 712, 726, 736, 756, 767, 77, 790II, 700, 840, 890, 990, 1000D and MORE,
CBL-Y4M	YAESU transceivers with 4 pin (screw-on) mic input Receive audio is from the external speaker jack. YAESU models: having 4 pin screw-on microphones.
CBL-MDIN	YAESU transceivers having a, 6 pin Mini DIN for data I/O YAESU FT-817, FT-100, FT-897, FT-1500, FT-3000, FT-8000, FT-8100, FT-8500, and FT-857 etc.. and *FT-847 "VHF" port.
CBL-847HF	YAESU FT-847 3.5mm HF Data I/O HF jack For Yaesu FT-847 "HF" Data Jack (*NOTE: see CBL MDIN for 847 VHF operation
CBL-FT600+	YAESU FT-736, FT-600, FT-890, & Late Model FT-900. 3.5mm HF Data I/O HF jack PTT is via RCA "PTT" Jack.
CBL-YX	YAESU hand-held transceivers with 4 circuit, 3.5mm I/O jack. YAESU FT-10, FT-40, FT-50, VX-1, VX-5, VX-150, and Yaesu handhelds with similar I/O.
CBL-FT2500	YAESU FT-2500M 2400 & Yaesu transceivers with similar I/O YAESU FT-2500, 2500M, 2400, etc
CBL-FT2600	YAESU FT-2600 & Yaesu transceivers with DB9f I/O YAESU FT-2600, 2600M, etc
CBL-FT2800	YAESU FT-2800 & Yaesu transceivers with RJ 12 Mic & 3.5mm Ext Spkr YAESU FT-2800, 2800M, etc
CBL-75767	YAESU transceivers using the rear panel RCA jacks; YAESU FT-102, FT-757, FT-767, FT-920, etc
CBL-5PD	YAESU FT-1000"Mark V" Transceiver PSK31 Interface Use also with YAESU FT-920 (insure that data mode switch is in AFSK position) SPECIAL NOTE: Use the FT1000 MkV, "EASY SET" to configure 5 pin DIN, Packet jack, for USB. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)
CBL FT900/e	Early model YAESU FT-900 and Yaesu transceivers with similar I/0 For LATE model FT-900, see CBL F600 above. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)
CBL FT990	YAESU FT-990 and Yaesu transceivers with similar I/0 For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)
CBL-1000D	YAESU FT-1000"D" Transceiver PSK31 Interface cable "NOTE" Receive AF is at "RING" of 3.5mm plug. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)*
CBL-1000MP	YAESU FT-1000"MP" Transceiver PSK31 Interface cable "NOTE" Receive AF is at "TIP" of 3.5mm plug. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)*
CBL-FT4RY	YAESU transceivers with 4 pin DIN RTTY jacks NOTE: This cable enables FSK/RTTY operation only.
CBL-20	YAESU FT-51R & Yaesu handhelds with similar I/O Yaesu handheld transceiver(s) using similar 2.5mm (TxAFSK/PTT) and 3.5mm (Rx AF) "mono" I/O
CBL-CW	RASCAL to transceiver cable for hard-keyed CW operating	CBL-CW is supplied with 3.5 and 1/4" plugs to CW jacks
CLICK HERE for → Solutions and Cures for Sound Card Hum Problems
NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered. Additional CBLs may be ordered via the SHOPPING CART @ $14.95 each.
So you bought one of those (brand X) interfaces that do not isolate the sound card receive audio (input/ Line IN). This ISOL8R will provide the isolation and help prevent HUM, they forgot to include. If you only order one, order it for the Sound Card LINE OUT, to protect your Transmit audio from HUM. ORDER 1, to isolate your transmit audio, 9.97 ISOL8R SAVE and buy 2, CBL-ISOL8R , Use one for Sound Card IN, and one for SoundCard OUT. ORDER 2, and save, 17.97 ISOL8RX2

WINDOW CLIP for HT or SCANNER ANTENNA

* Easy Mount Window Clip, No Holes *Low Profile Cellular Style * Includes 8ft Cable and SMA Connector * SMA CONNECTOR ADAPTOR NOW FITS LATE MODEL HT's * Molded Weather Proof Connections * Frequency Coverage 25 MHz to 1.2 GHz

HandHeld "HR-9" Duckie

Pkg of 1 Insulator 1.10 each

Package of 3, $2.99 / 3

* Easy Mount Window Clip, No Holes
Low Profile Cellular Style
Includes 8ft Cable and SMA Connector
* SMA CONNECTOR ADAPTOR NOW FITS LATE MODEL HT's
* Molded Weather Proof Connections
* Frequency Coverage 25 MHz to 1.2 GHz