JaComm, PacketRadio.com, AmateuRadio.org, SEDAN.org, BUXcommCO.com, and K4ABT.com are wholly owned subsidiaries of:
 BUXCOMM Corp.        EVINGTON,  VA  24550, HOME of the RASCAL

Antennas, Baluns, Mounts and Accessories for Base and Mobile Stations
A top quality, Dual Band Magnet Mount Antenna,  priced less than 20 dollars... For 2 meters and 70 cm.  This Dual-Band antenna usually cost twice as much,  We bought a truck load, and we are passing the savings to you.   144/440 magnet mount antenna for Amateur use.  This dual band mobile antenna is styled in the "cellular" look for use on both 2 meters and 440 MHz.	* 1/4 wave on 2 meters * 2.5 dBi gain at  440 MHz. * Rated at 200 Watts * 12 ft of RG-58 cable with *PL-259 connector.  * Magnet mount designed for winds of 100 mph * Overall height is 21 inches. With PL-259*connector attached; _________________________________________________ Same as above, but has *BNC connector attached ↓ $18.95 each ORDER VU-1510-B	$ 17.95  VU-1510      $18.95  VU-1510-B
5/8 wave antenna 136 - 174 MHz    . NMO Base  (Mount not included)   ·  39 inches overall   ·  VSWR less than 1.5:1 ·  150 Watts     130 - 174 MHz VH-1215  $16.95 _____________ 220-265 MHz version  PM220    $21.95		VH-1215  $16.95   PM220  $21.95
UV-325 VHF/UHF (dual-band) mobile antenna: VHF 144~148 MHz, 3 dB gain UHF 440~450 MHz, 5 dB gain VHF/UHF dual band mobile communication antenna  Unique design, durable construction NMO connection	Recommended Mag Mount is AM-1045 B,   NMO Mounts shown below.       SAVE.. Get both, the UV325 (ABOVE) VHF/UHF (NMO) Antenna & the AM-1045B, 5 inch, Super Heavy-Duty Magnet Mount for $29.99	UV325   $17.95    BOTH 325 &1045  for $29.95
VHF mobile communication antenna 130MHz to 174MHz, 3dBVHF mobile communication antenna  Unique design, durable construction NMO connection, with cutting chart	VH-1215     5 Inch  $17.95     AM-1045B	VH-1215  16.95         5 Inch  $17.95  AM-1045B
SAVE.. Get both, the VH-1215 (ABOVE) 130-174 MHz (NMO) and the AM-1045B, 5 inch, Super Heavy-Duty Magnet Mount for $27.95	Order 1215-1045  $27.99	Both for $27.95
Thru-Glass Antennas VHF & UHF Dual Band model   VUG270   $ 27.97    Single band,  VHF  VUG144    $ 22.97		VUG270   $ 27.97    VUG144   $ 22.97
HR-22   You've heard about it, and here it is; The GOLDEN Super "ROD" antenna Six section, telescoping  "rod" antenna for hand-held transceivers VSWR:    Less than, 1.5:1 Connector:   BNC male Length:   108cm extended (48") and 26.5cm collasped. approx.		HR-22   $12.95   $8.95
MARINE   ANTENNA No Ground VHF Marine Antenna.Ideal for bass boats, small run-about, and sail boats.   3 dB gain effectively doubles your transmitter's  effective radiated power.  Great for auto's with fiberglass body's or for wood craft - no ground required.   Low profile 36" height is ideal for top mast mounts on sailboats or for use on bass and ski boats or run-a-bouts where long antennas might hamper operations. Comes complete with stainless steel "L" type mounting bracket and preassembled 15' coax cable fitted with PL259 connectors. Reg $59.95  VH-3200 $37.97		$37.97
When you hear those strong HF mobile signals, here's one reason they stand out from the rest.  By installing the BUX MoBalun near the input to your antenna, you deliver more RF energy to the antenna. At the same time, the BUX MoBalun prevents RF from traveling back along the shield (high SWR) of your coax. High power rating, Low-permeability toroid, with Internal composition fiber-glass to prevent vibration during mobile operation. For input and output connectors, we use only the best Silver plated, Teflon insulated, SO239 connectors. 500 watts.	Our MoBALUN is also ideal for marine antenna installations.   $19.95 MOBALUN	19.95  MOBALUN
3 inch, NMO Magnetic antenna mount. Black finish, and a good "grabber" to a smooth, flat, metal surface. A good companion mount for the DB-2 shown below. Larger, 5 inch heavy duty Magnet, w/coax and connector.  5 inch, NMO Magnetic antenna mount. Black finish, and a good "grabber" to a smooth, flat, metal surface.  A good companion mount for the UV325 shown near top of this page.	←3.5 Inch, $14.95    5 Inch  $17.95	AM-1043B 3.5 Inch, $14.95 AM-1045B  5 Inch  $17.95
Dual Band mobile antenna for 144 & 430 MHz   VSWR:  Less than, 1.5:1 Connector:  NMO base. Length: 39cm or 15.5 in. approx.   ADD the NMO, 5 inch magnet mount for a durable, dual-band mobile antenna combo	DB-2     ________________________________________ ADD this NMO, 5 inch magnet mount for a durable, dual-band mobile antenna combo.  See AM-1043, 3 inch, NMO Magnetic Mount above.	DB2  $14.95     Both, DB-2 and 1045B  for only: $29.95  DB2-45
REMOUNT KIT  for all TG Series (Thru-Glass) Antennas.	Kit contains: 2 - Adhesive Pads 1 - Alcohol Swads 1 - Trim Plate 1 - Shrink Tube REMNTKIT  4.97
Great for Apartment Dwellers, RV, pickup truck-bed rail, or Bumper installations.  Rail or Bumper Heavy-Duty Antenna Mount Length of this bar is 12 inches, and width is 2 inches.  The bar is almost one quarter inch thick.  Mounting screws and 3/8" X 24 standard thread, stud mount are included.    By using our KD-3 Kwik-Disconnect, you can quickly change bands, or make your antenna setup into a "stealth" installation.	Heavy-Duty Antenna Mount. Length of this bar is 12 inches, and width is 2 inches.  The bar is almost one quarter inch thick. BUX  TRUX HD	$14.95  order  BUXTRUXHD
Shown here is our T-BAR TRUX Stake hole mount.  This one is for the serious HAM.  The T-Bar mount is constructed of stainless steel and locates the antenna directly over the truck bed rail.  Expandable rubber base locks mount for secure fit when tightened. Great for our HF stix and out heavy-duty whips. Fits most pickup truck models and brands.  Heavy Duty Right angle SO239 and 3/8" x 24 threaded stud, (see SML1 below).		TSTAKMNT $ 24.99
Right Angle SM1L Mount Right angle stud mount with  SO239 coaxial cable connector and a 3/8-24 threaded antenna socket. Great for those cramped areas.  Reg 11.95,  BUX COMM Price:  $8.88	$ 8.88  each	8.88  each
	Pick-Up Truck STAKE HOLE Mount  $19.95	Pick-Up Truck STAKE HOLE Mount  $19.95
Adjustable Bumper Mount with 3/8"x24 thread SM-1, and SO239 (PL259) input.  Both may be used on hatch-back lid-lip, trunk-lip, bumper & hood. $16.95   Order 442 S	Included→	442 S  $16.95
BUMPER MOUNT with SO239 input connector, accepts PL259.   $9.95 Order 422-S		422-S  $9.95
Ball Mount,  Heavy Duty 3-1/2'' ball mount to support that HF mobile antenna. The ball has 3/8'' X 24 threads, and coax connection is SO-239. Locking ball swivel mount provides an adjustment to any angle. Heavy duty Chrome plated ball.   Accepts standard 3/8 x 24 TPI threaded antenna or mounting accessory. Use direct PL-259 connection, or the 'Lug' connection for closer fits.	Ball Mount with SO-239 (female) connector,  AM601S $9.95     Ball Mount with terminal lug connection, AM601L   $9.95	AM601S $9.95     AM601L $9.95
Heavy Duty Spring for Whips up to 102 inches. The ever familiar 'HAM' mobile antenna 'barrel' spring to attach the whip to 'ball' mount. Helps  prevent breaking that expensive mobile antenna. Threads and stud are 3/8" X 24.		S55S $8.95 each
STEEL SPRING, This is a sturdy 'straight' spring to attach to the 'ball' mount or the AM304S mount. Threads and stud are 3/8" X 24. For medium duty applications, antennas up to 60 inches long. $6.95 each  S35C		$6.95 each S35C
Often called the mobile antenna, Kwik-Disconnect This Mobile Antenna Adapter... is a 'SNAP' to change antennas or bands in a matter of seconds.		KD-3 $5.95
Set of five (5) Kwik-Connect Antenna adapters and snap-on stud. Make changing mobile antennas a 'SNAP!' with a set of 5 ''Kwik Disconnect'' adapters. These Mobile Antenna Adapters enable you to change bands in a matter of seconds.		KD-5 $15.95 Set of 5.
The EZ230 enables you to fold your mobile antenna over to a low-profile, horizontal position.  This prone position allows entry into low-overhead garages, and prevents damage to the antenna.  A "must" for the mobile HAM.   Both sleeve and threaded section are standard 3/8" X 24 threads.		EZ230   $9.95
Here's the perfect solution for your RV and portable HF antenna applications.  Use our dipole, mast-mounted bracket for 'fixed-station', field-day operating, apartment dwellers, and the RV travelers.  With two of the mobile HF antennas shown at left, you can have the best of both worlds.  By combining a pair (two) of the single band HF Mobile (loaded) tuneable-tip BUX Stix, and (VHF) whips shown below, you can have an ideal, single element, horizontal dipole (beam). This type antenna opens the world of HF and VHF communications for the apartment dweller, RV HAM, field-day operating, and a variety of other uses and applications.  Shown mounted on 1 & 1/4" mast.  Antenna(s) Not Included.		DBLBRKT  $14.95
BUX-stix tuneable-tip Mobile Antennas tuneable-tip antennas allow adjusting for minimum VSWR.	BHF75M  75 METER  3/8" X 24 THREAD 8 feet long $16.95        BHF40M 40 METER  3/8" X 24 THREAD  8 feet long $16.95        BHF20M 20 METER 3/8" X 24 THREAD  8 feet long $16.95         BHF17M 17 METER  3/8" X 24 THREAD 8 feet long $16.95         BHF15M 15 METER 3/8" X 24 THREAD 8 feet long $16.95                                                             BHF10M 10 METER  3/8" X 24 THREAD 8 feet long $16.95                                                             BHF6M  6 METER  3/8" X 24 THREAD 5 feet long  $16.95              Replacement, 48 inch Tips for above tuneable-tip antennas. TIP48, $2.95
Dual Antenna Mount For HAM HF whip type antennas (similar to those shown below).  Use the two, (3/8"X24) SM1 (included),  mount as dual-antennas, or install your antennas in opposite directions, and mount the DAM bracket on 3/4" metal conduit for dipole performance, or portable and field-day operating.		$11.95  Order  DAM
Reinforced, Double Bracket used with our "DBLSPCL" antennas shown elsewhere on this page.  Mount two mobile whips in a horizontal plane to form a compact apartment dweller Dipole,  or RV antenna.  Comes with two sets of mounting hardware (bolts), those shown here and another set of longer bolts for larger masts.  Double Antenna Bracket as shown at left.		$16.95 DBLBRKT
An HF Dipole designed with the Apartment Dweller, RV, & Field-day operator in mind.                       Back To Top
When the stations with the gain and power in their antennas are transmitting in the horizontal plane, then you should be meeting them in the same plane.  Horizontal signals tend to follow the earths contour, and are easier to capture using a horizontally polarized antenna.  See the BUX UNUN elsewhere on this page. ↓		↓
By combining a pair (two) of the single band HF Mobile (loaded) tuneable-tip antennas above, you can have an ideal, single element, horizontal dipole (beam). This type antenna opens the world of HF communications for the apartment dweller, RV HAM, field-day operating, and a variety of other uses and applications.  The packages described below include two antenna, the Double Antenna-Bracket (DBLBRKT), and mounting hardware.  $ 39.97 DBLSPCL (without BUX UNUN (ONION) With BALUN, see "DBLCOMBO", below. 75 Meters→,    40 Meters→,    20 Meters→, 17 Meters→,    15 Meters→,    10 Meters→,    6 Meters →
By combining a pair (two) of the single band HF Mobile (loaded) tuneable-tip antennas above, you can have an ideal, single element, horizontal dipole (beam). This type antenna opens the world of HF communications for the apartment dweller, RV HAM, field-day operating, and a variety of other uses and applications.  The package described here include: two antenna, the Double-Bracket (DBLBRKT), mounting hardware, and BUX BALUN (UNUN).    $AVE $$$$$,  BOTH, DPLSPCL & BUXUNUN,   for only $ 54.97, ORDER, DBLCOMBO  75 Meters→,   40 Meters→,   20 Meters→,  17 Meters→,   15 Meters→,   10 Meters→   6  Meters →
The Duplexer shown here is the ideal companion for our Dual-Band, Base Antennas  !  HF and VHF/UHF Antenna Duplexer  (Indoor use) Frequency: (Port 1) 1.3 - 225 MHz,  (Port 2) 350 - 540 MHz Power:       500 W 1.3 - 35 MHz,    300 W 50 - 540 MHz Insertion Loss: <0.2 dB Isolation: 60 dB;    VSWR: < 1.2:1 Combine HF/6m/2m output (Port 1) and your UHF output from your transceiver and send to one antenna.		$34.95  Order DU-500
QUAD MAGNET, Antenna Mount. Available in; Triple Chrome Plate, or Basic Black.  You asked for strength in a super mobile antenna mount, and WE DELIVERED !  Features 4,  five inch Heavy-Duty magnets, equally spaced on a Heavy Duty, 1/4" thick, hard-drawn metal frame.   The BUX4MM is prewired with 3/8" X 24 threaded (standard) Mount, and PL259 connector.  Accepts 3/8 X 24 antennas.		$44.97  BUX4MMC "chrome"    $44.97 BUX4MMB "Black"
Durable, light weight, 5/8 wave, high gain, two meter mobile antenna.  Fits 3/8" x 24 thread base, MA1034 mag mount shown next.  Includes cutting chart to cover 144 to 174 MHz. Also fits Heavy-duty, MAG mount MA1035, elsewhere on this page.	To attach to NMO mount, use NMO6 adapter shown at left.   5/8 wave, GAIN-type, two meter MOBILE antenna.   VH1210 complete with MA1034 MagMount, cable, and connector.     VH1210-MA1034	$15.95   VH1210  5/8 wave, GAIN-type, two meter MOBILE antenna only! Both Mount and Antenna $29.95 Antenna & MA1034 Mag Mount 29.95
"Super" Magnet 95 lb. pull strength. This powerful 5 inch magnet comes with 17 feet RG 58 coax with PL-259 connector. It has the standard antenna 3/8" X 24 female threads. A strong magnet mount for HAM type mobile antennas. Prewired with 17" RG58 cable PL-259 connector.	5" version  MA1035 = $14.95   3 " version  MA1034  $12.95	5" version  MA1035   $14.95         3 " version  MA1034 $12.95
3 inch, NMO Magnetic antenna mount. Black finish, and a good "grabber" to a smooth, flat, metal surface.   A good companion mount for the DB-2 shown near top of this page. Same as AM-1043B, except larger, 5 inch heavy-duty Magnet, w/coax and connector.	AM-1043B                                                                               AM-1045B	3"  $14.95 AM-1043B  5"  $17.95 AM-1045B
* Easy Mount Window Clip, No Holes *Low Profile Cellular Style * Includes 8ft Cable and SMA Connector * SMA CONNECTOR ADAPTOR NOW FITS LATE MODEL HT's * Molded Weather Proof Connections * Frequency Coverage 25 MHz to 1.2 GHz	WINDOW CLIP for  HT or SCANNER ANTENNA	SMA window antenna clip   $10.95  AM 800 BNC window antenna clip $11.95    AM 801B (antenna not included) Use antenna presently on your HT
Attach your HT or Scanner "duckie" to your hat, or a high place that enables greater distance.  Attach your handheld (HT) or Scanner duck antenna to this Clip Mount, connect the cable (SMA or BNC) to the handheld (or scanner), and then clip the antenna to your hat, coat, bike, etc. Includes 4 ft of RG-174 coax cable terminated in a SMA/BNC female.  SMA Hat Clip	SMA or BNC "HAT" Clip-on Mount (antenna not included) Use antenna presently on your HT	$10.95,  AM 550   BNC Hat Clip $11.95  AM 551
HR-601VU VHF & UHF Antenna Dual-Band, HandHeld antenna, with SMA male connector for use with late model transceivers.		12.95  HR-601VU
HR-601V is for VHF only handheld transceivers. Frequency: 144-148 MHz VSWR: Less than 1.8:1 Whip is Shape/Memory Alloy Connector: SMA Male		10.95  HR-601V
BUX COMM  Mobile Antenna Tuning Instructions;  www. BUX COMM.com  Setting the SWR: Insert your VHF or UHF antenna whip into the antenna ferrule or the adjustable slip at the top of the coil.  Using a good SWR meter, calibrate (set it up in the “forward power” position) it near the center of the band the antenna is designed for.  Switch back to SWR and record the readings.  These readings are made on three frequencies; one at the center of the band, then at the lower end of the band, and at the upper end of the band.   If the lowest SWR reading occurs at the low end of the band, the antenna whip/tip is to long and must be shortened.  Loosen the whip/tip set screws and lower the whip 1/4'' into the loading coil, or mast.  Tighten the set screw(s) and again read SWR.  Repeat until lowest SWR is obtained.  If the whip is fully lowered into mast and the SWR is still high, remove the whip from mast.  Using a grinder, bolt cutters, or hacksaw remove or cut ¼ inch from the bottom part of the whip.  Insert the whip back into the ferrule and again test the SWR.  Repeat the above procedure until the SWR is below 1.5:1 for the frequencies covered by the antenna.  If the lowest SWR reading occurs at the high end of the band, the antenna whip is to short and must be raised (lengthened).  Loosen the mast set screws and raise the whip ¼ inch,  tighten set screws and test the SWR again.  Repeat the above procedure until the VSWR is below 1.5 of all frequencies within the band you plan to operate.  ←Ferrule, with set screw(s) How low can we go?    Or  how low can the SWR be set? In a “perfect world” we would get the VSWR below 1.1:1, but in a practical installation, a 1.5:1 is considered ideal.  Some installations will not achieve a 1.1:1 VSWR because of conditions associated with environment or coaxial cable properties.   The losses associated with a 1.5:1 (using approximately 14 feet of coax) is actually less than one-half of one percent (1/2 of 1%) of your output power, which on a normal 5 watt radio means a loss of .025 watts of power.   In other words, instead of transmitting 5 watts output, you are actually transmitting only 4.975 watts.  For that reason, spending the extra time to get below 1.5:1 is a matter of personal preference, particularly if you have a high gain type antenna.     What happens if your SWR is 2.0:1 instead of 1.5:1 or less?  Most transceivers in use today have VSWR (viswar) protection circuits that decreases power output when the VSWR goes above 2.0:1.  Thus reducing the power out of the final power amplifier.  So generally, anything between 1.5:1 and 2.0:1 is acceptable, and useable for solid, and reliable communications.   VSWR readings of 3.0:1 or higher, usually point toward other problems in the system.
Trunk Lip Mount (ABS) with steel lip clamp and dual set-screws. Accepts antennas with standard 3/8" X 24 thread base.  Pre-wired with 17" of RG/58 to BNC Connector.  Black rubber paint protector, see photo.		With 17" of RG/58 to BNC Connector.  $6.97  TLMBNC include a PL-259 connector $7.97  TLMPL259  TLMPL259, we include PL 259 and 2 meter whip antenna  $9.97 TLM2MTR Same as TLMPL259, we include PL 259 and Dual-Band VHF/UHF ant.  $12.97  TLMDBANT
CX-201  Two position switch enables selection of one of two antennas with a single radio, or one of  2 radios with a single antenna.  Heavy-Duty, Die cast aluminum housing. Built to commercial standards.	Specifications: Frequency Range:  Up to, and including 600 MHz VSWR:  Below 1.2:1 Power Rating:  1.5 kW peak 1kW continuous Impedance:  50  Ohms Insertion loss:  Less than 0.2 dB. Port Isolation:  Better than 50 dB. Port connectors:  SO-239 One IN, Two Out May be configured Two IN, One Out. 2 Position Coax Switch	CX-201   $19.95
Antenna Coax Switch; 1  IN, 3 Out, in Metal case. Antenna Coax Switch; One IN, Three Out, or Three IN, and One OUT, 50 Ohm impedance, 3 port to 1 port Antenna Switch. Rated at 1 KW, SO-239 ports, mounted in metal case.		CX3 $9.95
HandHeld "HR-9" Duckie Frequency:  144 - 148 MHz SWR: Less than 1.5:1 Connector:  BNC Male Length:   4 inches, or 105/mm		9.95 HR-9
ANTENNA  INSULATORS For the apartment dweller, you can now hang the 20 meter doublet in the attic.   I've QSO'd with stations all over the world with the 33 ft dipole in my garage attic.   One insulator at the center, and one each end.  It's great for other HF WINDOM and single-band dipole antennas.  Dielectric strength is comparable to the old ceramic insulators, without susceptibility to cracking or breakage under impact or extreme temperature changes.	Weatherproof, (TENYTE) insulators.  Perfect for your DIPOLE or Windom antenna.	1 Insulator 1.10 each       Package of  3 for $2.99         Package of 10 for $ 8.99
NMO mount only.  For virgin installation when cable is already in place.  No cable,  only the NMO mount. Hardened Brass.	$4.95 NMO-2	$4.95 NMO-2
This NMO Hole Mount will fit into a 3/8" hole, or use the adapter (included) to adapt it to a 3/4" hole.  The BUX CommCo NMOH is supplied with 17 ft of 98% shielded RG-58 cable terminated into a PL-259 UHF connector.  Cables are attached at right angles to the mount.  Mounts also include a built-in seal around the mounting hole to protect from moisture.		AM-207B  $8.95
Transceiver Power Cables  Model CB-8 Our most popular Power Cable/Connector combo with dual, heavy duty (AGU), in-line fuse holders and fuses.  IN STOCK, Ready to ship	Kenwood TS-450, 2000 etc, Order CB-8 Icom 706 etc..     Order CB-8 ALINCO DX-70     Order CB-8 RCI-2970              Order CB-8 Various Yaesu & Icom (706 etc) transceivers (verify connector)	Regular. 24.95   $15.97 Order CB-8
NMO Mount RAIN CAP.   Used to cover the NMO mount when not in use.  Comes in basic gloss black.   YES, they are in Stock!  The NMO cover with built-in "0-Ring" seal.		.99 ea,  Order  NMO5
HOLE PLUGS Drilled the hole in the wrong place? Removed an old base-loaded antenna; This black rubber plug is inserted into the hole to seal from moisture. It can be painted to blend color. The profile is about 1/8 inch high when inserted,	HOLE  PLUGS	Plug for 3/8" hole .99 Plug for 1/2" hole .99   Plug for 5/8" hole .99   Plug for 3/4" hole .99   Plug for 7/8" hole .99   Plug for 1" hole .99
ANTENNA ADAPTER 3/8"x24 thread base antenna to NMO Mount When you don't care to drill another hole for that whip, or new antenna, this heavy-duty adapter mates a 3/8"x24 thread antenna base to an NMO mount.   Also includes "O" ring-to-body, seal to prevent moisture oxidation.	SIDE                    TOP              BOTTOM	NMO to 3/8x24 Antenna Adapter  NMO-6   $8.95
NMO to SO239 Antenna Adapter When you don't care to drill another hole for that whip, or new antenna, this heavy-duty adapter mates a SO-239 (PL259 type) antenna base to an NMO mount.  Also includes "O" ring-to-body, seal to prevent moisture oxidation.	BOTTOM                 SIDE           TOP	$8.95 NMO8
Trunk Lip, NMO Mount, model AM-209 is a trunk-lip mount supplied with 14 ft of RG-58 cable, a PL-259, and the industry standard NMO mount.  The AM-209 mounts on a standard trunk-lip and comes with 14ft of cable terminated in a PL-259.		AM-209 $11.95
Bumper Mount includes (SM1) SO-239 UHF connector to 3/8x24 antenna base (see SM1, this page). $7.95 ea	Included→	AM370RS
Insulated Antenna Stud Mount with SO-239 female connector for easy connecting with PL-259 fitting. Threaded for standard 3/8 X 24 mobile antenna use.		2.99 each   SM1   SM1X10  10,  for 17.95,
Mirror-Mount with insulated stud, for 3/8 X 24 thread medium duty mobile antenna mounting.	$6.95  Each	AM304S
Replacement, Hardened, Nylon, Heavy duty,  Shoulder washer insulators, same as shoulder washers in SM1 Stud-Mount.		4 for 99¢ SM1SW
VHF and UHF 'Cross-Needle' High Performance, SWR & POWER Meter. For the serious VHF/UHF operator, here is a 140 to 160 MHz & 440 to 480 MHz,  VSWR and POWER meter with; 10 - 100 - 1000 watt scales.		SWR-6  $69.95
SWR & WATT METER 100 watt & 10 watt level switch This is a handy, compact meter for designed for the amateur radio operator for checking transmitter operation, 1.7 to 50 MHz.  May also be used as a RF field strength meter and to check QRP power.		SWR-3,  $19.95
DUAL BAND, HIGH GAIN, BASE STATION ANTENNA, UVS-200   6.7 db @ 2 meters, 8.2db 70cm. High Performance, High Gain, Dual Band, Base Station Antenna 5/8 wave, vertical stacked collinear design 2-5/8 elements on 2mt., 4-5/8 elements on 70cm. 6.7 db @ 2 meters and 8.2 db 70cm. Superior wideband performance Heavy duty fiberglass radome Durable, waterproof joints Mounting Hardware included Accepts standard PL-259 connector 200 Watt power rating Radiating element, 100 inches. DC ground, enclosed elements reduces terrestrial noise. Reg $109.95 BUX COMM price, $57.97		$57.97 UVS-200
VH-2201 VHF BASE STATION Antenna. Frequency Range: 136-174 MHz Gain: 4.5dB VSWR less than 1.5:1 Power Rating: 200 watts Impedance: 50 Ohms Stainless Steel Radials SO-239 Input connector Radiating element Length 6 feet. Built to Commercial standards for base station installations, and  rugged, mountain-top repeater applications.  Mounting hardware and stainless-steel radials included.  Ship wt, 5 Lb		$47.97  VH-2201
UH-2401 UHF BASE STATION Antenna Frequency Range: 430-490 MHz Gain: 6.5dB Power Rating: 200 watts Impedance: 50 Ohms Stainless Steel Radials SO-239 Input connector Radiating element length 5 feet. Built to Commercial standards for base station installations, and rugged, mountain-top repeater applications. Mounting hardware and stainless-steel radials included. Ship wt, 5 Lb		$47.97 UH-2401
HIGH GAIN, BASE STATION ANTENNA 6.3 db, 136 MHz - 174 MHz. VHF 136-174 MHz  6dB Gain 5/8 over 5/8 Wave vertical stacked collinear design Radiating element, over 100 inches vertical length 2, -5/8 wavelength elements on 2 meters No cutting, Loosen lock-ring and set according to slide chart. 6.3 db @ 2 meters 5 MHz wideband performance Heavy duty, Stainless Steel Radials Three section, Hard-drawn aluminum radiator Durable, waterproof joints Mounting Hardware included Accepts standard PL-259 connector 200 Watt power rating	Shipping weight 5 lbs.	Reg $89.95 $39.97  BS-150
"Vertical" Six Meter Ground Plane All mounting hardware and assembly instructions are included.  Also includes cutting chart for exact frequency measurements.		Solid Elements Metal GP6M $49.95  Fiber Glass FGP6M $49.95
BUX stix  HF antennas (ABOVE) for Mobile and Base Applications:  Power Rated at 250 Watts P E P;   Typical 2:1.VSWR band width is: ·        75 meter: 40 KHz.         40 Meter: 60 KHz. ·        20 Meter: 150 KHz.      17 Meter: 175 KHz. ·        15 Meter: 200 KHz.      12 Meter: 300 KHz. ·        10 Meter: 500 KHz.        6  Meter: 1000 Khz. TUNING INSTRUCTIONS: Insert the whip into lower section ferrule about four inches (as shown at right) and tighten set screw.   Assemble with fiberglass lower section (as shown at left). Install a VSWR meter at the transceiver and apply 10 to 25 watts of power. Adjust the VSWR meter and output frequency for lowest VSWR reading, indicating resonance.  If resonant frequency is too high, loosen set screw and extend top whip until desired resonant frequency is found.  If  resonant frequency is too low, loosen set screw and adjust whip further into lower section.  For best results, adjustments should be made in small increments.  CAUTION:  If required, cut off the bottom of the whip to ensure it does not extend down into the coil of the antenna.  Failure to observe this precaution will cause heat damage and void any warranty.  At resonance, VSWR should be 1.5:1 or less when properly matched. When tuning is complete, tighten set screws securely.   NOTE: Bandwidth and VSWR will vary due to   mounting location.  If your installation has a VSWR over 1.5:1 at resonance, or you need to operate over a greater bandwidth a tuner may be required.

                     GOD Bless America                        A young (K4ABT) U S MARINE  1950

Web Page Design and HTML By G. E. 'Buck' Rogers Sr K4ABT d/b/a BUX CommCo™® ©  Copyright © 1995-2005 All Rights Reserved

®^tm