WELCOME TO ANOTHER WEB PAGE BY:
"Home of the RASCAL"
HAM RADIO (OnLine) SHOPPING 24 / 7 / 365 ¼ 1 BUX Drive; EVINGTON, VA 24550 FAX 434 525 7818
Antennas, Accessories, Connectors, and Components
BUX CommCO, RASCAL, and the RASCAL logo are registered trademarks of BUX CommCo Inc.Here's what our customers say about
BUX COMM & the RASCAL
From: harvey [K5PAX@]
Sent: Wednesday, July 28, 2004 10:45 AM
To: Bux Commco
Subject: RE: New Order with www.packetradio.com
Thanks Buck:
Just to let you know -- I've been using a BUX COMM, Rascal V on my first rig for about a year, and it works great. I'm a late blooming ham -- I learned CW from my Dad when I was 7, but didn't take the license test for 45 years. I expected to be working CW and Phone, but got on PSK a few weeks after I got on the air, and never looked back. I used the programs on your CD-ROM and have run successfully on BPSK31, QPSK31, PSK63, MFSK16, FeldHell, RTTY, FEC31, and a bunch more. I've spent 90% of my time on the soundboard digital modes and have been having a blast. They are the best thing for small stations with low power rigs and limited antenna systems. I've got DXCC and WAS in a year, primarily on the digital (PC soundcard) modes using a small mag-loop antenna (1 meter diameter) and less than 50 watts output. What can be better than that?
Quite honestly, if it wasn't for your website and the Rascal, I wouldn't have been half as active on the air. Some of the information/links on the website let me know just how simple the digital modes can be, and the plug and play RASCAL made it possible for someone like me. Other sites and books made the digital modes seem much to arcane, but your no-nonsense approach made it do-able for me.
The RASCAL V has worked flawlessly for a year, and I run an average of 2-3 hours every day. For the prices you charge, the product is an amazing bargain. I just ordered the RASCAL GLX for a new rig which is due in soon.
So I guess this is a fan letter -- I know I've been meaning to drop you a note on this for a bit; In any case, thanks again, I appreciate it.
Harvey
K5PAX
From: Kelly [KD7ALF@]
Sent: Wednesday, July 14, 2004: 6:43 AM
To: BUX COMM
Subject: Re: RASCAL GLX "Black Beauty"
Hello Buck and Company,
I wanted to drop you a note to tell you how happy I am with my RASCAL GLX “Black Beauty”.
First off, you and your crew did a STELLAR job getting my shipment out. I ordered on a Thursday afternoon and I received my package the following Monday. I tell ya’, you folks just DON’T mess around!
When I got my package inside and torn open, I couldn’t believe how quickly everything went together. I was up, running and receiving packets in about 15 minutes! Now I have a permanent station set up in my shack and I can send and receive APRS information to my heart’s content!
I only have one complaint…..
It’s going to take me a MONTH to go through all the software you sent on your CD! LOTS of really good stuff my friend, I discover something new and exciting every day.
Thank you so much for such a great product and fantastic service. I’ll be ordering another of these as soon as I have my second antenna in the air and know which rig I’m going with.
Wishing you all the very best!
Kelly ~ KD7ALF (Satisfied Bux Comm Customer!)
From: Allen, N1jXF
Sent: Monday, May 31, 2004 10:43 AM
To: buck4abt
Subject: Re: RASCAL CBL
Received cable within 4 days of ordering it. Very fast. Cable is very well built, works great on my old KDK radio & overall, I am very impressed by your professional service. I will recomend you to other ops. Thanks for a great product. It sure beats the old days of pinning out an old pc cable and wiring a mic plug to it.
Thanks again. Allen, N1jXF in RI.
From: KE5GBV - Scott
Sent: Friday, May 28, 2004 6:22 PM
To: [email protected]
Subject: Re: Order
To whom it may concern,
I appreciate ordering with your company, and to add to it, you were right on time with your estimation on the arrival. You were 100% correct on the Delivery Date, and the items I ordered is exactly what I wanted, and have received Very Good reports on its Performance. Just can't beat it. I appreciate your help. Next I will be ordering a Base Antenna.
I appreciate doing business with your company, and so far, I have Two other HAMS who will be ordering with you.
KE5GBV - Scott
From: Larry K0LEJ
Sent: Sunday, May 16, 2004 6:56 PM
To: Bux Commco
Subject: Re: Rascal GLX
Hi Buck:
Thanks for the fast service. I was not expecting such a fast response.
I just got done with my first FSK contact. Talk about fun! The RASCAL GLX interface works great and I had no problems setting it up. Setting up the computer, on the other hand, took a bit of playing (old IBM ThinkPad running Windows 98). My first contact was on the FT-817 set at 2.5W using a Hamstick dipole. I got a very good report into Florida. One of the best $40 I have spent!!!
Thanks for your help.
73 Larry K0LEJ
From: Terry VE3TKF
Sent: Wednesday, May 19, 2004 12:28 AM
To: [email protected]
Subject: Re: Rascal GLKit
Hello Buck:
Received my Rascal GLK last Fri. Went together in a flash, and It works great. I made my cables for my TS-570 and the Yaesu FT 8800 transceivers and all work okay. I usually use Digipan but I tried the Winpsk which came on the disc and it is a super nice program.
Thanks 73 Terry VE3TKF
From: Lee KD7OED
Sent: Monday, May 10, 2004 6:20 PM
To: 'buck4abt'
Subject: RASCAL GLX
Buck,
Received Saturday, on-the-air Saturday afternoon. - thanks for another great product!
73, de KD7OED
From: KE4QDC Ferrell
Sent: Thursday, May 13, 2004 10:02 PM
To: [email protected]
Subject: 746pro
Buck got the rascal hooked up and it works fine. On my 746Pro nothing to do but make the connections and settings. Works fine on HF as well as VHF 2 meter. Just thought I would let you know there was no special settings that had to be done. Have made several contacts already.
Thanks for a good product
73 KE4QDC Ferrell
From: Rick NK9G
Sent: Thursday, March 11, 2004 11:39 PM
To: Bux Commco
Subject: Rascal GLX
Buck
Just back from the Caribbean from HI, 8P, J3, V2, KP2, and /MM. The Rascal GLX is nothing less than outstanding.
I used PSK-31/ QRP with a FT-817. I have the competition, and after this trip... they are no competition
Rick NK9G
From: walt KJ4HE
Sent: Monday, November 17, 2003 10:07 AM
To: [email protected]
Subject: GLX Order
Dear Buck:
Last week I ordered a Rascal GLX with the matching cable for my IC-706MK2. Just as it was mentioned on your web page, my order shipped the next day. I received it 2 days later, installed it immediately, and watched it perform flawlessly from the get-go.
It is a pleasure to deal with someone who does what he says, and who ships product that performs as advertised. I am now on PSK31 ..... painlessly .... and loving every minute of it.
Thanks for the great service!
Walt KJ4HE
From: Troy
Sent: Saturday, October 04, 2003 6:05 PM
Subject: Good job!
To BUX COMM:
This new RASCAL mark V GLX is fantastic, I ordered one and five minutes after getting it I was on PSK31 receiving great reports, no mess, no fuss, no difficulty.
Didn't really have any doubts though as the original Rascal kit I'd put together before has been serving me well on my other radio for some time without any trouble.
Thanks for a great, reasonably priced, full featured product.
Troy
AB0YZ
From: Bob N2RXK
Sent: Thursday, August 07, 2003 11:52 AM
To: [email protected]
Subject: OrdersBuck:
I have placed several orders to your firm over the last few months.
Your equipment is exceptional, your shipping the fastest I have ever seen, your prices very good, and I refer you to other hams.
Thank for all you do, it is good to know SOME American businesses still carry on in the American Tradition!!!
TNX de N2RXK Bob
From: Tim
Sent: Thursday, July 30, 2003 3:46 PM
To: [email protected]
Subject: Rascal
I would just like to say what an absolute pleasure your product has been.
Simple to install - easy to use - and fantastic results.
I have been running BPSK31 for 5 days now - I have done over 90 QSO's on all but 1 continent.
In Ham radio there is much hype about products that general leads to customer dissatisfaction, however your product is out there leading the way to total customer satisfaction.
A very very sincere thank you from a happy customer.
Best wishes , Good Dx and keep up the good work
Tim A45WG - Muscat, Oman
From: wo4o
Sent: Sunday, July 20, 2003 10:38 AM
To: [email protected]
Subject: Re: Need RASCAL Mark V Plus in time for RTTY contest
Thanks, Buck. It arrived on time, in good shape and worked like a charm. This RASCAL helped me try RTTY for the first time in my 34 years in this hobby.
I Played in the NAQP RTTY and in 10 hours made 355 QSOs. It was great FUN.
Thanks for helping make it possible!
73 Ric Wo4o
From: Terry [TS128227@
Sent: Monday, March 10, 2003 8:49 PM
Subject: RASCAL Mark V Order
Importance: High
Just wanted to let you know, the RASCAL MARK V works GREAT! No problems hooking up to the Icom 706 and making contacts. Your fast service and quality product speak volumes!
Best 73, Terry - N4IYB
From: Wally ww4msk
Sent: Wednesday, February 12, 2003 3:25 PM
To: '[email protected]'
Subject: RE: Order
Hello....FYI, the order arrived and as you'd expect, all was set up and working in minutes. As a customer I truly appreciate items that are made easy to install, especially for a low time HAM.
Thanks....ww
From: Ed WD4GOY
Sent: Tuesday, January 14, 2003 10:56 AM
To: '[email protected]'
Subject: RASCALThanks. Received the Rascal Monday. Great turn-around time!
Had it up and running in 10 minutes. First QSO was with a YV.
Thank you for a great product.
Will certainly recommend you to all my friends interested in PSK and digi modes.Ed/WD4GOY
From: Bob N4HY
Sent: Tue 12/31/2002 5:55 PM
To: '[email protected]'
Subject: RASCAL
Buck:
I really like the new interface. I had it out of the box and running with all my radios in about
5 minutes. I really like the new RASCAL Mark V (RY) RTTY keying for my IC756Pro II.
Thanks for all your great work, at a great price.
Bob N4HY
From: Paul VE3HFQ
Sent: Tue 1/7/2003 2:59 PM
To: '[email protected]'
Subject: RASCALI wish to commend and thank you for your excellent service. Received the package in good order this afternoon. Great to see a firm that "thrives" on customer service. I shall be pleased to recommend your firm to other amateurs in the area. Keep up the excellent work!!!
Kind personal regards,
Paul (VE3HFQ)
From: Terry N8CDN
Sent: Thursday, December 05, 2002 9:02 AM
To: '[email protected]'
Subject: RASCAL mark V
Buck,
I just received my Rascal Mk V late Tues 12-3-02 and had it hooked up and working perfectly the next day after work. A few minor adjustments to the sound card settings is all it took. I had two quick PSK31 qso's on 20 meters and one station reported an IMD reading of -32 !. the Rascal appears to work on RTTY just fine as well. I was able to receive several stations and sent out a quick CQ and my signal sounded fine. Thanks for such a good quality product and excellent service. I will recommend your products to other hams,
73,
Terry N8CDN
From: Todd W4LA
Sent: Tuesday, November 05, 2002 9:02 AM
To: '[email protected]'
Subject: RASCAL mark V
It couldn't have been easier. In less than ten minutes I was on the air copying 20M PSK. Nice job on the construction Buck. Gotta go ! I want to operate more on this new exciting mode.
73's, Todd / W4LA
Newton, NC & Greer, SC
From: EDWARD N3JOX
Wednesday, July 31, 2002 10:33 AM
To: Bux Commco
Subject: Rascal
Buck: Just wanted to let you know I got my order yesterday, hooked it up with no problems made one CQ call on 20 Meters and got a reply. It works Great.
Thank You very much, I am one Happy customer.
Ed Mc Gowan
N3JOX
From: Malcolm Longland
Sent: Friday, July 19, 2002 2:47 PM
To: [email protected]
Subject: Thanks...
To all concerned.
I ordered a Rascal interface on Monday and amazingly it arrived here in Northern Ireland on Friday morning.
Needless to say it is installed and working 100%. Many thanks for the excellent service and good luck to you all.
73 de Malcolm Longland.
From: Alex, IK2XRW
Sent: Sunday, July 07, 2002 11:18 AM
To: Bux Commco
Subject: R: Order
TNX,
in reality I bought the RASCAL to run SSB & RTTY contest with Sound Blaster and pre-loaded messages as a DVK. First day all test works very fine... simple and easy to install.
Bye and see u soon on air.
IK2XRW, Alex.
From: M3RDXSent: Monday, July 01, 2002 1:35 PM
To: Bux Commco
Subject: Re: RASCAL RX, Par Avion
Hi Buck
I ordered my interface for the TS120s from you last monday it arrived in 1 week to the uk I connected up and was on the air within 5 minutes of the postman delivering !! it couldn't have been easier I worked hf0pol Antarctica with 5 watts psk31 also cuba and s. africa I am very pleased with your product and excellent service many thanks Ian M3RDX/QRP
p.s my friend was so impressed we ordered him one today thanks again Ian M3RDX/QRP
From: John, @ Springfield, VA
Sent: Sunday, June 30, 2002 4:40 PM
To: [email protected]
Subject: Rascal InterfaceI purchased the RASCAL two weeks ago and from the moment I opened it I knew I was going to enjoy it. It went together with out a hitch, as easy as the directions made it seem. Thanks for such a great product.
John H
From: Earl KE2DE
Sent: Thursday, June 27, 2002 2:54 PM
To: Bux Commco
Subject: Re: Rascal R-FTMDIN
Thanks Buck, for the pointers. I followed your advice and found that Win98 in the sound card was setup for desktop speakers and I am using a laptop so I changed it to laptop and now have sound out.
I set the levels in WinPSK and ALL Works Great!!
Thanks Again...Great Product, and Support
Earl
KE2DE
From: KA7EII Rocky
Sent: Sunday, June 02, 2002 1:41 AM
To: [email protected]
Subject: RASCAL R-FTMDIN Interface
Hello Buck,
Ordered my RASCAL on a Thursday and received it on Tuesday.
Finally got the computer out of the shop, and I have completed my first PSK31 QSO!
Your RASCAL works perfect with my FT-100D!
I've been having a ball on PSK31 and SSTV with help from your RASCAL!
Just want to thank you for making a great product that is easy to set up and use. The RASCAL will help me to explore yet another facet of Amateur Radio.
Your CD is also great, lots of info on it.
73 es C U later.
KA7EII-Rocky.
From Phil GU0SUP
Sent: Friday, May 24, 2002
Subject: the RASCAL R-5RY
Hi Buck,
Just been on air with the RASCAL R-5RY and it has performed very well indeed!
Had a QSO with 8P9AL and R1MVI on RTTY, and got through first call on each, so that can't be bad!An excellent piece of hardware, and it performs very well on all the soundcard modes that I use: RTTY (AFSK and FSK), PSK, MT63, Hell, Throb etc,
I had to check the right option in MMTTY when selecting FSK, else we get a single tone as well Tx'd, which seems to be due to the option of having SOUND + FSK checked.
Nice piece, and the speed of delivery was truly amazing!
Thanks for your prompt attention, and nice to do business with you.
Very best 73, and kind regards
Phil GU0SUP
UK
From Glenn KD5DGA
Sent: Sunday, April 14, 2002 6:39 PM
Subject: the rascal
Buck,
I have one of your rascals for about two years now and haven't any problems from the get go. I have been using mmsstv, mmtty, digipan, zakanaka, uiss with agwpe packet engine, and hamscope.
This little rascal has opened so many doors in amateur communication that gave a new life for me.
Thanks,
Glenn KD5DGA
From: Larry, KA4QZQ
Sent: Thursday, February 28, 2002 10:32 AM
Subject: R-TT5PD
The nice little RASCAL box arrived about 1/2 hour ago and the hook up was simple enough. Now I've gotten rid of all my jury rig cables and especially the noise I had before in my desk top speakers of my computer.
Thanks a lot for a fine and inexpensive unit for PSK. I'm back in business as I had just purchased my new
Ten-Tec Jupiter 538 and it's working just great.
Larry, KA4QZQ
From: Joe KC8RKL
Sent: Sunday, February 24, 2002 6:16 AM
To: [email protected]
Subject: RASCAL Kit
Buck-
Had to drop you a line. I ordered a RASCAL interface kit for my Kenwood TS-570 early last week and received it Friday. I assembled it yesterday (Saturday) a.m., loaded the WinPSK 2.11 software you *also* provided, poked around the software for a while, made the requisite adjustments (per your great advice), ..
....and my first PSK contact was Roger W2INY in Sarasota, FL in mid afternoon on 20 meters.
Later in the evening, after setting up some macros, I QSO`d Georg DJ9LJ (Germany) and Paul HA3HV (Hungary)- all on 35 watts and an attic dipole. Wow!
Having a blast. Thanks very much.
VY 73
Joe KC8RKL
From: M Wagner, K8SWL
Sent: Monday, February 11, 2002 5:29 PM
To: [email protected]
Subject: Received Rascal Kit –Thanks
Buck, Received Rascal Kit today.
Great service, mail money order to you on Monday, receive kit the next Monday.
It doesn't get any better!!!!
Thanks
Mike K8SWL
From: Ronald ke4vpn
Sent: Sunday, February 10, 2002 6:43 PM
To: [email protected]
Subject: Rascal came in and works FBHello Buck
Thanks for the quick shipping on the Ten Tec Pegasus Rascal interface, it works fine business. No problem at all with PSK31 or SSTV. I did not know the first thing about the modes and it was nice to get a product that works first time. I don't usually write vendors but I am so pleased with the product that I thought I would let you know.
73 de ke4vpnRonnie
-----Original Message-----
From: John--K3MZV
Sent: Saturday, February 02, 2002 10:42 AM
To: [email protected]
Subject: Good Job
Buck:
Received the Rascal R-5 Today --Great service.
The Rascal does a good job with my IC-735.
Thanks for a good product,
John--K3MZV
From: Brad, W4INT
Sent: Wednesday, January 30, 2002 6:51 PM
Subject: RE: RASCAL
Hello there,
Just though I would drop you a short note to say thank you for the great product!
I followed your instructions and even with the kids constantly asking questions had the
RASCAL kit together and working in less than 1.5 hours.
It works great as I have made numerous PSK31 contacts and now am working SSTV.
If I can ever be of a help to you in showing your product of giving a demo to HAMs in
my area please put my name on the list.
73 de W4INT
From: John, KE3QG
Sent: Tuesday, January 29, 2002 8:54 AM
To: '[email protected]'
Subject: good stuffI recently ordered a RASCAL for my ICOM 735, and your CD-ROM. The RASCAL hooked up very easily and the documentation was good.
With the programs on the CD-ROM, I didn't even have to download any software from the Internet.
As such, I was up and working both SSTV and PSK31 the day your shipment came (which was very prompt).
I highly recommend your products to anybody looking to get on the air quickly with these modes.
Thanks for the great products! John, KE3QG
From: W4MCQ
Sent: Saturday, January 26, 2002 2:37 AM
To: [email protected]
Subject: rascal interfaceI just received my Rascal. Hooked it up & works great ! Worth every penny !!!
Thanks ! Bruce W4MCQ
From: Roy
Sent: Saturday, January 12, 2002
To: [email protected]
Subject: Thanks for your quick shipment
Hello,
This is just a short note to tell you Thanks again for getting my order out so quick.
Last weekend I ordered one of your RASCAL's and it arrived this Friday evening. Got it hooked up and receiving Friday night. Finally found all the correct software menu settings (both radio and computer software) and made several PSK31 contacts today.
It works GREAT.
Thanks again,
Roy, K5RLE
I got it! Worked with so much ease I couldn't believe it. You have done a great job with the RASCAL.
I have placed you on my web sites as a featured link www.w2blc.com and www.txrad.net
73, and keep up the good work.
Bill W2BLC/WA4BLC
It is A O.K. You did a great job building my RASCAL. My age is 72 and I enjoy amateur radio.
Best wishes to you for the new year. 73 Chuck n4mis
From: Patrick
To: BUX CommCo
Subject: FT-817 interface issuesBuck, Just some feedback on your FT-817 interface.
I've been using it for a couple of weeks now and it works great, I did have a little trouble getting my FT-817 to modulate and had to adjust the level on the Rascal and set the sound card out level. I have built your interface for my ICOM 718 and did not have any problems.
From: Charles
Sent: Saturday, September 29, 2001 1:54 PM
To: [email protected]
I want to say that I enjoy psk31 very much and your RASCAL 5 makes it so easy!Thanks much,
Charles/W5CDS
From: Eric [kg4lul]
Sent: Thursday, September 13, 2001 2:38 AM
To: [email protected]
Subject: RASCAL - Thank You!Thank you for fulfilling my order so quickly! The RASCAL works great!!!!
From: MAC [w9iv]
Sent: Sunday, July 29, 2001 1:39 PM
To: Buck Rogers, K4ABT
Subject: RASCAL PSK INTERFACEThis is a "thank-you" message, Buck, to tell you that the RASCAL PSK interface which I ordered from you a few days ago has arrived, been installed, and is working perfectly. The promptness with which you responded to my initial inquiry, and the promptness with which you shipped the product, were truly impressive.
If you ever need a happy customer to recommend you and/or your products, just call on me; I'll respond in the same great fashion that you displayed to me!
73, MAC, W9IV
From: Gary
Sent: Tuesday, December 11, 2001 7:16 PM
To: [email protected]
Subject: RascalI wanted to let you know how great I think the rascal I purchased from you is. It was so easy to hook up and with the software you sent I had it up and running in less than 30 minutes. I will be purchasing more and recommending it to anyone wanting to get started with PSK31.
Thanks, 73
Gary
From: Art
Sent: Tuesday, November 27, 2001 9:18 AM
To: [email protected]
Subject: Re: OrderThank you! Order received and working well.
Very nice system you have developed. Installed easily and was up and running within minutes of arrival.
Thanks for such good service and a nice product!
Art K6ALC
From: G0NCS
Sent: Monday, November 12, 2001 11:01 AM
To: [email protected]
Subject: thankshello om thank you for the rascal unit which arrived safe and well, i was on the air within ten minutes working like a dream come true, a very nice bit of kit more than pleased hope to be in contact soon.
thanks a lot de g0ncs tim
From: Hesh
Sent: Tuesday, September 04, 2001 8:16 AMTo: 'BUX CommCo'
Subject: RASCAL
Hi… I received the ‘Rascal’ - it works great!
Thanks
Hesh N1MDX
Sent: Monday, December 31, 2001 4:27 AM
Subject: Happy holidays, TNX for everything in '01
Hi Buck:
I just wanted to say thanks all the good products and support
I'm using the PSK31 interface, it's working great. Your website is
great place to find all kinds of info.
Again thanks, happy holidays and may the good Lord take a liking to you!
Hank - N8DOE
Sent: Wednesday, October 10, 2001 3:02 PM
To: k4abt
Subject: HIHeard you on the air the other day. Condx were poor or I would have given you a call.
Love my RASCAL.
Bob, K6VIB
Quartz Hill, Ca.
Sent: Tuesday, December 11, 2001 8:07 PM
Subject: Praise
I just wanted to thank you for a wonderful product. I ordered your RASCAL
kit for my Kenwood TS-130 last week. I received it on Monday of this week
and already have it assembled and on the air.
73, Russ
.... and the list goes on... over 30,000 happy customers!
73 de
G. E. "Buck"
Rogers Sr.,
K4ABT
E-mail BucK4ABT
You are visitor number
,
to this page since January 2002
