If you would like instructions explaining how to setup the RASCAL and EchoLink to an Icom 706 and similar HF/VHF radios, send us an Email with your return Email address. We'll send the (pdf) file, return eMail CLICK HERE!

We Accept   Mail order or FAX form CLICK HERE! CLICK HERE to download RASCAL GLX to REPEATER interface Instructions via EchoLink

USB to SERIAL Adapter  OK, so you have a new PC with only a USB port, and no serial port....  Not so, any more.  BUX Comm has the answer.  This USB to Serial comport converter meets the specs shown below, and enables  you to operate the RASCAL© interface(s) from a PC USB port.  Also enables the use of TNC I/O and other serial comport devices. USB  V1.1 Compliant Supports Windows® 98/2000/ME and CLICK HERE to Download XP drivers Installation driver CD (included) installs serial port instantly Supports baud rates from 1,200 to 115,200 K Great addition for the new LapTop that came without a serial comport. Drives the BUX Comm RASCAL"© for Auto-PTT in PSK31. etc. USB2SC   We Accept   Mail order or FAX form CLICK HERE!

Our Lil Lite that we include with each RASCAL GLX. Additional lil lites are available at 99 cents each. Batteries are included. Perfect solution for finding the correct comport, or accessory jack on the dark sides of your PC or back of your transceiver. Also doubles as a sturdy "key-ring." LILITE LILITE
Cables and Accessories   IMPORTANT NOTE;  Prices of cable assemblies shown, do NOT include shipping & handling.   All orders are shipped within 24 hours of receiving, via USPS PRIORITY MAIL, FED-X Ground, or UPS.   Shipping & Handing added to each interface cable order: USA=$7.90, CANADA =$9.90, Foreign=$15.90 Below are cable assemblies you can use to make your  RASCAL GLX or TNC to Radio interface cables.
8 pin DIN male plug wired with 6 ft cable.  All 8 pins are connected, wires are color coded, and include one drain/shield wire.  For use with ICOM, and radios with 8 pin DIN accessory jacks. May also be used to interface KAM and KAM PLUS HF ports to various transceivers. ORDER 8D  $4.99
Make your own RASCAL GLX or TNC2 to Radio interface using this ready made cable.  The 5DMX cable is 6 feet long, the 5 pin (male) DIN and  3.5mm external speaker plug are already attached and wired to the 5 pin DIN.  All you add is the mating connector for the transceiver end.  The cable is prepped with 1/2 inch of each wire exposed, and 1/8 inch bare wire stripped and solder tinned for easy radio plug installation. Cable is almond color.    $4.97 each,  Order model 5DMX
This is our cable model "KVXT" which is used to make the TinyTrak, Kantronics VHF or 1200 baud cable, and in most cases, it may be used to fabricate the KAMxl cables. You add only the transceiver MIC or Accessory connector.  It is also used to make the Tiny-Trak interface cable.  All you add is the Radio or transceiver connector for the accessory, or Mic I/O.   4.97   KVXT Pre-Fab Cable,  diagram shown below.
SIX (6) foot shielded cable with all 8 wires attached to the 8 pin screw-on microphone connector.  Got a new "super-mic", or need to interface another device to the mic jack.... here's the solution. $4.99 each Order   8M
13 pin DIN male plug wired with 6 ft (straight) cable.  All 13 pins are connected, wires are color coded, and include one drain/shield wire.  For use with KENWOOD, ICOM, and radios with 13 pin DIN jacks.  $5.99 ea. ORDER No. 13D
Similar to above, except has 4 pin screw-on mic connector and curly cord. Curly cord extends to more than SIX (6) feet.  Shielded cable with 4 plus shield/drain wires attached to the 4 pin screw-on microphone connector. Got a new "super-mic", or need to interface another device to the mic jack.... here's the solution. $3.95 each, Model  4M
Microphone Extension Cables:  EX8  and  EX4: EX8 has 8 pin screw-on Male on one end, and 8 pin Female on the opposite end. EX8 extends to 8 feet. EX8,  9.97  _____________________________________________________________________ EX4 has 4 pin screw-on Male on one end, and 4 pin Female on the opposite end. EX4 extends to 4 feet. EX4,  8.97
AEA PK232 RAD1/RAD2 PREWIRED CABLE & CONNECTOR This cable is six (6') feet long, wired to the 5 pin molex type connector for AEA PK232 Radio ports. White wire = TX audio Bare wire  = Shield/Ground Red wire  = Push-To-Talk (PTT) Blue wire  = Receive Audio  Order Model  A232CBL   $3.99
CLICK HERE for MORE AUDIO CABLES & CONNECTORS
DIGITAL MULTIMETER Right Tech 9202. Here's a special deal on a digital multimeter.  Ideal for the HAM Radio Operator, or technician.  It has an LCD readout with 0.8" high digits. Features found on more expensive meters are standard on this DMM, they include: * A transistor and diode tester * An audible continuity checker. * Overload protection * Low battery indicator * Protective rubber case jacket. * Includes test leads and battery.     MORE ! Ranges to: 1000 Volts DC, 750 Volts AC, 10 Amps DC, Resistance to 2,000,000 Ohms   Order DMM $ 19.97
Our Lil Lite that we include with each RASCAL GLX. Additional lil lites are available at 99 cents each. Batteries are included. Perfect solution for finding the correct comport, or accessory jack on the dark sides of your PC or back of your transceiver. Also doubles as a sturdy "key-ring." LILITE      LILITE 8 pin DIN male plug wired with 6 ft cable.  All 8 pins are connected, wires are color coded, and include one drain/shield wire.  For use with ICOM, and radios with 8 pin DIN accessory jacks. May also be used to interface KAM and KAM PLUS HF ports to various transceivers. ORDER 8D  $4.99      Make your own RASCAL GLX or TNC2 to Radio interface using this ready made cable.  The 5DMX cable is 6 feet long, the 5 pin (male) DIN and  3.5mm external speaker plug are already attached and wired to the 5 pin DIN.  All you add is the mating connector for the transceiver end.  The cable is prepped with 1/2 inch of each wire exposed, and 1/8 inch bare wire stripped and solder tinned for easy radio plug installation. Cable is almond color.    $4.97 each,  Order model 5DMX    This is our cable model "KVXT" which is used to make the TinyTrak, Kantronics VHF or 1200 baud cable, and in some cases, may be used to fabricate the KAMxl cables. You add only the transceiver MIC or Accessory connector. It is also used to make the Tiny-Trak interface cable.  All you add is the Radio or transceiver connector for the accessory connector. Order KVXT 4.97      KVXT Pre-Fab Cable,  diagram shown below. SIX (6) foot shielded cable with all 8 wires attached to the 8 pin screw-on microphone connector. Got a new "super-mic", or need to interface another device to the mic jack.... here's the solution.     $4.99 each Order 8M    Similar to above, except has 4 pin screw-on mic connector and curly cord. Curly cord extends to more than SIX (6) feet.  Shielded cable with 4 plus shield/drain wires attached to the 4 pin screw-on microphone connector. Got a new "super-mic", or need to interface another device to the mic jack.... here's the solution. $3.95 each,   Order Model  4M  Microphone Extension Cables:  EX8  and  EX4: EX8 has 8 pin screw-on Male on one end, and 8 pin Female on the opposite end. EX8 extends to 8 feet. EX8,  9.97  _____________________________________________________________________ EX4 has 4 pin screw-on Male on one end, and 4 pin Female on the opposite end. EX4 extends to 4 feet. EX4,  8.97 13 pin DIN male plug wired with 6 ft (straight) cable.  All 13 pins are connected, wires are color coded, and include one drain/shield wire.  For use with KENWOOD, ICOM, and radios with 13 pin DIN jacks.  $5.99 ea. ORDER No. 13D     4 circuit, 3.5mm Plug and Coiled Cable For YAESU VX-1, VX-5, FT-10, FT-40, & FT-50, etc... Tip = 1 Ring  1 = 2 Ring  2 = 3 Sleeve = 4  Order Model. VX4 $4.97   The solution for TNC to H-T interfacing for mobile and portable APRS operation.  Of course, it makes a heavy-duty replacement cable for the Speaker-Mic.  Standard Mic/Earphone 2.5mm & 3.5mm molded plug spacing.  Easily extends more than six feet. Small tip = RED,  Small Sleeve=Shield/Black Large Tip = Yellow,    Large Sleeve = White  Order No. 34558   $4.97
Stereo "Y" connector, also works great with MONO applications, as "ring" is not used when connected into mono jack. Use with TNC / KPC/KAM when using external speaker jack.  Allows both the TNC and External Speaker for receive audio.   Order, YCONN 99 cents each   RASCAL & SOUND CARD uses 2, YCONN	Sound card six ft male to female stereo extender cables (1/8") or 3.5mm stereo male, to 3.5mm stereo female, shielded extension cable.  These are  6 ft, high-quality, stereo cables.  Great for sound card stereo extensions to RASCAL Line IN and Line OUT or MIC IN/SPKR OUT jacks. Order 35MFSTX  $1.49 each   Order 2 for sound card applications.
RASCAL TO PC EXTENDER KIT This cable kit allows you to space your PC and transceiver more than 15 feet apart.  This kit contains: One (1) db9 female, to db9 male cable 6 feet, serial comport cable,  and Two (2) 3.5mm stereo female to male, sound card cables. Combined with the 6 ft RASCAL to transceiver cables, and 6 ft, RASCAL GLX to PC cables, you can separate the radio and PC more than 15 feet. $3.99 Order Model  RXK    Add To Cart
Make your own CBL, using this ready made cable.  The 5DMX cable is 6 feet long, the 5 pin (male) DIN and  3.5mm external speaker plug are already attached and wired to the 5 pin DIN.  All you add is the mating connector for the transceiver/radio end of the cable.  The cable is already prepped with 1/2 inch of each wire exposed, and 1/8 inch bare wire stripped, and solder tinned for easy attaching to your radio mating plug.          $4.97 each,  Order model 5DMX Add To Cart
10 feet long, Category 5 Cable (Unshielded Twisted Pair) A multipair (usually 4 pair) high performance cable that consists of twisted pair conductors, used mainly for data transmission. Note: The twisting of the pairs gives the cable a certain amount of immunity from the infiltration of unwanted interference.  Basic cat 5 cable was designed for characteristics of up to 100 MHz. Category 5 cable is typically used for Ethernet networks running at 10 or 100 Mbps. Use for Mic Cable to Radios with RJ45 Mic I/O CAT5E10FT  2.99 Use with RJ45 Switch Box below. 10 feet long, Category 5 E Shielded Cable (enhanced/Shielded) Same as Category 5, except that it is made to somewhat more stringent standards The Category 5 E standard is now officially part of the 568A standard.  Category 5 E is recommended for all new installations, and was designed for transmission speeds of up to 1 gigabit per second (Gigabit Ethernet). Use for Mic Cable to Radios with RJ45 Mic I/O CAT5ES10FT  3.99 Use with RJ45 Switch Box below. RJ45 SWITCH BOX Switch between your RJ45 Mic and RASCAL GLX, Two RJ45 INPUTS with output to your transceiver.  Ideal For RASCAL GLX to radios with RJ45 (modular 8 pin) jack.  SSTV to MIC switching, etc. • Metal Casing, Fully Shielded • Rotary Switch for Extended use • All Female Connectors 8 pos, 8cond • Gold Plated Contacts Ensure Signal Integrity  • 14.97  Order RJ45SW1-2  $14.97 Order RJ45SW12 You can use this box to switch between four serial comports of your PC(s), or if you have only one serial comport, use the SW5 to switch between the RASCAL and other serial I/O devices. The SW5 is so versitle, it can be used as a monitor switchbox via the 15 pin I/O ports.  .Reg 44.95  BUX COMM price $ 19.99 INCLUDES 1 (FREE) RASCAL TO SW5 CABLE.  SW5,  $19.99 each  Five (5) pin DIN to 4 RCA male plugs.  36" shielded leads molded as one cable. RASCAL GLX Color Designators: Pin 1 to RED      = Transmit Audio Pin 2 to Shld     = Ground/Shield Pin 3 to Yellow  = PTT Pin 4 to Black   = Receive Audio Pin 5 to White   = RTTY or CW line*              *(depends on software) $14.97 5D4RCA ←See RASCAL notes at left. $9.97    5D4RCA Six (6) ft, 5 pin DIN, male to female cable.  This cable is used as an extension from the RASCAL GLX to the matching RASCAL to Radio CBL.   The BUX COMM 5D6MF has hundreds of other uses and applications.  $6.97   Order 5D6MF   ↓ ↓ 6.97   Order 5D6MF
Our Lil Lite that we include with each RASCAL GLX. Additional lil lites are available at 99 cents each.  Batteries are included.  Perfect solution for finding the correct comport, or accessory jack on the dark sides of your PC or back of your transceiver.   Also doubles as a sturdy "key-ring."    LILITE Add To Cart

Phone Orders:   10:00 AM to 4:00 PM (Eastern time, Monday thru Friday, Except HOLIDAYS.)      434-534-8873      Orders Only ! ALL ORDERS SHIPPED SAME DAY RECEIVED, except sunday and holidays.

When placing phone orders, have list of model numbers, descriptions, and credit card, (VISA, Discover, or MasterCard) information ready.   Please be sure to use correct "Ship-To" Address, ZIPcode, Callsign, and Phone number* (* UPS required).     ALL INFORMATION IS KEPT COMPLETELY CONFIDENTIAL, AND NO MAILING LISTS ARE SOLD, CONVEYED, OR OTHERWISE TRANSMITTED !

Our Shipping and Handling charges are based on the following table:

For shipments to destinations within the continental USA and CANADA
For Orders 0 to 2 pounds,        $7.90 added to total.
For Orders 2 to 5 pounds,        $9.90 added to total.
For Orders 5 to 10 pounds,      $11.90 added to total.
For Orders 10 to 20 pounds,    $15.90 added to total.
For Orders 20 to 55 pounds,    $28.90 added to total.

Foreign orders, 0 to 2 pounds, $15.90.   Sorry, due to loss and damage, No antennas shipped outside the continental USA