Interface cables "CBL" listed by radio make & model.  CLICK for specific radio section.

 

 

ALINCO          We Accept   Mail or FAX form CLICK HERE!
CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  →		Additional RASCAL to Radio CBLs are $19.97 Each.
CBL Number	Description    (Transceiver model)	Radio Jack/Port	YES, we have dealer quantity discounts !
CBL-AK8M	DX-77T,  DX-70TH,  DR-110T,  DR-130T,  DR-410T,  DR-510T,  DR.112T,  DR-570T,  DR-590, DR-592,  DR-599, DR-600,  DR-430T,  DR135T/EMKII,  DR-235T/TG,  DR-435T/TG,  DR-620T,  DR-M06TH,  DR-M03SX, ALR-22T,  ALR-22HT,  ALR-72T,  ALD-24T,
CBL-DJ25S	DJ-120,  DJ-160/460,  DJ-100,  DJ-120  DJ-200 DJ-500,  DJ-C1T,  C4T,  C5T,
CBL-20	Alinco Hand-Helds with 2.5mm & 3.5mm I/O DJ180/480,  DJ-196(DJ-195/296/496,  DJ-F1/F4,  DJ-S1/S4, DJ-160,  DJ-460,  DJ-162,  DJ-560,  ALM-203T,  ALR-206,  DJ-180T,   DJ-280T,   DJ-480T, DJ-580T,  DJ-191T,
CBL-AL45	DR-140,  DR-605,
CBL-AL6A	Alinco 8 pin screw-on mic with receive at pin 6 of Mic I/O. For ALINCO models: DX-77,  DR-119,  DR-1200
CBL AL135	Alinco DR-135 DataRadio
CBL MDIN	BUX NOTICE: Throughout our web pages, you'll see references to the 6 pin Mini DIN. This is the latest attempt by the ISO 9002 committee, to establish a "standard" for 1200 and 9600 baud I/O with PTT. If your radio has this jack as an I/O, this is the port to use for the digital modes, as it enables leaving your microphone connected. If your transceiver supports this 6 pin Mini DIN I/O, then consider using our cable model, "CBL MDIN" with the RASCAL GLX.  By using this jack you've enabled simultaneous use of the digital modes and voice operation.  (some transceivers require "menu selection" to activate this I/O).
BACK TO TOP
NOTICE:  For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s).  One Cable (CBL)  FREE with each RASCAL ordered.   Additional CBLs may be ordered via the SHOPPING CART @ $19.97 each.
AZDEN     We Accept   Mail or FAX form CLICK HERE!
CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  →		RASCAL to Radio CBLs are $19.97 Each.
CBL-MDIN	AZDEN 6 pin Mini DIN  for PCS 9000 Data Port
CBL AZMX	AZDEN transceivers with 8 pin screw-on mic and 3.5mm Ext Spkr plug
BACK TO TOP
COLLINS    We Accept   Mail or FAX form CLICK HERE!
To view diagram, click the shopping cart for that model. CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  →		Additional RASCAL to Radio CBLs are $19.97 Each.
CBL-75767	Transceivers with Patch IN, Patch OUT, and PTT RCA jacks
CBL-CW	RASCAL to transceiver cable for hard-keyed CW operating	CBL-CW is supplied with 3.5 and 1/4" plugs to CW jacks
BACK TO TOP
DRAKE      We Accept   Mail or FAX form CLICK HERE!
CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  →		Additional RASCAL to Radio CBLs are $19.97 Each.
CBL-TR7	DRAKE 4 pin screw-on mic with 3.5mm (1/8") Ext Spkr jack Models  TR-7 or TR-7/A, and some  TR-22, TR-33, TR-7, UV-3 radios
CBL-TT25	DRAKE TR-4, TR-4C, TR-4CW, and TR-6 radios.  Only  the standard 1/4 inch Stereo plugs are supplied!  SwitchCraft 230 (Collins) type 3-circuit MIC plug are NOT included.  Similar interface to Drake "TWINS." (R4B & TX4B)
CBL-CW	RASCAL to transceiver cable for hard-keyed CW operating	CBL-CW is supplied with 3.5 and 1/4" plugs to CW jacks
BACK TO TOP
ICOM   We Accept   Mail or FAX form CLICK HERE!
CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  →		Additional RASCAL to Radio CBLs are $19.97 Each.   Each $39.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).
CBL-IC8M	ICOM HF, VHF,/UHF Transceivers w/8 pin Screw-On MIC & Ext Spkr jack.      ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746,  756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics.  Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751,
CBL-IC8PD	ICOM  HF-, Transceivers with 8 pin DIN accessory jack ICOM Models:  IC-275, IC-475, IC-721, IC-723, IC-725, IC-726, IC-728, IC-729, IC-732, IC-735, IC-736, IC-737, IC-737A, IC-738, IC-746, IC-746,<HF>IC746PRO, IC-756, IC-756PRO, IC-756PROII, IC-760/Pro, IC-761, IC-765, IC-775, IC-775DSP, IC-780, IC-781, IC-820, IC-821H, IC-910H, IC-970E, IC-970H, IC-1275,  IC-2000 and other Icom transceivers with 8 pin DIN accessory I/O ports.  AND MORE !
CBL 746V	This RASCAL GLX to Transceiver uses both the 8 pin DIN and 7 pin DIN, of the 746 & 756 PRO series. This is a SPECIAL built cable for use with the Icom 746 & 756 series for use at VHF   (NOT HF).  Note price of this CBL is 19.95
CBL-IC13RY	ICOM   Transceivers with 13 pin DIN accessory jack w/ FSK pin. Wired for 160-6 meter (HF) use.   BEST CHOICE for Icom: IC-703, IC-706 mk II & IC-718;
CBL-IC13VU	ICOM  Transceivers with 13 pin DIN accessory jack wired for VHF/UHF operation   For Icom: IC-703, IC-706 mk II & IC-718; and ICOM transceivers with similar I/O jack.
CBL-MDIN	Six pin mini DIN (VHF) jack for the706 and, transceivers with this I/O  Most used for VHF operation with the 706 MK II, IC-207H and ICOMs with similar I/O
CBL-IC45	ICOM HF, VHF, and UHF transceivers with RJ-45 Modular Mic jacks ICOM models: IC-207H, 2720, 2800, 703, IC-706, IC-718, IC-V8000, IC-281, IC-381, IC-481, IC-681, IC-2000, IC-2100, 2350, 2340, and similar Icom I/O.  (Note: for 706 & 718, most ops prefer CBL IC13RY)
CBL-IC4M	ICOM HF-VHF Transceivers with 4 pin screw-on mic & Ext Spkr ICOM models IC-202, IC-215, IC-22S, IC-245, IC-280, IC-402, IC-502, etc...
CBL-20	ICOM, handheld transceiver(s) with 2.5mm & 3.5mm jacks  Icom W32A, W32E, IC-T7A, T7E, IC-T8A, T8E, and Icom Hand Helds with similar I/O. NOTE: Be sure your Hand-Held uses the same connector format: 2.5mm (TxAFSK/PTT) and 3.5mm (Rx AF).
CBL-CW	RASCAL to transceiver cable for hard-keyed CW operating	CBL-CW is supplied with 3.5 and 1/4" plugs to CW jacks
706 MK II G to RASCAL GLX enables HF, VHF, UHF, PSK, SSTV, Packet, RTTY/FSK..etc     $27.97 Built-in SPDTswitch enables switching between HF & VHF/UHF Special, Dual Purpose Cable is NOT included as a free CBL IC13HVURY
NOTICE:  For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s).  One Cable (CBL)  FREE with each RASCAL ordered.   Additional CBLs may be ordered via the SHOPPING CART @ $19.97 each.
CBL-QRP+	INDEX LABS "QRP+"
JST-245  (Japnese Radio Corp)      Mail or FAX form CLICK HERE! E!
CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  →		Additional RASCAL to Radio CBLs are $19.97 Each.
CBL-JST245	Japnese Radio Corp, model "JST-245"
BACK TO TOP
KENWOOD    We Accept   Mail or FAX form CLICK HERE! E!
CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  →		Additional RASCAL to Radio CBLs are $19.97 Each.
CBL-KW8M	KENWOOD Transceivers with 8 pin Screw-On mic & Ext Spkr I/O KENWOOD models: TM-201, TM-221, TM-231, TM-241, TM-2530, TM-401, TM-421, TM-431, TM-441, TM-531, TM-541, TM-621, TM-631, TM-701, TM-721, TM-731, TR-3200, TR-50, TS-50/S, TS-60, TS-751, TS-851, TS-140, TS-430, TS-440, TS-450, TS-660, TS-670, TS-680, TS-690, TS-701, TS-711, TS-780, TS-790, TS-811, TS-850, TS-870, TS-930, TS-940, TS-950, TW-4000, 4100, and Kenwood transceivers with 8 pin screw-on Mic connectors
CBL-KW13RY	Kenwood  Transceivers with 13 pin DIN accy jack. w/ FSK "pin."   YES, It includes TS-2000  TS-140, TS-450, TS-570, TS-670, TS-680, TS-690, TS-711, TS-790, TS-811, TS-850, TS-870, TS-950, and Kenwood transceivers with 13 pin DIN accessory jacks. Early Kenwood (940 & 440 below) transceivers with 13 pin DIN Accessory Jacks see CBL KW40-13   For TS-850 FSK operation, see CBL KW13RY"R"  below.
CBL-KW13RYR	Kenwood TS-850 and KW Transceivers with 13 pin DIN accy and "FSK RCA Jack"  For TS-850 Kenwood transceivers with 13 pin DIN and RTTY/FSK "RCA Jack".
CBL-KW4013	Early KENWOOD HF Transceivers with 13 pin DIN accessory jack   TS-940, 440..
CBL-MDIN	KENWOOD Transceivers with 6 pin mini DIN (ISO standard) jack (KENWOOD Models: TM-255, TM-455, TM-733, TM-833, TM-G707, TM-V7A,  TM-G 707A, (Delta) D-700 and transceivers with 6 pin mini DIN data I/O)
CBL-THF6	KENWOOD HandHeld Transceivers with 3.5mm & 2.5mm "stereo" I/O   (KENWOOD Models: TH-F6A, TH-F7E and transceivers with similar I/O)
CBL-026	KENWOOD TR-2600 HandHeld Transceivers with 3.5mm & 2.5mm   (KENWOOD Models: TR-2600 and transceivers with similar I/O)
CBL-KW45	KENWOOD HF and VHF Transceivers with (RJ45) MODULAR mic TM-251, TM-2400, TM-255, TM-261, TM-451, TM-455, TM-461, TM-643, TM-732, TM-733, TM-741, TM-742, TM-833, TM-841, TM-842, TM-941, TM-942, and Kenwoods with RJ45 mic jacks
CBL-KW4M	KENWOOD HF Transceivers w/4 pin screw-on mic & Ext Spkr jack TS-120, TS-130, TS-180, TS-311, TS-510, TS-511, TS-520, TS-530, TS-600, TS-700, TS-770, TS-801, TS-820, TS-830, TS-900, TX-310, TR-1300, TR-2200, TR-5200, TR-2300, TR-7010, TR-7200, TR-7400, TR-7500, TR-8000, TR-8200, TR-8300, and more)
CBL-KW5MX	Kenwood TR 7600, TR 7625 and Kenwoods with  with 5 pin Screw-On Mic and 3.5mm Ext Spkr jack.
CBL-KW6M	KENWOOD HF Transceivers with 6 pin screw-on mic & Ext Spkr jack TR-7730, TR-7750, TR-7800, TR-7850, TR-7930, TR-7950, TR-8400, TR-9000, TR-9130, TR-9500, and other Kenwood transceivers with 6 pin screw-on mic connectors
CBL-CW	RASCAL to transceiver cable for hard-keyed CW operating	CBL-CW is supplied with 3.5 and 1/4" plugs to CW jacks
NOTICE:  For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s).  One Cable (CBL)  FREE with each RASCAL ordered.   Additional CBLs may be ordered via the SHOPPING CART @ $19.97 each.
BACK TO TOP
KDK      We Accept   Mail or FAX form CLICK HERE!
CBL-KDK4MX	KDK Transceivers w/4 pin screw-on mic & Ext Spkr jack
BACK TO TOP
MIDLAND     We Accept   Mail or FAX form CLICK HERE!
CBL-MID4MX	Midland Transceivers w/4 pin screw-on mic & Ext Spkr jack
BACK TO TOP             If you don't see a cable (CBL) model for your transceiver, let us know, and we'll try to make it.
Radio Shack    We Accept   Mail or FAX form CLICK HERE!
CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  →		Additional RASCAL to Radio CBLs are $19.97 Each. Each $39.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).
CBL-HTX10	Radio Shack HTX-10
CBL-HTX100	Radio Shack Model HTX-100
CBL-HTX242	Radio Shack Model HTX-212, and HTX-242  or RS 45
CBL-HTX252	Radio Shack HTX-252
CBL-20	Radio Shack HTX-202 & HTX-404
NOTICE:  For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s).  One Cable (CBL)  FREE with each RASCAL ordered.   Additional CBLs may be ordered via the SHOPPING CART @ $19.97 each.
BACK TO TOP
RCI      We Accept   Mail or FAX form CLICK HERE!
CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  →		Additional RASCAL to Radio CBLs are $19.97 Each.   Each $39.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).
CBL-RCI6	RCI 5054 and RCI radios with 6 pin screw-on MIC This interface uses the 3.5mm external speaker jack for receive AF, and requires SwitchBox for SSTV.
BACK TO TOP
SBE   34     We Accept   Mail or FAX form CLICK HERE!
CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver		Additional RASCAL to Radio CBLs are $19.97 Each.
CBL-SBE34	SIDEBAND ENGINEERS model SBE 34 This interface provides open-end connection for the SBE34  external speaker screws..  Tx AF input and PTT is to the 1/4"  MIC jack.
NOTICE:  For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s).  One Cable (CBL)  FREE with each RASCAL ordered.   Additional CBLs may be ordered via the SHOPPING CART @ $19.97 each.
BACK TO TOP
SGC   We Accept   Mail or FAX form CLICK HERE!
CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver		AdditionalRASCAL to Radio CBLs are $19.97 Each.
CBL-2020	SGC model SG-2020 This interface uses the 3.5mm external speaker jack to extract receive audio.
BACK TO TOP
Ten Tec      We Accep   Mail or FAX form CLICK HERE!
CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver		Additional RASCAL to Radio CBLs are $19.97 Each.
CBL-5PD	Ten-Tec with 5 pin DIN data I/O accessory jack Ten-Tec PEGASUS,  Jupiter, (538),  and radios with similar 5 pin DIN data I/O. 5 pin (standard) DIN to 5 pin DIN.
CBL-ORION	Ten-Tec ORION (565) Ten-Tec Orion transceivers with AUX I/O, 8 pin DIN jack.
CBL-OMNI	For Ten-Tec transceivers with;  PTT,  Tx IN, Rx IN RCA jacks:  Ten-Tec OMNI V, & OMNI VI (Late Model Paragon, and Corsair) and transceivers with RCA jacks for ''Patch IN, Patch OUT, and PTT'' jacks.
CBL-TT25	Ten-Tec transceivers with 1/4 inch Mic and Ext Spkr jacks: Early Ten-Tec Triton 544,  Argonaut 505, 509, 515, (*early Omni V see late model; R-TTOMNI) below), and other Ten-Tec HF Transceivers with 1/4 inch Stereo Mic I/O and 1/4 inch mono external speaker jack.  NOTE: This interface cable works with other vintage transceivers; eg; Atlas, Swan,Drake, etc...
CBL-TT4M	Ten-Tec transceivers w/4 pin screw-on mic & 1/4" Ext Spkr I/O	with 1/4" Ext Spkr plug
CBL-CW	RASCAL to transceiver cable for hard-keyed CW operating	CBL-CW is supplied with 3.5 and 1/4" plugs to CW jacks
BACK TO TOP
UNIDEN     We Accept   Mail or FAX form CLICK HERE!
CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  →		Additional RASCAL to Radio CBLs are $19.97 Each.   Each $39.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).
CBL-UNIDEN5MX	UNIDEN and some HR2510  with 5 pin Screw-On Mic and Ext Spkr jack.
NOTICE:  For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s).  One Cable (CBL)  FREE with each RASCAL ordered.   Additional CBLs may be ordered via the SHOPPING CART @ $19.97 each.
BACK TO TOP
YAESU   We Accept   Mail or FAX form CLICK HERE!
CBL Model No.  ↓	DESCRIPTION, Make and Model of Transceiver ←One CBL FREE with each RASCAL GLX.  →		Additional RASCAL to Radio CBLs are $19.97 Each.   Each $39.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).
CBL-Y8M	YAESU transceivers with 8 pin (screw-on) mic input. Receive audio be taken from the external speaker jack.   YAESU models: FT-1, FT-77, FT-102, FT-107, FT-211, FT-290 MKII, FT-480, FT-690 MKII, FT-707S, FT-712, FT-726, FT-736, FT-747, FT-757, FT-767, FT-770, FT-840, FT-850, FT-790 MK II, FT-912, FT-980,  FT-990, FT-1000, FT-2200, FT-2700, FT-5100, FT-7200, FT-840, FT-890, FT-4700, FT-212, FT-ONE-S, FT-650, 707, 712, 726, 736, 756, 767, 77, 790II, 700, 840, 890, 990, 1000D  and MORE,
CBL-Y4M	YAESU transceivers with 4 pin (screw-on) mic input Receive audio is from the external speaker jack.   YAESU models: having 4 pin screw-on microphones.
CBL-MDIN	YAESU transceivers having a, 6 pin Mini DIN for data I/O YAESU  FT-817,  FT-100, FT-897, FT-1500, FT-3000, FT-8000, FT-8100, FT-8500, and FT-857   etc.. and   *FT-847 "VHF" port.
CBL-847HF	YAESU FT-847  3.5mm HF Data I/O HF jack For Yaesu FT-847 "HF"  Data Jack (*NOTE: see CBL MDIN for 847 VHF operation
CBL-FT600+	YAESU FT-736, FT-600, FT-890, & Late Model FT-900.  3.5mm HF Data I/O HF jack PTT  is via RCA "PTT" Jack.
CBL-YX	YAESU hand-held transceivers with 4 circuit, 3.5mm I/O jack. YAESU  FT-10, FT-40, FT-50, VX-1, VX-5, VX-150, and Yaesu handhelds with similar I/O.
CBL-FT2500	YAESU FT-2500M 2400 & Yaesu transceivers with similar I/O YAESU FT-2500, 2500M, 2400,  etc
CBL-FT2600	YAESU FT-2600 & Yaesu transceivers with   DB9f   I/O YAESU FT-2600, 2600M,  etc
CBL-FT2800	YAESU FT-2800 & Yaesu transceivers with   RJ 12 Mic & 3.5mm Ext Spkr  YAESU FT-2800, 2800M,  etc
CBL-75767	YAESU transceivers using the rear panel RCA jacks; YAESU FT-102, FT-757, FT-767, FT-920, etc
CBL-5PD	YAESU FT-1000"Mark V"  Transceiver PSK31 Interface   Use also with YAESU FT-920 (insure that data mode switch is in AFSK position)    SPECIAL NOTE: Use the FT1000 MkV, "EASY SET" to configure 5 pin DIN, Packet jack, for USB. For FSK/RTTY operation, Use cable CBL FT4RY  (see below, FSK only!)
CBL FT900/e	Early model YAESU FT-900 and Yaesu transceivers with similar I/0  For LATE model FT-900, see CBL F600 above. For FSK/RTTY operation, Use cable CBL FT4RY  (see below, FSK only!)
CBL FT990	YAESU FT-990 and Yaesu transceivers with similar I/0 For FSK/RTTY operation, Use cable CBL FT4RY  (see below, FSK only!)
CBL-1000D	YAESU FT-1000"D"  Transceiver PSK31 Interface cable "NOTE" Receive AF is at "RING" of 3.5mm plug. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)*
CBL-1000MP	YAESU FT-1000"MP"  Transceiver PSK31 Interface cable "NOTE" Receive AF is at "TIP" of 3.5mm plug. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)*
CBL-FT4RY	YAESU transceivers with 4 pin DIN RTTY jacks  NOTE:  This cable enables FSK/RTTY operation only.
CBL-20	YAESU  FT-51R & Yaesu handhelds with similar I/O Yaesu handheld transceiver(s) using similar 2.5mm (TxAFSK/PTT)  and 3.5mm (Rx AF) "mono" I/O
CBL-CW	RASCAL to transceiver cable for hard-keyed CW operating	CBL-CW is supplied with 3.5 and 1/4" plugs to CW jacks
NOTICE:  For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s).  One Cable (CBL)  FREE with each RASCAL ordered.   Additional CBLs may be ordered via the SHOPPING CART @ $19.97 each.
UP CLOSE AND PERSONAL:   Read this now ! When operating PSK31, SSTV, RTTY, etc using your PC sound card;  READ close and understand these digital operating rules.  You should always set the RASCAL and SoundCard gain (transmit) controls of your transceiver at 50% or less than half its rated power output.   Most HF transceivers are NOT rated for 100% duty cycle in key-down modes.  PSK31, SSTV, & RTTY are KEY DOWN modes.   I've learned this lesson long ago... the hard way.   These settings may change a small amount as you move from one band to another. When operating PSK31, SSTV, or RTTY/FSK on the HF bands: Don't use the audio speech processor, turn it OFF. Don't drive your transceiver into ALC action.   Don't run your transceiver at full RF output power, adjust output power to 50% or less of its rated power output.
The HF PSK31 frequencies are as follows: 160 meters - 1.807 80 meters - 3.580 40 meters - 7.070 30 meters - 10.140  20 meters - 14.070  Beginners, Start Here. 15 meters - 21.070 10 meters - 28.120 Operation of PSK31 is typically in USB mode, thus the actual operating frequencies will range from the lower frequency, upward by three (3) kHz.  In theory, this means that you can plunk a hundred, 31 Hz,  PSK31 signals into the same spectrum as one SSB signal might occupy.
RASCAL/MIC Switch for transceivers without an accessory jack.  EZ switch'n between MIC and RASCAL, Just Flip the switch.  It's great when operating SSTV, and modes requiring both voice and digital interaction.  The 5 pin DIN at "A" plugs into the RASCAL I/O jack, the Screw-On connector at "B" connects to the radio mic jack.  The 3.5mm (1/8") plug at "D" plugs into the (Ext Spkr) "Y" connector (included), and the Radio Microphone connects to the MIC jack at "C".  Overall length is nine (9') feet. Alinco 8 pin Screw On MIC      27.97  ARS8  Icom    8 pin Screw On MIC       27.97  IRS8   Icom    8 pin RJ45 MIC              27.97 IRS45  Kenwood  8 pin Screw On MIC 27.97   KRS8 Kenwood  4 pin Screw On MIC 27.97   KRS4 Yaesu 8 pin Screw On MIC       27.97   YRS8
 CLICK HERE to eMail us with special requests. Alinco 8 pin Screw On MIC        27.97  ARS8  Icom    8 pin Screw On MIC       27.97  IRS8   Icom    8 pin RJ45 MIC              27.97 IRS45  Kenwood  8 pin Screw On MIC  27.97   KRS8 Kenwood  4 pin Screw On MIC 27.97   KRS4 Yaesu 8 pin Screw On MIC         27.97   YRS8   We also "custom" build other RASCAL to TRANSCEIVER switches for specific model radios.  To check for possible availibility eMail us with your inquiry, include radio Make, Model, and Mic connector type.
So you bought one of those (brand X) interfaces that don't isolate the sound card receive audio (input/ Line IN). This ISOL8R will provide the isolation and help prevent HUM, they forgot to include. If you only order one, order it for the Sound Card LINE OUT, to protect your Transmit audio from HUM. ORDER 1, to isolate your transmit audio,   9.97  ISOL8R SAVE and buy 2, CBL-ISOL8R , Use one for Sound Card IN, and one for SoundCard OUT. ORDER 2, and save,                       17.97    ISOL8RX2

 

If you would like instructions explaining how to setup the RASCAL and EchoLink to an Icom 706 and similar HF/VHF radios, send us an Email with your return Email address. We'll send the (pdf) file, return eMail CLICK HERE!

We Accept   Mail order or FAX form CLICK HERE! CLICK HERE to download RASCAL GLX to REPEATER interface Instructions via EchoLink

USB to SERIAL Adapter  OK, so you have a new PC with only a USB port, and no serial port....  Not so, any more.  BUX Comm has the answer.  This USB to Serial comport converter meets the specs shown below, and enables  you to operate the RASCAL© interface(s) from a PC USB port.  Also enables the use of TNC I/O and other serial comport devices. USB  V1.1 Compliant Supports Windows® 98/2000/ME and CLICK HERE to Download XP drivers Installation driver CD (included) installs serial port instantly Supports baud rates from 1,200 to 115,200 K Great addition for the new LapTop that came without a serial comport. Drives the BUX Comm RASCAL"© for Auto-PTT in PSK31. etc. USB2SC   We Accept   Mail order or FAX form CLICK HERE!