www.BUXCOMM.com Digital Volt Meters for the HAM and two-way Radio technician


DMM 810 PocketCraft 810B. Here's a digital multimeter (DVM). Ideal for the Mountain-topper HAM Radio Operator, or technician. It has an LCD 3.5 digit readout Features found on more expensive meters are standard on this DVM, they include: * A transistor and diode tester * DC Amperes * AC Amperes * Overload protection * 7 functions & 19 Ranges * Includes 21" test leads and battery. Ranges to: 1000 Volts DC, 750 Volts AC, 10 Amps DC, Resistance to 2,000,000 Ohms		$ 9.95


A professional meter for measuring VSWR and POWER for a wide frequency range: The HP500 has a dual instrument window and positive press switches. Technical Specifications: * Frequency Range 3 - 200 MHz * Impedance 50 or 75 ohms. Accuracy � 10% * Power Measurements 10 W / 100 W / 1000 W * Wide band cover for both SWR and Power 3-200MHz. * Power up to 2Kw PEP plus 50-75 ohm switching. ZETAGI Order Cat # HP-500 $ 79.95 VHF and UHF 'Cross-Needle' High Performance, SWR & POWER Meter. For the serious VHF/UHF operator, here is a 140 to 160 MHz & 440 to 480 MHz, VSWR and POWER meter with; 10 - 100 - 1000 watt scales. SWR-6 $69.95
SWR & WATT METER 100 watt & 10 watt level switch This is a handy, compact meter designed for the amateur radio operator. Test antenna performance and transmitter operation, 1.7 to 50 MHz. May also be used as a RF field strength meter and to check QRP. SWR-3, $19.95
SWR: 1:1 to 1:3; RF Power: 0.5~10W; Accuracy: =SWR: +- 5% Power: +- 10%; Impedance: 52 W, Meter Sens. 200uA Freq. Range 1.7 to 30MHz QRP, SWR & POWER Meter, (0.5 to 10 watts) Freq. Range 1.7 to 30MHz SWR-2T, $12.99

ANT202 is a Base Station, (dipole) antenna for (HF) 20, 17, 15, 12, and 10 meters. We've also used it on 2 meters and 220 MHz with amazing success.
INCLUDES 2
end insulators.

A202 $27.95

←
For improved HF performance, we recommend our 101 BALUN (reg $ 19.95)
A202 & BALUN B101
SAVE $8.00, Order AB102
Both for $ 39.95
AB102

This 450 Ohm ladder line comprises poly-coated open wire. It is much easier to handle than open wire feeder yet retains its ultra low loss feature. This feed-line will handle 1 kilowatt with ease and is far superior to the 300 Ohm ribbon type.
100 feet   $ 19.95
Cat # 450LADR

50 feet    $ 11.95
Cat # 450LADR50

100 feet of RG-8U Low-Loss, Base-Station Coaxial Cable.   It's low loss design and 97% or better shield makes it ideal for this application. GOLD PL-259 coax connectors are installed on each end
50 feet of RG-8U with 97% shielding, Low-Loss, Base-Station Coaxial Cable.
ORDER: RG8PL1L
$39.97    Both ends are fitted with "GOLD" plated PL259/7506 connectors !
100 feet of RG-8U, with 97% shielding, Low-Loss Base-Station Coaxial Cable.
ORDER: RG8PL1C
$59.97

Number 14 TW/AWG with 41 strands of tinned copper wire, Poly-Vinyl insulation covered flexible, but strong. The most preferred wire type when building Dipole's, Windom's, and other flat-top HF antennas. The PVC insulation gives added strength to the 41 strands of tinned, copper wire. Specification: Finely stranded tinned copper conductor (Type III), 105�C   600 volt copper. 1.5lb/100 Color coded PVC insulation, Temperature range -20�C to 105�C, Voltage rating 600 volts, Reistant to Acid, Alkilis, Abrasion, Flame, Gasoline, Oil, Ozone, Moisture, Fungus.
100 ft, $19.95 10016 ;   200 ft, $38.95, 20016
300 ft, $57.95 30016 ;   400 ft, $76.95 40016

		ANT202 is a Base Station, (dipole) antenna for (HF) 20, 17, 15, 12, and 10 meters. We've also used it on 2 meters and 220 MHz with amazing success. INCLUDES 2 end insulators. A202 $27.95 ← For improved HF performance, we recommend our 101 BALUN (reg $ 19.95) A202 & BALUN B101 SAVE $8.00, Order AB102 Both for $ 39.95 AB102
This 450 Ohm ladder line comprises poly-coated open wire. It is much easier to handle than open wire feeder yet retains its ultra low loss feature. This feed-line will handle 1 kilowatt with ease and is far superior to the 300 Ohm ribbon type.		100 feet $ 19.95 Cat # 450LADR 50 feet $ 11.95 Cat # 450LADR50
	100 feet of RG-8U Low-Loss, Base-Station Coaxial Cable. It's low loss design and 97% or better shield makes it ideal for this application. GOLD PL-259 coax connectors are installed on each end	50 feet of RG-8U with 97% shielding, Low-Loss, Base-Station Coaxial Cable. ORDER: RG8PL1L $39.97 Both ends are fitted with "GOLD" plated PL259/7506 connectors ! 100 feet of RG-8U, with 97% shielding, Low-Loss Base-Station Coaxial Cable. ORDER: RG8PL1C $59.97
Number 14 TW/AWG with 41 strands of tinned copper wire, Poly-Vinyl insulation covered flexible, but strong. The most preferred wire type when building Dipole's, Windom's, and other flat-top HF antennas. The PVC insulation gives added strength to the 41 strands of tinned, copper wire. Specification: Finely stranded tinned copper conductor (Type III), 105�C 600 volt copper. 1.5lb/100 Color coded PVC insulation, Temperature range -20�C to 105�C, Voltage rating 600 volts, Reistant to Acid, Alkilis, Abrasion, Flame, Gasoline, Oil, Ozone, Moisture, Fungus. 100 ft, $19.95 10016 ; 200 ft, $38.95, 20016 300 ft, $57.95 30016 ; 400 ft, $76.95 40016