Serving Telecommunications and HAM Radio since 1969
Call our toll-free OrderLine: 1 866 300 1969 Monday > Friday 8:AM to 4:PM, Saturday & Sunday 12 noon to 5 pm ET
When calling the Toll Free number, be sure to have your Order numbers ready, All orders ship same business day
↓ Kwik Find Index↓
We Accept;![]()
NOTICE: We ship WINDOM and G5RV antennas worldwide, However; Due to excessive damage, we cannot ship HF Mobile or VHF Base antennas outside the continental USA !
Speakers, Transistors, EEPROMS, IC's, Opto-Couplers, RF PA Modules and More. The Ideal speaker for communications speech reproduction.
Wholesale priced from BUX Technologies;
$6.95 each
Frequency Response: 500 to 5000 Hz. 3.5 inch, Mylar-cone, eight watt, 8 ohm Extension Speaker with 6 ft cord and 3.5mm plug.Dealers, Call Jan @ 434 534 8873 for Dealer Discount.
Order SPKR35
6.95
Regular Price,
19.95Now $12.95 each
Extension Earphone - Headset, with lapel microphone 2.5mm and 3.5mm plug.Dealers, Call Jan @ 434 534 8873 for Dealer Discount.
12.95 ea
KENWOOD
order DM2
![]()
Alternating (rapid) attention getting, Ultra-Brite, flashing tiny LED assembly on a 0.42" diameter x 0.57" length (1/2 inch, approx) metal cylinder with removable magnetic keeper. Can be attached to clothing, earlobes, caps, as attention-getting jewelry, or use to augment signs or displays. Great for HAM fests. Includes two 736 button batteries.
Diameter is approximately 1/2 inchCAT# MAGFLSR
$1.00 each
XR-2212 The XR-2212 is an ultra-stable monolithic phase-locked
loop (PLL) system especially designed for commercial two-way and data communications and control system applications. Its on board reference and uncommitted operational amplifier, together with a typical temperature stability of better than 20ppm/�C, make it ideally suited for frequency synthesis, FM detection, and tracking filter applications.Primary use is 16 channel, frequency control in many GE, & Ericsson DELTA, RANGR, PHOENIX and similar two-way radios.
XR-2212 Prime, Tested, In stock, and ready to ship.
Order XR2212
29.97 each
2N7000 N-Channel Enhanced Mode Field Effect Transistors. These devices are used in many RASCAL GLX and GLK sound card interfaces, as they have been designed to minimize on-state resistance while providing rugged, reliable, and fast switching performance. They can be used in most applications requiring up to 400mA DC and can deliver pulsed currents up to 2A. These products are particularly suited for low voltage, low current applications. Because of their insulated gate feature, they also perform a measure of isolation between gate and source.
2/ .99, 2N7000 This transistor is used in some PSK31 circuits to activate transceiver PTT. Control of the PTT action is via software.
The same PTT feature is activated in SSTV/sound card software. 4 / .99 MPN2222
This device is designed as a general purpose amplifier and switch. The useful dynamic range extends to 100 mA as a switch and to 100 MHz as an amplifier. Employed in many PSK31 interfaces as the PTT switch.
2N3904 NPN Transistor with short, formed leads for Printed Circuit Board installation. 5 / .99, 2N3904S
YES, we have them, and SUCH a deal.
While others sell the MRF 515 at 5 times the price, we bought enough to get large, Quantity Discount.MRF 515 is an RF power transistor used in hundreds of Amateur Radio QRP projects, and used in many driver stages of other RF PAs. The MRF515 ratings are:
Type=NPN
Case=TO 39
18V @ 0 .15A
RF PO @7.5VDC - 470 MHz = 0.75W
Total Dissipation = 2.5 watt @ 470 MHz
Works great at HF, VHF, &-UHF.
Power out tests @ 13.5 V, @ 450 MHz; 1 watt.Reg price is $7.50The SRF 103 ratings are:
Type=NPN Silicon
Case=TO 46
18V @ 150 mA
RFPO @ 7.5VDC @ 450 MHz = .25 watt
Total Dissipation = 0.5 watt @ 470 MHz
Good driver/multiplier at HF, VHF, &-UHF.
2 for .99 SRF-103
460 - 512 MHz. 6.5 Watts @ 7.5 Volts
Primary use is UHF 5 watt output handhelds. Similar to RF PA module MHW-707-4 or GE 19A705419.Regular $57.00$4.99 each.GE p/n 19A705419.
5419P4,
M68702L RF power module for many Icom, Kenwood, Yaesu, Alinco, → more
VHF transceivers. 135-160MHz, 12.5V, 60W OutPut, FM mobile radio
39.95 each
10 for 297.97BUXPED6
Mounting of two-way radios, scanners, Sirrus satellite receivers, cellular phones, and many more applications.
BUX COMM HAM Radio six (6") inch pedestal mount with adjustable plate & base. Works great for radio mounting or mount upside down for use with XM Satellite Receivers. Thousands of other uses and applications.
$ 19.95
American Flag, BUX COMM PEN Has our name, address, and web page address embossed on it. Keep our web page address handy.
.99 Order BUXBPPOne FREE with orders of $100.00 or more
TOROIDS, FERRITES, and RFI SUPPESSORS Snap-Together Ferrite Choke
The Snap-on Ferrite Choke has proven to be an effective means of suppressing RFI in multi-conductor cables and wiring. EZ installation, just place these around the cable and snap together.
$3.97each 10 for 34.95Powdered Iron Composition material, recommended use in High Powered BALUNs. When you want to build a heavy-duty 4:1 or 1:1 BALUN, this is when we get serious about building those legal-limit 'Kick-Bootie' BALUNS. We reach for the bin with our 3001 dough-nutz in it. Outside diameter is 1 & 5/16 inches, and inside diameter is .75 (3/4) inch. If you're serious about building a BALUN that rocks, then stack a couple of these dough-nutz together and you're cook'n. Just don't dip it in your coffee, this dough-nut can ruin a good denture !!! 1.7 to 200 MHz. Ideal bobbin size. The heart of our 1.5kw, 4:1 BUX Balun.
$3.97 each 3001
1-1/2" OD, 7/8" ID, 5/8" H.
CAT# TOROID43
Special heavy white teflon coating helps prevents core saturation.
Your Price: 1.99 each
Quantity Discount,(TOROID43C)
100 @ $175.00In stock, ships within 24 hrs of order receipt.
CAT # TOROID43 Powdered Iron toroid is used to construct high powered BALUNs
1.99 each
These Ferrite bobbins are over 1.5 inches, and are the perfect size for Mini 8 Coax.
Use a stack of them to build your next 'Current' BALUN'
.99 ea, 6110 These Ferrite bobbins are 1/2 OD inches, and are the perfect size for stacking on RG-8X/Mini 8 Coax.
Use a stack of them to build your next 'Current' BALUN'
Use also to wind small baluns for interstage coupling or QRP BALUN's.
TOR30 30� each
TOR30X20 20 for $5.00
1 @ 30� each 20 for $5.00
![]()
These Ferrite bobbins are used in RF coupling stages and to make interstage matching transformers for many RF projects..
Use a stack of them to build your next 'Current' BALUN' using small coax, RG-58 or smaller.
TOR19 30� each
TOR19X20 20 for $5.00
1 @ 30� each 20 for $5.00
![]()
RF Choke, 1.5 uH, one inch long easily handles 500 mA.
$2 / .99, RFC15UH$2 / .99, RFC15UH .12uH RF chokes 5/.99 12UHRFC
UM-9401/MA-47266
PIN Diode, used in VHF & UHF transceiver Tx/Rx switching circuits..99 each UM9401
Original application as audio output (pair) for GE commercial two-way
radios. When heat-sinked, this 7 pin audio amplifier can deliver a whopping 7 to 10 watts of audio. A great replacement audio amplifier PA IC.TDA7240A .99 � each
Call it the, "OOPS" DC CONNECTOR !
Don't buy these to give a "color-blind" friend on April first...!! NOTICE !!! the connectors mate.... HOWEVER, !!! the polarity color rolls to the opposite line. These are polarized connectors, once installed in-line, can only be inserted one way. NOTICE, BE FORE-WARNED, these connectors are sold "as is" and we are not responsible if you fail to follow the wire/polarity path. USE AN OHMMETER TO VERIFY LEAD INTEGRITY!2 pair, $.99 (2 pair) OOPSCONN
600 to 600 ohm, 1:1 turns ratio
SubMinature audio coupling
transformer. Used in most PSK31 transceiver to sound-card interfaces to isolate the sound card and HF transceiver from RF feedback. Use two of these to isolate both the sound card LINE IN and LINE OUT from the transceiver accessory or data port. Primary is identified on transformer. Transformer measures approximately one half inch by one half inch. Leads are 1/2 inch long.
2/$3.99 XFMR6K6
1000 (1k) ohm to 8 ohm, SubMinature
audio transformer. Used in PSK31 transceiver to sound-card interfaces to isolate the sound card and HF transceiver from RF feedback. This 1K to 8 ohm transformer is used when external speaker audio is coupled to the sound card LINE IN. Primary (1000 ohm) and secondary (8 ohm) are identified on transformer. Transformer measures approximately one half inch by one half inch. Leads are 1/2 inch long.
2/$4.99 XFMR1K82/$4.99 XFMR1K8
600-600 ohm PHONE/DATA, HIGH QUALITY, TRANSFORMER 600 Ohms primary & secondary impedance. 1:1 turns ratio. DC resistance, primary/secondary: 63 Ohm/88 Ohm. Frequency response: 300-3500 Hz +/- 0.5dB. 1.02" x 0.91" x 0.78" high.
1.99 each XFMR115
![]()
1=n/c
Order DB9SS
2 = BLACK
3 = Brown
4 = RED (DTR)
5 = BARE (GROUND)
6 = YELLOW
7 = GREEN (RTS)
8 = BLUE
9 = n/c
6 ft shielded DB9 female,
pins 1 and 9 are NOT connected.
.99 ea. DB9SS
![]()
This PCB is the same PCB I use to construct the original PSK31 and SSTV sound card ISO- RASCAL. The ISO kits are used to interface your transceiver and PC SB-16 sound card for use with PSK31 and SSTV. USES 6 pin IC socket and 4N37 IC and two, XFMR6K6
99� ISO-PCB
![]()
Used in PSK31 transceiver to sound-card interface, this shielded, twin cable has two, 3.5mm stereo connectors on one end. When using with PSK31, SSTV, RTTY, and Packet Sound card interfaces, only the "tip" of each connector is used; The "ring" is not used. NOTE that a large ferrite core is molded into each line near the sound card end of the cable. This is another means of preventing noise and RF feedback between the transceiver and the PC sound card. Twin cable is four feet long. .99 � each SCABLE
.99 � each SCABLE
All purpose electrolytic. Great for adding filtering to the output of most 12 to 14 volt DC power supplies. Also filters wall-warts with less than 35 to 50 volts output.
Polarized, long lead is positive.
1000 uF @ 50 working Volts DC
2 for .99
1000U50V 2/.99
Wanna filter that 5 volt supply, or by-pass the 5 volt wall wart. Observe working voltage.
Polarized, long lead is positive.
2 for .99
2200U63V 2 for .99
All purpose electrolytic 470 uF @ 16 W VDC
Polarized, long lead is positive.
2 for .99
2 for .99 Single Pole, Single Throw,
Slide switch. 2 for .99
2 for .9910K pot with On/Off switch. Shaft is 1/4". Comes complete with knob and mounting hardware.
99 � each
10KWKNOB99 � each
10KWKNOB
This case is made of durable plastic and is the same enclosure I use to house the original PSK31 and SSTV ISO-KIT interface projects. When completed, the 2" x 2" circuit board, PSK31 interface fits easily into this project box. All sides and surfaces are smooth and the ''Live-Hinge'' lid has an easy open internal snap-lock. The snap-lock allows easy access to set internal pots and/or controls. 3-1/2"x2-1/2"x1-1/4". Made In the USA, exclusively for BUX CommCo
99� each Model BLACKBOX
10 for $7.95 Model BLACKBOX10
20 for $9.95 each Model BLACKBOX2010 K pot for audio level control in PSK31 and SSTV interface circuits where transceiver (input & output) jack(s) to sound-card I/O is required.
Ergonomic Wire Cutter cuts flush with minimal effort.
Xuron Flush Cutter employs bypass cutting, which produces clean, square cut using shear action. Ergonomically designed cutter features angled head and contoured, non-slip, soft rubber grips. Equipped with Light Touch� return spring, product employs slim profile head that lets users see wire being cut. Lightweight (2 oz) tool. Black finish and hardened alloy steel.
Always wear eye protection when cutting wire. also offers glare-eliminating Reg $ 7.95 BUX COMM price is 2.88Reg $ 7.95BUX COMM price $ 2.88
Order XFLUSHCUTR
One Lb. roll of 60/40 rosin core solder manufactured by Alpha. .02 diameter.
Each roll contains 1 pound of 60/40, Rosin Core, Electronics Solder.
Number 22 size (.022). The perfect size for both SMT and mini-component installation and applications.
One pound, .022 Diameter, 60/40 ROSIN CORE SOLDER8.99 order LBSOLDER
One pound, .022 Diameter, 60/40 ROSIN CORE SOLDER
8.99 order # LBSOLDER
Each tube contains 110 Inches of 60/40, Rosin Core, Electronics Solder. Always looking for that elusive piece of solder.... keep several of these tubes nearby. They're easy to spot with the bright yellow top. 110 Inches, .04 Diameter, 60/40 ROSIN CORE SOLDER
99 cents each 'SOLDER'99 cents each 'SOLDER'
SOLDER WICK
Remove solder from boards, parts, pants, etc. Heat the soldering iron, put the wick on the solder, and bingo, its gone. 5 feet of 2mm solder wick.DESOLDERING BRAID
Order DESOLDER .99
length: 5 ft
POWERFUL DESOLDERING PUMP
FeaturesTEFLON-nozzle length: 10.8"
CLEAR LENSE when off, and Brite "Red" when ON. Order REDLED 5 for 99�
Voltage:
1.5V
Chemistry:
Alkaline
Dimensions:
.457" D x .213" H
Button Batteries, Ideal for the following:
- Pocket, KeyChain Lites- Small Flashlites, - Laser pointers -Watches, - Cameras
- Alarm transmitter, - Rescue, - Children Books,- Caluculators, - Blood Pressure Instrument - Sugar Level Detectors Set of 4 for 99 cents AG13
UM-9401/MA-47266 PIN Diode, used in VHF & UHF transceiver Tx/Rx switching circuits.
.99 each UM9401Supports Windows� 98/2000/ME and
CLICK HERE to Download XP drivers Installation driver CD (included) installs serial port instantly Supports baud rates from 1,200 to 115,200 K Great addition for the new LapTop that came without a serial comport. Drives the BUX Comm RASCAL"� for Auto-PTT in PSK31. etc. ADD A SERIAL (comport) to your PC or laptop without removing it from the case. $19.95 each ORDER No. USB2SC$19.95 each USB2SC
USB Cable, Male Type A to Male Type B, 6 feet long, 6 foot, USB CABLE standard A-B USB interface cable for printers, and other USB to PC applications.Shielded with internal "drain wire."
1.99 USB6F ↓Five (5) pin DIN to 4 RCA male plugs. 36" shielded leads molded as one cable.
RASCAL GLX Color Designators:
Pin 1 to RED = Transmit Audio
Pin 2 to Shld = Ground/Shield
Pin 3 to Yellow = PTT
Pin 4 to Black = Receive Audio
Pin 5 to White = RTTY or CW line*
*(depends on software)
$9.97 5D4RCASix (6) ft, 5 pin DIN, male to female cable. This cable is used as an extension from the RASCAL GLX to the matching RASCAL to Radio CBL. The BUX COMM 5D6MF has hundreds of other uses and applications. $6.97 Order 5D6MF ↓
↓ 6.97 Order 5D6MF
Microphone Extension Cables
EX8 has 8 pin screw-on Male on one end, and 8 pin Female on the opposite end. EX8 extends to 8 feet. EX8 9.90
EX4 has 4 pin screw-on Male on one end, and 4 pin Female on the opposite end. EX4 extends to 4 feet. EX4 8.90EX8 Mic Extender
Quarter-inch, mono plug is often used for head phone connections and external speaker plug. Known as the 1/4 inch mono plug. 25MONO $1.00
Quarter-inch Stereo plug is often used in High Power Audio systems. The 1/4 inch stereo plug is also used as Microphone input and PTT for some Collins, Drake, Heath, Ten-Tec, etc... transceivers.
Order No. 25SMIC $1.252.5mm Mono Plug # 25MP $ 0.45 ea
3 for .99
EACH 2.5mm Stereo Plug # 25SP $0.65 ea
3 for .99
EACH 3.5mm Mono Plug (1/8inch) 35MP $0.75
3 for .99
EACH 3.5mm Stereo Plug (1/8inch) 35SP $0.85
3 for .99
EACH 3.5mm Stereo jack. Although made for PC board mounting, They may also be used to make "in-line" jacks for sound-card applications. $0.75ea order 35PCBJAK
6 PIN MINI DIN JACK
This is the same type female connector used as the ISO standard I/O on many late model transceivers. Has PCB pins, or can be soldered to to make extension cables. 99� each, MDIN6JAK
SIX pin "Mini" DIN Plug (MALE)
Used as accessory plug to interface data input and output on many transceivers. e.g. PSK31 I/O
$1.50 each Order # 6PDMDIN
Male, 6 pin mini DIN with cable attached. Used with most transceivers having the ISO "standard" data input/output jacks. All wires are color coded for easy signal routing. $1.99 each Order 6MDN ↓
5 ft cable, wired to 4 pin DIN male connector. Pin 4 is bare/shield/ground.
1=White
2=Blue
3=Red
4=BARE/Shield Order 4D @ $4.994D @ $4.99
5 pin DIN cable pre-wired with all 5 pins connected, with shield and drain wire. This cable is used to interface RASCAL GLX to PC sound card & Radio. Also mates the 5 pin I/O jack on most TNCees. 6 feet, All wires are color coded.With 5 ft shielded cable, wired to 5 pin DIN male connector. Order 5D @ $1.99
5D @ $1.99
5 pin DIN Chassi Mount Female
5DCMF, Female 5 pin DIN jack may be panel mounted, or combined with another similar connector to form an in-line adapter cable. 5DPCF is same except is for PC board mount. .79 ea Order 5DCMF5DCMF
5 pin DIN InLine Female.
$1.99 order 5PDFIL
$1.99 order 5PDFIL 5 pin DIN Printed Circuit board mount. 5DCMF, Female 5 pin DIN jack may be panel mounted, or combined with another similar connector to form an in-line adapter cable. 5DPCF is same except is for PC board mount. .97 ea Order 5DPCF
.97 ea Order 5DPCF
That AEA PK232 plug that is so hard to find....
BUX COMM has them in stock! Plug for the AEA PK-232 TNC. Order 232F5, 2 for 99 centsYES, we also have the male counterpart (jack) to the above "female" plug. Make an extension, or buy both parts (see insert), and mate for other connector applications. 2 for 99 cents, Order 232M5
RJ45 Plug 4/$1.00 ea. Order RJ45P
![]()
RJ45 SWITCH BOX
Switch between your RJ45 Mic and RASCAL GLX, Two RJ45 INPUTS with output to your transceiver. Ideal For RASCAL GLX to radios with RJ45 (modular 8 pin) jack. SSTV to MIC switching, etc.
� Metal Casing, Fully Shielded
� Rotary Switch for Extended use
� All Female Connectors 8 pos, 8cond
� Gold Plated Contacts Ensure Signal Integrity � Order RJ45SW1-2Order RJ45SW1-2
shielded cable, wired to 7 pin DIN male connector. Order 7D @ $4.99
Standard 8 pin DIN Plug with 5 ft cable, wired for ICOM 8 pin accessory jack, All 8 pins have wires, and color coded.
ORDER 8D @ $4.99Used in PSK31 transceiver to sound-card interface, this shielded, twin cable has two, 3.5mm stereo connectors on one end. When using with PSK31, SSTV, RTTY, and Packet Sound card interfaces, only the "tip" of each connector is used; The "ring" is not used. NOTE that a large ferrite core is molded into each line near the sound card end of the cable. This is another means of preventing noise and RF feedback. Twin cable is four feet long. .99 � each SCABLE
Sound card six ft male to female stereo extender cables (1/8") or 3.5mm stereo male, to 3.5mm stereo female, shielded extension cable. These are 6 ft, high-quality, stereo cables. Great for sound card stereo extensions to RASCAL Line IN and Line OUT or MIC IN/SPKR OUT jacks. 35MFSTX2
$2.99 /set of 2.RASCAL EXTENDER KIT Combined with the 6 ft RASCAL to transceiver cables, and 6 ft, RASCAL GLX to PC cables, this kit adds another 6 feet, allowing you to separate your transceiver and PC more than 15 feet apart. This kit contains:
One (1) db9 female, to db9 male cable 6 feet, serial comport cable, & Two (2) 3.5mm stereo female to male, 6 feet, sound card cables. 4.99 Order Model RXK8 pin DIN male plug wired with 6 ft cable. All 8 pins are connected, wires are color coded, and include one drain/shield wire. For use with ICOM, and radios with 8 pin DIN accessory jacks. May also be used to interface KAM and KAM PLUS HF ports to various transceivers. $4.90 ea. ORDER No. 8D
See cable diagram and wire color codes below.
↓Make your own CBL, using this ready made cable. The 5DMX cable is 6 feet long, the 5 pin (male) DIN and 3.5mm external speaker plug are already attached and wired to the 5 pin DIN. All you add is the mating connector for the transceiver/radio end of the cable. The cable is already prepped with 1/2 inch of each wire exposed, and 1/8 inch bare wire stripped, and solder tinned for easy attaching to your radio mating plug.
$4.90 each, model 5DMXSee cable diagram and wire color codes below.
↓5DMX
SIX (6) foot shielded cable with all 8 wires attached to the 8 pin screw-on microphone connector. Got a new "super-mic", or need to interface another device to the mic jack.... here's the solution. $4.90 each, Order Model 8M
See cable diagram and wire color codes below.
↓
PLUG & JACK COMBO PJ25
High Quality at half the price ! 1/4 inch Stereo, Plug & Jack set. Complete with all mounting hardware. Jacks are "closed-circuit" type, however they may be wired configured as; Mono, Stereo, or Open-Circuit. set (Plug & Jack) $3.99
CLICK HERE for → Solutions and Cures for Sound Card Hum Problems |
NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered. Additional CBLs may be ordered via the SHOPPING CART @ $19.97 each. |
So you bought
one of those (brand X) interfaces that do not isolate the sound
card receive audio (input/ Line IN). This ISOL8R will provide the isolation and help prevent HUM, they forgot to include. ![]() If you only order one, order it for the Sound Card LINE OUT, to protect your Transmit audio from HUM. ORDER 1, to isolate your transmit audio, 9.97 ISOL8R ![]() SAVE and buy 2,
CBL-ISOL8R , Use one for Sound Card IN, and one for SoundCard OUT. |
Power line Surge & Spike
Suppressor, with three Outlets,
and all three are MOV
protected.
"Don't plug it in without protection !"
Lightning and power surges can permanently ruin your electronic equipment.� Changes in voltage can cause lockups and loss of work and data.� This device will protect your equipment from the threat of bad power. This Surge Arrestor offers a great value for high-end home and business equipment applications such as home and office computers, expensive HAM gear, high-performance stereo equipment, printers, appliances, televisions and more.
GOD Bless America
A young (K4ABT) U S MARINE 1950
OPTO-Isolators &
Photo-Darlingtons
Back To Top |
||
Part # |
3 for .99 |
20 for $4.99 |
4N25 |
||
4N26 |
||
4N27 |
||
4N28 |
||
---|---|---|
4N29 |
||
4N30 & 4N31 |
||
4N32 & 4N33 |
||
4N35 |
||
4N36 |
||
4N37 |
||
CNY17 |
||
CNY75B |
||
CNX35 |
||
CNY36 |
||
H11B |
||
H11D |
||
MCA2230 |
||
MCA2231 |
||
MCA2255 |
||
MCL2501 |
||
MCL2601 |
||
MCL2530 |
||
MCL2730 |
||
MCL2731 |
||
MCP3030 |
||
MCS2 |
||
MCS21 |
||
MCS22 |
||
MCS2241 |
||
MCS2401 |
||
MCS6201 |
||
MCT26 |
||
MCT270 |
||
MCT273 |
||
MCT274 |
||
MCT2201 |
||
Part # |
3 for .99 |
20 for $4.99 |
|
|
|
|
![]() |
2N5033
used in opto isolator circuits as darlington add-on to support relay
switching radios that draw more current than the OptoCoupler rating.
2/.99 |
Phone Orders: 24/7 Call Toll FREEOrders Only 866 300 1969 Orders Only |
We Accept
FAX or Mail order form, Click Here!
BUX COMM corp.
Order Line, Mon > Fri 10 AM to 4 PM, 1 4 3 4 5 3 4 88 73 or FAX your order, 24/7 to FAX 1 434 525 7818
All text and graphics on these pages are ��� of G. E. Rogers Sr and BUX COMM Corp 1986 - 2005
CLICK HERE to download RASCAL GLX to REPEATER interface Instructions via EchoLink
Shipping/Handling & warranty Return
policy
* "RASCAL"
is Registered trademark �� of BUX Communications Corp (BUX CommCo �)
*(RASCAL��
"Radio
And
Sound
Card
Adapter
Link")