www.BUXCOMM.com RASCAL PSK31 soundcard KIT Home Page.

Serving Telecommunications and HAM Radio since 1969
Call our toll-free OrderLine: 1 866 300 1969 Monday > Friday 9:AM to 4:PM, Saturday & Sunday 12 noon to 5 pm ET
When calling the Toll Free number, be sure to have your Order numbers ready, All orders ship same business day
↓ Kwik Find Index↓

We Accept;
NOTICE: We ship WINDOM and G5RV antennas worldwide, However; Due to excessive damage, we cannot ship HF Mobile or VHF Base antennas outside the continental USA !

RASCAL GLX KIT

The following is reprinted with permission, courtesy CQ Magazine, page 73, February 2005
(from "DIGITAL" by Don Rotolo, N2IRZ"

Dealer Orders Line, Monday thru Friday, 10 AM to 4 PM, 1 434 534 8873
FAX orders, → ANYTIME (24/7), to BUX COMM → 1 434 525 7818

When placing phone orders, choose the cable model number(s) for the cable you want, from the listing below.
IF WE ARE ASKED TO MAKE CABLE SELECTION for you, or "suggest" a cable, we are NOT responsible for an incorrect choice and,
All RASCAL to RADIO cable sales are final ! Include a description (Make/model), of your radio.
As most cables are special made the same day the order is received!,
Have your credit card, (VISA, Discover, or MasterCard) information ready. (Helps us ship your order same day)
Please be sure to use correct "Ship-To" Address, ZIPcode, Callsign, and *Phone number* (* UPS required).

*RASCAL to Transceiver cable, regular $19.97, includes one (1) FREE with each RASCAL purchase. Choose FREE cable (CBL) order number from cable list below.↓ Then as you check out, enter the "CBL model" number in the space provided on the "check-out form." NOTICE: For FREE Cable, Enter the RASCAL GLKit (above) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered. In stock, ready to ship. Additional CBLs may be ordered via the SHOPPING CART @ $19.97 each.

*RASCAL GLkit above (shown assembled) includes: Case, All Cables, Connectors, and Documentation. ↓ RASCAL to Transceiver cable is "INCLUDED" Be sure to choose cable (CBL) order number from cable list below.↓ Then enter it in the "CBL Model:" space on the order form as you Check Out. One CBL with each RASCAL kit you order. Additional CBLs are $19.97 each

RASCAL GLkit is $29.95 "PRICE INCLUDES 1 FREE CBL Choose from CBL list below" One regular $19.97 Radio to RASCAL Cable,included FREE with each RASCAL GLX kit! Choose CBL from list below.    Enter model number of FREE CBL in "CBL Model" space provided on shopping cart "CHECK OUT" form.

You got a NEW Laptop PC, but it has no serial comport on it! Not a problem; we have the RASCAL GLX/USB combo for you.   Shown below is the RASCAL GLKU.  Now you can have the best of both worlds, USB or Serial port connections. Now you can have best of both worlds, USB or Serial port operation !  $ 47.95 Order RASCAL GLKU is $47.95 Includes USB to Serial adapter, and "1 FREE RASCAL to RADIO interface CBL. Choose from CBL list below"
NOTE: A CD ROM containing the drivers for the USB2SC is inside the back panel of the USB converter package. All drivers are also available from the SUPPORT OEM CLICK HERE:
Got more than one transceiver? Now you can operate the sound card modes without buying additional interfaces. Simply change from your HF transceiver to the VHF/UHF transceiver by unplugging the HF cable and inserting a different transceiver cable. By using transformer isolation for the transmit and Receive audio paths, we prevent ground loop coupling, and reduce the chance of RF feedback into the PC sound card (squeals, hum, etc). To further reduce RF feedback and RF ingress into the Tx or Rx sound card audio, we install a large (molded) ferrite core over the RASCAL to sound card audio I/O cable(s). The end result is clean, clear, audio, reproduction on-the-air. An added benefit of these preventive measures is the reduction of IMD. RASCAL GLKits are in-stock, ready to ship!

Easy to follow, step-by-step assembly instructions for the most user-friendly kit you've ever built.

No external power supply required.

No case screws to remove and replace when you want to change radios.

No jumpers to juggle.

Fully isolated, BuxComms high quality, isolated coupling transformers prevent "hum-loops."

RFI, Noise and Distortion proof, using high quality, shielded audio cables with ferrite noise attenuators.

High quality, silk screened, fiber glass, printed circuit board

Compact size ABS case is color coordinated to match PC and related HAM gear.

Easiest Setup of any sound card interface available, virtually Plug-N-Play.

Supplied with PC comport (6 ft) cables, and RASCAL GLKit, to radio cable is 6 ft. Overall length exceeds 11 feet.

PC Cables, One set of RASCAL GLKit, to Radio cables, Connectors, Components, and Complete documentation are included.

Each RASCAL GLKit, is fully tested before shipping.

Added circuitry for hard-key'd CW for use with CBL CW cable and multimode software

Added circuitry for use when using transceivers with true FSK (RTTY) output.

Includes a Disk of PSK31 Software, Pictorial diagrams, Tech Support files.

Hardcopy Schematic Diagrams, Documents, and Easy to follow Setup instructions.

Clear lense covered "red" LED transmit indicator.

RASCAL GLKit,™ is the ideal sound card interface for portable and field-day operations.

Automatic PTT control is activated via the PC serial comport via software.

To further reduce CPU noise, the serial comport 6 ft cable is high quality, with foil and drain wire shielding.

An EZ access, transmit level control for transceiver transmit audio control.

RASCAL GLkit is NOW $29.95 → One regular $19.97 Radio to RASCAL Cable,included FREE with each RASCAL GLX kit! Choose CBL from list below.    Enter CBL stock number of FREE CBL in "CBL Model" space provided on shopping cart "CHECK OUT" form.

Each tube contains 110 Inches of 60/40, Rosin Core, Electronics Solder.    Always looking for that elusive piece of solder.... keep several of these tubes nearby. They're easy to spot with the bright yellow top. 110 Inches, .04 Diameter, 60/40 ROSIN CORE SOLDER 99 cents each 'SOLDER'
99 cents each 'SOLDER'

Interface cables "CBL" listed by radio make & model. CLICK for specific radio section.

ALINCO-ADI AZDEN COLLINS

DRAKE ICOM KENWOOD

KDK MIDLAND Radio Shack

RCI SBE SGC

TenTec UNIDEN YAESU

CABLES and ACCESSORIES

Cables, Connectors, and switch-box sets shown on this page may be employed by the user at his or her risk. No liability is assumed by BUX COMM or its employees due to the use and/or misuse of these devices, products, cables, and/or switches. WE DO NOT MAKE SELECTIONS FOR YOU.

ALINCO
We Accept Mail or FAX form CLICK HERE!

CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver

←One CBL FREE with each RASCAL GLX. →

Additional RASCAL to Radio CBLs are $19.97 Each.

CBL Number
Description    (Transceiver model)

Radio Jack/Port
YES, we have dealer quantity discounts !

Order AK8M DX-77T, DX-70TH, DR-110T, DR-130T, DR-410T, DR-510T, DR.112T, DR-570T, DR-590, DR-592, DR-599, DR-600, DR-430T, DR135T/EMKII, DR-235T/TG, DR-435T/TG, DR-620T, DR-M06TH, DR-M03SX, ALR-22T, ALR-22HT, ALR-72T, ALD-24T,

Order DJ25S DJ-120, DJ-160/460, DJ-100, DJ-120 DJ-200 DJ-500, DJ-C1T, C4T, C5T,

Order 20 Alinco Hand-Helds with 2.5mm & 3.5mm I/O
DJ180/480, DJ-196(DJ-195/296/496, DJ-F1/F4, DJ-S1/S4, DJ-160, DJ-460, DJ-162, DJ-560, ALM-203T, ALR-206, DJ-180T,   DJ-280T,   DJ-480T, DJ-580T, DJ-191T,

Order AL45 DR-140, DR-605,

Order AL6A Alinco 8 pin screw-on mic with receive at pin 6 of Mic I/O.
For ALINCO models: DX-77, DR-119, DR-1200

CBL AL135 Alinco DR-135 DataRadio

CBLMDIN BUX NOTICE: Throughout our web pages, you'll see references to the 6 pin Mini DIN. This is the latest attempt by the ISO 9002 committee, to establish a "standard" for 1200 and 9600 baud I/O with PTT. If your radio has this jack as an I/O, this is the port to use for the digital modes, as it enables leaving your microphone connected. If your transceiver supports this 6 pin Mini DIN I/O, then consider using our cable model, "CBL MDIN" with the RASCAL GLX. By using this jack you've enabled simultaneous use of the digital modes and voice operation. (some transceivers require "menu selection" to activate this I/O).

BACK TO TOP

NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered.   Additional CBLs may be ordered via the SHOPPING CART @ $19.97 each.

AZDEN
  We Accept Mail or FAX form CLICK HERE!

CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver

←One CBL FREE with each RASCAL GLX. →

RASCAL to Radio CBLs are $19.97 Each.

Order
CBLMDIN
AZDEN 6 pin Mini DIN for PCS 9000 Data Port

Order AZMX AZDEN transceivers with 8 pin screw-on mic and 3.5mm Ext Spkr plug

BACK TO TOP

COLLINS
We Accept Mail or FAX form CLICK HERE!

To view diagram, click the shopping cart for that model.
CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver

←One CBL FREE with each RASCAL GLX. →

Additional RASCAL to Radio CBLs are $19.97 Each.

Order 75767

     Transceivers with Patch IN, Patch OUT, and PTT RCA jacks

Order CW
RASCAL to transceiver cable for hard-keyed CW operating Order CW is supplied with 3.5 and 1/4" plugs to CW jacks

BACK TO TOP

DRAKE
We Accept Mail or FAX form CLICK HERE!

CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver

←One CBL FREE with each RASCAL GLX. →

Additional RASCAL to Radio CBLs are $19.97 Each.

Order TR7
DRAKE 4 pin screw-on mic with 3.5mm (1/8") Ext Spkr jack
Models TR-7 or TR-7/A, and some TR-22, TR-33, TR-7, UV-3 radios

Order TT25 DRAKE TR-4, TR-4C, TR-4CW, and TR-6 radios. Only the standard 1/4 inch Stereo plugs are supplied! SwitchCraft 230 (Collins) type 3-circuit MIC plug are NOT included. Similar interface to Drake "TWINS." (R4B & TX4B)

Order CW
RASCAL to transceiver cable for hard-keyed CW operating
Order CW is supplied with 3.5 and 1/4" plugs to CW jacks

BACK TO TOP

ICOM
We Accept Mail or FAX form CLICK HERE!

CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver

←One CBL FREE with each RASCAL GLX. →

Additional RASCAL to Radio CBLs are $19.97 Each.
Each $29.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).

Order IC8M
ICOM HF, VHF,/UHF Transceivers w/8 pin Screw-On MIC & Ext Spkr jack.     ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746, 756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics. Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751,

Order IC8PD
ICOM HF-, Transceivers with 8 pin DIN accessory jack
ICOM Models: IC-275, IC-475, IC-721, IC-723, IC-725, IC-726, IC-728, IC-729, IC-732, IC-735, IC-736, IC-737, IC-737A, IC-738, IC-746, IC-746,<HF>IC746PRO, IC-756, IC-756PRO, IC-756PROII, IC-760/Pro, IC-761, IC-765, IC-775, IC-775DSP, IC-780, IC-781, IC-820, IC-821H, IC-910H, IC-970E, IC-970H, IC-1275, IC-2000 and other Icom transceivers with 8 pin DIN accessory I/O ports. AND MORE !

Order 746V
This RASCAL GLX to Transceiver uses both the 8 pin DIN and 7 pin DIN, of the 746 & 756 PRO series.

This is a SPECIAL built cable for use with the Icom 746 & 756 series for use at VHF (NOT HF). Note price of this CBL is 19.95

Order IC13RY
ICOM Transceivers with 13 pin DIN accessory jack w/ FSK pin. Wired for 160-6 meter (HF) use.   BEST CHOICE for Icom: IC-703, IC-706 mk II & IC-718;

Order IC13VU
ICOM  Transceivers with 13 pin DIN accessory jack wired for VHF/UHF operation   For Icom: IC-703, IC-706 mk II & IC-718; and ICOM transceivers with similar I/O jack.

Order MDIN
Six pin mini DIN (VHF) jack for the706 and, transceivers with this I/O Most used for VHF operation with the 706 MK II, IC-207H and ICOMs with similar I/O

Order IC45
ICOM HF, VHF, and UHF transceivers with RJ-45 Modular Mic jacks ICOM models: IC-207H, 2720, 2800, 703, IC-706, IC-718, IC-V8000, IC-281, IC-381, IC-481, IC-681, IC-2000, IC-2100, 2350, 2340, and similar Icom I/O. (Note: for 706 & 718, most ops prefer CBL IC13RY)

Order IC4M
ICOM HF-VHF Transceivers with 4 pin screw-on mic & Ext Spkr
ICOM models IC-202, IC-215, IC-22S, IC-245, IC-280, IC-402, IC-502, etc...

Order 20
ICOM, handheld transceiver(s) with 2.5mm & 3.5mm jacks
Icom W32A, W32E, IC-T7A, T7E, IC-T8A, T8E, and Icom Hand Helds with similar I/O. NOTE: Be sure your Hand-Held uses the same connector format: 2.5mm (TxAFSK/PTT) and 3.5mm (Rx AF).

Order CW
RASCAL to transceiver cable for hard-keyed CW operating Order CW is supplied with 3.5 and 1/4" plugs to CW jacks

706 MK II G to RASCAL GLX enables HF, VHF, UHF, PSK, SSTV, Packet, RTTY/FSK..etc     $27.97
Built-in SPDTswitch enables switching between HF & VHF/UHF Special, Dual Purpose Cable is NOT included as a free CBL IC13HVURY

NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered.   Additional CBLs may be ordered via the SHOPPING CART @ $19.97 each.

Order QRP+ INDEX LABS "QRP+"

Cables, Connectors, and switch-box sets shown on this page may be employed by the user at his or her risk. No liability is assumed by BUX COMM or its employees due to the use and/or misuse of these devices, products, cables, and/or switches. WE DO NOT MAKE SELECTIONS FOR YOU.

JST-245 (Japnese Radio Corp) Mail or FAX form CLICK HERE! E!

CBL Model No. ↓

DESCRIPTION, Make and Model of Transceiver

←One CBL FREE with each RASCAL GLX. →

Additional RASCAL to Radio CBLs are $19.97 Each.

Order JST245
Japnese Radio Corp, model "JST-245"

BACK TO TOP

KENWOOD
We Accept Mail or FAX form CLICK HERE! E!

CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver

←One CBL FREE with each RASCAL GLX. →

Additional RASCAL to Radio CBLs are $19.97 Each.

Order KW8M
KENWOOD Transceivers with 8 pin Screw-On mic & Ext Spkr I/O
KENWOOD models: TM-201, TM-221, TM-231, TM-241, TM-2530, TM-401, TM-421, TM-431, TM-441, TM-531, TM-541, TM-621, TM-631, TM-701, TM-721, TM-731, TR-3200, TR-50, TS-50/S, TS-60, TS-751, TS-851, TS-140, TS-430, TS-440, TS-450, TS-660, TS-670, TS-680, TS-690, TS-701, TS-711, TS-780, TS-790, TS-811, TS-850, TS-870, TS-930, TS-940, TS-950, TW-4000, 4100, and Kenwood transceivers with 8 pin screw-on Mic connectors

Order KW13RY
Kenwood  Transceivers with 13 pin DIN accy jack. w/ FSK "pin."   YES, It includes TS-2000 TS-140, TS-450, TS-570, TS-670, TS-680, TS-690, TS-711, TS-790, TS-811, TS-850, TS-870, TS-950, and Kenwood transceivers with 13 pin DIN accessory jacks.

Early Kenwood (940 & 440 below) transceivers with 13 pin DIN Accessory Jacks see CBL KW40-13
For TS-850 FSK operation, see CBL KW13RY"R" below.

Order KW13RYR
Kenwood TS-850 and KW Transceivers with 13 pin DIN accy and "FSK RCA Jack" For TS-850 Kenwood transceivers with 13 pin DIN and RTTY/FSK "RCA Jack".

Order KW4013
Early KENWOOD HF Transceivers with 13 pin DIN accessory jack TS-940, 440..

Order MDIN
KENWOOD Transceivers with 6 pin mini DIN (ISO standard) jack
(KENWOOD Models: TM-255, TM-455, TM-733, TM-833, TM-G707, TM-V7A, TM-G 707A, (Delta) D-700 and transceivers with 6 pin mini DIN data I/O)

Order THF6 KENWOOD HandHeld Transceivers with 3.5mm & 2.5mm "stereo" I/O
(KENWOOD Models: TH-F6A, TH-F7E and transceivers with similar I/O)

Order 026 KENWOOD TR-2600 HandHeld Transceivers with 3.5mm & 2.5mm
(KENWOOD Models: TR-2600 and transceivers with similar I/O)

Order KW45 KENWOOD HF and VHF Transceivers with (RJ45) MODULAR mic
TM-251, TM-2400, TM-255, TM-261, TM-451, TM-455, TM-461, TM-643, TM-732, TM-733, TM-741, TM-742, TM-833, TM-841, TM-842, TM-941, TM-942, and Kenwoods with RJ45 mic jacks

Order KW4M KENWOOD HF Transceivers w/4 pin screw-on mic & Ext Spkr jack
TS-120, TS-130, TS-180, TS-311, TS-510, TS-511, TS-520, TS-530, TS-600, TS-700, TS-770, TS-801, TS-820, TS-830, TS-900, TX-310, TR-1300, TR-2200, TR-5200, TR-2300, TR-7010, TR-7200, TR-7400, TR-7500, TR-8000, TR-8200, TR-8300, and more)

Order KW5MX Kenwood TR 7600, TR 7625 and Kenwoods with with 5 pin Screw-On Mic and 3.5mm Ext Spkr jack.

Order KW6M KENWOOD HF Transceivers with 6 pin screw-on mic & Ext Spkr jack
TR-7730, TR-7750, TR-7800, TR-7850, TR-7930, TR-7950, TR-8400, TR-9000, TR-9130, TR-9500, and other Kenwood transceivers with 6 pin screw-on mic connectors

Order CW
RASCAL to transceiver cable for hard-keyed CW operating Order CW is supplied with 3.5 and 1/4" plugs to CW jacks

NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered.   Additional CBLs may be ordered via the SHOPPING CART @ $19.97 each.

BACK TO TOP

KDK
We Accept Mail or FAX form CLICK HERE!

Order KDK4MX KDK Transceivers w/4 pin screw-on mic & Ext Spkr jack

BACK TO TOP

MIDLAND
We Accept Mail or FAX form CLICK HERE!

Order MID4MX Midland Transceivers w/4 pin screw-on mic & Ext Spkr jack

BACK TO TOP            If you don't see a cable (CBL) model for your transceiver, let us know, and we'll try to make it.

Radio Shack
We Accept Mail or FAX form CLICK HERE!

CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver

←One CBL FREE with each RASCAL GLX. →

Additional RASCAL to Radio CBLs are $19.97 Each.
Each $29.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).

Order HTX10 Radio Shack HTX-10

Order HTX100 Radio Shack Model HTX-100

Order HTX242 Radio Shack Model HTX-212, and HTX-242 or RS 45

Order HTX252 Radio Shack HTX-252

Order 20 Radio Shack HTX-202 & HTX-404

NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered.   Additional CBLs may be ordered via the SHOPPING CART @ $19.97 each.

BACK TO TOP

RCI
We Accept Mail or FAX form CLICK HERE!

CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver

←One CBL FREE with each RASCAL GLX. →

Additional RASCAL to Radio CBLs are $19.97 Each.
Each $29.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).

Order RCI6 RCI 5054 and RCI radios with 6 pin screw-on MIC
This interface uses the 3.5mm external speaker jack for receive AF, and requires SwitchBox for SSTV.

BACK TO TOP

SBE
34 We Accept Mail or FAX form CLICK HERE!

CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver

Additional RASCAL to Radio CBLs are $19.97 Each.

Order SBE34 SIDEBAND ENGINEERS model SBE 34
This interface provides open-end connection for the SBE34 external speaker screws.. Tx AF input and PTT is to the 1/4" MIC jack.

NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered.   Additional CBLs may be ordered via the SHOPPING CART @ $19.97 each.

BACK TO TOP

SGC
We Accept Mail or FAX form CLICK HERE!

CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver

AdditionalRASCAL to Radio CBLs are $19.97 Each.

Order 2020 SGC model SG-2020
This interface uses the 3.5mm external speaker jack to extract receive audio.

BACK TO TOP

Ten Tec
We Accep Mail or FAX form CLICK HERE!

CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver

Additional RASCAL to Radio CBLs are $19.97 Each.

Order 5PD Ten-Tec with 5 pin DIN data I/O accessory jack
Ten-Tec PEGASUS, Jupiter, (538), and radios with similar 5 pin DIN data I/O. 5 pin (standard) DIN to 5 pin DIN.

Order ORION Ten-Tec ORION (565)
Ten-Tec Orion transceivers with AUX I/O, 8 pin DIN jack.

Order OMNI For Ten-Tec transceivers with; PTT, Tx IN, Rx IN RCA jacks: Ten-Tec OMNI V, & OMNI VI (Late Model Paragon, and Corsair) and transceivers with RCA jacks for ''Patch IN, Patch OUT, and PTT'' jacks.

Order TT25 Ten-Tec transceivers with 1/4 inch Mic and Ext Spkr jacks:
Early Ten-Tec Triton 544, Argonaut 505, 509, 515, (*early Omni V see late model; R-TTOMNI) below), and other Ten-Tec HF Transceivers with 1/4 inch Stereo Mic I/O and 1/4 inch mono external speaker jack. NOTE: This interface cable works with other vintage transceivers; eg; Atlas, Swan,Drake, etc...

Order TT4M Ten-Tec transceivers w/4 pin screw-on mic & 1/4" Ext Spkr I/O

with 1/4" Ext Spkr plug

Order CW
RASCAL to transceiver cable for hard-keyed CW operating Order CW is supplied with 3.5 and 1/4" plugs to CW jacks

BACK TO TOP

UNIDEN
We Accept Mail or FAX form CLICK HERE!

CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver

←One CBL FREE with each RASCAL GLX. →

Additional RASCAL to Radio CBLs are $19.97 Each.
Each $29.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).

Order UNIDEN5MX UNIDEN and some HR2510 with 5 pin Screw-On Mic and Ext Spkr jack.

NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered.   Additional CBLs may be ordered via the SHOPPING CART @ $19.97 each.

BACK TO TOP

YAESU
We Accept Mail or FAX form CLICK HERE!

CBL Model No. ↓
DESCRIPTION, Make and Model of Transceiver

←One CBL FREE with each RASCAL GLX. →

Additional RASCAL to Radio CBLs are $19.97 Each.
Each $29.95 RASCAL includes one FREE RASCAL to Radio cable (CBL).

Order Y8M YAESU transceivers with 8 pin (screw-on) mic input.
Receive audio be taken from the external speaker jack.   YAESU models: FT-1, FT-77, FT-102, FT-107, FT-211, FT-290 MKII, FT-480, FT-690 MKII, FT-707S, FT-712, FT-726, FT-736, FT-747, FT-757, FT-767, FT-770, FT-840, FT-850, FT-790 MK II, FT-912, FT-980, FT-990, FT-1000, FT-2200, FT-2700, FT-5100, FT-7200, FT-840, FT-890, FT-4700, FT-212, FT-ONE-S, FT-650, 707, 712, 726, 736, 756, 767, 77, 790II, 700, 840, 890, 990, 1000D and MORE,

Order Y4M YAESU transceivers with 4 pin (screw-on) mic input
Receive audio is from the external speaker jack.   YAESU models: having 4 pin screw-on microphones.

Order CBLMDIN YAESU transceivers having a, 6 pin Mini DIN for data I/O
YAESU FT-817, FT-100, FT-897, FT-1500, FT-3000, FT-8000, FT-8100, FT-8500, and FT-857   etc.. and   *FT-847 "VHF" port.

Order 847HF YAESU FT-847 3.5mm HF Data I/O HF jack
For Yaesu FT-847 "HF" Data Jack (*NOTE: see CBL MDIN for 847 VHF operation

Order FT600 YAESU FT-736, FT-600, FT-890, & Late Model FT-900. 3.5mm HF Data I/O HF jack
PTT is via RCA "PTT" Jack.

Order YX YAESU hand-held transceivers with 4 circuit, 3.5mm I/O jack.
YAESU FT-10, FT-40, FT-50, VX-1, VX-5, VX-150, and Yaesu handhelds with similar I/O. (NOT VX-7R   !)

Order FT2500 YAESU FT-2500M 2400 & Yaesu transceivers with similar I/O
YAESU FT-2500, 2500M, 2400, etc

Order FT2600 YAESU FT-2600 & Yaesu transceivers with   DB9f   I/O
YAESU FT-2600, 2600M, etc

Order FT2800 YAESU FT-2800 & Yaesu transceivers with   RJ 12 Mic & 3.5mm Ext Spkr
YAESU FT-2800, 2800M, etc

Order 75767 YAESU transceivers using the rear panel RCA jacks;
YAESU FT-102, FT-757, FT-767, FT-920, etc

Order 5PD YAESU FT-1000"Mark V" Transceiver PSK31 Interface
Use also with YAESU FT-920 (insure that data mode switch is in AFSK position)   SPECIAL NOTE: Use the FT1000 MkV, "EASY SET" to configure 5 pin DIN, Packet jack, for USB. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)

CBL FT900 Early model YAESU FT-900 and Yaesu transceivers with similar I/0 For LATE model FT-900, see CBL F600 above. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)

Order FT990 YAESU FT-990 and Yaesu transceivers with similar I/0
For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)

Order 1000D YAESU FT-1000"D" Transceiver PSK31 Interface cable
"NOTE" Receive AF is at "RING" of 3.5mm plug.
For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)*

Order 1000MP YAESU FT-1000"MP" Transceiver PSK31 Interface cable
"NOTE" Receive AF is at "TIP" of 3.5mm plug.
For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)*

Order FT4RY YAESU transceivers with 4 pin DIN RTTY jacks
NOTE: This cable enables FSK/RTTY operation only.

Order 20 YAESU FT-51R & Yaesu handhelds with similar I/O
Yaesu handheld transceiver(s) using similar 2.5mm (TxAFSK/PTT) and 3.5mm (Rx AF) "mono" I/O

Order CW
RASCAL to transceiver cable for hard-keyed CW operating Order CW is supplied with 3.5 and 1/4" plugs to CW jacks

NOTICE: For FREE Cable, Enter the RASCAL GLX (engine) in the Shopping Cart, When you have completed all other order items via the SHOPPING CART, enter the "CHECK OUT" form and use the ''CBL Model'' or "COMMENTS:" space on the Check-Out form to enter the (free) CBL model number(s). One Cable (CBL) FREE with each RASCAL ordered.   Additional CBLs may be ordered via the SHOPPING CART @ $19.97 each.

PLEASE READ THIS !
If you have tried to add an item to your cart and the cart is still empty,
you may not have "cookies" enabled in your browser.

UP CLOSE AND PERSONAL:   Read this now !

When operating PSK31, SSTV, RTTY, etc using your PC sound card; READ close and understand these digital operating rules.

You should always set the RASCAL and SoundCard gain (transmit) controls of your transceiver at 50% or less than half its rated power output.

Most HF transceivers are NOT rated for 100% duty cycle in key-down modes. PSK31, SSTV, & RTTY are KEY DOWN modes.   I've learned this lesson long ago... the hard way.   These settings may change a small amount as you move from one band to another.

When operating PSK31, SSTV, or RTTY/FSK on the HF bands:

Don't use the audio speech processor, turn it OFF.

Don't drive your transceiver into ALC action.

Don't run your transceiver at full RF output power, adjust output power to 50% or less of its rated power output.

The HF PSK31 frequencies are as follows:
160 meters - 1.807
80 meters - 3.580
40 meters - 7.070
30 meters - 10.140
20 meters - 14.070 Beginners, Start Here.
15 meters - 21.070
10 meters - 28.120

Operation of PSK31 is typically in USB mode, thus the actual operating frequencies will range from the lower frequency, upward by three (3) kHz. In theory, this means that you can plunk a hundred, 31 Hz, PSK31 signals into the same spectrum as one SSB signal might occupy.

RASCAL/MIC Switch for transceivers without an accessory jack. EZ switch'n between MIC and RASCAL, Just Flip the switch. It's great when operating SSTV, and modes requiring both voice and digital interaction. The 5 pin DIN at "A" plugs into the RASCAL I/O jack, the Screw-On connector at "B" connects to the radio mic jack. The 3.5mm (1/8") plug at "D" plugs into the (Ext Spkr) "Y" connector (included), and the Radio Microphone connects to the MIC jack at "C". Overall length is nine (9') feet.
Alinco 8 pin Screw On MIC      27.97 ARS8
Icom    8 pin Screw On MIC       27.97 IRS8
Icom    8 pin RJ45 MIC              27.97 IRS45
Kenwood 8 pin Screw On MIC 27.97 KRS8
Kenwood 4 pin Screw On MIC 27.97 KRS4
Yaesu 8 pin Screw On MIC       27.97 YRS8

⁭

Alinco 8 pin Screw On MIC        27.97 ARS8

Icom    8 pin Screw On MIC       27.97 IRS8

Icom    8 pin RJ45 MIC              27.97 IRS45

Kenwood 8 pin Screw On MIC 27.97   KRS8

Kenwood 4 pin Screw On MIC 27.97 KRS4

Yaesu 8 pin Screw On MIC         27.97 YRS8

We also "custom" build other RASCAL to TRANSCEIVER switches for specific model radios. To check for possible availibility eMail us with your inquiry, include radio Make, Model, and Mic connector type.

So you bought one of those (brand X) interfaces that don't isolate the sound card receive audio (input/ Line IN).
This ISOL8R will provide the isolation and help prevent HUM, they forgot to include.

If you only order one, order it for the Sound Card LINE OUT, to protect your Transmit audio from HUM.
ORDER 1, to isolate your transmit audio,   9.97 ISOL8R
SAVE and buy 2, Order ISOL8R , Use one for Sound Card IN, and one for SoundCard OUT.
ORDER 2, and save,                      17.97    ISOL8RX2

Toll FREE order line, → (7 days), → 1 866 300 1969
Order Line, Monday thru Friday, 10 AM to 4 PM, 1 434 534 8873

If you would like instructions explaining how to setup the RASCAL and EchoLink to an Icom 706 and similar HF/VHF radios, send us an Email with your return Email address. We'll send the (pdf) file, return eMail CLICK HERE!

We Accept Mail order or FAX form CLICK HERE!
CLICK HERE to download RASCAL GLX to REPEATER interface Instructions via EchoLink

USB to SERIAL Adapter

OK, so you have a new PC with only a USB port, and no serial port.... Not so, any more. BUX Comm has the answer. This USB to Serial comport converter meets the specs shown below, and enables you to operate the RASCAL© interface(s) from a PC USB port. Also enables the use of TNC I/O and other serial comport devices.

USB V1.1 Compliant

Supports Windows® 98/2000/ME and XP

NOTE: A CD ROM containing the drivers for the USB2SC is inside the back panel of the USB converter package. All drivers are also available from the SUPPORT OEM CLICK HERE:

Installation driver CD (included) installs serial port instantly

Supports baud rates from 1,200 to 115,200 K

Great addition for the new LapTop that came without a serial comport.

Drives the BUX Comm RASCAL"© for Auto-PTT in PSK31. etc.

USB2SC
We Accept Mail order or FAX form CLICK HERE!

Cables and Accessories
IMPORTANT NOTE; Prices of cable assemblies shown, do NOT include shipping & handling.
All orders are shipped within 24 hours of receiving, via USPS PRIORITY MAIL, FED-X Ground, or UPS.
Shipping & Handing added to each interface cable order: USA=$7.90, CANADA =$9.90, Foreign=$15.90

Below are cable assemblies you can use to make your RASCAL GLX or TNC to Radio interface cables.

8 pin DIN male plug wired with 6 ft cable. All 8 pins are connected, wires are color coded, and include one drain/shield wire.

For use with ICOM, and radios with 8 pin DIN accessory jacks.

May also be used to interface KAM and KAM PLUS HF ports to various transceivers.
ORDER 8D $4.99

Make your own RASCAL GLX or TNC2 to Radio interface using this ready made cable. The 5DMX cable is 6 feet long, the 5 pin (male) DIN and 3.5mm external speaker plug are already attached and wired to the 5 pin DIN. All you add is the mating connector for the transceiver end. The cable is prepped with 1/2 inch of each wire exposed, and 1/8 inch bare wire stripped and solder tinned for easy radio plug installation. Cable is almond color.

$4.97 each, Order model 5DMX

This is our cable model "KVXT" which is used to make the TinyTrak, Kantronics VHF or 1200 baud cable, and in most cases, it may be used to fabricate the KAMxl cables.

You add only the transceiver MIC or Accessory connector. It is also used to make the
Tiny-Trak interface cable. All you add is the Radio or transceiver connector for the accessory, or Mic I/O.

4.97

KVXT Pre-Fab Cable, diagram shown below.

SIX (6) foot shielded cable with all 8 wires attached to the 8 pin screw-on microphone connector.

Got a new "super-mic", or need to interface another device to the mic jack.... here's the solution.

$5.90 each Order 8M

13 pin DIN male plug wired with 6 ft (straight) cable. All 13 pins are connected, wires are color coded, and include one drain/shield wire.
For use with KENWOOD, ICOM, and radios with 13 pin DIN jacks.

Temporarily Out Of Stock!

Similar to above, except has 4 pin screw-on mic connector and curly cord.

Curly cord extends to more than SIX (6) feet. Shielded cable with 4 plus shield/drain wires attached to the 4 pin screw-on microphone connector.

Got a new "super-mic", or need to interface another device to the mic jack.... here's the solution. $3.95 each, Model 4M

Microphone Extension Cables: EX8 and EX4:
EX8 has 8 pin screw-on Male on one end, and 8 pin Female on the opposite end. EX8 extends to 8 feet.
EX8, 9.97
_____________________________________________________________________
EX4 has 4 pin screw-on Male on one end, and 4 pin Female on the opposite end. EX4 extends to 4 feet.
EX4, 8.97

AEA PK232 RAD1/RAD2 PREWIRED CABLE & CONNECTOR

This cable is six (6') feet long, wired to the 5 pin molex type connector for AEA PK232 Radio ports.
White wire = TX audio
Bare wire = Shield/Ground
Red wire = Push-To-Talk (PTT)
Blue wire = Receive Audio

Order Model A232CBL   $3.99

CLICK HERE for MORE AUDIO CABLES & CONNECTORS

DVM 810
VELLEMAN 810B. Here's a digital multimeter (DMM). Ideal for the Mountain-topper HAM Radio Operator, or technician. It has an LCD 3.5 digit readout
Features found on more expensive meters are standard on this DMM, they include:
* A transistor and diode tester
* DC Amperes
* AC Amperes
* Overload protection
* 7 functions & 19 Ranges
* Includes 21" test leads and battery.
Ranges to: 1000 Volts DC, 750 Volts AC, Amps DC, Resistance to 2,000,000 Ohms

Order DVM810

$ 8.89

Each tube contains 110 Inches of 60/40, Rosin Core, Electronics Solder.    Always looking for that elusive piece of solder.... keep several of these tubes nearby. They're easy to spot with the bright yellow top. 110 Inches, .04 Diameter, 60/40 ROSIN CORE SOLDER
99 cents each 'SOLDER'
99 cents each 'SOLDER'

Make your own RASCAL GLX or TNC2 to Radio interface using this ready made cable. The 5DMX cable is 6 feet long, the 5 pin (male) DIN and 3.5mm external speaker plug are already attached and wired to the 5 pin DIN. All you add is the mating connector for the transceiver end. The cable is prepped with 1/2 inch of each wire exposed, and 1/8 inch bare wire stripped and solder tinned for easy radio plug installation. Cable is almond color.

$4.97 each, Order model 5DMX

KVXT Pre-Fab Cable, diagram shown below.

SIX (6) foot shielded cable with all 8 wires attached to the 8 pin screw-on microphone connector.

Got a new "super-mic", or need to interface another device to the mic jack.... here's the solution.

$5.90 each Order 8M

Similar to above, except has 4 pin screw-on mic connector and curly cord.

Curly cord extends to more than SIX (6) feet. Shielded cable with 4 plus shield/drain wires attached to the 4 pin screw-on microphone connector.

Got a new "super-mic", or need to interface another device to the mic jack.... here's the solution.
$3.95 each,   Order Model 4M

13 pin DIN male plug wired with 6 ft (straight)
cable. All 13 pins are connected, wires are color coded, and include one drain/shield wire.
For use with KENWOOD, ICOM, and radios with 13 pin DIN jacks.

$5.99 ea. ORDER No. 13D

4 circuit, 3.5mm Plug and Coiled Cable
For YAESU VX-1, VX-5, FT-10, FT-40, & FT-50, etc...
Tip = 1
Ring 1 = 2
Ring 2 = 3
Sleeve = 4
Order Model. VX4 $5.90

The solution for TNC to H-T interfacing for mobile and portable APRS operation. Of course, it makes a heavy-duty replacement cable for the Speaker-Mic. Standard Mic/Earphone 2.5mm & 3.5mm molded plug spacing. Easily extends more than six feet.
Small tip = RED,
Small Sleeve=Shield/Black
Large Tip = Yellow,
Large Sleeve = White

Order No. 34558   $5.90

Stereo "Y" connector, also works great with MONO applications, as "ring" is not used when connected into mono jack.

Use with TNC / KPC/KAM when using external speaker jack. Allows both the TNC and External Speaker for receive audio.

Order, YCONN 99 cents each
RASCAL & SOUND CARD uses 2, YCONN

Sound card six ft male to female stereo extender cables
(1/8") or 3.5mm stereo male, to 3.5mm stereo female, shielded extension cable. These are 6 ft, high-quality, stereo cables. Great for sound card stereo extensions to RASCAL Line IN and Line OUT or MIC IN/SPKR OUT jacks.

Order 35MFSTX $1.49 each

Order 2 for sound card applications.

RASCAL TO PC EXTENDER KIT

This cable kit allows you to space your PC and transceiver more than 15 feet apart. This kit contains:
One (1) db9 female, to db9 male cable 6 feet, serial comport cable, and
Two (2) 3.5mm stereo female to male, sound card cables.

Combined with the 6 ft RASCAL to transceiver cables, and 6 ft, RASCAL GLX to PC cables, you can separate the radio and PC more than 15 feet.

$3.99 Order Model RXK    Add To Cart

Make your own CBL, using this ready made cable. The 5DMX cable is 6 feet long, the 5 pin (male) DIN and 3.5mm external speaker plug are already attached and wired to the 5 pin DIN. All you add is the mating connector for the transceiver/radio end of the cable. The cable is already prepped with 1/2 inch of each wire exposed, and 1/8 inch bare wire stripped, and solder tinned for easy attaching to your radio mating plug.

    $4.97 each, Order model 5DMX Add To Cart

10 feet long, Category 5 Cable (Unshielded Twisted Pair) A multipair (usually 4 pair) high performance cable that consists of twisted pair conductors, used mainly for data transmission. Note: The twisting of the pairs gives the cable a certain amount of immunity from the infiltration of unwanted interference.

Basic cat 5 cable was designed for characteristics of up to 100 MHz. Category 5 cable is typically used for Ethernet networks running at 10 or 100 Mbps.

Use for Mic Cable to Radios with RJ45 Mic I/O
CAT5E10FT 2.99

Use with RJ45 Switch Box below.

10 feet long, Category 5 E Shielded Cable (enhanced/Shielded) Same as Category 5, except that it is made to somewhat more stringent standards The Category 5 E standard is now officially part of the 568A standard.

Category 5 E is recommended for all new installations, and was designed for transmission speeds of up to 1 gigabit per second (Gigabit Ethernet).

Use for Mic Cable to Radios with RJ45 Mic I/O
CAT5ES10FT 3.99

Use with RJ45 Switch Box below.

RJ45 SWITCH BOX
Switch between your RJ45 Mic and RASCAL GLX, Two RJ45 INPUTS with output to your transceiver. Ideal For RASCAL GLX to radios with RJ45 (modular 8 pin) jack. SSTV to MIC switching, etc.
• Metal Casing, Fully Shielded
• Rotary Switch for Extended use
• All Female Connectors 8 pos, 8cond
• Gold Plated Contacts Ensure Signal Integrity
• 14.97 Order RJ45SW1-2
$14.97
Order RJ45SW12

You can use this box to switch between four serial comports of your PC(s), or if you have only one serial comport, use the SW5 to switch between the RASCAL and other serial I/O devices. The SW5 is so versitle, it can be used as a monitor switchbox via the 15 pin I/O ports. .~~Reg 44.95~~  BUX COMM price $ 19.99 INCLUDES 1 (FREE) RASCAL TO SW5 CABLE.
SW5,  $19.99 each

Five (5) pin DIN to 4 RCA male plugs. 36" shielded leads molded as one cable.

RASCAL GLX Color Designators:
Pin 1 to RED      = Transmit Audio
Pin 2 to Shld     = Ground/Shield
Pin 3 to Yellow = PTT
Pin 4 to Black   = Receive Audio
Pin 5 to White   = RTTY or CW line*
    *(depends on software)

$14.97 5D4RCA
←See RASCAL notes at left.
$9.97    5D4RCA

Six (6) ft, 5 pin DIN, male to female cable. This cable is used as an extension from the RASCAL GLX to the matching RASCAL to Radio CBL.   The BUX COMM 5D6MF has hundreds of other uses and applications. $6.97 Order 5D6MF   ↓
↓ 6.97   Order 5D6MF

American Flag, BUX COMM PEN Has our name, address, and web page address embossed on it.
Keep our web page address handy. FREE with $100.oo order

                   Our Shipping and Handling charges are based on the following table:

For shipments to destinations within the continental USA and CANADA
For Orders 0 to 2 pounds,        $7.90 added to total.
For Orders 2 to 5 pounds,        $9.90 added to total.
For Orders 5 to 10 pounds,      $11.90 added to total.
For Orders 10 to 20 pounds,    $15.90 added to total.
For Orders 20 to 55 pounds,    $28.90 added to total.

Foreign orders, 0 to 2 pounds, $15.90.   Sorry, due to loss and damage, No antennas shipped outside the continental USA

Toll FREE order line, → (7 days), → 1 866 300 1969
Dealer Order Line, Monday thru Friday, 10 AM to 4 PM, 1 434 534 8873

When placing phone orders, have list of items (model numbers), descriptions, and credit card, (VISA, Discover, or MasterCard) information ready, so we can process your order, and ship it same day. Please be sure to use correct "ship-to" address and current phone number (UPS required).

BUX COMM corp.

Order Line, Mon > Fri 10 AM to 4 PM, 1 4 3 4 5 3 4 88 73 or FAX your order, 24/7 to FAX 1 434 525 7818

For Quantity Quotes or Dealer Pricing;

All text and graphics on these pages are ©®™ of G. E. Rogers Sr and BUX COMM Corp 1986 - 2005

CLICK HERE to download RASCAL GLX to REPEATER interface Instructions via EchoLink

ALINCO-ADI	AZDEN	COLLINS
DRAKE	ICOM	KENWOOD
KDK	MIDLAND	Radio Shack
RCI	SBE	SGC
TenTec	UNIDEN	YAESU
CABLES and ACCESSORIES