BUXPED6

Mounting of two-way radios, scanners, Sirrus satellite receivers, cellular phones, and many more applications.

BUX COMM HAM Radio six (6") inch pedestal mount with adjustable plate & base.  Works great for radio mounting or mount upside down for use with XM Satellite Receivers.  Thousands of other uses and applications.

Order  BUXPED6

Supports Windows� 98/2000/ME and
CLICK HERE to Download XP drivers Installation driver CD (included) installs serial port instantly Supports baud rates from 1,200 to 115,200 K  Great addition for the new LapTop that came without a serial comport.  Drives the BUX Comm RASCAL"� for Auto-PTT in PSK31. etc. ADD A SERIAL (comport) to your PC or laptop without removing it from the case.  $19.95 each  ORDER No.  USB2SC

USB Cable, Male Type A to Male Type B, 6 feet long, 6 foot, USB CABLE  standard A-B USB interface cable for printers, and other USB to PC applications.Shielded with internal "drain wire."
               1.99   USB6F          ↓

4 Conductor "INLINE" PLUG, mate for 4 circuit jack.

4 Conductor "INLINE" JACK, mate for 4 circuit plug.

DUAL (3.5mm) 1/8" PHONE STEREO JACKS TO (3.5mm) 1/8" PHONE STEREO PLUG ADAPTER
Great for splitting Sound Card Input and Output feeding RASCAL and speakers..etc.
Stereo 2X IN & 1 Stereo OUT

GOLD-PLATED RCA PANEL-MOUNT JACK - BLACK   Order : CA056B

Specifications

color: black
chassis mount
hole: � 0.24"
panel thickness: max. 0.19"

GOLD-PLATED RCA PANEL-MOUNT JACK - RED   Order CA056R

Specifications

color: red
chassis mount
hole: � 0.24"
panel thickness: max. 0.19"

1 X 4P NICKEL-PLATED RCA JACKS
Order Code: CA066

Specifications
material: nickel plated
dimensions: 3.0" x 1.0"

BLACK

RED

WHITE

YELLOW

YELLOW

Specifications
color: BLACK
length: 1.7"
drill hole: 0.3"
panel thickness: max. 0.28"

Specifications
color: RED
length: 1.7"
drill hole: 0.3"
panel thickness: max. 0.28"

Use with TNC / KPC/KAM when using external speaker jack.  Allows both the TNC and External Speaker for receive audio

1000 Hz (1 kHz) SIGNAL GENERATOR kit is great for tune up, signal injection, linear setup, and ALC testing of your RF linear amplifier.

Features:
Signal output: sine wave, triangle, square wave and integrator (selectable through jumper) signal frequency: approx 1kHz (fixed).  Output level: adjustable from 0 to 100mVrms (LEVEL potentiometer)

Specifications:  power supply: 9V battery (not incl.)  dimensions: 2.2" x 1.6"

Second shaft shown as example of  both ends
(philips + & flat point - ) of bit.
Features:  
screwdriver 2-in-1
philips & flat point
total length: 4.7"

BOX CUTTER
Order: VTK3B

Features:  with lock,  size: 4.9"

MICRO CUTTING NIPPERS

The most versatile tool in the HAM Shack.

 
Order Code: VT100

HEAVY DUTY 
DIAGONAL CUTTER
Order Code: VT106

Features
carbon steel, hardened
black oxide finish

Specifications
size: 4.9"

Specifications

hex: 0.06", 0.08", 0.10", 0.12",
0.14", 0.16", 0.20", 0.24"

3-CHANNEL AUDIO/VIDEO SWITCHER
Order  AVW089  $ 6.89  
Features:
audio/video switcher: 3 inputs -> 1 output
dimensions: 6.3" x 2.6" x 1.2"

BLACK CABLE TIES - 100pcs
.99 Pk of 100
Colour: BLACK (UV Resistant)
Dimensions (A x B): 98 x 2.5mm
Quantity: 100pcs
Material: polyamide (nylon 6.6) as specified in MIL-S-23190 self-extinguishing
temperature: -40�F to 230�F
Tensile strength = 18 pounds
A = 4 inches

.99 / Pak of 100
Order : KTFB3

COMPACT MULTI-PURPOSE PLIERS -    Order  VTMPPLC

Multi-purpose pliers : pliers, cutter, screwdriver, saw, etc.
Features:  comes with carrying case

Specifications:  length: 3.9" (closed)
weight: 5.7oz.

Five (5) pin DIN to 4 RCA male plugs.  36" shielded leads molded as one cable.

RASCAL GLX Color Designators:
Pin 1 to RED      = Transmit Audio
Pin 2 to Shld     = Ground/Shield
Pin 3 to Yellow  = PTT
Pin 4 to Black   = Receive Audio
Pin 5 to White   = RTTY or CW line*         
                        *(depends on software)

$ 9.97 5D4RCA

9.97    5D4RCA

Six (6) ft, 5 pin DIN, male to female cable.  This cable is used as an extension from the RASCAL GLX to the matching RASCAL to Radio CBL.   The BUX COMM 5D6MF has hundreds of other uses and applications.  $6.97   Order 5D6MF   ↓

"STRAIGHT"  Microphone Extension Cable

EX8 has 8 pin screw-on Male on one end, and 8 pin Female on the opposite end. EX8  extends to 6 feet. EX8  12.95

 

Quarter-inch, mono plug is often used for head phone connections and external speaker plug. Known as the 1/4 inch mono plug.         25MONO   $1.00

Quarter-inch Stereo plug is often used in High Power Audio systems. The 1/4 inch stereo plug is also used as Microphone input and PTT for some Collins, Drake, Heath, Ten-Tec, etc... transceivers.
Order No.  25SMIC    $1.25

3 for .99

EACH

3/.99

3 for .99 

EACH

3/.99

3 for .99 

EACH

3/.99

3.5mm Stereo Plug (1/8inch) 35SP $0.85 

3 for .99

EACH

3/.99

3.5mm Stereo jack.  Although made for PC board mounting, They may also be used to make "in-line" jacks for sound-card applications. $0.75ea   order   35PCBJAK

This is the same type female connector used as the ISO standard I/O on many late model transceivers.  Has PCB pins, or can be soldered to to make extension cables.  99� each,  MDIN6JAK 

 SIX pin "Mini" DIN Plug (MALE)
Used as accessory plug to interface data input and output on many transceivers. e.g. PSK31 I/O
$1.99 each Order # 6PDMDIN

Standard 4 pin DIN Plug  Used as RTTY and CAT accessory plug I/O on some transceivers for RTTY interfacing (I/O).  .99 ea  Order # 4PDM

5 ft cable, wired to 4 pin DIN male connector. Pin 4 is bare/shield/ground.
1=White
2=Blue
3=Red
4=BARE/Shield    Order   4D  @ $4.99

Standard 5 pin DIN Plug  Used as accessory port I/O on some transceivers for PSK31 and SSTV sound card interfacing (I/O). Also a very popular TNC interface connector to PacComm, MFJ, and AEA TNC, radio ports. $ .99 ea # 5PDM

Standard 5 pin DIN female inline  Used as accessory port I/O on some transceivers for PSK31 and SSTV sound card interfacing (I/O).
$ 1.99 ea # 5PDFIL

5 pin DIN cable pre-wired with all 5 pins connected, with shield and drain wire.  This cable is used to interface RASCAL GLX to PC sound card & Radio. Also mates the 5 pin I/O jack on most TNCees. 6 feet, All wires are color coded.With 5 ft shielded cable, wired to 5 pin DIN male connector.   Order   5D    @ $1.99

5 pin DIN Chassi Mount Female
5DCMF, Female 5 pin DIN jack may be panel mounted, or combined with another similar connector to form an in-line adapter cable. 5DPCF is same except is for PC board mount.  .79 ea Order 5DCMF

5 pin DIN Printed Circuit board mount. 5DCMF, Female 5 pin DIN jack may be panel mounted, or combined with another similar connector to form an in-line adapter cable. 5DPCF is same except is for PC board mount. .97 ea Order 5DPCF

6 PIN, 240� DIN JACK - BLACK
Order CA085
Specifications

boot color: black,  5 pins over 240� + 1 centering pin, boot in molded plastic, solder connections

MATES with CA083 below.

6 PIN, 240� DIN PLUG - BLACK
Specifications

boot color: black,  5 pins over 240� + 1 centering pin, boot in molded plastic, solder connections

MATES with CA085 above.

This six ft cable uses the same 240�,  6 pin DIN connector as CA083.  The DIN PLUG is wired with all 6 pins connected.  Ready to attach to your linear, or other connectors at opposite end.

Specifications:

type: panel mount
5 pins over 240� + 1 centre pin
solder connections

Standard 7 pin DIN Plug used as CAT interface plug on some transceivers for Computer Aided Tuning (CAT) (I/O).   $1.25 each  Order 7PDM

shielded cable, wired to 7 pin DIN male connector.   Order   7D  @ $4.99

Standard 8 pin DIN Plug  Used as accessory plug to interface data input and output to many ICOM transceivers. e.g. PSK31 I/O, and KAM HF port. $1.49 ea Order 8PDM

Standard 8 pin DIN InLine jack  Used as Inline jack to mate 8 pin DIN male, shown above.
 $1.99 ea Order 8PDFIL

Standard 8 pin DIN Plug with 6 ft cable, wired for ICOM 8 pin accessory jack, All 8 pins have wires, and color coded.
ORDER   8D  @ $5.95

Standard 13 pin DIN Plug  MALE
Used as accessory plug to interface data input and output to many Kenwood & Icom transceivers. e.g. PSK31 I/O    $1.99 ea. Order  13DMP

Standard 13 pin DIN Inline FEMALE Jack  Mates 13 pin DIN male. Used as accessory jack to interface data input and output to many Kenwood & ICOM etc.. transceivers.    $2.99 ea Order 13PDFIL

13 pin DIN MALE plug and 6 ft cable.  All 13 pins are connected, wires are color coded, and include one drain/shield wire. Use with KENWOOD, ICOM, & radios with  13 pin DIN jacks.
$6.95 ea. 13D

That AEA PK232 plug that is so hard to find.... BUX COMM  has them in stock!  Plug for the AEA PK-232 TNC.    Order 232F5,    2 for 99 cents 

Metal Shielded RJ45 jack or CAT 5 jack, with pins for printed circuit board mounting. We use these to make RJ45 extensions for ICOM and other transceiver microphones. Great for switchbox I/O for MIC/PSK31 interface. 2  for 99�   RJ45PCBJ

RJ45 Plug     4/$1.00    Order RJ45P

Used in PSK31 transceiver to sound-card interface, this shielded, twin cable has two, 3.5mm stereo connectors on one end. When using with PSK31, SSTV, RTTY, and Packet Sound card interfaces, only the "tip" of each connector is used; The "ring" is not used. NOTE that a large ferrite core is molded into each line near the sound card end of the cable. This is another means of preventing noise and RF feedback.  Twin cable is four feet long.  .99 � each SCABLE

Sound card six ft male to female stereo extender cables  (1/8") or 3.5mm stereo male, to 3.5mm stereo female, shielded extension cable.  These are  6 ft, high-quality, stereo cables.  Great for sound card stereo extensions to RASCAL Line IN and Line OUT or MIC IN/SPKR OUT jacks.  35MFSTX2  $2.99 /set of 2.

8 pin DIN male plug wired with 6 ft cable. All 8 pins are connected, wires are color coded, and include one drain/shield wire. For use with ICOM, and radios with 8 pin DIN accessory jacks.  May also be used to interface KAM and KAM PLUS HF ports to various transceivers.   $5.95 ea. ORDER No. 8D

Make your own CBL, using this ready made cable.  The 5DMX cable is 6 feet long, the 5 pin (male) DIN and  3.5mm external speaker plug are already attached and wired to the 5 pin DIN.  All you add is the mating connector for the transceiver/radio end of the cable. The cable is already prepped with 1/2 inch of each wire exposed, and 1/8 inch bare wire stripped, and solder tinned for easy attaching to your radio mating plug.
     $4.90 each,  model  5DMX 

SIX (6) foot shielded cable with all 8 wires attached to the 8 pin screw-on microphone connector.  Got a new "super-mic", or need to interface another device to the mic jack.... here's the solution.  $4.90 each,   Order Model  8M

PLUG & JACK COMBO  PJ25   
High Quality at half the price !  1/4 inch Stereo, Plug & Jack set.  Complete with all mounting hardware.  Jacks are "closed-circuit" type,  however they may be wired configured as; Mono, Stereo, or Open-Circuit. set (Plug & Jack) $3.99  

10 feet long, Category 5 Cable (Unshielded Twisted Pair) A multipair (usually 4 pair) high performance cable that consists of twisted pair conductors, used mainly for data transmission. Note: The twisting of the pairs gives the cable a certain amount of immunity from the infiltration of unwanted interference. 

Basic cat 5 cable was designed for characteristics of up to 100 MHz. Category 5 cable is typically used for Ethernet networks running at 10 or 100 Mbps.

Use for Mic Cable to Radios with RJ45 Mic I/O

Use with RJ45 Switch Box below.

10 feet long, Category 5 E Shielded Cable (enhanced/Shielded) Same as Category 5, except that it is made to somewhat more stringent standards The Category 5 E standard is now officially part of the 568A standard. 

Category 5 E is recommended for all new installations, and was designed for transmission speeds of up to 1 gigabit per second (Gigabit Ethernet).

Use for Mic Cable to Radios with RJ45 Mic I/O

RJ45 SWITCH BOX
Switch between your RJ45 Mic and RASCAL GLX, Two RJ45 INPUTS with output to your transceiver.  Ideal For RASCAL GLX to radios with RJ45 (modular 8 pin) jack.  SSTV to MIC switching, etc.
� Metal Casing, Fully Shielded
� Rotary Switch for Extended use
� All Female Connectors 8 pos, 8cond
� Gold Plated Contacts Ensure Signal Integrity  � Order RJ45SW1-2 

You can use this box to switch between four serial comports of your PC(s), or if you have only one serial comport, use the SW5 to switch between the RASCAL and other serial I/O devices. The SW5 is so versitle, it can be used as a monitor switchbox via the 15 pin I/O ports.  .Reg 44.95  BUX COMM price $ 19.99
INCLUDES 1 (FREE) RASCAL TO SW5 CABLE.
 SW5,  $19.99 each