Serving Telecommunications and HAM
Radio since 1969
Toll-free OrderLine:
Monday thru Friday
9am to 4pm,
Eastern
1 866
300 1969
Toll Free, OrderLine
Saturday,
12
noon to 6
pm Eastern
1 800 726 2919
When calling the Toll Free
numbers, be sure to have your Order numbers ready, All orders
ship same business day
We Accept;
NOTICE:
We ship WINDOM and
G5RV antennas worldwide,
However;
Due to excessive
damage, we cannot ship
HF Mobile or VHF Base antennas outside the continental USA !
RASCAL GLX "KIT" Page
The following is reprinted with permission,
courtesy CQ Magazine, page 73, February 2005
(from "DIGITAL" by Don Rotolo, N2IRZ"
|
Dealer
Orders Line,
Monday thru
Friday, 10 AM to 4 PM, 1 434 534
8873 |
When placing phone orders, choose
the cable model number(s) for the cable you want, from the listing below.
All RASCAL to RADIO cable sales are final !
Include a description (Make/model), of your radio.
As most cables are special made the same day the order is received!,
Have your credit card, (VISA, Discover, or MasterCard)
information ready.
(Helps us ship your order same day)
Please be sure to use correct
*RASCAL to Transceiver cable, regular $19.97, includes one (1) FREE with each RASCAL purchase. Choose FREE cable (CBL) order number from cable list below.↓ Then as you check out, enter the "CBL model" number in the space provided on the "check-out form." NOTICE: Sorry; no tech support for kits built by others, One Cable (CBL) FREE with each RASCAL ordered. In stock, ready to ship. Additional CBLs may be ordered via the SHOPPING CART @ $19.97 each.
*RASCAL GLkit above (shown assembled) includes: Case, All Cables, Connectors, and Documentation. ↓ RASCAL to Transceiver cable is "INCLUDED" Be sure to choose cable (CBL) order number from cable list below.↓ Then enter it in the "CBL Model:" space on the order form as you Check Out. One CBL with each RASCAL kit you order. Additional CBLs are $19.97 eachRASCAL GLkit is $
29.95"PRICE INCLUDES 1 FREE CBL Choose from CBL list below" One regular $19.97 Radio to RASCAL Cable,included FREE with each RASCAL GLX kit! Choose CBL from list below. Sorry; no tech support for kits built by others. Enter model number of FREE CBL in "CBL Model" space provided on shopping cart "CHECK OUT" form.
You got a NEW Laptop PC, but it has no serial comport on it! Not a problem; we have the RASCAL GLX/USB combo for you. Shown here is the RASCAL GLKU. Now you can have the best of both worlds, USB or Serial port interface control. Now you can have best of both worlds, USB or Serial port operation ! $ 49.95 Order RASCAL GLKU is $49.95 Includes both Serial and USB control, and "1 FREE RASCAL to RADIO interface CBL. Choose from CBL list below"
Model GLKU $49.95
NOTE: A CD ROM containing the drivers for the USB2SC is inside the back panel of the USB converter package. All drivers are also available from the SUPPORT OEM CLICK HERE:Got more than one transceiver? Now you can operate the sound card modes without buying additional interfaces. Simply change from your HF transceiver to the VHF/UHF transceiver by unplugging the HF cable and inserting a different transceiver cable. By using transformer isolation for the transmit and Receive audio paths, we prevent ground loop coupling, and reduce the chance of RF feedback into the PC sound card (squeals, hum, etc). To further reduce RF feedback and RF ingress into the Tx or Rx sound card audio, we install a large (molded) ferrite core over the RASCAL to sound card audio I/O cable(s). The end result is clean, clear, audio, reproduction on-the-air. An added benefit of these preventive measures is the reduction of IMD. RASCAL GLKits are in-stock, ready to ship!
Easy to follow, step-by-step assembly instructions for the most user-friendly kit you've ever built.
No external power supply required.
No case screws to remove and replace when you want to change radios.
No jumpers to juggle.
Fully isolated, BuxComms high quality, isolated coupling transformers prevent "hum-loops."
RFI, Noise and Distortion proof, using high quality, shielded audio cables with ferrite noise attenuators.
High quality, silk screened, fiber glass, printed circuit board
Compact size ABS case is color coordinated to match PC and related HAM gear.
Easiest Setup of any sound card interface available, virtually Plug-N-Play.
Supplied with PC comport (6 ft) cables, and RASCAL GLKit, to radio cable is 6 ft. Overall length exceeds 11 feet.
PC Cables, One set of RASCAL GLKit, to Radio cables, Connectors, Components, and Complete documentation are included.
Added circuitry for hard-key'd CW for use with CBL CW cable and multimode software
Added circuitry for use when using transceivers with true FSK (RTTY) output.
Includes a Disk of PSK31 Software, Pictorial diagrams, Tech Support files.
Hardcopy Schematic Diagrams, Documents, and Easy to follow; Step-by-Step and Setup instructions are included.
Clear lense covered "red" LED transmit indicator.
RASCAL GLKit,™ is the ideal sound card interface for portable and field-day operations.
Automatic PTT control is activated via the PC serial comport via software.
To further reduce CPU noise, the serial comport 6 ft cable is high quality, with foil and drain wire shielding.
An EZ access, transmit level control for transceiver transmit audio control.
You got a NEW Laptop PC, but it has no serial comport on it! Not a problem; we have the RASCAL GLX/USB combo for you. Shown here is the RASCAL GLKU. Now you can have the best of both worlds, USB or Serial port interface control. Now you can have best of both worlds, USB or Serial port operation ! $ 49.95 Order RASCAL GLKU is $49.95 Includes both Serial and USB control, and "1 FREE RASCAL to RADIO interface CBL. Choose from CBL list below"
Model GLKU $49.95
RASCAL GLkit is NOW $29.95 →
Each tube contains 110 Inches of 60/40, Rosin Core, Electronics Solder. Always looking for that elusive piece of solder.... keep several of these tubes nearby. They're easy to spot with the bright yellow top. 110 Inches, .04 Diameter, 60/40 ROSIN CORE SOLDER 99 cents each 'SOLDER'
99 cents each 'SOLDER'
For the operator with sound card I/O, but only MIC IN, and SPEAKER OUT. Use this 40 db attenuator between RASCAL out, and sound card MIC IN.
$ 7.97 Order 40DBPAD
FOR PC's with USB ports only ↓ (No serial comport) or if you have the late model LapTop withouta serial comport on it! Not a problem; we have the USB2SC comport adapter for 19.95. Shown here with the RASCAL GLXBU. Now you can have the best of both worlds, USB or Serial port operation ! USB to Serial Adapter $ 23.95
NOTE: The data input/output jack (6 pin Mini DIN) shown here is now in use on most all Alinco, ICOM, Kenwood, Yaesu and other recent make and model transceivers. TM-255, TM-455, TM-G707, TM-D700x, TM-V7, TS-480, TM-733, TM-833, TM-G707, TM-V7A, (Delta) D-700, 480hx, FT-100, FT-817, FT-857, FT-897, FT-7100, FT-7800, FT-8100R, FT-840, FT-847 V-UHF, FT-890, FT-900, FT-1500, FT-3000, FT-8500, IC-2720H, IC-2725E, 706 MK II, IC-207H, AZDEN PCS 9000
RASCAL KIT with FREE Cable $29.95
Order RMDINKALINCO We Accept
Order Number for
RASCAL & FREE CABLEDescription (Transceiver model)
RASCAL GLX & FREE CABLE
RASCAL KIT &
this FREE cable
$ 29.95
RAK8MDX-77T, DX-70TH, DR-110T, DR-130T, DR-410T, DR-510T, DR.112T, DR-570T, DR-590, DR-592, DR-599, DR-600, DR-430T, DR135T/EMKII, DR-235T/TG, DR-435T/TG, DR-620T, DR-M06TH, DR-M03SX, ALR-22T, ALR-22HT, ALR-72T, ALD-24T,
RASCAL KIT & CABLE
CABLE ONLY
RASCAL Kit &
FREE cable
$ 29.95
RDJ25SDJ-120, DJ-160/460, DJ-100, DJ-120 DJ-200 DJ-500, DJ-C1T, C4T, C5T,
RASCAL kit & CABLE
CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
R20Alinco Hand-Helds with 2.5mm & 3.5mm I/O
DJ180/480, DJ-196(DJ-195/296/496, DJ-F1/F4, DJ-S1/S4, DJ-160, DJ-460, DJ-162, DJ-560, ALM-203T, ALR-206, DJ-180T, DJ-280T, DJ-480T, DJ-580T, DJ-191T,
RASCAL kit & CABLE
CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RAL45DR-140, DR-605,
RASCAL kit & CABLE
CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RAL6AAlinco 8 pin screw-on mic with receive at pin 6 of Mic I/O.
For ALINCO models: DX-77, DR-119, DR-1200
RASCAL kit & CABLE
CABLE ONLY
RASCAL Kit &
FREE cable
$ 29.95
RAL135Alinco DR-135 DataRadio
RASCAL kit & CABLE
CABLE ONLY
RASCAL Kit &
FREE cable
$ 29.95
RMDINBUX NOTICE: Throughout our web pages, you'll see references to the 6 pin Mini DIN. This is the latest attempt by the ISO 9002 committee, to establish a "standard" for 1200 and 9600 baud I/O with PTT. If your radio has this jack as an I/O, this is the port to use for the digital modes, as it enables leaving your microphone connected. If your transceiver supports this 6 pin Mini DIN I/O, then consider using our cable model, "RMDIN" with the RASCAL GLX. By using this jack you've enabled simultaneous use of the digital modes and voice operation. (some transceivers require "menu selection" to activate this I/O).
RASCAL kit & CABLE
CABLE ONLY
AZDEN We Accept
Order Number
Description (Transceiver model)
RASCAL GLX & FREE CABLE
RASCAL Kit &
FREE cable
$ 29.95
RMDINAZDEN 6 pin Mini DIN for PCS 9000 Data Port
RASCAL kit & CABLE
CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RAZMXAZDEN transceivers with 8 pin screw-on mic and 3.5mm Ext Spkr plug
RASCAL kit & CABLE
CABLE ONLY COLLINS We Accept
Order Number
Description (Transceiver model)
RASCAL GLX & FREE CABLE
RASCAL Kit &
FREE cable
$ 29.95
R75767Transceivers with Patch IN, Patch OUT, and PTT RCA jacks
RASCAL kit & CABLE
CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RCWRASCAL to transceiver cable for hard-keyed CW operating Order CW is supplied with 3.5 and 1/4" plugs to CW jacks RASCAL kit & CABLE
CABLE ONLY DRAKE
We Accept
Order Number
Description (Transceiver model)
RASCAL GLX & FREE CABLE
RASCAL Kit &
FREE cable
$ 29.95
RTR7DRAKE 4 pin screw-on mic with 3.5mm (1/8") Ext Spkr jack
Models TR-7 or TR-7/A, and some TR-22, TR-33, TR-7, UV-3 radios
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RTT25DRAKE TR-4, TR-4C, TR-4CW, and TR-6 radios. Only the standard 1/4 inch Stereo plugs are supplied! SwitchCraft 230 (Collins) type 3-circuit MIC plug are NOT included. Similar interface to Drake "TWINS." (R4B & TX4B)
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RCWRASCAL to transceiver cable for hard-keyed CW operating
RASCAL kit & CABLE CABLE ONLY ICOM
Order Number
Description (Transceiver model)
RASCAL GLX & FREE CABLE
RASCAL Kit &
FREE cable
$ 29.95
RIC8MXICOM HF, VHF,/UHF Transceivers w/8 pin Screw-On MIC & Ext Spkr jack. ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746, 756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics. Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751,
RASCAL kit & CABLE
CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RIC8PDICOM HF-, Transceivers with 8 pin DIN accessory jack
ICOM Models: IC-275, IC-475, IC-721, IC-723, IC-725, IC-726, IC-728, IC-729, IC-732, IC-735, IC-736, IC-737, IC-737A, IC-738, IC-746, IC-746,<HF>IC746PRO, IC-756, IC-756PRO, IC-756PROII, IC 756proIII, IC-760/Pro, IC-761, IC-765, IC-775, IC-775DSP, IC-780, IC-781, IC-820, IC-821H, IC-910H, IC-970E, IC-970H, IC-1275, IC-2000 and other Icom transceivers with 8 pin DIN accessory I/O ports. AND MORE !RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RIC13RYICOM Transceivers with 13 pin DIN accessory jack w/ FSK pin. Wired for 160-6 meter (HF) use. BEST CHOICE for Icom: IC-703, IC-706 mk II G IC-718, & IC 7000;
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RIC13VUICOM Transceivers with 13 pin DIN accessory jack wired for VHF/UHF operation For Icom: IC-703, IC-706 mk II & IC-718, IC 7000 and ICOM transceivers with ACC jack.
RASCAL kit & CABLE CABLE ONLY
RASCAL Kit &
FREE cable
$ 29.95
RMDINSix pin mini DIN (VHF) jack for the706 and, transceivers with this I/O Most used for VHF operation with the 706 MK II, IC-207H and ICOMs with similar I/O
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RIC45ICOM HF, VHF, and UHF transceivers with RJ-45 Modular Mic jacks ICOM models: IC-207H, 2720, 2800, 703, IC-706, IC-718, IC-V8000, IC-281, IC-381, IC-481, IC-681, IC-2000, IC-2100, 2350, 2340, and similar Icom I/O. (Note: for 706 & 718, most ops prefer CBL IC13RY)
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RIC4MICOM HF-VHF Transceivers with 4 pin screw-on mic & Ext Spkr
ICOM models IC-202, IC-215, IC-22S, IC-245, IC-280, IC-402, IC-502, etc...RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
R20ICOM, handheld transceiver(s) with 2.5mm & 3.5mm jacks
Icom W32A, W32E, IC-T7A, T7E, IC-T8A, T8E, and Icom Hand Helds with similar I/O. NOTE: Be sure your Hand-Held uses the same connector format: 2.5mm (TxAFSK/PTT) and 3.5mm (Rx AF).RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RCWRASCAL to transceiver cable for hard-keyed CW operating RASCAL kit & CABLE CABLE ONLY 706 MK II G to RASCAL GLX enables HF, VHF, UHF, PSK, SSTV, Packet, RTTY/FSK..etc $29.97
Built-in SPDTswitch enables switching between HF & VHF/UHF
Special, Dual Purpose Cable is NOT included as a free CBL IC13HVURYRASCAL Kit &
FREE cable
$ 29.95
RQRP+INDEX LABS "QRP+" RASCAL kit & CABLE CABLE ONLY JST245
Order Number
Description (Transceiver model)
RASCAL GLX & FREE CABLE
RASCAL Kit &
FREE cable
$ 29.95
RJST245Japnese Radio Corp, model "JST-245"
RASCAL kit & CABLE CABLE ONLY KENWOOD
Order Number
Description (Transceiver model)
RASCAL GLX & FREE CABLE
RASCAL Kit &
FREE cable
$ 29.95
RKW8MKENWOOD Transceivers with 8 pin Screw-On mic & Ext Spkr I/O
KENWOOD models: TM-201, TM-221, TM-231, TM-241, TM-2530, TM-401, TM-421, TM-431, TM-441, TM-531, TM-541, TM-621, TM-631, TM-701, TM-721, TM-731, TR-3200, TR-50, TS-50/S, TS-60, TS-751, TS-851, TS-140, TS-430, TS-440, TS-450, TS-660, TS-670, TS-680, TS-690, TS-701, TS-711, TS-780, TS-790, TS-811, TS-850, TS-870, TS-930, TS-940, TS-950, TW-4000, 4100, and Kenwood transceivers with 8 pin screw-on Mic connectorsRASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RKW13RYKenwood Transceivers with 13 pin DIN accy jack. w/ FSK "pin." YES, It includes TS-2000 TS-140, TS-450, TS-570, TS-670, TS-680, TS-690, TS-711, TS-790, TS-811, TS-850, TS-870, TS-950, and Kenwood transceivers with 13 pin DIN accessory jacks.
Early Kenwood (940 & 440 below) transceivers with 13 pin DIN Accessory Jacks see CBL KW40-13
For TS-850 FSK operation, see CBL KW13RY"R" below.RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RKW13RYRKenwood TS-850 and KW Transceivers with 13 pin DIN accy and "FSK RCA Jack" For TS-850 Kenwood transceivers with 13 pin DIN and RTTY/FSK "RCA Jack".
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RKW4013Early KENWOOD HF Transceivers with 13 pin DIN accessory jack TS-940, 440..
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RMDINKENWOOD Transceivers with 6 pin mini DIN (ISO standard) jack
(KENWOOD Models: TM-255, TM-455, TM-733, TM-833, TM-G707, TM-V7A, TM-G 707A, (Delta) D-700 and transceivers with 6 pin mini DIN data I/O)RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RTHF6KENWOOD HandHeld Transceivers with 3.5mm & 2.5mm "stereo" I/O
(KENWOOD Models: TH-F6A, TH-F7E and transceivers with similar I/O) TR-2600 HandHeld Transceivers with 3.5mm & 2.5mm
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RKW45KENWOOD HF and VHF Transceivers with (RJ45) MODULAR mic
TM-251, TM-2400, TM-255, TM-261, TM-451, TM-455, TM-461, TM-643, TM-732, TM-733, TM-741, TM-742, TM-833, TM-841, TM-842, TM-941, TM-942, and Kenwoods with RJ45 mic jacks
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RKW4MKENWOOD HF Transceivers w/4 pin screw-on mic & Ext Spkr jack
TS-120, TS-130, TS-180, TS-311, TS-510, TS-511, TS-520, TS-530, TS-600, TS-700, TS-770, TS-801, TS-820, TS-830, TS-900, TX-310, TR-1300, TR-2200, TR-5200, TR-2300, TR-7010, TR-7200, TR-7400, TR-7500, TR-8000, TR-8200, TR-8300, and more)
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RKW5MXKenwood TR 7600, TR 7625 and Kenwoods with with 5 pin Screw-On Mic and 3.5mm Ext Spkr jack.
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RKW6MKENWOOD HF Transceivers with 6 pin screw-on mic & Ext Spkr jack
TR-7730, TR-7750, TR-7800, TR-7850, TR-7930, TR-7950, TR-8400, TR-9000, TR-9130, TR-9500, and other Kenwood transceivers with 6 pin screw-on mic connectors
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RCWRASCAL to transceiver cable for hard-keyed CW operating RASCAL kit & CABLE CABLE ONLY KDK
Order Number
Description (Transceiver model)
RASCAL GLX & FREE CABLE
RASCAL Kit &
FREE cable
$ 29.95
RKDK4MXKDK Transceivers w/4 pin screw-on mic & Ext Spkr jack
RASCAL kit & CABLE CABLE ONLY MIDLAND
Order Number
Description (Transceiver model)
RASCAL GLX & FREE CABLE
RASCAL Kit &
FREE cable
$ 29.95
RMID4MXMidland Transceivers w/4 pin screw-on mic & Ext Spkr jack
RASCAL kit & CABLE CABLE ONLY RadioShack
Order Number
Description (Transceiver model)
RASCAL GLX & FREE CABLE
RASCAL Kit &
FREE cable
$ 29.95
RHTX10Radio Shack HTX-10
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RHTX100Radio Shack Model HTX-100
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RHTX242Radio Shack Model HTX-212, and HTX-242 or RS 45
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RHTX252Radio Shack HTX-252
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
R20Radio Shack HTX-202 & HTX-404
RASCAL kit & CABLE CABLE ONLY RCI Order Number
Description (Transceiver model)
RASCAL GLX & FREE CABLE
RASCAL Kit &
FREE cable
$ 29.95
RRCI6RCI 5054 and RCI radios with 6 pin screw-on MIC
This interface uses the 3.5mm external speaker jack for receive AF, and requires SwitchBox for SSTV.
RASCAL kit & CABLE CABLE ONLY SBE
Order Number
Description (Transceiver model)
RASCAL GLX & FREE CABLE
RASCAL Kit &
FREE cable
$ 29.95
RSBE34SIDEBAND ENGINEERS model SBE 34
This interface provides open-end connection for the SBE34 external speaker screws.. Tx AF input and PTT is to the 1/4" MIC jack.
RASCAL kit & CABLE CABLE ONLY SGC
Order Number
Description (Transceiver model)
RASCAL GLX & FREE CABLE
RASCAL Kit &
FREE cable
$ 29.95
R2020SGC model SG-2020
This interface uses the 3.5mm external speaker jack to extract receive audio.
RASCAL kit & CABLE CABLE ONLY Ten Tec
Order Number
Description (Transceiver model)
RASCAL GLX & FREE CABLE
RASCAL Kit &
FREE cable
$ 29.95
R5PDTen-Tec with 5 pin DIN data I/O accessory jack
Ten-Tec PEGASUS, Jupiter, (538), and radios with similar 5 pin DIN data I/O. 5 pin (standard) DIN to 5 pin DIN.
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RORIONTen-Tec ORION (565)
Ten-Tec Orion transceivers with AUX I/O, 8 pin DIN jack.
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
ROMNIFor Ten-Tec transceivers with; PTT, Tx IN, Rx IN RCA jacks: Ten-Tec OMNI V, & OMNI VI (Late Model Paragon, and Corsair) and transceivers with RCA jacks for ''Patch IN, Patch OUT, and PTT'' jacks.
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RTT25Ten-Tec transceivers with 1/4 inch Mic and Ext Spkr jacks:
Early Ten-Tec Triton 544, Argonaut 505, 509, 515, (*early Omni V see late model; R-TTOMNI) below), and other Ten-Tec HF Transceivers with 1/4 inch Stereo Mic I/O and 1/4 inch mono external speaker jack. NOTE: This interface cable works with other vintage transceivers; eg; Atlas, Swan,Drake, etc...
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RTT4MTen-Tec transceivers w/4 pin screw-on mic & 1/4" Ext Spkr I/O
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RCWRASCAL to transceiver cable for hard-keyed CW operating RASCAL kit & CABLE CABLE ONLY UNIDEN
Order Number
Description (Transceiver model)
RASCAL GLX & FREE CABLE
RASCAL Kit &
FREE cable
$ 29.95
RUNIDEN5MXUNIDEN and some HR2510 with 5 pin Screw-On Mic and Ext Spkr jack.
RASCAL kit & CABLE CABLE ONLY YAESU
Order Number
Description (Transceiver model)
RASCAL GLX & FREE CABLE
RASCAL Kit &
FREE cable
$ 29.95
RY8MYAESU transceivers with 8 pin (screw-on) mic input.
Receive audio be taken from the external speaker jack. YAESU models: FT-1, FT-77, FT-102, FT-107, FT-211, FT-290 MKII, FT-480, FT-690 MKII, FT-707S, FT-712, FT-726, FT-736, FT-747, FT-757, FT-767, FT-770, FT-840, FT-850, FT-790 MK II, FT-912, FT-980, FT-990, FT-1000, FT-2200, FT-2700, FT-5100, FT-7200, FT-840, FT-890, FT-4700, FT-212, FT-ONE-S, FT-650, 707, 712, 726, 736, 756, 767, 77, 790II, 700, 840, 890, 990, 1000D and MORE,
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RY4MYAESU transceivers with 4 pin (screw-on) mic input
Receive audio is from the external speaker jack. YAESU models: having 4 pin screw-on microphones.
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RMDINYAESU transceivers having a, 6 pin Mini DIN for data I/O
YAESU FT-817, FT-100, FT-897, FT-1500, FT-3000, FT-8000, FT 7800, FT-8100, FT-8500, and FT-857 etc.. and *FT-847 "VHF" port. FT-857, FT-897, FT-7100, FT-7800, FT-8100R, FT-840, FT-847 V-UHF, FT-890, FT-900.
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
R847HFYAESU FT-847 3.5mm HF Data I/O HF jack
For Yaesu FT-847 "HF" Data Jack (*NOTE: see CBL MDIN for 847 VHF operation
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RFT600YAESU FT-736, FT-600, FT-890, & Late Model FT-900. 3.5mm HF Data I/O HF jack
PTT is via RCA "PTT" Jack.
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RYXYAESU hand-held transceivers with 4 circuit, 3.5mm I/O jack.
YAESU FT-10, FT-40, FT-50, VX-1, VX-5, VX-150, and Yaesu handhelds with similar I/O. (NOT VX-7R !)
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RFT2500YAESU FT-2500M 2400 & Yaesu transceivers with similar I/O
YAESU FT-2500, 2500M, 2400, etc
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RFT2600YAESU FT-2600 & Yaesu transceivers with DB9f I/O
YAESU FT-2600, 2600M, etc
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RFT2800YAESU FT-2800 & Yaesu transceivers with RJ 12 Mic & 3.5mm Ext Spkr
YAESU FT-2800, 2800M, etc
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
R75767YAESU transceivers using the rear panel RCA jacks;
YAESU FT-102, FT-757, FT-767, FT-920, etc
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
R5PDYAESU FT-1000"Mark V" Transceiver PSK31 Interface
Use also with YAESU FT-920 (insure that data mode switch is in AFSK position) SPECIAL NOTE: Use the FT1000 MkV, "EASY SET" to configure 5 pin DIN, Packet jack, for USB. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RFT900eEarly model YAESU FT-900 and Yaesu transceivers with similar I/0 For LATE model FT-900, see CBL F600 above. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RFT990YAESU FT-990 and Yaesu transceivers with similar I/0 For FSK/RTTY operation, Use cable RFT4RY (see below, FSK only!)
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
R1000DYAESU FT-1000"D" Transceiver PSK31 Interface cable. "NOTE" Receive AF is at "RING" of 3.5mm plug.
For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)*
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
R1000MPYAESU FT-1000"MP" & Mark V Field, Transceiver PSK31 Interface cable "NOTE" Receive AF is at "TIP" of 3.5mm plug.
For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)*
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RFT4RYYAESU transceivers with 4 pin DIN RTTY jacks NOTE: This cable enables FSK/RTTY operation only with the RASCAL GLX and appropriate YAESU transceiver.
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RFT90RYAESU FT-90R, and Yaesu transceivers with RJ 12 Mic & 3.5mm Ext Spkr See special instructions in "CART" window.
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
R20YAESU FT-51R & Yaesu handhelds with similar I/O
Yaesu handheld transceiver(s) using similar 2.5mm (TxAFSK/PTT) and 3.5mm (Rx AF) "mono" I/O
RASCAL kit & CABLE CABLE ONLY RASCAL Kit &
FREE cable
$ 29.95
RCWRASCAL to transceiver cable for hard-keyed CW operating Order CW is supplied with 3.5 and 1/4" plugs to CW jacks RASCAL kit & CABLE CABLE ONLY UP CLOSE AND PERSONAL: Read this now !
When operating PSK31, SSTV, RTTY, etc using your PC sound card; READ close and understand these digital operating rules.
You should always set the RASCAL and SoundCard gain (transmit) controls of your transceiver at 50% or less than half its rated power output.
Most HF transceivers are NOT rated for 100% duty cycle in key-down modes. PSK31, SSTV, & RTTY are KEY DOWN modes. I've learned this lesson long ago... the hard way. These settings may change a small amount as you move from one band to another.
When operating PSK31, SSTV, or RTTY/FSK on the HF bands:
Don't use the audio speech processor, turn it OFF.
Don't drive your transceiver into ALC action.
Don't run your transceiver at full RF output power, adjust output power to 50% or less of its rated power output.
The HF PSK31 frequencies are as follows:
160 meters - 1.807 80 meters - 3.580 40 meters - 7.070
30 meters - 10.140 20 meters - 14.070 Beginners, Start Here.
15 meters - 21.070 10 meters - 28.120Operation of PSK31 is typically in USB mode, thus the actual operating frequencies will range from the lower frequency, upward by three (3) kHz. In theory, this means that you can plunk a hundred, 31 Hz, PSK31 signals into the same spectrum as one SSB signal might occupy.
RASCAL/MIC Switch for transceivers without an accessory jack. EZ switch'n between MIC and RASCAL, Just Flip the switch. It's great when operating SSTV, and modes requiring both voice and digital interaction. The 5 pin DIN at "A" plugs into the RASCAL I/O jack, the Screw-On connector at "B" connects to the radio mic jack. The 3.5mm (1/8") plug at "D" plugs into the (Ext Spkr) "Y" connector (included), and the Radio Microphone connects to the MIC jack at "C".Overall length is nine (9') feet.
Alinco 8 pin Screw On MIC 29.95 ARS8
Icom 8 pin Screw On MIC 29.95 IRS8
Icom 8 pin RJ45 MIC 29.95 IRS45
Kenwood 8 pin Screw On MIC 29.95 KRS8
Kenwood 4 pin Screw On MIC 29.95 KRS4
Yaesu 8 pin Screw On MIC 29.95 YRS8
Alinco 8 pin Screw On MIC 29.95 ARS8
Icom 8 pin Screw On MIC 29.95 IRS8
Icom 8 pin RJ45 MIC 29.95 IRS45
Kenwood 8 pin Screw On MIC 29.95 KRS8Kenwood 4 pin Screw On MIC 29.95 KRS4
Yaesu 8 pin Screw On MIC 29.95 YRS8
Cables and Accessories
IMPORTANT NOTE; Prices of cable assemblies shown, do NOT include shipping & handling.
All orders are shipped within 24 hours of receiving, via USPS PRIORITY MAIL, FED-X Ground, or UPS.
Shipping & Handing added to each interface cable order: USA=$7.90, CANADA =$9.90, Foreign=$15.90Below are cable assemblies you can use to make your RASCAL GLX or TNC to Radio interface cables.
8 pin DIN male plug wired with 6 ft cable. All 8 pins are connected, wires are color coded, and include one drain/shield wire.
For use with ICOM, and radios with 8 pin DIN accessory jacks.May also be used to interface KAM and KAM PLUS HF ports to various transceivers.
ORDER 8D $4.99Make your own RASCAL GLX or TNC2 to Radio interface using this ready made cable. The 5DMX cable is 6 feet long, the 5 pin (male) DIN and 3.5mm external speaker plug are already attached and wired to the 5 pin DIN. All you add is the mating connector for the transceiver end. The cable is prepped with 1/2 inch of each wire exposed, and 1/8 inch bare wire stripped and solder tinned for easy radio plug installation. Cable is almond color.
$4.97 each, Order model 5DMX
This is our cable model "KVXT" which is used to make the TinyTrak, Kantronics VHF or 1200 baud cable, and in most cases, it may be used to fabricate the KAMxl cables.
You add only the transceiver MIC or Accessory connector. It is also used to make the
Tiny-Trak interface cable. All you add is the Radio or transceiver connector for the accessory, or Mic I/O.4.97
KVXT Pre-Fab Cable, diagram shown below.
SIX (6) foot shielded cable with all 8 wires attached to the 8 pin screw-on microphone connector.
Got a new "super-mic", or need to interface another device to the mic jack.... here's the solution.
13 pin DIN male plug wired with 6 ft (straight) cable. All 13 pins are connected, wires are color coded, and include one drain/shield wire.
For use with KENWOOD, ICOM, and radios with 13 pin DIN jacks.Temporarily Out Of Stock!
Similar to above, except has 4 pin screw-on mic connector and curly cord.
Curly cord extends to more than SIX (6) feet. Shielded cable with 4 plus shield/drain wires attached to the 4 pin screw-on microphone connector.
Got a new "super-mic", or need to interface another device to the mic jack.... here's the solution. $3.95 each, Model 4M
Microphone Extension Cables: EX8 and EX4:
EX8 has 8 pin screw-on Male on one end, and 8 pin Female on the opposite end. EX8 extends to 8 feet.
EX8, 9.97
EX4 has 4 pin screw-on Male on one end, and 4 pin Female on the opposite end. EX4 extends to 4 feet.
EX4, 8.97
AEA PK232 RAD1/RAD2 PREWIRED CABLE & CONNECTOR
This cable is six (6') feet long, wired to the 5 pin molex type connector for AEA PK232 Radio ports.
White wire = TX audio
Bare wire = Shield/Ground
Red wire = Push-To-Talk (PTT)
Blue wire = Receive Audio
Order Model A232CBL $3.99CLICK HERE for MORE AUDIO CABLES & CONNECTORS
DVM 810
VELLEMAN 810B. Here's a digital multimeter (DMM). Ideal for the Mountain-topper HAM Radio Operator, or technician. It has an LCD 3.5 digit readout
Features found on more expensive meters are standard on this DMM, they include:
* A transistor and diode tester
* DC Amperes* AC Amperes
* Overload protection
* 7 functions & 19 Ranges
* Includes 21" test leads and battery.
Ranges to: 1000 Volts DC, 750 Volts AC, Amps DC, Resistance to 2,000,000 OhmsOrder DVM810
$ 8.89
Each tube contains 110 Inches of 60/40, Rosin Core, Electronics Solder. Always looking for that elusive piece of solder.... keep several of these tubes nearby. They're easy to spot with the bright yellow top. 110 Inches, .04 Diameter, 60/40 ROSIN CORE SOLDER
99 cents each 'SOLDER'99 cents each 'SOLDER'
Make your own RASCAL GLX or TNC2 to Radio interface using this ready made cable. The 5DMX cable is 6 feet long, the 5 pin (male) DIN and 3.5mm external speaker plug are already attached and wired to the 5 pin DIN. All you add is the mating connector for the transceiver end. The cable is prepped with 1/2 inch of each wire exposed, and 1/8 inch bare wire stripped and solder tinned for easy radio plug installation. Cable is almond color.
$4.97 each, Order model 5DMXKVXT Pre-Fab Cable, diagram shown below.
SIX (6) foot shielded cable with all 8 wires attached to the 8 pin screw-on microphone connector.
Got a new "super-mic", or need to interface another device to the mic jack.... here's the solution.
Curly cord extends to more than SIX (6) feet. Shielded cable with 4 plus shield/drain wires attached to the 4 pin screw-on microphone connector.
Got a new "super-mic", or need to interface another device to the mic jack.... here's the solution.
$3.95 each, Order Model 4M
13 pin DIN male plug wired with 6 ft (straight)
cable. All 13 pins are connected, wires are color coded, and include one drain/shield wire.
For use with KENWOOD, ICOM, and radios with 13 pin DIN jacks.
4 circuit, 3.5mm Plug and Coiled Cable
For YAESU VX-1, VX-5, FT-10, FT-40, & FT-50, etc...
Tip = 1
Ring 1 = 2
Ring 2 = 3
Sleeve = 4
Order Model. VX4 $5.90
The solution for TNC to H-T interfacing for mobile and portable APRS operation. Of course, it makes a heavy-duty replacement cable for the Speaker-Mic. Standard Mic/Earphone 2.5mm & 3.5mm molded plug spacing. Easily extends more than six feet.
Small tip = RED,
Small Sleeve=Shield/Black
Large Tip = Yellow,
Large Sleeve = WhiteOrder No. 34558 $5.90
Stereo "Y" connector, also works great with MONO applications, as "ring" is not used when connected into mono jack.
Use with TNC / KPC/KAM when using external speaker jack. Allows both the TNC and External Speaker for receive audio.
RASCAL & SOUND CARD uses 2, YCONN
Sound card six ft male to female stereo extender cables
(1/8") or 3.5mm stereo male, to 3.5mm stereo female, shielded extension cable. These are 6 ft, high-quality, stereo cables. Great for sound card stereo extensions to RASCAL Line IN and Line OUT or MIC IN/SPKR OUT jacks.
Order 35MFSTX $1.49 each
Order 2 for sound card applications.
RASCAL TO PC EXTENDER KIT
This cable kit allows you to space your PC and transceiver more than 15 feet apart. This kit contains:
One (1) db9 female, to db9 male cable 6 feet, serial comport cable, and
Two (2) 3.5mm stereo female to male, sound card cables.Combined with the 6 ft RASCAL to transceiver cables, and 6 ft, RASCAL GLX to PC cables, you can separate the radio and PC more than 15 feet.
Make your own CBL, using this ready made cable. The 5DMX cable is 6 feet long, the 5 pin (male) DIN and 3.5mm external speaker plug are already attached and wired to the 5 pin DIN. All you add is the mating connector for the transceiver/radio end of the cable. The cable is already prepped with 1/2 inch of each wire exposed, and 1/8 inch bare wire stripped, and solder tinned for easy attaching to your radio mating plug.
$4.97 each, Order model 5DMX Add To Cart
10 feet long, Category 5 Cable (Unshielded Twisted Pair) A multipair (usually 4 pair) high performance cable that consists of twisted pair conductors, used mainly for data transmission. Note: The twisting of the pairs gives the cable a certain amount of immunity from the infiltration of unwanted interference.
Basic cat 5 cable was designed for characteristics of up to 100 MHz. Category 5 cable is typically used for Ethernet networks running at 10 or 100 Mbps.
Use for Mic Cable to Radios with RJ45 Mic I/O
CAT5E10FT 2.99
Use with RJ45 Switch Box below.
10 feet long, Category 5 E Shielded Cable (enhanced/Shielded) Same as Category 5, except that it is made to somewhat more stringent standards The Category 5 E standard is now officially part of the 568A standard.
Category 5 E is recommended for all new installations, and was designed for transmission speeds of up to 1 gigabit per second (Gigabit Ethernet).
Use for Mic Cable to Radios with RJ45 Mic I/O
CAT5ES10FT 3.99
Use with RJ45 Switch Box below.RJ45 SWITCH BOX
Switch between your RJ45 Mic and RASCAL GLX, Two RJ45 INPUTS with output to your transceiver. Ideal For RASCAL GLX to radios with RJ45 (modular 8 pin) jack. SSTV to MIC switching, etc.
• Metal Casing, Fully Shielded
• Rotary Switch for Extended use
• All Female Connectors 8 pos, 8cond
• Gold Plated Contacts Ensure Signal Integrity
• 14.97 Order RJ45SW1-2$14.97
Order RJ45SW12
You can use this box to switch between four serial comports of your PC(s), or if you have only one serial comport, use the SW5 to switch between the RASCAL and other serial I/O devices. The SW5 is so versitle, it can be used as a monitor switchbox via the 15 pin I/O ports. .
Reg 44.95BUX COMM price $ 19.99 INCLUDES 1 (FREE) RASCAL TO SW5 CABLE.
SW5, $19.99 eachFive (5) pin DIN to 4 RCA male plugs. 36" shielded leads molded as one cable.
RASCAL GLX Color Designators:
Pin 1 to RED = Transmit Audio
Pin 2 to Shld = Ground/Shield
Pin 3 to Yellow = PTT
Pin 4 to Black = Receive Audio
Pin 5 to White = RTTY or CW line*
*(depends on software)
$14.97 5D4RCA←See RASCAL notes at left .
$9.97 5D4RCA
Six (6) ft, 5 pin DIN, male to female cable. This cable is used as an extension from the RASCAL GLX to the matching RASCAL to Radio CBL. The BUX COMM 5D6MF has hundreds of other uses and applications. $6.97 Order 5D6MF ↓
↓ 6.97 Order 5D6MF
American Flag, BUX COMM PEN Has our name, address, and web page address embossed on it.
Keep our web page address handy. FREE with $100.oo orderOur Shipping and Handling charges are based on the following table:
For shipments to destinations within the continental USA and CANADA
For Orders 0 to 2 pounds, $7.90 added to total.
For Orders 2 to 5 pounds, $9.90 added to total.
For Orders 5 to 10 pounds, $11.90 added to total.
For Orders 10 to 20 pounds, $15.90 added to total.
For Orders 20 to 55 pounds, $28.90 added to total.Foreign orders, 0 to 2 pounds, $15.90. Sorry, due to loss and damage, No antennas shipped outside the continental USA
Call our toll-free OrderLine:
1 866
300 1969 Monday > Friday 9:AM
to 4:PM,
Saturday,
1 800 726 2919, ORDERS ONLY toll FREE
12 noon > 6 pm
eastern
time
We Accept;
All text and graphics on these pages are ©®™ of G. E. Rogers Sr and BUX COMM Corp 1986 - 2005
CLICK HERE to download RASCAL GLX to REPEATER interface Instructions via EchoLink
