POWER CONNECTORS, CABLES, and BINDING POSTS 

Model CB-8  Our most popular Power Cable/Connector combo with dual, heavy duty, in-line fuse holders and fuses.  IN STOCK, Ready to ship !   Kenwood TS-450, 2000 etc, Order Model  CB8
Icom 706 etc..  =        Order Model  CB8
ALINCO DX-70  =       Order Model  CB8
RCI-2970          =       Order Model  CB8
Various Yaesu & Icom (706 etc) transceivers (verify connector)   Regular. 24.95    Price $14.97  

DC connector only, for many Kenwood, Alinco, Icom, and YAESU transceivers.  Less cable & fuse holder.    SOCB8  $2.97 each  DEALERS, Notice;  10,  SOCB8 for 24.97  

SOCB-8  $2.97

SOCB-8x 10 for 24.97

IC2000 POWER CABLE, and connectors.. also fits other  Icom, Alinco, Kenwood, and Radio Shack transceivers with similar power input plugs.  Power plug and cable wired with two fuse holders, 10 ampere fuses and 15 feet of heavy wire installed.  Uses same plug and jack as shown above(top of this colum). $11.95 Order IC2000 

"T" type MALE and FEMALE,  DC Input connector for many late model ICOM, Radio Shack, some ALINCO and Amateur Radio transceivers having similar DC input connector.   Order  No. IC-1    $3.95

Monster power cable, number 10 RED and Black wire, 4 feet long. Qwik-Disconnect, Heavy-duty, polarized, connectors attached.

CB9        Uniden HR-2510 
Order CB-9  Regular. 24.95    Price $16.97

DC (coax style) Power connectors.  3 per pack, one of each size shown. @ .99 cents.

3,  CA120 = 2.1mm, 2.5mm, 1.3mm

OR you can also buy 3 of one kind.

3,  CA121 = 2.1mm ID

3,  CA123 = 2.5mm ID

3,  CA124 = 1.3mm ID

SEE POWER JACKS BELOW.

CA120 = 2.1mm, 2.5mm, 1.3mm
.99 

OR you can buy 3 of one size.

3,  CA121 = 2.1mm ID
.99

3,  CA123 = 2.5mm ID
.99

3,  CA124 = 1.3mm ID
.99

Normally closed shunt opens when plug is inserted. 2.5mm pin. Molded DC power jack. P.C. mount or solder pins.  (Mates with CA123 above)  Order # DCJ123

Normally closed shunt opens when plug is inserted. 2.1mm pin. Molded DC power jack. P.C. mount or solder pins.  (Mates with CA121 above)  Order # DCJ121

 Heavy-Duty Power Input Jack
Same size as the power input jack on most Packet Radio TNC and Kantronic KPC/KAM.  Can be wired for "open/closed-circuit" or standard power input.    Mounting hardware is included. 2 for 99 cents  PWRJAK

Specifications:
for chassis mounting
solder connections
with switch,
dimensions: 2.1mm / 5.5mm

12V TWIN CAR CIGARETTE LIGHTER SOCKET WITH LED INDICATOR TO SHOW POWER READY/IN-USE. Comes in blister pak 

Specifications with LED voltage indicators

$6.95 Order Code: PLUGC3
 

This Curly power cord has the three (3) most popular power plug adapters that fit most Radar Detectors, TNCs, and most Hand-Held radios.

$8.95 Order Code: RG317  

Order  CB2-P $3.95 each CB2-P Same as CB2, except has cigarette

ORDER  CB5  $2.95 each   CB5 is three wire, 3 pin socket, white three pin/socket connector with in-line fuse holder.  Sockets are flat-side, round keyed to preserve polarity.

ORDER CB5-P  $3.95 each  CB5P is three wire, 3 pin socket, white three pin/socket connector with in-line fuse holder, and cigarette lighter plug.  Sockets are flat-side, round keyed to preserve polarity.

ORDER  CB6  $2.95 each   CB6P is two wire, 3 pin socket, white three pin/socket connector with in-line fuse holder.  Sockets are flat-side, round keyed to preserve polarity.

ORDER CB6-P $3.95 each  CB5P is two wire, 3 pin socket, white three pin/socket connector with cigarette lighter plug.  Sockets are flat-side, round keyed to preserve polarity.

Order CB2CMT 99 cents each   Chassi mount mate to CB2 or CB2-P.  Solder plug pin post, and keyed with dimple to preserve polarity

.99 each

.99 each

Field Day, Some Day, Any Day.. or for the RV, here is a cigarette lighter receptacle with battery clips attached.  This connection enables you to power an external 12 VDC device from your 12 volt DC vehicle battery.  Leads and battery CLIPS are colored RED (positive) and BLACK (negative).ORDER No. CIGCLIP Reg. $7.95  Price $1.99  

Every Ham-shack, and commercial radio shop will find this to be one of the best bargains on this page.  Now you have a complete selection in one assortment. Splices, Spade, single-hole, bare, Red, Blue, Push-on accessory terminal, and many more.  Number 4-6 spade connectors, for number 16, 18, & 20 wire.  Number 6-8 spade connectors, for number 16, 18, & 20 wire. Number 4-6 round connectors, for number 16, 18, & 20 wire. Bag of more than one (100) terminals $1.99 bag,  100TERM

SOLID BRASS BINDING POSTS.  Sold in pairs only, One RED banded, and one BLACK banded.  These are the heavy-duty binding posts we use on our BUX BALUN 41 and BUX BALUN 11.  Also used in homes for sound and speaker drops for high-wattage sound systems.  Complete with hard-brass mounting hardware.  Ends and side holes are machined to accept standard size banana plugs.  ONE RED (ring) & ONE BLACK (ring) (PAIR) $2.99, 

Binding Posts Pair, One  RED and One BLACK. With all mounting hardware. One RED and One BLACK for plugs shown below $1.97  Order BPAIR

AGC IN-LINE WATERPROOF FUSEHOLDER  (3AG & AGC)
This fuse holder is ideal for boats and power leads that need a moisture barrier to seal from water and saline environments.  In-line waterproof fuseholder for AGC / 3AG fuses (1/4" x 1 1/4"). Yellow rubber boot. Fuse ends crimp to wire size, from #12 to #18 AWG.
$ 2.97 each  Order  No. WPFH 

Heavy Duty automotive, ATC blade type Fuse-Holder with weather proof cover. ATC In-Line, weatherproof cover, and 6 inch # 10 wire leads.  Perfect for that mobile linear, or power to the transceiver.  HDAFH

10 for 16.95

Fuses

4/.99, 10 Amp
 
4/.99, 20 Amp

4/.99, 30 Amp
 

Set screws in each end can be clamped to number 4 to 8 wire

9.95

This is the Super Fuse Holder and # 8 wire you've been looking for, to power to that mobile linear, or DC power amplifier.  20 inches of # 8 stranded wire, and bakelite holder. Uses large "AGU" fuses shown below. $4.97 FHAGU8 

"AGU" FUSES These are the bigg'uns. Fits FHAGU8    (5AG)
 

Secondary Lightning Protector
Remember the axiom; "An ounce of prevention is worth a pound of cure."  We offer this device as a secondary radio protector.  This lightning protector contains a modified spark gap that provides that ounce of prevention. There is no substitute for a good earth ground, AC line surge, and spike protection.  Keep all ground leads as short as possible.  Where lightning is involved, we make no warranties.  $ 4.97 each   7516

Security (dummy) Camera.

Features:  Excellent imitation of a real security camera with motion sensor motorized pan movement.  LED lights and it follows movement when  motion is detected.  No wiring needed. 

Order Code,  BCAM

7 amp contacts @ 150 V.

1.95 GREEN

or

1.95 YELLOW