Tell your friends, you found it at:

Serving Telecommunications and HAM Radio since 1969
Monday thru Friday 9am to 4pm Eastern, Call Toll-free, 1 866 300 1969  & 1 800 726 2919 Orders Only!  

  We accept:  

Radio And Sound Card Adapter Link��  "GLX "

This page has RASCAL GLX sound-card interfaces paired with Free RASCAL to transceiver cables for specific transceiver make and models.  Scroll to the section that displays the make of your transceiver,    Then look under  Description (Transceiver model) section for your model.   Simply select the button that corresponds to your radio make and model.   When you've pressed the button the "Purchase/View Cart/Continue Shopping" screen appears.   Before you click PURCHASE, be sure to select your RASCAL COLOR from the drop-down menu.    All items are In stock, ready to ship.   Additional CBLs may be ordered on another page, via the SHOPPING CART @ $19.97 each.  You may also use "Ctrl F" to FIND the section on this page for your radio manufacturers name or your transceiver model number.

FREE WITH EACH RASCAL GLX, a CD ROM with more than 400 MegaBytes of  soundcard digital software, data files, and documentation.  FREE; RASCAL to Transceiver interface cable, audio cables, RS-232 serial cable.  Choose your FREE RASCAL GLX to Transceiver (Radio) cable from the cable list further down this page.  Connect this new 2006 RASCAL GLX sound card interface between your rig and computer and enjoy operating the digital modes.    Everything you need, and Best of all, NO external power (NO wall-wart) needed, so the RASCAL GLX is the ideal sound card interface for portable or field day operating: PSK31, SSTV, PACKET, MT63, RTTY/FSK, RTTY/AFSK, eQSO, EchoLink, iLink, APRS, and CW operation.  Operation is fully automatic Push-To-Talk (PTT) and audio control.  Isolation transformers matches sound card audio to eliminate ground loops.  The only Sound Card to transceiver with cables available for  transceivers to use either MIC or Accessory inputs/outputs. The RASCAL GLX is supplied with a FREE cable tailored for your transceiver.  Now you can operate the sound card modes without buying additional interfaces.  Simply change from your HF transceiver to the VHF/UHF transceiver by unplugging one cable and inserting a cable for a different transceiver. By using transformer isolation for the transmit and Receive audio paths, we prevent ground loop coupling, and reduce the chance of RF feedback into the PC sound card (squeals, hum, etc).  To further reduce RF feedback and RF ingress into the Tx or Rx sound card audio, we install a large (molded) ferrite core over the RASCAL to sound card audio I/O cable(s). The end result is clean, clear, audio, reproduction on-the-air. An added benefit of these preventive measures is IMD reduction.  RASCAL��GLX, are in-stock, tested, and ready to ship, same day order is received !
For the operator with sound card I/O, but only MIC IN, and SPEAKER OUT.  Use this 40 db attenuator between RASCAL out, and sound card MIC IN. $ 7.97 Order   40DBPAD
FOR PC's with USB ports only ↓ (No serial comport) or if you have the late model LapTop withouta serial comport on it!  Not a problem;  we have the USB2SC comport adapter for 23.95.   Shown here with the RASCAL GLXBU.  Now you can have the best of both worlds, USB or Serial port operation !  USB to Serial Adapter     $ 23.95
NOTE:  The data input/output jack (6 pin Mini DIN) shown here is now in use on most all Alinco, ICOM, Kenwood, Yaesu and other recent make and model transceivers.  TM-255, TM-455, TM-G707, TM-D700x, TM-V7, TS-480, TM-733, TM-833, TM-G707, TM-V7A, (Delta) D-700, 480hx, FT-100, FT-817, FT-857, FT-897, FT-7100, FT-7800, FT-8100R, FT-840, FT-847 V-UHF, FT-890, FT-900,  FT-1500, FT-3000, FT-8500, IC-2720H, IC-2725E,  706 MK II,  IC-207H, IC-208H,  AZDEN PCS 9000      Order   RMDIN
We test all cables before they are packed for shipping.
ALINCO  We Accept
Order  Number for RASCAL & FREE CABLE	Description (Transceiver model)		RASCAL GLX & FREE CABLE
RASCAL GLX &  this FREE cable $ 39.95  RAK8M	DX-77T,  DX-70TH,  DR-110T,  DR-130T,  DR-410T,  DR-510T,  DR.112T,  DR-570T,  DR-590, DR-592,  DR-599, DR-600,  DR-430T,  DR135T/EMKII,  DR-235T/TG,  DR-435T/TG,  DR-620T,  DR-M06TH,  DR-M03SX, ALR-22T,  ALR-22HT,  ALR-72T,  ALD-24T,				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RDJ25S	DJ-120,  DJ-160/460,  DJ-100,  DJ-120  DJ-200 DJ-500,  DJ-C1T,  C4T,  C5T,				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 R20	Alinco Hand-Helds with 2.5mm & 3.5mm I/O DJ180/480,  DJ-196(DJ-195/296/496,  DJ-F1/F4,  DJ-S1/S4, DJ-160,  DJ-460,  DJ-162,  DJ-560,  ALM-203T,  ALR-206,  DJ-180T,   DJ-280T,   DJ-480T, DJ-580T,  DJ-191T,				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RAL45	DR-140,  DR-605,				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RAL6A	Alinco 8 pin screw-on mic with receive at pin 6 of Mic I/O. For ALINCO models: DX-77,  DR-119,  DR-1200				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RAL135	Alinco DR-135 DataRadio				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RMDIN	BUX NOTICE: Throughout our web pages, you'll see references to the 6 pin Mini DIN. This is the latest attempt by the ISO 9002 committee, to establish a "standard" for 1200 and 9600 baud I/O with PTT. If your radio has this jack as an I/O, this is the port to use for the digital modes, as it enables leaving your microphone connected. If your transceiver supports this 6 pin Mini DIN I/O, then consider using our cable model, "RMDIN" with the RASCAL GLX.  By using this jack you've enabled simultaneous use of the digital modes and voice operation.  (some transceivers require "menu selection" to activate this I/O).				RASCAL & CABLE
					CABLE ONLY
AZDEN   We Accept
Order  Number	Description (Transceiver model)		RASCAL GLX & FREE CABLE
RASCAL GLX &  this FREE cable $ 39.95 RMDIN	AZDEN 6 pin Mini DIN  for PCS 9000 Data Port				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RAZMX	AZDEN transceivers with 8 pin screw-on mic and 3.5mm Ext Spkr plug				RASCAL & CABLE
					CABLE ONLY
COLLINS   We Accept
Order  Number	Description (Transceiver model)		RASCAL GLX & FREE CABLE
RASCAL GLX &  this FREE cable $ 39.95 R75767	Transceivers with Patch IN, Patch OUT, and PTT RCA jacks				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RCW	RASCAL to transceiver cable for hard-keyed CW operating		Order CW is supplied with 3.5 and 1/4" plugs to CW jacks		RASCAL & CABLE
					CABLE ONLY
DRAKE    We Accept
Order  Number	Description (Transceiver model)		RASCAL GLX & FREE CABLE
RASCAL GLX &  this FREE cable $ 39.95 RTR7	DRAKE 4 pin screw-on mic with 3.5mm (1/8") Ext Spkr jack Models  TR-7 or TR-7/A, and some  TR-22, TR-33, TR-7, UV-3 radios				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RTT25	DRAKE TR-4, TR-4C, TR-4CW, and TR-6 radios.  Only  the standard 1/4 inch Stereo plugs are supplied!  SwitchCraft 230 (Collins) type 3-circuit MIC plug are NOT included.  Similar interface to Drake "TWINS." (R4B & TX4B)				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RCW	RASCAL to transceiver cable for hard-keyed CW operating				RASCAL & CABLE
					CABLE ONLY
ICOM    We Accept
Order  Number	Description (Transceiver model)		RASCAL GLX & FREE CABLE
RASCAL GLX &  this FREE cable $ 39.95 RIC8MX	ICOM HF, VHF,/UHF Transceivers w/8 pin Screw-On MIC & Ext Spkr jack.      ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746,  756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics.  Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751,				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RIC8PD	ICOM  HF-, Transceivers with 8 pin DIN accessory jack ICOM Models:  IC-275, IC-475, IC-721, IC-723, IC-725, IC-726, IC-728, IC-729, IC-732, IC-735, IC-736, IC-737, IC-737A, IC-738, IC-746, IC-746,<HF>IC746PRO, IC-756, IC-756PRO, IC-756PROII, IC 756proIII, IC-760/Pro, IC-761, IC-765, IC-775, IC-775DSP, IC-780, IC-781, IC-820, IC-821H, IC-910H, IC-970E, IC-970H, IC-1275,  IC-2000 and other Icom transceivers with 8 pin DIN accessory I/O ports.  AND MORE !				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RIC13RY	ICOM   Transceivers with 13 pin DIN accessory jack w/ FSK pin. Wired for 160-6 meter (HF) use.   BEST CHOICE for Icom:  IC-703, IC-706 mk II G  IC-718, &  IC 7000;				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RIC13VU	ICOM  Transceivers with 13 pin DIN accessory jack wired for VHF/UHF operation   For Icom: IC-703, IC-706 mk II & IC-718, IC 7000 and ICOM transceivers with ACC jack.				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RMDIN	Six pin mini DIN (VHF) jack for the706 and, transceivers with this I/O  Most used for VHF operation with the 706 MK II, IC-207H and ICOMs with similar I/O				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RIC45	ICOM HF, VHF, and UHF transceivers with RJ-45 Modular Mic jacks ICOM models: IC-207H, 2720, 2800, 703, IC-706, IC-718, IC-V8000, IC-281, IC-381, IC-481, IC-681, IC-2000, IC-2100, 2350, 2340, and similar Icom I/O.  (Note: for 706 & 718, most ops prefer CBL IC13RY)				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RIC4M	ICOM HF-VHF Transceivers with 4 pin screw-on mic & Ext Spkr ICOM models IC-202, IC-215, IC-22S, IC-245, IC-280, IC-402, IC-502, etc...				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 R20	ICOM, handheld transceiver(s) with 2.5mm & 3.5mm jacks Icom W32A, W32E, IC-T7A, T7E, IC-T8A, T8E, and Icom Hand Helds with similar I/O. NOTE: Be sure your Hand-Held uses the same connector format: 2.5mm (TxAFSK/PTT) and 3.5mm (Rx AF).				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RCW	RASCAL to transceiver cable for hard-keyed CW operating				RASCAL & CABLE
					CABLE ONLY
706 MK II G to RASCAL GLX enables HF, VHF, UHF, PSK, SSTV, Packet, RTTY/FSK..etc     $29.97 Built-in SPDTswitch enables switching between HF & VHF/UHF  Special, Dual Purpose Cable is NOT included as a free CBL IC13HVURY
RASCAL GLX &  this FREE cable $ 39.95 RQRP+	INDEX LABS "QRP+"				RASCAL & CABLE
					CABLE ONLY
JST245     We Accept
Order  Number	Description (Transceiver model)		RASCAL GLX & FREE CABLE
RASCAL GLX &  this FREE cable $ 39.95 RJST245	Japnese Radio Corp, model "JST-245"				RASCAL & CABLE
					CABLE ONLY
KENWOOD    We Accept
Order  Number	Description (Transceiver model)		RASCAL GLX & FREE CABLE
RASCAL GLX &  this FREE cable $ 39.95 RKW8M	KENWOOD Transceivers with 8 pin Screw-On mic & Ext Spkr I/O KENWOOD models: TM-201, TM-221, TM-231, TM-241, TM-2530, TM-401, TM-421, TM-431, TM-441, TM-531, TM-541, TM-621, TM-631, TM-701, TM-721, TM-731, TR-3200, TR-50, TS-50/S, TS-60, TS-751, TS-851, TS-140, TS-430, TS-440, TS-450, TS-660, TS-670, TS-680, TS-690, TS-701, TS-711, TS-780, TS-790, TS-811, TS-850, TS-870, TS-930, TS-940, TS-950, TW-4000, 4100, and Kenwood transceivers with 8 pin screw-on Mic connectors				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RKW13RY	Kenwood  Transceivers with 13 pin DIN accy jack. w/ FSK "pin."   YES, It includes TS-2000  TS-140, TS-450, TS-570, TS-670, TS-680, TS-690, TS-711, TS-790, TS-811, TS-850, TS-870, TS-950, and Kenwood transceivers with 13 pin DIN accessory jacks. Early Kenwood (940 & 440 below) transceivers with 13 pin DIN Accessory Jacks see CBL KW40-13   For TS-850 FSK operation, see CBL KW13RY"R"  below.				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RKW13RYR	Kenwood TS-850 and KW Transceivers with 13 pin DIN accy and "FSK RCA Jack"  For TS-850 Kenwood transceivers with 13 pin DIN and RTTY/FSK "RCA Jack".				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RKW4013	Early KENWOOD HF Transceivers with 13 pin DIN accessory jack   TS-940, 440..				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RMDIN	KENWOOD Transceivers with 6 pin mini DIN (ISO standard) jack (KENWOOD Models: TM-255, TM-455, TM-733, TM-833, TM-G707, TM-V7A,  TM-G 707A, (Delta) D-700 and transceivers with 6 pin mini DIN data I/O)				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RTHF6	KENWOOD HandHeld Transceivers with 3.5mm & 2.5mm "stereo" I/O   (KENWOOD Models: TH-F6A, TH-F7E and transceivers with similar I/O) TR-2600 HandHeld Transceivers with 3.5mm & 2.5mm				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RKW45	KENWOOD HF and VHF Transceivers with (RJ45) MODULAR mic TM-251, TM-2400, TM-255, TM-261, TM-451, TM-455, TM-461, TM-643, TM-732, TM-733, TM-741, TM-742, TM-833, TM-841, TM-842, TM-941, TM-942, and Kenwoods with RJ45 mic jacks				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RKW4M	KENWOOD HF Transceivers w/4 pin screw-on mic & Ext Spkr jack TS-120, TS-130, TS-180, TS-311, TS-510, TS-511, TS-520, TS-530, TS-600, TS-700, TS-770, TS-801, TS-820, TS-830, TS-900, TX-310, TR-1300, TR-2200, TR-5200, TR-2300, TR-7010, TR-7200, TR-7400, TR-7500, TR-8000, TR-8200, TR-8300, and more)				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RKW5MX	Kenwood TR 7600, TR 7625 and Kenwoods with  with 5 pin Screw-On Mic and 3.5mm Ext Spkr jack.				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RKW6M	KENWOOD HF Transceivers with 6 pin screw-on mic & Ext Spkr jack TR-7730, TR-7750, TR-7800, TR-7850, TR-7930, TR-7950, TR-8400, TR-9000, TR-9130, TR-9500, and other Kenwood transceivers with 6 pin screw-on mic connectors				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RCW	RASCAL to transceiver cable for hard-keyed CW operating				RASCAL & CABLE
					CABLE ONLY
KDK    We Accept
Order  Number	Description (Transceiver model)		RASCAL GLX & FREE CABLE
RASCAL GLX &  this FREE cable $ 39.95 RKDK4MX	KDK Transceivers w/4 pin screw-on mic & Ext Spkr jack				RASCAL & CABLE
					CABLE ONLY
MIDLAND
Order  Number	Description (Transceiver model)		RASCAL GLX & FREE CABLE
RASCAL GLX &  this FREE cable $ 39.95 RMID4MX	Midland Transceivers w/4 pin screw-on mic & Ext Spkr jack				RASCAL & CABLE
					CABLE ONLY
Motorola
Order  Number	Description (Transceiver model)		RASCAL GLX & FREE CABLE
RASCAL GLX &  this FREE cable $ 39.95 RASCAL to RADIUS	Motorola RADIUS Transceivers w/RJ45 Modular Mic I/O				RASCAL & CABLE
RadioShack
Order  Number	Description (Transceiver model)		RASCAL GLX & FREE CABLE
RASCAL GLX &  this FREE cable $ 39.95 RHTX10	Radio Shack HTX-10				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RHTX100	Radio Shack Model HTX-100				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RHTX242	Radio Shack Model HTX-212, and HTX-242  or RS 45				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RHTX252	Radio Shack HTX-252				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 R20	Radio Shack HTX-202 & HTX-404				RASCAL & CABLE
					CABLE ONLY
RCI
Order  Number	Description (Transceiver model)		RASCAL GLX & FREE CABLE
RASCAL GLX &  this FREE cable $ 39.95 RRCI6	RCI 5054 and RCI radios with 6 pin screw-on MIC This interface uses the 3.5mm external speaker jack for receive AF, and requires SwitchBox for SSTV.				RASCAL & CABLE
					CABLE ONLY
SBE
Order  Number	Description (Transceiver model)		RASCAL GLX & FREE CABLE
RASCAL GLX &  this FREE cable $ 39.95 RSBE34	SIDEBAND ENGINEERS model SBE 34 This interface provides open-end connection for the SBE34  external speaker screws..  Tx AF input and PTT is to the 1/4"  MIC jack.				RASCAL & CABLE
					CABLE ONLY
SGC
Order  Number	Description (Transceiver model)		RASCAL GLX & FREE CABLE
RASCAL GLX &  this FREE cable $ 39.95 R2020	SGC model SG-2020 This interface uses the 3.5mm external speaker jack to extract receive audio.				RASCAL & CABLE
					CABLE ONLY
Ten Tec
Order  Number	Description (Transceiver model)		RASCAL GLX & FREE CABLE
RASCAL GLX &  this FREE cable $ 39.95 R5PD	Ten-Tec with 5 pin DIN data I/O accessory jack Ten-Tec PEGASUS,  Jupiter, (538),  and radios with similar 5 pin DIN data I/O. 5 pin (standard) DIN to 5 pin DIN.				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RORION	Ten-Tec ORION (565) Ten-Tec Orion transceivers with AUX I/O, 8 pin DIN jack.				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 ROMNI	For Ten-Tec transceivers with;  PTT,  Tx IN, Rx IN RCA jacks:  Ten-Tec OMNI V, & OMNI VI (Late Model Paragon, and Corsair) and transceivers with RCA jacks for ''Patch IN, Patch OUT, and PTT'' jacks.				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RTT25	Ten-Tec transceivers with 1/4 inch Mic and Ext Spkr jacks: Early Ten-Tec Triton 544,  Argonaut 505, 509, 515, (*early Omni V see late model; R-TTOMNI) below), and other Ten-Tec HF Transceivers with 1/4 inch Stereo Mic I/O and 1/4 inch mono external speaker jack.  NOTE: This interface cable works with other vintage transceivers; eg; Atlas, Swan,Drake, etc...				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RTT4M	Ten-Tec transceivers w/4 pin screw-on mic & 1/4" Ext Spkr I/O				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RCW	RASCAL to transceiver cable for hard-keyed CW operating				RASCAL & CABLE
					CABLE ONLY
UNIDEN
Order  Number	Description (Transceiver model)		RASCAL GLX & FREE CABLE
RASCAL GLX &  this FREE cable $ 39.95 RUNIDEN5MX	UNIDEN and some HR2510  with 5 pin Screw-On Mic and Ext Spkr jack.				RASCAL & CABLE
					CABLE ONLY
YAESU
Order  Number	Description (Transceiver model)		RASCAL GLX & FREE CABLE
RASCAL GLX &  this FREE cable $ 39.95 RY8M	YAESU transceivers with 8 pin (screw-on) mic input. Receive audio be taken from the external speaker jack.   YAESU models: FT-1, FT-77, FT-102, FT-107, FT-211, FT-290 MKII, FT-480, FT-690 MKII, FT-707S, FT-712, FT-726, FT-736, FT-747, FT-757, FT-767, FT-770, FT-840, FT-850, FT-790 MK II, FT-912, FT-980,  FT-990, FT-1000, FT-2200, FT-2700, FT-5100, FT-7200, FT-840, FT-890, FT-4700, FT-212, FT-ONE-S, FT-650, 707, 712, 726, 736, 756, 767, 77, 790II, 700, 840, 890, 990, 1000D  and MORE,				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RY4M	YAESU transceivers with 4 pin (screw-on) mic input Receive audio is from the external speaker jack.   YAESU models: having 4 pin screw-on microphones.				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RMDIN	YAESU transceivers having a, 6 pin Mini DIN for data I/O YAESU  FT-817,  FT-100, FT-897, FT-1500, FT-3000, FT-8000, FT 7800, FT-8100, FT-8500, and FT-857   etc.. and   *FT-847 "VHF" port.   FT-857, FT-897, FT-7100,   FT-840, FT-847 V-UHF, FT-890, FT-100, FT-817, FT-857, FT-897, FT-7100, FT-7800, FT-8100R, FT-840, FT-847 V-UHF, FT-890, FT-900,  FT-1500, FT-3000, FT-8500 FT-8800, & more Yaesu late models				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 R847HF	YAESU FT-847  3.5mm HF Data I/O HF jack For Yaesu FT-847 "HF"  Data Jack (*NOTE: see CBL MDIN for 847 VHF operation				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RFT600	YAESU FT-736, FT-600, FT-890, & Late Model FT-900.  3.5mm HF Data I/O HF jack PTT  is via RCA "PTT" Jack.				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RYX	YAESU hand-held transceivers with 4 circuit, 3.5mm I/O jack. YAESU  FT-10, FT-40, FT-50, VX-1, VX-5, VX-150, and Yaesu handhelds with similar I/O.   (NOT VX-7R   !)				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RFT2500	YAESU FT-2500M 2400 & Yaesu transceivers with similar I/O YAESU FT-2500, 2500M, 2400,  etc				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RFT2600	YAESU FT-2600 & Yaesu transceivers with   DB9f   I/O YAESU FT-2600, 2600M,  etc				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RFT2800	YAESU FT-2800 & Yaesu transceivers with   RJ 12 Mic & 3.5mm Ext Spkr  YAESU FT-2800, 2800M,  etc				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 R75767	YAESU transceivers using the rear panel RCA jacks; YAESU FT-102, FT-757, FT-767, FT-920, etc				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 R5PD	YAESU FT-1000"Mark V"  Transceiver PSK31 Interface   Use also with YAESU FT-920 (insure that data mode switch is in AFSK position)    SPECIAL NOTE: Use the FT1000 MkV, "EASY SET" to configure 5 pin DIN, Packet jack, for USB. For FSK/RTTY operation, Use cable CBL FT4RY  (see below, FSK only!)				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RFT900e	Early model YAESU FT-900 and Yaesu transceivers with similar I/0  For LATE model FT-900, see CBL F600 above. For FSK/RTTY operation, Use cable CBL FT4RY  (see below, FSK only!)				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RFT990	YAESU FT-990 and Yaesu transceivers with similar I/0 For FSK/RTTY operation, Use cable RFT4RY  (see below, FSK only!)				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 R1000D	YAESU FT-1000"D"  Transceiver PSK31 Interface cable.  "NOTE" Receive AF is at "RING" of 3.5mm plug. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)*				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 R1000MP	YAESU FT-1000"MP" & Mark V Field, Transceiver PSK31 Interface cable "NOTE" Receive AF is at "TIP" of 3.5mm plug. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)*				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RFT4RY	YAESU transceivers with 4 pin DIN RTTY jacks   NOTE:  This cable enables FSK/RTTY operation only with the RASCAL GLX and appropriate YAESU transceiver.				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RFT90R	YAESU FT-90R, and Yaesu transceivers with  RJ 12 Mic & 3.5mm Ext Spkr  See special instructions in "CART" window.				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 R20	YAESU  FT-51R, FT470, & Yaesu handhelds with similar I/O Yaesu handheld transceiver(s) using similar 2.5mm (TxAFSK/PTT)  and 3.5mm (Rx AF) "mono" I/O				RASCAL & CABLE
					CABLE ONLY
RASCAL GLX &  this FREE cable $ 39.95 RCW	RASCAL to transceiver cable for hard-keyed CW operating		Order CW is supplied with 3.5 and 1/4" plugs to CW jacks		RASCAL & CABLE
					CABLE ONLY
RASCAL ACCESSORIES
RASCAL GLX With 5 pin DIN plug for RASCAL end, other end is open end to radio for solder connections.  RASCAL GLX and  this FREE cable $ 39.95				RASCAL & OPEN END CABLE
UP CLOSE AND PERSONAL:   Read this now ! When operating PSK31, SSTV, RTTY, etc using your PC sound card;  READ close and understand these digital operating rules.  You should always set the RASCAL and SoundCard gain (transmit) controls of your transceiver at 50% or less than half its rated power output.   Most HF transceivers are NOT rated for 100% duty cycle in key-down modes.  PSK31, SSTV, & RTTY are KEY DOWN modes.   I've learned this lesson long ago... the hard way.   These settings may change a small amount as you move from one band to another. When operating PSK31, SSTV, or RTTY/FSK on the HF bands: Don't use the audio speech processor, turn it OFF. Don't drive your transceiver into ALC action.   Don't run your transceiver at full RF output power, adjust output power to 50% or less of its rated power output. Be sure you have your software configured correct. Insure that your RASCAL serial comport plug is inserted into the PC comport that is selected in the software "settings" icon. Reference WINPSK to initially set up RASCAL, PC and Radio.
The HF PSK31 frequencies are as follows: 160 meters - 1.807           80 meters - 3.580           40 meters - 7.070 30 meters - 10.140           20 meters - 14.070  Beginners, Start Here. 15 meters - 21.070           10 meters - 28.120 Operation of PSK31 is typically in USB mode, thus the actual operating frequencies will range from the lower frequency, upward by three (3) kHz.  In theory, this means that you can plunk a hundred, 31 Hz,  PSK31 signals into the same spectrum as one SSB signal might occupy.
RASCAL/MIC Switch for transceivers without an accessory jack.  EZ switch'n between MIC and RASCAL, Just Flip the switch.  It's great when operating SSTV, and modes requiring both voice and digital interaction.  The 5 pin DIN at "A" plugs into the RASCAL I/O jack, the Screw-On connector at "B" connects to the radio mic jack.  The 3.5mm (1/8") plug at "D" plugs into the (Ext Spkr) "Y" connector (included), and the Radio Microphone connects to the MIC jack at "C".Overall length is nine (9') feet. Alinco 8 pin Screw On MIC        29.95   ARS8  Icom    8 pin Screw On MIC       29.95   IRS8   Icom    8 pin RJ45 MIC               29.95  IRS45  Kenwood  8 pin Screw On MIC  29.95    KRS8 Kenwood  4 pin Screw On MIC  29.95    KRS4 Yaesu 8 pin Screw On MIC        29.95    YRS8
 Alinco 8 pin Screw On MIC    29.95  ARS8  Icom    8 pin Screw On MIC     29.95  IRS8   Icom    8 pin RJ45 MIC           29.95 IRS45  Kenwood  8 pin Screw On MIC  29.95   KRS8 Kenwood  4 pin Screw On MIC 29.95   KRS4 Yaesu 8 pin Screw On MIC       29.95   YRS8

So you bought one of those (brand X) interfaces that do not isolate the sound card receive audio (input/ Line IN).   This ISOL8R is what they forgot to include.  It will provide the isolation and help prevent HUM, STEREO If you only order one, order it for the Sound Card LINE OUT, to protect your Transmit audio from HUM.   ORDER 1, to isolate your transmit audio, 9.97  SISOL8R          SAVE and buy 2, CBL-ISOL8R , Use one for Sound Card IN, and one for SoundCard OUT.                                    ORDER 2, and save,  17.97 SISOL8RX2  Serving Telecommunications and HAM Radio since 1969 Saturday & Sunday, 1 800 726 2919, toll FREE order line only: 12 noon > 6 pm  eastern time Call our toll-free OrderLine: 1 866 300 1969 Monday > Friday 9:AM to 4:PM, When calling the Toll Free numbers, be sure to have your Order numbers ready,  All orders ship same business day

As a final note: Many times, an over-driven interface with no attenuator or 40 db pad, can be construed as noisy or distorted on-the-air audio.  In more than 85% of the soundcard or digital mode cases, the cure for this problem is to simply add a 40db pad as shown below. For the operator with sound card I/O, and a high-level SPEAKER OUT.  Use a 40 db attenuator . $ 7.95 Order 40DBPAD

CLICK HERE for → Solutions and Cures for Sound Card Hum Problems
A detailed, "PSK31 and Digital Mode Handbook for the Digital HAM Operator" is included on our new CD ROM. This CD ROM is complete with transceiver to PC sound card interface diagrams.  � 1999-2005 By Buck Rogers K4ABT NOTICE:  If your comport fails to activate PTT, your O/S may be holding the RTS line high.  If this is the case with your PC comport, the following may be the "fix" for PCees with this problem (running early versions of 2000, and XP upgrades): Download DLPORTIO which enables the proper operation of COMports and LPT ports running under Windows 2000 and XP upgrades.  Extract the three files from the dlportio.zip file into the same directory as your PSK, SSTV, or MMTTY software: Dlportio\dll\TDLPortIO.dll Dlportio\DriverLINX\drivers\DLPORTIO.dll Dlportio\DriverLINX\drivers\DLPORTIO.sys
Download RASCAL to EchoLink Manual	Download RASCAL to Icom 706 MK II G EchoLink Manual	Interface the RASCAL to Voice REPEATER via Echolink Manual
↓ RASCAL Support Accessories, Cables, Connectors, & Devices Below are cable assemblies you can use to make your RASCAL GLX or TNC to Radio interface cables and more.
USB to SERIAL Adapter  OK, so you have a new PC with only a USB port, and no serial port....  Not so, any more.  BUX Comm has the answer.  This USB to Serial comport converter meets the specs shown below, and enables  you to operate the RASCAL� interface(s) from a PC USB port.  Also enables the use of TNC I/O and other serial comport devices. Supports Windows� 98/2000/ME and CLICK HERE to Download XP drivers Installation driver CD (included) installs serial port instantly Supports baud rates from 1,200 to 115,200 K Great addition for the new LapTop that came without a serial comport. Drives the BUX Comm RASCAL"� for Auto-PTT in PSK31. etc. NOTE: A CD ROM containing the drivers for the USB2SC is inside the back panel of the USB converter package.  All drivers are also available from the SUPPORT OEM CLICK HERE:   USB2SC  Reg 59.95  BUXCOMM Amateur Net: $ 23.95ea DEALER INQUIRIES Call 434 534 8873
RASCAL TO PC EXTENDER KIT;  This cable kit allows you to space your PC and transceiver more than 15 feet apart.  This kit contains: One (1) db9 female, to db9 male cable 6 feet, serial comport cable,  and  Two (2) 3.5mm stereo female to male, sound card cables.  Combined with the 6 ft RASCAL to transceiver cables, and 6 ft, RASCAL GLX to PC cables, you can separate the radio and PC more than 15 feet. $4.99 Order Model  RXK

CLICK ON the down arrow for the Drop-Down Menu INDEX to our web pages. INDEX for BUXCOMM HAM Radio Antenna & Accessory Pages BACK HOME TO SITE INDEX RASCAL GLX and RASCAL to Radio Cables & Accessories Radio to TNC Cables and Accessories Base Station Antennas and Accessories Mobile Antennas, Mounts, and Accessories Antenna BALUNS, UNUN, and Mobile Antennas Couplers Wire & Cable, including Coaxial, Rotor, Antenna wire & Coax Seal RASCAL GLX, same as Wired & Tested RASCAL, but in kit form. Include all barts and instructions. RF Adapters, Connectors and Cables AUDIO Adapters, Connectors, and Cables The original WINDOM a true, Multi-Band Antenna Combine a pair of our single band HF Mobile tuneable-tip antennas and you have an ideal, single element, horizontal dipole (beam). POWER Cords, Connectors, Cables, and High-Power Binding Posts. TOOLS & TEST Equipment for the Electronics Technician, HAM Operator, and Hobbists METERS, DVM & SWR Technician, Electrician, and HAM Operator SWITCHES and RELAYS; Technicians, Electricians, and HAM Operator's Speakers, and Radio Mounting Hardware FUSE HOLDERS, Fuses & Equipment Lightning Protection The best deal on the internet, HAM Radio Replacement Microphones View RASCAL GLX & Mark V Radio to RASCAL interface cables Speakers, Transistors, EEPROMS, IC's, Opto-Couplers, RF PA Modules and More. More J-Pole / Jpole / J pole information in one place than you can imagine A "PSK31 PRIMER" FOR THE NEW PSK USER. The original BUXCOMM "ISO KIT" for PSK31, WSJT, & Sound Card Interface Home Page The Ham Radio Operator's Guide to Building HAM Radio Antennas PACKET RADIO; The Easy Way ! (a PacketRadio primer) By Buck Rogers K4ABT � G. E. "Buck" Rogers Sr., The definitions and meanings of the dialog used when discusing Packet Radio: applications, nodes, and networks. TNC to PC interface cable diagrams comports for data I/O and TNC control Another HAM Radio Operator's Antenna HANDBOOK Solving hum problems in PC soundcards and Ham Transceivers CB Replacement Microphones SOLAR POWER FOR AMATEUR RADIO STATIONS and REPEATER SITES. HAM Radio, Sound Card Freeware, Software System Node Operator's Guide to Building Packet Networks Configurations Parameters for the X-1J4 "TheNET" NODE PacketRadio System Node Operator's Guide to building, installing, and configuring TheNET X1J4 nodes. Equipment and Personnel Protection from lightning, a good ground system will reduce noise in your Packet Station, Here's what our customers say about BUX COMM & the RASCAL Returned goods policy: ALL ORDERS ARE SHIPPED WITHIN 24 HOURS OF RECEIPT, except Sundays and Holidays

Place Orders 7 days a week. Call "TOLL FREE"  1 866 300 1969
Now, BUX COMM is  Bigger, Better, with Faster, shipping from our three new and larger facilities !
Order Line # 2, Monday thru Friday, 10 AM  to  4 PM EDST, 1 434 534 8873  "ORDERS ONLY"
 All orders ship same business day if received before 3 pm EDST.

CLICK HERE and read our PSK31 tutorial for the new and seasoned PSK user. 

Although UPS and USPS rates have increased each year; Our Shipping and Handling charges have not increased since 2001.  USA & Canada rates are shown in the following table:

For shipments to destinations within the continental USA and CANADA
For Orders 0 to 2 pounds,        $7.90 added to total.
For Orders 2 to 5 pounds,        $9.90 added to total.
For Orders 5 to 10 pounds,      $11.90 added to total.
For Orders 10 to 20 pounds,    $15.90 added to total.
For Orders 20 to 55 pounds,    $28.90 added to total.

Call our toll-free OrderLine: 1 866 300 1969 Monday > Friday 9:AM to 4:PM,
Saturday, 1 800 726 2919, ORDERS ONLY  toll FREE  12 noon > 6 pm  eastern time
We Accept;

 All text and graphics on these pages are ��� of G. E. Rogers Sr and BUX COMM Corp 1986 - 2006
CLICK HERE for Shipping & Returns Policy
For tech support, Email: S U P P O R T @ B U X C O M M . c o m

BUX CommCo��
 115  LUENBURG  DRIVE
 EVINGTON,  VIRGINIA  24550