Tell your friends, you found it at:
��
Serving HAM Radio
and Telecommunications since 1969
Monday thru Saturday 9am to 4pm
Eastern Time,
Call Toll-free,
1 866 300 1969
and 1 800 726 2919
Orders Only!
BUXCOMM accepts:
The WORLD'S MOST Complete &
Comprehensive List of
Drawings for RADIO to TNC "Packet" Interface Cables
by
Buck Rogers K4ABT "We've Interfaced more TNC's to
transceivers than anyone else in the world !"
Special Constructed Cables
TinyTrak, AMI-2, EchoLink, and Special Built CablesTheNET X1J4 Revison 5 EPROM for NODE Our Most Popular Selling TNC to Radio Cables
NOTE to KANTRONIC KAM and KPC
users:
When using a radio with "open squelch,"
or connecting to the accessory jack of your transceiver,
don't assume
that your cable is bad when in fact, you have the KPC or
KAM
Command; "cmd:" set to CD INTernal, when cmd: CD should be set
to SOFTWARE !
All cables are tested before shipping.
Sorry, we do not make cable selections nor do we choose or "suggest" a cable model, we are NOT responsible for an incorrect choice. Specific exchanges may be made using RMA numbers in accordance with our Shipping/Returns Policy. When placing phone orders, choose the model number(s) for the cable(s) you want.. BEFORE you call! Cables drawings are shown when you Click the ADD TO CART button. NOTICE
Although these interface cables have been tried and tested with related radios and controllers, we are not responsible for damages or errors. Be sure you've made the correct selection, and the cable you select, compares to the drawing shown for your radio and packet controller. No other warranty is expressed or implied! Be sure to include a description (Make/model), of your radio and TNC or KAM/KPC, in the space provided on the Secure, CHECK OUT form. Please be sure to use correct "Ship-To" Address, ZIPcode, Callsign, and *Phone number* (* UPS required). ALL INFORMATION IS KEPT CONFIDENTIAL, NO MAILING LISTS ARE SOLD, CONVEYED, OR OTHERWISE TRANSMITTED !
HI-QUALITY, Conntrolled Heat, Solder Station 350-900�F
Features :
manual temperature setting
electronic temperature control
power-on LED indication
with ground output
Specifications :
heater power for soldering iron: 50W
temperature variable control: 375-900�F
voltage supply: 115VAC
weight: 2.65 lbs.
dimensions: 7 1/4" x 3 31/32" x 3 1/2"
input power: 50VA max.
$ 24.90 Order VTSS5![]()
Spare soldering tip for above High Q soldering station. CAT# BITIP5 $ 1.89
Interface cables in this section are our most requested TNC to RADIO Cables. ↓
Alinco, ADI, & Kenwood transceivers with 8 pin screw-on mic and 3.5mm external speaker jack, to Kantronic KAM and KAM +, 8 pin HF port.
19.97 Model KH8AK8MX Alinco, ADI, & Kenwood transceivers with 8 pin screw-on mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port.
19.97 Model KVAK8MX Alinco, ADI, & Kenwood transceivers with 8 pin screw-on mic and 3.5mm external speaker jack, to MFJ & PacComm TNCees.
19.97 Model 5DAK8MX Alinco, DR 605 transceiver with 2.5mm and 3.5mm 9K6 jacks, to MFJ 1270CQ 9600, AEA PK-96, and PacComm 9k6 TNCees
19.97 Model 5DR605
![]()
Alinco, DR 605 transceiver with 2.5mm and 3.5mm 9K6 jacks, to Kantronic KPC-9612 Dsub 15 pin 9600 b/s port.
19.97 Model K9612605 ![]()
Alinco, transceivers with RJ 45, modular mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port.
19.97 Model KV98AL45 ![]()
Azden transceivers with 8 pin screw-on mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port
19.97 Model KVAZ8MX Azden transceivers with 8 pin screw-on mic and 3.5mm external speaker jack,to MFJ, PacComm, & Some AEA TNCees.
19.97 Model 5DAZ8MX
This cable and switch-box can switch to either of the bands of the IC 706 & IC 706 MKII G, HF, VHF, & UHF. Avaliable in three versions: A, B, & C
Model IC13HVUA, is for the IC 706 MkII to MFJ, PacCOMM, AEA PK-900, PK-96, PK-12, and TNCees with 5 pin DIN I/O.
This cable and switch-box can switch to either of the bands of the IC 706 & IC 706 MKII G, HF, VHF, & UHF.
Model IC13HVUB, for KANTRONIC 9 pin Dsub Radio port.
IC13HVUB
$29.95
This cable and switch-box can switch to either of the bands of the IC 706 & IC 706 MKII G, HF, VHF, & UHF. Avaliable in three versions: A, B, & C
Model IC13HVUC, for AEA PK 232 5 pin, single-inline Radio port(s) 1 & 2
IC13HVUC $29.95
ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O, to KANTRONICS KPC, and KAM Dsub 9. 19.95 Model KVMDIN
←BUX NOTE: Throughout our pages, you'll see references to the 6 pin Mini DIN. This is the latest attempt by the ISO 9002 committee, to establish a "standard" for 1200 and 9600 baud I/O with PTT. If your radio has this jack as an I/O, it is the port to use, as it permits having your microphone connected while operating the digital modes. Thus you have real-time use of the digital modes and voice operation.
AZDEN: PCS 9000
ICOM: IC-2720H, IC-2725E, 706 MK II, IC 718, IC-207H, and more Icom late models.
KENWOOD: TM-255, TM-455, TM-G707, TM-D700x, TM-V7, TS-480, TM-733, TM-833, TM-G707,
TM-V7A, (Delta) D-700, 480hx, and more kenwood late models.YAESU: FT-100, FT-817, FT-857, FT-897, FT-7100, FT-7800, FT-8100R, FT-840, FT-847 V-UHF,
FT-890, FT-900, FT-1500, FT-3000, FT-8500, & more Yaesu late modelsKANTRONIC KPC3 & KAM DB9 VHF port:
Order KVMDIN 19.97
MFJ, PacComm, and AEA TNCees with 5 pin DIN radio port: Order:
ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O, Data I/O, to MFJ and TNCees with 5 pin DIN I/O.
Icom transceivers with 8 pin screw-on mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port.
19.95 Model KVIC8MX Icom transceivers with 8 pin screw-on mic and 3.5mm external speaker jack, to MFJ, PacComm, & Some AEA TNCees.
Icom transceivers with 4 pin screw-on mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port.
Icom transceivers with 4 pin screw-on mic and 3.5mm external speaker jack, to MFJ, PacComm, and TNCees with 5 pin DIN I/O port
19.95 Model 5DIC4MX Icom, 706 MK II G to RASCAL GLX enables HF, VHF, UHF, PSK, SSTV, Packet, RTTY/FSK..etc Built-in SPDT switch enables switching between HF & VHF/UHF
27.97 Model
IC13HVURY![]()
Icom, transceivers with RJ 45, modular mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port
19.97 Model KV98IC45 Icom, (W32..etc), Yaesu, & Radio Shack HT's (not all) to KAM, KAM+, KAM98 Dsub 9 pin & KPC3 VHF port.
19.97 Model KV024 Kenwood transceivers with 8 pin screw-on mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port.
19.97 Model KVAK8MX Kenwood transceivers with 5 pin screw-on mic and 3.5mm external speaker jack, to Kantronics 9 pin Dsub VHF port.
19.97 Model KVKW5MX Kenwood transceivers with 5 pin screw-on mic and 3.5mm external speaker jack, to MFJ & PacComm 5 pin DIN Radio port.
19.97 Model 5DKW5MX Kenwood transceivers with 4 pin screw-on mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port.
19.97 Model KVKW4MX Kenwood transceivers with 4 pin screw-on mic and 3.5mm external speaker jack, to MFJ, PacComm, & Some AEA TNCees.
19.97 Model 5DKW4MX Kenwood, transceivers with RJ 45, modular mic and 3.5mm external speaker jack, to TNC with 5 pin DIN Radio port.
19.97 Model 5DK45 Kenwood, transceivers with RJ 45, modular mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port.
19.97 Model KV98KW45 KENWOOD TS-480 Sound Card Input - Output direct connect with 3.5mm plug I/O to 6 pin Mini DIN jack on TS 480
19.97 model MDIN480 Radio Shack, transceivers with RJ 45, modular mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port.
19.97 Model KV98RS45 TenTec transceivers with 4 pin screw-on mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port.
19.97 Model KVTT4MX TenTec transceivers with 4 pin screw-on mic and 3.5mm external speaker jack, to MFJ, PacComm, & Some AEA TNCees.
19.97 Model 5DTT4MX YAESU transceivers with 8 pin screw-on mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port.
19.97 Model KVY8MX YAESU transceivers with 8 pin screw-on mic and 3.5mm external speaker jack, to MFJ, PacComm, & Some AEA TNCees.
19.95 Model 5DY8MX YAESU transceivers with 4 pin screw-on mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port.
19.97 Model KVY4MX YAESU transceivers with 4 pin screw-on mic and 3.5mm external speaker jack, to MFJ, PacComm, and Some AEA TNCees.
19.97 Model 5DY4MX YAESU, transceivers with RJ 45, modular mic and 3.5mm external speaker jack, to Kantronic Dsub 9 pin VHF port.
19.97 Model KV98FT45 YAESU, FT-736, FT-600, FT-890, and Late Model FT-900 transceivers with 3.5mm HF Data I/O HF jack to MFJ, and TNCwith 5 pin DIN I/O
19.97 Model 5DFT600 YAESU, FT-1000Mk V, FT-990, and TenTec transceivers with 5 pin DIN Data I/O jacks to Kantronics KAM 98/XL Dsub9 HF port.
19.97 Model K98XL5D This is the cable used to interface TNCees with a female DB 25 comport to PCees with a 9 pin (male) serial Comport.
19.97 Model DB9FDB25M ![]()
Cables, Connectors, and switch-box sets shown on this page may be employed by the user at his or her risk. No liability is assumed by BUX COMM or its employees due to the use and/or misuse of these devices, products, cables, and/or switches. WE DO NOT MAKE SELECTIONS FOR YOU.
We Accept
![]()
![]()
Mail or FAX form CLICK HERE! AEA
![]()
Mail order form or FAX to 434 525 7818 CLICK HERE!
IMPORTANT NOTE; Prices of cable assemblies shown, do NOT include shipping & handling. All orders are shipped within 24 hours of receiving, via UPS, or Priority mail. Shipping & Handing added to each interface cable order: USA and CANADA=$7.90, Foreign=$11.90
Alinco, DR 605 transceiver with 2.5mm and 3.5mm 9K6 jacks, to MFJ 1270CQ 9600, AEA PK-96, and PacComm 9k6 TNCees
ALINCO DR-110 to PK-232 Radio port 1 or 2
ALINCO , Kenwood, & ADI 8 pin screw-on mic to AEA PK-232.
ALINCO , Kenwood, 4 pin screw-on mic to AEA PK-232. (TS-120) etc
ALINCO DJ100, DJ-120, DJ-200, & DJ-500 to PK-232 Radio port 1 or 2
ALINCO DJ100, DJ-120, DJ-200, & DJ-500 to PK-12, PK-96, PK-900 & PK-2232 w/5 pin DIN I/O jack.
ALINCO DR-135 to AEA PK-232 with 9600 baud MoDem, WIRED FOR 9600 bauds Operation!
ALINCO DR-135 to AEA PK-96, and AEA PK-900 WIRED FOR 9600 bauds Operation!
ALINCO DR-135 to AEA PK-96, and AEA PK-900 WIRED FOR 1200 bauds Operation!
ALINCO DJ-F1 and transceivers with similar I/O, to AEA PK-232
ALINCO ADI, and transceivers with similar Mic I/O AEA (PK900, PK96, PK 12) 5 pin DIN Note that receive audio must be available at pin 6 of the 8 pin mic jack.
ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O, to AEA PK-96 & 900
5D9KMDIN $19.97ICOM 8 pin screw-on MIC & 3.5mm Ext Spkr jack, to AEA PK-232
ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O, to AEA PK-96, PK-900, DSP-2232
ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O, to AEA PK-232
This cable and switch-box can switch to either of the bands of the IC 706 & IC 706 MKII G, HF, VHF, & UHF. Avaliable in three versions: A, B, & C
Model IC13HVU-C, for AEA PK 232 5 pin, single-inline Radio port(s) 1 & 2
ICOM 4 pin screw-on MIC & 3.5mm Ext Spkr jack, to AEA PK-232
ICOM 706 and Icoms with 13 pin DIN Data I/O to AEA PK232PK232-MBX
ICOM SPECIAL Dual I/O cable, AEA PK232 RADIO and FSK jacks to Icom 13 pin DIN ACCY w/FSK pin.
ICOM SPECIAL Dual I/O cable, AEA PK232 RADIO and FSK jacks to Icom 8 pin DIN ACCY w/FSK pin. IC 746, IC 756, and PRO, Pro II PRO III and radios with similar I/O.
ICOM 746 & 756 etc with 8 pin DIN ACC(1) & 7 pin ACC(2) accessory jack(s) to AEA PK232
For ICOM 746 "VHF" Operation, NOT for HF.ICOM 746, 756 and Pro, 8 pin DIN ACC-1 for HF PTT to AEA PK900, PK-96, PK-12 5 pin DIN
ICOM 8 pin DIN accessory jack (HF) to AEA PK232
ICOM 2100, 2200, IC 706, etc and Icom transceivers with RJ 45 Mic I/O to AEA PK232
ICOM 706 and Icom with 13 pin DIN Data I/O to SCS PTC IIe, MFJ, & AEA PK-900, PK-12, PK-96
ICOM RJ45 to AEA PK-232 (for Icom with Rx audio at RJ-45 pin 3).
ICOM transceivers with 8 pin accessory I/O to AEA 5 pin SIL connector.
ICOM transceivers with 8 pin DIN accessory jack to PK-900, PK-2232, PK-96 & PK-12
ICOM , 746 and similar radios with 8 pin DIN ACC(1) and 7 pin DIN ACC(2) AEA PK-96 & 900 For VHF operation of ICOM 746, 756 Pro, Pro II, and Pro III . Order 5D746-V 19.97
ICOM, HT's to PK12, PK96, PK900, DSP-232, MFJ, & PacComm Order 5D024 19.97
![]()
ICOM transceivers with RJ45 mic jack to AEA PK-96, PK-900, DSP-2232, MFJ1270, 1278, PacComm Tiny II MKII
ICOM transceivers with 8 pin mics with receive AF at pin 8 AEA 2232
ICOM RJ45 to TNCs with 5 pin DIN Radio Ports, MFJ, SCS, PacComm, & some AEA
ICOM (W32..etc), Yaesu, & Radio Shack HT's to AEA PK-232
JST245 to to AEA PK-900, PK96, PK12, MFJ-1270, A, B, C, & 1278, PacComm Tiny-II and TNCees with 5 pin DIN I/O.
KENWOOD transceivers with RJ45 Mic plug, and Rx audio at Mic jack, pin 7, TM271, TM471, TM732, TM741, TM742, TM941, TM942, TM641, to AEA PK 900, PK 2232, PK 96, PK 12 and TNCees with 5 pin DIN radio ports.
KENWOOD HandHeld transceivers with 3.5mm & 2.5mm TR-2500, 3500, & 7500 and handhelds with similar I/O's to AEA PK-900, PK96, PK12, MFJ and PacComm 5 pin DIN Radio ports. Order 5DTR2500 19.97
KENWOOD transceivers with RJ45 Mic plug, and Rx audio at Mic jack, pin 7, TM271, TM471, TM732, TM741, TM742, TM941, TM942, TM641, and similar radios, to AEA PK 232. Order A232K732 19.97
KENWOOD (late model) TS-450, 950, 2000, etc. w/13 pin DIN to AEA PK-900, PK96, PK12 NOT for early models #40s, 440, etc; If 440, 940 etc, specify
KENWOOD transceivers with RJ 45, modular mic and 3.5mm external speaker jack, to AEA PK-900, PK96, PK12, MFJ and PacComm 5 pin DIN Radio ports.
KENWOOD late model transceivers w/13 pin DIN, TS-450, 950, 2000, etc to AEA PK-232 NOT for early models #40s, 440, etc; If 440, 940 etc, specify
↑Other Kenwood Transceivers with 13 pin DIN accy jack. TS-140, TS-450, TS-570, TS-670, TS-680, TS-690, TS-711, TS-790, TS-811, TS-850, TS-870, TS-950, and Kenwood transceivers with 13 pin DIN accessory jacks.
KENWOOD SPECIAL Dual I/O cable, AEA PK232 RADIO and FSK jack KENWOOD 13 pin DIN w/FSK pin. NOT for early models #40s, 440, etc; If 440, 940 etc
KENWOOD SPECIAL Dual I/O cable, AEA PK900 RADIO and FSK jacks to KENWOOD 13 pin DIN with FSK pin.NOT for early models #40s, 440, etc; If 440, 940 etc,
KENWOOD early Kenwood TS 940, 440 etc 13 pin DIN ACC2 jack to AEA PK900, MFJ & PacComm
KENWOOD early model transceivers with 13 pin DIN accessory jack, TS-440, 940 etc. AEA PK-232
KENWOOD , Alinco, ADI, and SGS 2020 & 3.5mm Ext Spkr jack, to AEA PK-232
KENWOOD 4 pin mic IN and 3.5mm Ext Spkr to AEA PK-900, PK-12, PK-96, & MFJ
KENWOOD , Alinco, ADI, and SGS 2020 & Ext Spkr jack, to AEA PK-900, PK-12, PK-96
KENWOOD , RJ 45 MIC & 3.5mm Spkr to AEA PK-232.
KENWOOD , Alinco, ADI, SGS2020 and transceivers with similar I/O to AEA with 5 pin DIN I/O.
KENWOOD transceivers with 6 pin, screw-on mic jack to PK232
KDK 4 pin mic IN and 3.5mm Ext Spkr to AEA PK-900, PK-12, PK-96, & MFJ
Motorola RADIUS TNC2, AEA TNCees with 5 pin DIN radio port, MFJ 5 pin DIN Radio port, PacComm and TNCees with 5 pin DIN Radio port. Order 5DRADIUS 19.97
Radio Shack HT's (HTX-202, 404, etc.) to AEA PK-232
Radio Shack HTX252 to PK-232 Radio port 1 or 2
Radio Shack with (HTX 212 & 242) RJ45 Mic & 3.5mm Ext Spkr jack to AEA PK-232
Radio Shack with (HTX 212 & 242) RJ45 Mic & 3.5mm Ext Spkr jack to AEA PK-900, PK-12, PK-96,
Radio Shack HT's to PK12, PK96, PK900, DSP-232, MFJ, & PacComm
TenTEC transceivers with 5 pin DIN data I/O to AEA PK-232
TenTEC Pegasus & Jupiter to PK12, PK96, PK900, DSP-232
TenTEC ORION AUX I/O to AEA PK-232 and PK232MBX.
TenTEC ORION AUX I/O to AEA PK-900, PK-12, PK96 and TNC w/5 pin DIN port.
YAESU 8 pin screw-on mic to AEA PK-232
YAESU 4 pin screw-on mic to AEA PK-232
YAESU FT-736, FT600, FT-890 and YAESU transceivers with similar Data and PTT jacks to AEA PK232
YAESU FT-2400, 2500 etc with RJ45 Mic to AEA PK-900, PK-12, PK96 and TNC w/5 pin DIN port.
YAESU FT-2400, 2500 etc with RJ45 Mic to AEA PK-232, 5 pin inline jacks.
YAESU FT-757 & FT-767 RCA accessory jacks to AEA PK232/MBX
YAESU FT-50, FT-40, FT-10, VX-1, VX-5 and similar HandHelds to PK232
YAESU FT-50, FT-40, FT-10, VX-1, VX-5, VX-150 and similar HandHelds to PK12, PK96, PK900
YAESU , Icom, HT's to PK12, PK96, PK900, DSP-232, MFJ, & PacComm
YAESU FT-990, FT-1000, TenTecL Pegasus & Jupiter to PK12, PK96, PK900, DSP-232,
YAESU FT-847 "HF" Data I/O jack to AEA PK232, RAD port 1 or 2.
YAESU FT-847 "HF" Data I/O jack. (see also MFJ-1278) to PK12, PK96, PK900, DSP-232
YAESU transceivers with 5 pin DIN data I/O to AEA PK-232
YAESU FT-2600 Data I/O to AEA PK-232 RADio port 1 or 2
YAESU FT-2600 Data I/O to AEA PK-900, PK-12, PK-96
YAESU CPU2500 R mic IN and 3.5mm Ext Spkr, to AEA PK-900, PK-12, PK-96, & MFJ
YAESU transceivers with 8 pin mic & 3.5mm Ext Spkr jack to AEA PK-96, PK-900, DSP-2232
YAESU FT-600, FT-736, & FT-890 and similar Yaesu Data I/O AEA with 5 pin DIN ports.
YAESU transceivers with 8 pin screw-on microphone, to AEA PK-232
Order A232Y8MX 19.97
![]()
YAESU FT-757 and transceivers with similar I/O to AEA PK-96, PK-900, PK-2232
AEA PK-87 to Radio Shack transceivers with RJ45 Mic and receive AF at 3.5mm Ext Spkr jack
AEA PK-88 to ALINCO transceivers with receive AF at mic connector, pin 6
AEA PK-88 to Handhelds with 2.5mm MIC and PTT, receive is AF at 3.5mm Jack
AEA PK-88 to ALINCO transceivers with 8 pin MIC and receive AF at 3.5mm Ext Spkr Jack
AEA PK-88 to Icom transceivers with 13 pin DIN Accessory jack, wired for VHF/UHF operation.
AEA PK-88 to Icom transceivers with 13 pin DIN Accessory jack, wired for HF operation.
AEA PK-88 to Icom transceivers with RJ 45 Microphone jacks & 3.5mm Ext Spkr.
AEA PK-88 to Icom transceivers with receive AF at mic connector pin 8.
AEA PK-88 to KENWOOD 8 pin Mic w/Ext Spkr AF
AEA PK-88 to Vertex Standard (YAESU) VX-1, VX-5, VX-150, FT-50, FT-40, FT-10, and similar HandHelds
AEA PK-88 to Radio Shack RJ45 modular Mic & 3.5mm Ext Spkr Audio
AEA PK-88 to YAESU transceivers with 8 pin screw-on microphone.
AEA PK-88 to YAESU FT-2400 & FT-2500 transceivers with RJ 45 Microphone jacks.
AEA PK-88 to ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O,
AEA PK-88 to TenTec, YAESU, and transceivers with 5 pin DIN I/O
AEA PK232 port 1 & 2, to Index Laboratories QRP+ transceiver with 3.5mm microphone jack, and 3.5mm AF Out connector
Order A232NDXLAB 19.97
![]()
BACK to TOPThis is the cable used to interface TNCees with a female DB 25 comport to PCees with a 9 pin Dsub Comport. 19.97 Model DB9FDB25M
![]()
TNC/MIC Switches for transceivers that do not have an accessory jack. EZ switch'n between MIC and TNC without having to remove the microphone, Just Flip the switch. It's great when operating SSTV, and modes requiring both voice and digital interaction. The 5 pin DIN at "A" plugs into the TNC I/O jack, the Screw-On connector at "B" connects to the radio mic jack. The 3.5mm (1/8") plug at "D" plugs into the (Ext Spkr) "Y" connector (included), and the Radio Microphone connects to the MIC jack at "C".Overall length is nine (9') feet.
Alinco 8 pin Screw On MIC 29.95 ARS8
Icom 8 pin Screw On MIC 29.95 IRS8
Icom 8 pin RJ45 MIC 29.95 IRS45
Kenwood 8 pin Screw On MIC 29.95 KRS8
Kenwood 4 pin Screw On MIC 29.95 KRS4
Yaesu 8 pin Screw On MIC 29.95 YRS8
Yaesu 4 pin Screw On MIC 29.95 YRS4The 5 Pin DIN TNC /MICrophone switches shown above work with MFJ, PacComm, and some AEA Packet controllers with 5 pin DIN Radio jacks, and those TNCees with 5 pin DIN Radio ports. Special MIC-TNC switches are available for other TNCees and KPC/KAMs with different type connectors
We Accept
![]()
![]()
![]()
Mail or FAX form CLICK HERE!Cables, Connectors, and switch-box sets shown on this page may be employed by the user at his or her risk. No liability is assumed by BUX COMM or its employees due to the use and/or misuse of these devices, products, cables, and/or switches. WE DO NOT MAKE SELECTIONS FOR YOU.
KANTRONICS
KAM, KAM+, KAM98, KAMxl, KPC3, KPC3+, & KPC-9612 Mail order form or FAX CLICK HERE!IMPORTANT NOTE; Prices of cable assemblies shown, do NOT include shipping & handling. All orders are shipped within 24 hours of receiving, via
U S P S PRIORITY MAIL, or UPS. Shipping & Handing added to each interface cable order: USA and CANADA=$7.90, Foreign=$11.90Alinco, ADI, & Kenwood transceivers with 8 pin screw-on mic and 3.5mm external speaker jack, to Kantronic KAM and KAM +, 8 pin HF port. 19.97
ALINCO HT's toKAM & KPC3 VHF port.
ALINCO transceivers with 8 pin screw-on mic & 3.5mm Ext Spkr jack to KAM /KAM+ HF port.
ALINCO transceivers with 8 pin screw-on mic & 3.5mm Ext Spkr jack to KAM KPC3 VHF port.
ALINCO DX-70 HF transceiver and Kenwood with 8 pin mic jack, and 3.5mm Ext Spkr jack to KAM/KAM+ 8 pin DIN HF port.
ALINCO 8 pin microphone I/O except ALINCO DR-110 to Kantronic 1200 baud port.
ALINCO DR-110, Kenwood, ADI, with 8 pin screw-on mic and 3.5mm Ext Spkr jack.
ALINCO DJ100, DJ-120, DJ-200, & DJ-500 to KAM, KPC, & TinyTrak TNCees with DB9 I/O jacks
Alinco, DR 605 transceiver with 2.5mm and 3.5mm 9K6 jacks, to Kantronic KPC-9612 Dsub 15 pin 9600 b/s port.
ALINCO DR-135 to Kantronics KPC-9612 wired to the 9k6 baud port.
ALINCO DR-135 to Kantronics 1200 baud port.
Alinco, RJ45 Kantronic 1200 baud port.
Alinco, Kenwood, ADI, 8 pin screw-on mic to Kantronic 1200 baud port. ALSO interfaces KPC2
(late model) with DE9 Radio port to 8 pin ALINCO etc.AZDEN 8 pin Mic to Kantronics 1200 baud port.
This cable and switch-box can switch to either of the bands of the IC 706 & IC 706 MKII G, HF, VHF, & UHF. Avaliable in three versions: A, B, & C
Model IC13HVU-B, for KANTRONIC 9 pin Dsub Radio port.
ICOM transceivers with 8 pin DIN Data I/O jack (includes Pro II and Pro III series) to KAM or KPC 1200 baud (VHF) port.
ICOM Late Model 781, 746, 756, transceiver 8 pin DIN Data I/O (includes Pro II and Pro III series) jack with FSK/RTTY option/pin to KAM (8 pin DIN) HF port.
ICOM 13 pin DIN, accessory jack Interface for KAM or KPC 1200 b/s (VHF port)
NOTICE:This interface cable is for IC 706 Mk II G and IC 718 VHF / UHF operation.ICOM 13 pin DIN, accessory jack Interface for KAM, KPC, and TinyTRAK 1200 b/s (read carefully)
NOTICE:This interface cable is for IC 706 Mk II G and IC 718 HF operation.
JST Japanese Radio Corp to Kantronics Dsub 9 jack on KAM 98 & KAM xl, for HF use. Use with KAM, KPC, and other KPCees for VHF/1200 b/s.
Kenwood TR-2500 Hand-Held to Kantronics KPC3 and KAM VHF Radio port.
Kenwood TS-850 and similar Kenwoods with 13 pin DIN, acc2 jack and RCA (phono) FSK/RTTY jack.
Kenwood with 13 pin DIN, accessory jack to KAM or KPC 1200 b/s (VHF port) Dsub 9.
Kenwood with 13 pin DIN, accessory jack to KAM 8 pin DIN HF port .
Kenwood with 13 pin DIN, acc2 jack with FSK pin to KAM 8 pin DIN HF port .
Kenwood "EARLY MODELS" with 13 pin DIN, accessory jack to KAM 8 pin DIN HF port to KW 440/940 .
Kenwood with 13 pin DIN, accessory jack to KAM 8 pin DIN HF port .
↑Other Kenwood Transceivers with 13 pin DIN accy jack. TS-140, TS-450, TS-570, TS-670, TS-680, TS-690, TS-711, TS-790, TS-811, TS-850, TS-870, TS-950, and Kenwood transceivers with 13 pin DIN accessory jacks.
YAESU KAM & KAM + 8 pin DIN (HF) to YAESU FT900 with 3.5mm Stereo and RCA jack for Tx AF in, Rx AF out, and PTT. Works with other YAESU transceivers with similar (I/O)
YAESU KAM & KAM + 8 pin DIN (HF) to YAESU FT920 with RCA jacks for Tx AF in, Rx AF out, and PTT. Works with other YAESU transceivers with similar RCA jacks (I/O)
YAESU 4 pin DIN, FSK (RTTY) jack to RTTY/FSK I/O KAM 8 pin DIN HF port (RTTY ONLY)
YAESU, 8 pin screw-on mic to Kantronic 1200 baud port.
YAESU, FT-1000Mk V, 990, and TenTec transceivers with 5 pin DIN Data I/O jacks to Kantronics KAM 98/XL Dsub9 HF port.
ICOM, Yaesu, & Radio Shack HT's (not all) to KAM & KPC3 VHF port. Insure that your radio is compatible with this cable. NOTE: PTT strapping option inside the KPC must be set for HT PTT.
ICOMtransceivers with 8 pin screw-on mic & 3.5mm Ext Spkr jack to KAM /KAM+ HF port.
ICOMtransceivers with 8 pin screw-on mic & 3.5mm Ext Spkr jack, to KAM /KAM+, KPC3 VHF port.
ICOMtransceivers with 8 pin mic jack with Rx AF at pin 8 to Kantronics 1200 baud port.
ICOM706 transceiver with 13 pin accessory jack to Kantronics KAM 98, DE9 port.
Note; PTT line is set for HF operation of the Icom 706 (pin 3).ICOM706 transceiver with 13 pin accessory jack to Kantronics 1200 baud port.
Note; PTT line is set for VHF operation of the Icom 706 (pin 7).ICOM, 8 pin screw-on mic to Kantronic 1200 baud port.
ICOM 8 pin DIN ACCY jack to Kantronics KAM, KAM+, KPC3, & KPC-9612 1200 baud port.
ICOM 8 pin DIN accessory jack to KAM & KAM plus 8 pin DIN HF port.
ICOM 13 pin DIN accessory jack to KAM & KAM Plus HF port.
ICOM 8 pin DIN ACC-1 (HF use). NOT for VHF ! KAM HF port to
ICOM RJ45 (IC2100, 2200, 706, 8000) with receive AF at 3.5mm Ext Spkr, to Kantronic VHF Radio port.
ICOM (W32..etc), Yaesu, & Radio Shack HT's (not all) to KAM & KPC3 VHF port.
ICOM 746 and similar radios with 8 pin DIN ACC(1) and 7 pin DIN ACC(2) to Kantronic VHF jack.
ICOM 13 pin DIN accessory jack to KAM Plus & KAM vhf port (VHF)
ICOM 706, 718, and 2000 RJ45 MIC jack with Receive audio at pin 3, to Kantronic 1200 b/s port.
ICOM transceivers with 13 pin DIN Data I/O jacks to KAM xL and KAM 98 DB9 Radio Port(s) This interface covers the main features and modes of the KAM XL and the Icom 706 mkII and IC 718. AFSK, Packet, Gtor, RTTY/FSK, CW and more!
ICOM transceivers with 8 pin DIN Data I/O jacks to KAM xL and KAM 98 DB9 Radio Port(s) This interface covers the main features and modes of the KAM XL and ICOM transceivers with 8 pin DIN accessory jack. AFSK, Packet, Gtor, RTTY/FSK, CW and more!
KENWOOD transceivers with 13 pin DIN Data I/O jacks to KAM and KAM PLUS, 8 pin DIN HF Radio Port.
This cable includes RTTY to/from the KAM + to (FSK) pin 2 of late model Kenwoods with 13 pin DIN accessory jack.KENWOOD transceivers with RJ45 Mic plug, and Rx audio at Mic jack, pin 7, TM271, TM471, TM732, TM741, TM742, TM941, TM942, TM641, to Kantronics KPC-3, KAM+, KAM 98, and KPCees with similar radio ports.
KENWOOD transceivers with 13 pin DIN Data I/O jacks to KAM xL and KAM 98 DB9 Radio Port(s) This interface covers the main features and modes of the KAM XL and the Kenwood 13 pin DIN accessory jack. AFSK, Packet, Gtor, RTTY/FSK, CW and more!
LATE Model Transceivers with 6 pin "Mini" DIN Data I/O jack to KAM xL and KAM 98 DB9 Radio Port(s) AFSK, Packet, and more!
LATE Model Transceivers with 5 pin "standard" DIN Data I/O jacks to KAM xL and KAM 98 DB9 Radio Port(s) AFSK, Packet, and more!
TenTec Orion and Transceivers with 8 pin "standard" DIN Data I/O jacks to KAM xL and KAM 98 DB9 Radio Port(s) AFSK, Packet, and more!
Our most popular interface cable connects the KAM VHF, KPC 1200 baud, and the KPC3, KAM VHF, & TinyTRAK, to ALINCO, AZDEN, Icom IC-2720 706, 718 etc, KENWOOD, and YAESU, and some Icom transceivers with 6 pin Mini DIN ISO 9002 Data I/O,.
AZDEN: PCS 9000
ICOM: IC-2720H, IC-2725E, 706 MK II, IC 718, IC-207H, and more Icom late models.
KENWOOD: TM-255, TM-455, TM-G707, TM-D700x, TM-V7, TS-480, TM-733, TM-833, TM-G707,
TM-V7A, (Delta) D-700, 480hx, and more kenwood late models.YAESU: FT-100, FT-817, FT-857, FT-897, FT-7100, FT-7800, FT-8100R, FT-840, FT-847 V-UHF,
FT-890, FT-900, FT-1500, FT-3000, FT-8500, & more Yaesu late modelsYAESU FT-8800, 6 pin mini DIN data jack to Kantronics KPC-3. See special menu setup for 1200 bps
KDK 4 pin mic jack to Kantronics KPC-3
KENWOOD transceivers with RJ45 Mic plug, and Rx audio at Mic jack, pin 7, TM271, TM471, TM732, TM741, TM742, TM941, TM942, TM641, to Kantronics KPC-3, KAM+, KAM 98, and KPCees with similar radio ports.
KENWOOD RJ45 microphone jack to Kantronic 1200 baud port
KENWOOD 13 pin DIN to KAM, KAM+, HF (8 pin DIN) port. NOT for early 440 & 940, See KHKW4013
KENWOOD Early Model (440 and 940) with 13 pin DIN accessory jack. 13 pin DIN uses pin 13 as PTT and pin 9 as MIC Mute to KAM, KAM+, (8 pin DIN) HF port.
Order KHKW4013 19.97KENWOOD TS-2000 13 pin DIN, NOTE ! that "receive audio" is extracted from SUB receiver pin 1, to KAM, KAM+, & KPC3 VHF port. Order KVKW13SR 19.97
KENWOOD 6 pin screw-on mic jack to KANTRONICS KAM, KAM+, KPC-9612, & KPC3, 1200 baud port
KENWOOD 13 pin DIN ACC2, with FSK option added to KAM & KAM+ 8 pin DIN HF port.
Order KH8DKW13, 19.97
![]()
NOT for early models #40s, 440, etc; If 440, 940 etc, specifyKENWOOD HT's. (Except 2500) to KAM & KPC3 VHF port.
ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O,
ICOM: IC-2720H, IC-2725E, 706 MK II, IC 718, IC-207H, and more Icom late models.
KENWOOD: TM-255, TM-455, TM-G707, TM-D700x, TM-V7, TS-480, TM-733, TM-833, TM-G707,
TM-V7A, (Delta) D-700, 480hx, and more kenwood late models.YAESU: FT-100, FT-817, FT-857, FT-897, FT-7100, FT-7800, FT-8100R, FT-840, FT-847 V-UHF,
FT-890, FT-900, FT-1500, FT-3000, FT-8500, & more Yaesu late models
Kenwood, Yaesu, Icom, & Radios with 6 pin Mini DIN data jacks to KPC-9612, 9600 port
MFJ DataRadio 5 pin DIN Jack to KPC9612, 9600 b/s port,
MIDLAND 4 pin microphone I/O to Kantronic KPC-3 & KAM vhf port.
Radio Shack HTX 252 Mic & 3.5mm Ext Spkr jack to Kantronics 1200 baud port.
Radio Shack HTX 212, & 242 w/ RJ45 Mic & 3.5mm Ext Spkr jack to Kantronics 1200 baud port.
Standard and ALINCO HT's toKAM & KPC3 VHF port.
TenTec ORION "AUX I/O" to KAM/KAM+ 8 pin DIN HF port.
TenTec ORION "AUX I/O" to KAM/KAM+ DB9 VHF port .
TenTec transceivers with 5 pin DIN data I/O to KAM xL DE9 HF port with CW key plug.
TenTec transceivers with 5 pin DIN data I/O to KAM xL DE9 HF port.
TenTec transceivers with 5 pin DIN data I/O to KAM/KAM+ 8 pin DIN HF port.
TenTec OMNI, YAESU FT-757 & 767 Patch Jacks to Kantronics KAM 8 pin DIN HF port.
YAESU FT-2400, 2500 etc with RJ45 Mic to Kantronics VHF & 1200 baud (DE9) port.
YAESU FT-2600 to Kantronics 1200 baud port (DB9 KPC/KPC3/KAM etc).
YAESU FT-847 HF Packet DATA jack to KAM98 and KAMxL Dsub 9 pin DE9 HF.
For FT-847 VHF Packet operation, see KVMDIN.
YAESU FT-847 HF Packet DATA jack to KAM and KAM+ 8 pin DIN HF port.
For FT-847 VHF Packet operation, see KVMDIN.
Yaesu 8 pin mic jack to KAM HF port, receive audio is from 3.5mm Ext Spkr jack.
YAESU transceivers with 8 pin screw-on mic jacks and 3.5mm Ext Spkr jack to KAM VHF port.
YAESU FT-757 & FT-767 RCA accessory jacks to Kantronic VHF (DE9).
YAESU FT-736, FT600, FT-890 and YAESU transceivers with similar Data and PTT jacks to Kantronics KPC3 and KAM VHF (1200 baud) port .
Order KVFT736 19.97YAESU FT-1000D & FT-1000MP +(990) 5 pin DIN to Kantronics KAM/+ 8 pin DIN HF port.
YAESU FT-50, FT-40, FT-10, VX-1, VX-5 and similar HandHelds to KAM & KPC3 VHF port.
ISO standard 6 pin mini DIN data jackto KAM/KAM + 8 pin DIN HF port.
YAESU FT-757 GTX-II to Kantronics KAM 8 pin DIN HF port.
YAESU FT900, FT1000, MFJ 8621, TenTec Pegasus, & Jupiter 5 pin DIN data jack to KAM & KAM+ VHF port.
Index Laboratories QRP+ transceiver with 3.5mm microphone jack, and 3.5mm AF Out connector, to Kantronics VHF port.
This is the cable used to interface TNCees with a female DB 25 comport to PCees with a 9 pin Dsub Comport. 19.97 Model DB9FDB25M
![]()
Cables, Connectors, and switch-box sets shown on this page may be employed by the user at his or her risk. No liability is assumed by BUX COMM or its employees due to the use and/or misuse of these devices, products, cables, and/or switches. WE DO NOT MAKE SELECTIONS FOR YOU.
We Accept
![]()
![]()
![]()
TNC/MIC Switches for transceivers that do not have an accessory jack. EZ switch'n between MIC and TNC without having to remove the microphone, Just Flip the switch. It's great when operating SSTV, and modes requiring both voice and digital interaction. The 5 pin DIN at "A" plugs into the TNC I/O jack, the Screw-On connector at "B" connects to the radio mic jack. The 3.5mm (1/8") plug at "D" plugs into the (Ext Spkr) "Y" connector (included), and the Radio Microphone connects to the MIC jack at "C".Overall length is nine (9') feet.
Alinco 8 pin Screw On MIC 29.95 ARS8
Icom 8 pin Screw On MIC 29.95 IRS8
Icom 8 pin RJ45 MIC 29.95 IRS45
Kenwood 8 pin Screw On MIC 29.95 KRS8
Kenwood 4 pin Screw On MIC 29.95 KRS4
Yaesu 8 pin Screw On MIC 29.95 YRS8
Yaesu 4 pin Screw On MIC 29.95 YRS4MFJ 1270/1270CQ Turbo/1278/78B PacComm Tiny II /MK II SCS PTC IIe
IMPORTANT NOTE; Prices of cable assemblies shown, do NOT include shipping & handling. All orders are shipped within 24 hours of receiving, orderUPS, or Priority mail. Shipping & Handing added to each interface cable order: USA and CANADA Air Mail=$7.90, Foreign=$11.90
Motorola RADIUS TNC2, AEA TNCees with 5 pin DIN radio port, MFJ 5 pin DIN Radio port, PacComm and TNCees with 5 pin DIN Radio port. Order 5DRADIUS 19.97
ALINCO , DR 605 transceiver with 2.5mm and 3.5mm 9K6 jacks, to MFJ 1270CQ 9600, AEA PK-96, and PacComm 9k6 TNCees
ALINCO , Kenwood, & ADI, 8 pin screw-on mic to MFJ/PacComm/SCS, 5 pin DIN port
ALINCO and Standard Ltd. HTees to MFJ, & PacComm
ALINCO DR-110 to MFJ or PacComm TNC with 5 pin DIN
ALINCO DJ100, DJ-120, DJ-200, & DJ-500 to MFJ, PacComm, and TNCees w/5 pin DIN I/O jack.
ALINCO DR-135 to MFJ-1270B, & C, 1200 baud TNC
ALINCO with RJ45 Mic I/O to MFJ-1270/1278, and PacComm TNC.
ALINCO ADI, ALINCO, SG 2020, 8 pin mic to MFJ TNCees Note that receive audio must be available at pin 6 of the mic jack.
AZDEN 4000 and similar AZDEN 8 pin mic jacks
Icom, 8 pin screw-on mic & 3.5mm Ext Spkr jack, to MFJ/PacComm/SCS, 5 pin DIN port
This cable and switch-box can switch to either of the bands of the IC 706 & IC 706 MKII G, HF, VHF, & UHF. Avaliable in three versions: A, B, & C
Model IC13HVU-A, is for the IC 706 MkII to MFJ, PacCOMM, AEA PK-900, PK-96, PK-12, and TNCees with 5 pin DIN I/O
Icom 746, 756, 8 pin DIN ACC-1 for HF PTT (includes Pro II and Pro III series) to MFJ & PacComm TNCees with 5 pin DIN 5 pin DIN. ORDER 5DIC8DH 19.97
Icom 746 and similar radios with 8 pin DIN ACC(1) and 7 pin DIN ACC(2) to MFJ 5 pin DIN. For VHF operation of ICOM 746, 756 Pro II, Pro III , etc. ORDER D746V 19.97
Icom transceivers with RJ45 mic jack to AEA PK-96, PK-900, DSP-2232, MFJ1270, 1278, PacComm Tiny II MKII
Icom 207 to MFJ, & PacComm
Icom 706 and Icom with 13 pin DIN Data I/O to SCS PTC IIe, MFJ, & AEA PK-900, PK-12, PK-96
Icom 8 pin screw-on microphone jacks, and 3.5mm (1/8") Ext Spkr jack
INDEXLaboratories QRP+ transceiver with 3.5mm microphone jack, and 3.5mm AF Out connector
JST245 to to AEA PK-900, PK96, PK12, MFJ-1270, A, B, C, & 1278, PacComm Tiny-II and TNCees with 5 pin DIN I/O.
MFJ TNC to transceivers to; ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O,
KENWOOD transceivers with RJ45 Mic plug, and Rx audio at Mic jack, pin 7, TM271, TM471, TM732, TM741, TM742, TM941, TM942, TM641, to MFJ, PacComm, SGC and TNCees with 5 pin DIN radio ports.
Kenwood, transceivers with RJ 45, modular mic and 3.5mm external speaker jack, to AEA PK-900, PK96, PK12, MFJ and PacComm 5 pin DIN Radio ports.
KENWOOD transceivers with 6 pin screw-on microphone to 5 pin DIN TNC.
MFJ TNC ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O, ORDER 5DMDIN 19.95
KENWOOD TS-450, 950, 2000, etc. 13 pin DIN on late models to MFJ 1270/1278, AEA PK-900, PK96, & PK12 NOT for early models #40s, 440, etc; If 440, 940 etc, specify
↑Other Kenwood Transceivers with 13 pin DIN accy jack. TS-140, TS-450, TS-570, TS-670, TS-680, TS-690, TS-711, TS-790, TS-811, TS-850, TS-870, TS-950, and Kenwood transceivers with 13 pin DIN accessory jacks.
KENWOOD early TS 940, 440 etc 13 pin DIN jack to MFJ, AEA PK12, PK96, PK900, & PacComm.
KENWOOD , Alinco, ADI, and SGS 2020 to MFJ, 5 pin DIN
KENWOOD 4 pin mic IN and 3.5mm Ext Spkr to MFJ, AEA PK-900, PK-12, PK-96
KENWOOD (Most, including TR-2600) HT, (except 2500.) & RadioShack to MFJ, & PacComm
MIDLAND transceivers with 4 pin mic I/O and 3.5mm Ext Spkr jack.
Radio Shack 212, & 242 w/RJ45 Mic to MFJ, PacComm, PK900, PK 12, PK-96 & TNC w/5 pin DIN port.
TenTec ORION AUX I/O to MFJ 1278, 1270, 1274, 1276 and TNCees w/5 pin DIN port.
YAESU, 8 pin screw-on mic & 3.5mm Ext Spkr jack to MFJ/PacComm/SCS, 5 pin DIN port
YAESUFT-2400, 2500 etc with RJ45 Mic to MFJ/PacComm/SCS and TNC w/5 pin DIN port
YAESUFT-757 & FT-767 RCA accessory jacks to 5 pin DIN TNC.
YAESU transceivers with 8 pin screw-on mic and 3.5mm Ext Spkr jack.
YAESU FT-990, FT-1000, TenTec Pegasus & Jupiter to PK12, PK96, PK900, DSP-232, MFJ
YAESU FT-847 "HF" Data I/O jack to MFJ-1278, and similar 5 pin DIN TNC
YAESU FT-600, FT-736, FT-890, & FT900 and similar Data I/O MFJ & PacComm 5 pin DIN ports.
YAESU FT-50, FT-40, FT-10, VX-1, VX-5 and similar HandHelds to TNC with 5 pin DIN port.
YAESU transceivers with 8 pin mic & 3.5mm Ext Spkr jack to MFJ-1270, 1278, & PacComm.
YAESU, & Radio Shack HT's to TNC2 & TNC with 5 pin DIN port to most Icom (W32..etc)
YAESU CPU2500 R mic IN and 3.5mm Ext Spkr to MFJ, AEA PK-900, PK-12, PK-96.
YAESU 2500R to MFJ, & PacComm Tiny II and AEA PK96 & PK12
YAESU , Icom, & Radio Shack HT's to PK12, PK96, PK900, DSP-232, MFJ, & PacComm.
REGENCY HR-2 (A&B) to MFJ, PacComm, TNC2, AEA PK-900, PK-12, and PK-96
TinyTRAK with external (DC) power connection.
CONFIRM that your TinyTrak uses pin 7 for power input.
ADI, ALINCO, and Kenwoods with 8 pin screw on microphone to TinyTrak tinks with fused, DC power interface
Alinco, Icom, Kenwood, and Yaesu transceivers with 6 pin Mini DIN I/O to TinyTrak tinks with fused, DC power.
ALINCO DJ100, DJ 120, DJ 200, & DJ 500 Radio Shack HTX 202, 404, Icom, (W32..etc), Yaesu, Radio Shack (not all, Kenwood), to TinyTrak tinks with fused, DC power to DB9 I/O and interface. * Verify that your transceiver has compatible IO.
KENWOOD TH-K2 to TinyTrak 3. DC external power input.
KENWOOD TR 7400 and Kenwoods with 4 pin Mic and Rx AF OUT at Ext Spkr jack. DC external power input.
KENWOOD TM 261, TM271, TM471, and Kenwoods with RJ45 Mic with Tx AF IN, and Rx AF OUT at RJ45 Mic jack. DC external power input.
KENWOOD TR-2500 Hand-Held to TinyTRAK with external power input.
YAESU & Vertex Standard VX-1, VX-5, VX-150, FT-50, FT-40, FT-10, and similar HandHelds
PLEASE NOTE: If your VX series HandHeld has an internal threaded jack, (VX7) the TTRAKVXDC will not work!ICOM Transceivers with RJ45 Mic IN, and 3.5mm Ext Spkr Out. External DC input at Dsub radio port.
ICOM 8 pin screw-on Mic to TinyTRAK with external power input.
Icom transceivers with RJ45 MIC I/O to TinyTrak three with fused, DC power.
Radio Shack HTX 252 transceivers, TinyTrak tinks with fused, DC power.
YAESU 8 pin screw-on Mic to TinyTRAK with external power input.
SPECIAL BUILD, INTERFACE CABLES
Special built cables are built and shipped, same day, if order is received by 2:00 PM ESTHAL DXP-38 to KENWOOD TS-2000 interface cable, Click "ADD TO CART" to view drawing.
This is the cable used to interface TNCees with a female DB 25 comport to PCees with a 9 pin Dsub Comport. 19.97 Model DB9FDB25M
![]()
Cables, Connectors, and switch-box sets shown on this page may be employed by the user at his or her risk. No liability is assumed by BUX COMM or its employees due to the use and/or misuse of these devices, products, cables, and/or switches. WE DO NOT MAKE SELECTIONS FOR YOU.This ISOL8R they forgot to include will provide the isolation and help prevent HUM, .
Sound Card isolators to protect your audio from Noise and HUM.
9.97 CAT# ISOL8RThis cable interfaces the AEA DSP-2232 Radio Port 1 (standard DIN 5 pin male plug end) with the two 6 pin Mini DIN data ports on the Icom IC-910H (Main & Sub-Band data ports) - the two 6 pin Mini DIN male plug ends. This enables RX data on radio downlink "M" port and TX on uplink "S" port for satellite operations.
This cable interfaces the IC207 and IC 208 for remote mic to 6 pin Mini DIN male plug end to the 6 pin Mini DIN data ports on the Icom IC-207/208 This enables Tx & Rx with a headset with 2.5 mm and 3.5mm plug.
USB to SERIAL Adapter
OK, so you have a new PC with only a USB port, and no serial port.... Not so, any more. BUX Comm has the answer. This USB to Serial comport converter meets the specs shown below, and enables you to operate the RASCAL� interface(s) from a PC USB port. Also enables the use of TNC I/O and other serial comport devices.
Installation driver CD (included) installs serial port instantly
Supports baud rates from 1,200 to 115,200 K
Great addition for the new LapTop that came without a serial comport.
Drives the BUX Comm RASCAL"� for Auto-PTT in PSK31. etc.
USB2SC
23.97eaReg
59.95BUXCOMM Amateur Net: $
NOTE: A CD ROM containing the drivers for the USB2SC is inside the back panel of the USB converter package. All drivers are also available from the SUPPORT OEM CLICK HERE:This cable interfaces the AEA DSP-2232 Radio Port 1 (standard DIN 5 pin male plug end) with the two 6 pin Mini DIN data ports on the Icom IC-910H (Main & Sub-Band data ports) - the two 6 pin Mini DIN male plug ends. This enables RX data on radio downlink "M" port and TX on uplink "S" port for satellite operations.
This cable interfaces the IC207 and IC 208 for remote mic to 6 pin Mini DIN male plug end to the 6 pin Mini DIN data ports on the Icom IC-207/208 This enables Tx & Rx with a headset with 2.5 mm and 3.5mm plug.
13 pin DIN male plug wired with 6 ft (straight) cable. All 13 pins are connected, wires are color coded,
and include one drain/shield wire. For use with KENWOOD, ICOM, and radios with 13 pin DIN jacks.7.95 each ADD to CART
23.95 each ORDER No. USB2SC
Hard-To-Find Plugs and Jacks for HAM Radio and TeleCommunications.
STRAIGHT 4 circuit,
2.5mm Plug & Cable
Order Model. 4C25MMS4 CONDUCTOR, 2.5mm PLUG with cable. 4 circuit, 2.5mm plug. Tip, Ring 1, Ring2, sleeve. Plastic housing with strain relief. This connector is popular with many portables and hand-held transceivers. Introduced by YAESU on their hand-held transceivers. Also used with A\V electronic products. Sony & Canon camcorders. Panasonic, Pioneer portable DVD players and many others.
Right Angle 4 circuit,
2.5mm Plug & Cable
Order Model. 4C25MML4 CONDUCTOR, 2.5mm PLUG with cable. 4 circuit, 2.5mm plug. Tip, Ring 1, Ring2, sleeve. Plastic housing with strain relief. This connector is popular with many portables and hand-held transceivers. Introduced by YAESU on their hand-held transceivers. Also used with A\V electronic products. Sony & Canon camcorders. Panasonic, Pioneer portable DVD players Hand-Held transceivers, cellular devices, and many others.
4 circuit, 3.5mm Plug and Coiled Cable
For YAESU VX-1, VX-5, FT-10, FT-40, & FT-50, etc...
Tip = 1
Ring 1 = 2
Ring 2 = 3
Sleeve = 4
Order Model. VX4 $4.95![]()
4 CONDUCTOR, 3.5mm PLUG with cable. 4 circuit, 3.5mm plug. Tip, Ring 1, Ring2, sleeve. Plastic housing with strain relief. This connector is popular with many portables and hand-held transceivers. Introduced by YAESU on their hand-held transceivers. Also used with A\V electronic products. Sony & Canon camcorders. Panasonic, Pioneer portable DVD players and many others.
The solution for TNC to H-T interfacing for mobile and portable APRS operation. Of course, it makes a heavy-duty replacement cable for the Speaker-Mic. Standard Mic/Earphone 2.5mm & 3.5mm molded plug spacing. Easily extends more than six feet.
Small tip = RED,
Small Sleeve=Shield/Black
Large Tip = Yellow,
Large Sleeve = WhiteOrder No. 34558 $4.95
![]()
USB Cable, Male Type A to Male Type B, 6 feet long, 6 foot, USB CABLE standard A-B USB interface cable for printers, and other USB to PC applications.Shielded with internal "drain wire."
1.99 USB6F ↓
4 Conductor "INLINE" PLUG, mate for 4 circuit jack.
4 Conductor "INLINE" JACK, mate for 4 circuit plug.
DUAL (3.5mm) 1/8" PHONE STEREO JACKS TO (3.5mm) 1/8" PHONE STEREO PLUG ADAPTER
Great for splitting Sound Card Input and Output feeding RASCAL and speakers..etc.
Stereo 2X IN & 1 Stereo OUT
Works with Mono too.
1/8" BLACK PLASTIC STEREO (inline) PHONE JACK
3.5mm BLACK PLASTIC Mono 3.5mm Inline "mono" PHONE JACK
3/32" BLACK PLASTIC STEREO 2.5mm Inline PHONE JACK
3/32" BLACK PLASTIC MONO 2.5mm Inline PHONE JACK
1/8" STEREO PLUG WITH STRAIN RELIEF, GOLD-PLATED
Order 3.5mm No CA006
GOLD-PLATED RCA PANEL-MOUNT JACK - BLACK Order : CA056B
Specifications
color: black
chassis mount
hole: � 0.24"
panel thickness: max. 0.19"
GOLD-PLATED RCA PANEL-MOUNT JACK - RED Order CA056R
Specifications
color: red
chassis mount
hole: � 0.24"
panel thickness: max. 0.19"
1 X 4P NICKEL-PLATED RCA JACKS
Order Code: CA066
Specifications
material: nickel plated
dimensions: 3.0" x 1.0"
BLACK CABLE TIES - 100pcs
.99 Pk of 100
Colour: BLACK (UV Resistant)
Dimensions (A x B): 98 x 2.5mm
Quantity: 100pcs
Material: polyamide (nylon 6.6) as specified in MIL-S-23190 self-extinguishing
temperature: -40�F to 230�F
Tensile strength = 18 pounds
A = 4 inches
![]()
These are the better, UV Resistant
cable ties, that don't break apart at the first sign of cold weather.Male, 6 pin mini DIN with cable attached. Used with most transceivers having the ISO "standard" data input/output jacks. All wires are color coded for easy signal routing. $1.99 each Order 6MDN ↓
4.95 ea. Order 6MDN
Standard 4 pin DIN Plug Used as RTTY and CAT accessory plug I/O on some transceivers for RTTY interfacing (I/O). .99 ea Order # 4PDM
5 ft cable, wired to 4 pin DIN male connector. Pin 4 is bare/shield/ground.
1=White
2=Blue
3=Red
4=BARE/Shield Order 4D @ $4.99Standard 5 pin DIN Plug Used as accessory port I/O on some transceivers for PSK31 and SSTV sound card interfacing (I/O). Also a very popular TNC interface connector to PacComm, MFJ, and AEA TNC, radio ports. $ .99 ea # 5PDM
Standard 5 pin DIN female inline Used as accessory port I/O on some transceivers for PSK31 and SSTV sound card interfacing (I/O).
$ 1.99 ea # 5PDFIL
5 pin DIN cable pre-wired with all 5 pins connected, with shield and drain wire. This cable is used to interface RASCAL GLX to PC sound card & Radio. Also mates the 5 pin I/O jack on most TNCees. 6 feet, All wires are color coded.With 5 ft shielded cable, wired to 5 pin DIN male connector. Order 5D @ $1.99
5 pin DIN Chassi Mount Female
5DCMF, Female 5 pin DIN jack may be panel mounted, or combined with another similar connector to form an in-line adapter cable. 5DPCF is same except is for PC board mount. .79 ea Order 5DCMF
5 pin DIN Printed Circuit board mount. 5DCMF, Female 5 pin DIN jack may be panel mounted, or combined with another similar connector to form an in-line adapter cable. 5DPCF is same except is for PC board mount. .97 ea Order 5DPCF
6 PIN, 240� DIN JACK - BLACK
Order CA085
Specifications
boot color: black, 5 pins over 240� + 1 centering pin, boot in molded plastic, solder connectionsMATES with CA083 below.
6 PIN, 240� DIN PLUG - BLACK
Specifications
boot color: black, 5 pins over 240� + 1 centering pin, boot in molded plastic, solder connectionsMATES with CA085 above.
This six ft cable uses the same 240�, 6 pin DIN connector as CA083. The DIN PLUG is wired with all 6 pins connected. Ready to attach to your linear, or other connectors at opposite end.
6P, 240� DIN PANEL-MOUNT JACK - BLACK Order CA087
Specifications:
type: panel mount
5 pins over 240� + 1 centre pin
solder connectionsStandard 7 pin DIN Plug used as CAT interface plug on some transceivers for Computer Aided Tuning (CAT) (I/O). $1.25 each Order 7PDM
shielded cable, wired to 7 pin DIN male connector. Order 7D @ $4.95
Standard 8 pin DIN Plug Used as accessory plug to interface data input and output to many ICOM transceivers. e.g. PSK31 I/O, and KAM HF port. $1.49 ea Order 8PDM
Standard 8 pin DIN InLine jack Used as Inline jack to mate 8 pin DIN male, shown above.
$1.99 ea Order 8DFIL
Standard 8 pin DIN Plug with 6 ft cable, wired for ICOM 8 pin accessory jack, All 8 pins have wires, and color coded.
ORDER 8D @ $5.95Standard 13 pin DIN Plug MALE
Used as accessory plug to interface data input and output to many Kenwood & Icom transceivers. e.g. PSK31 I/O $1.99 ea. Order 13DMP
Standard 13 pin DIN Inline FEMALE Jack Mates 13 pin DIN male. Used as accessory jack to interface data input and output to many Kenwood & ICOM etc.. transceivers. $2.99 ea Order 13PDFIL
13 pin DIN MALE plug and 6 ft cable.
All 13 pins are connected, wires are color coded, and include one drain/shield wire.
Use with KENWOOD, ICOM, & radios with 13 pin DIN jacks.
13D13 pin DIN male plug wired with 6 ft (straight) cable. All 13 pins are connected, wires are color coded, and include one drain/shield wire. For use with KENWOOD, ICOM, and radios with 13 pin DIN jacks.
13D
$7.95
That AEA PK232 plug that is so hard to find....
BUX COMM has them in stock! Plug for the AEA PK-232 TNC. Order 232F5, 2 for 99 cents
YES, we also have the male counterpart (jack) to the above "female" plug. Make an extension, or buy both parts (see insert), and mate for other connector applications. 2 for 99 cents, Order 232M5
Metal Shielded RJ45 jack or CAT 5 jack, with pins for printed circuit board mounting. We use these to make RJ45 extensions for ICOM and other transceiver microphones. Great for switchbox I/O for MIC/PSK31 interface. 2 for 99� RJ45PCBJ
RJ45 Plug 4/$1.00 Order RJ45P
![]()
Used in PSK31 transceiver to sound-card interface, this shielded, twin cable has two, 3.5mm stereo connectors on one end. When using with PSK31, SSTV, RTTY, and Packet Sound card interfaces, only the "tip" of each connector is used; The "ring" is not used. NOTE that a large ferrite core is molded into each line near the sound card end of the cable. This is another means of preventing noise and RF feedback. Twin cable is four feet long. .99 � each SCABLE
Sound card six ft male to female stereo extender cables (1/8") or 3.5mm stereo male, to 3.5mm stereo female, shielded extension cable. These are 6 ft, high-quality, stereo cables. Great for sound card stereo extensions to RASCAL Line IN and Line OUT or MIC IN/SPKR OUT jacks. 35MFSTX2
$2.99 /set of 2.
RASCAL EXTENDER KIT Combined with the 6 ft RASCAL to transceiver cables, and 6 ft, RASCAL GLX to PC cables, this kit adds another 6 feet, allowing you to separate your transceiver and PC more than 15 feet apart. This kit contains:
One (1) db9 female, to db9 male cable 6 feet, serial comport cable, & Two (2) 3.5mm stereo female to male, 6 feet, sound card cables. 3.95 Order Model RXK
8 pin DIN male plug wired with 6 ft cable. All 8 pins are connected, wires are color coded, and include one drain/shield wire. For use with ICOM, and radios with 8 pin DIN accessory jacks. May also be used to interface KAM and KAM PLUS HF ports to various transceivers. $5.95 ea. ORDER No. 8D
Make your own CBL, using this ready made cable. The 5DMX cable is 6 feet long, the 5 pin (male) DIN and 3.5mm external speaker plug are already attached and wired to the 5 pin DIN. All you add is the mating connector for the transceiver/radio end of the cable. The cable is already prepped with 1/2 inch of each wire exposed, and 1/8 inch bare wire stripped, and solder tinned for easy attaching to your radio mating plug.
$3.95 each, model 5DMXSee cable diagram and wire color codes below.
↓
SIX (6) foot shielded cable with all 8 wires attached to the 8 pin screw-on microphone connector. Got a new "super-mic", or need to interface another device to the mic jack.... here's the solution.
See cable diagram and wire color codes below.
↓$4.95 each,
Order Model 8M
PLUG & JACK COMBO PJ25
High Quality at half the price ! 1/4 inch Stereo, Plug & Jack set. Complete with all mounting hardware. Jacks are "closed-circuit" type, however they may be wired configured as; Mono, Stereo, or Open-Circuit. set (Plug & Jack) $4.95
10 feet long, Category 5 Cable (Unshielded Twisted Pair) A multipair (usually 4 pair) high performance cable that consists of twisted pair conductors, used mainly for data transmission. Note: The twisting of the pairs gives the cable a certain amount of immunity from the infiltration of unwanted interference.
Basic cat 5 cable was designed for characteristics of up to 100 MHz. Category 5 cable is typically used for Ethernet networks running at 10 or 100 Mbps.
Use for Mic Cable to Radios with RJ45 Mic I/O
Use with RJ45 Switch Box below.
10 feet long, Category 5 E Shielded Cable (enhanced/Shielded) Same as Category 5, except that it is made to somewhat more stringent standards The Category 5 E standard is now officially part of the 568A standard.
Category 5 E is recommended for all new installations, and was designed for transmission speeds of up to 1 gigabit per second (Gigabit Ethernet).
Use for Mic Cable to Radios with RJ45 Mic I/O
Cables, Connectors, and switch-box sets shown on this page may be employed by the user at his or her risk. No liability is assumed by BUX COMM or its employees due to the use and/or misuse of these devices, products, cables, and/or switches. WE DO NOT MAKE SELECTIONS FOR YOU.
PacComm, Pico-Packet Back To Top
Icom Transceivers with receive audio at pin 8 of the mic jack to PacComm "PicoPacket" TNC
Icom Transceivers with RJ45 microphone jack to PacComm "PicoPacket" TNC
ALINCO, AZDEN, Icom, KENWOOD, and YAESU, and transceivers with 6 pin Mini DIN ISO 9002 Data I/O, (ISO standard) to PacComm "PicoPacket" TNC
We Accept
![]()
![]()
Mail or FAX form CLICK HERE!
DVM 810
PocketCraft 810B. Here's a digital multimeter (DVM). Ideal for the Mountain-topper HAM Radio Operator, or technician. It has an LCD 3.5 digit readout
Features found on more expensive meters are standard on this DMM, they include:
* A transistor and diode tester
* DC Amperes* AC Amperes
* Overload protection
* 7 functions & 19 Ranges
* Includes 21" test leads and battery.
Ranges to: 1000 Volts DC, 750 Volts AC, 10 Amps DC, Resistance to 2,000,000 Ohms
Order DVM810
$ 9.95
We can build these interface cables for most all transceivers. eMail Buck with your inquiry.
TheNET (X1J4 Rev 5) EPROM for TNC2, MFJ, & PacComm Node/TNC;
CLICK HERE for order form;
6 FT DATA CABLE
Dsub Male to Dsub Female is a high quality DB9 male to DB9 female. It fills the requirements of many applications, including giving extra length to that RASCAL comport control cable. It has precision molded connectors, and foil shielding, with 9 wires including ground/drain wire. $1.99 each
ORDER No. DSUB6MF
Cables, Connectors, and switch-box sets shown on this page may be employed by the user at his or her risk. No liability is assumed by BUX COMM or its employees due to the use and/or misuse of these devices, products, cables, and/or switches. WE DO NOT MAKE SELECTIONS FOR YOU.
We Accept
|
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Serving Telecommunications and HAM Radio since 1969
Monday thru Saturday 9am to 4pm Eastern, Call Toll-free, 1 866 300 1969 & 1 800 726 2919 Orders Only!
We accept VISA, DIScover, and Master Card. Be sure to have your Order numbers ready, All orders ship same business day
BUX COMM corp. We Accept;![]()
All text and graphics on these pages are ��� of G. E. Rogers Sr and BUX COMM Corp 1986 - 200
6
For tech support, Email: S U P P O R T @ B U X C O M M . c o m* "RASCAL" is Registered trademark �� of BUX Communications Corp (BUX CommCo �) *(RASCAL�� "Radio And Sound Card Adapter Link")