READ WHAT CUSTOMERS SAY ABOUT BUXCOMM PRODUCTS

Here's what our customers say about BUX COMM Products

From: JIM CRAWFORD

Sent: Tuesday, January 16, 2007 12:27 PM

To: [email protected]

Subject: BUXCOMM 806136 Windom

Just a note to let you know I have my new Windom up and on the air.

.

"After using an old trap dipole for years, I decided something else had to be better. Comparing antennas and price I settled on the BUXCOMM 806136.

Does it work!   YES! Being not able to QSY up or down the band with the trap dipole, it is no problem now. Have worked Hawaii on 40 SSB with 5 watts (5/3) and all but 3 states now.

People ask what antenna am I using? Can't believe it's a BUXCOMM Windom.

Others make this antenna, but for much more money, BUXCOMM made it right, and at fair price."

Did not trim it a bit and works great. Only with I had room for the 160 model, Hi!

No I don't have to wear out the rotator.

Thank for a great product.

Jim Crawford K5YC

From:         Marv, K2IPH
Sent:          Monday, July 24, 2006 8:50 PM
To:             BUXCOMM Corporation
Subject:     BUXCOMM Windom Model 166260

WOW, what an antenna.
Bought your 160260 Windom. First contact on 40 was tonight. 9K2CQ with a5/9, broke through a pileup barefut with an FT857D.
Great antenna

Marv, K2IPH

From:          Charles W4CXF
Sent:           Sunday, July 23, 2006 10:16 AM
To:               [email protected]
Subject:      absolutely the best

Dear BUX COMM

I purchased the BUXCOMM WINDOM two weeks ago, and put it up this weekend. I can say, it is without a doubt, the most impressive antenna I have ever used, both construction and performance. Although it is rated at 750 watts, I have been running 1000 watts ssb into it.

Our tests show that 15 mtrs needed the use of our Vector tuner. The SWR on 15, it was a little over 3 to 1. All other bands (75, 60, 40, 20, 17, 10, and 6 meters) had a 1.5:1 or less and no tuner was needed. The antenna worked extremely well with our 756 Pro III. Of all the wire type, all-band antennas I have built and used over my 45+ years as a ham, this antenna is absolutely the best. I highly recommend the BUXCOMM (806136) WINDOM antenna.

Keep up the good work
73 Chuck
Bessemer, AL

PS, It's truly more than we expected and at such a reasonable price.

From:      Andy KA3ODJ

Sent:       Wednesday, June 07, 2006 6:49 PM
To:          [email protected]
Subject: 166261W100

Just wanted to let you know that your 166261W100 antenna here at KA3ODJ is working like Gang Busters. We purchased the antenna
primarily as a 160 Meter antenna for the Internet Remote Base. The SWR and performance exceeded what I had expected, I have
added it to the selection choices for the other bands. Can not wait to get the ends up higher, they are only 35" or so right now.

Getting good reports from the users of the Internet Remote Base. No RF Problems at the coax end either, I also am using one of your
Master Match at the antenna switch. I am running an Icom PW1 and in the past, I've had RFI issues in the shack resetting the computer, but no more, with this new BUXCOMM Windom, it's clean as a whistle.

Feel free to give your antenna a try if you like. To operate Remote, You will have to download W4MQs software to get access. http://wpmq.com.

Thanks for a great product at a fair price.

Andy
KA3ODJ

From: Byron Watson
Sent: Friday, March 10, 2006 7:26 PM
To: [email protected]
Subject: thanks a bunch

Hey Buck, just had to let you know i'm impressed.....great product, super fast shipping and even answered my tech questions within an hour.

It's getting harder and harder in today's world to find service like this.....Thats why you got an order from K4RED today....I told him he HAD to get his rascal from BUXCOMM no ifs or buts....

Again thanks, look for me on PSK31....

BTW, just got my amateur extra license and ready to roll!!!!!

73
Byron N4TIZ

From: Tom Osborne
Sent: Friday, March 10, 2006 10:14 PM
To: [email protected]
Subject: Re: RASCAL with TS 450

HI Buck

Got the RASCAL today in fast time. It's my 3rd one. I recommend them to all my friends.

73 Tom

From: Jon ]
Sent: Saturday, September 17, 2005 11:21 PM
To: [email protected]
Subject: DBLCOMBO Compact antenna

I got your dblcombo for 75 meter a few days ago, and finally got it on the tower leg this evening. (side of tower at about 25 feet).

I didn't even have to tune it and got a 1.1 swr! I was surprised, since I just followed the basic assembly instructions,
being on the side of the tower I was prepared to do some required adjustments. And surprised when I didn't,
And my at-11mp auto tuner lets me cover the entire 75/80 meter band with it.

To get the mount to fit the tower leg I had to drill the mounting holes out slightly, but modifications are a habit.

Thanks for a great little antenna!

Jon N0VTY

From: N4BGR
Sent: Friday, September 16, 2005 4:32 PM
To: [email protected]
Subject: RASCAL Mark V GLX...Bravo BUX COMM !

Buck,

Got my GLX for the TS480SAT today and It works like a charm!! Cute case and I love the "red eye"!

Thanks,

Bob N4BGR

From: K5XS
Sent: Monday, August 01, 2005 5:49 PM
To: [email protected]
Subject: F A S T service

Thanks for the great buying experience!

I placed my order at about midnight on Thursday night, and they arrived at my home in the mail today--Monday.

Thank you for sending the right stuff at a good price very quickly.   We'll do business again!

Bernie K5XS

From: Greg [cwdxer]
Sent: Saturday, September 03, 2005 10:42 PM
To: [email protected]
Subject: N4WO--Rascal Great Product

Hello BUX COMM

I ordered the rascal on a Thursday and it arrived that Monday. The set up I know now is simple. No TNC needed.

They say it right. "Plug and Play." My first RTTY Qso was today during the Russian RTTY WW Contest.

The rascal is one Great product.

73,

Greg N4WO

From: K5XS
Sent: Monday, August 01, 2005 5:49 PM
To: [email protected]
Subject: Great service

Thanks for the great buying experience!

I placed my order at about midnight on Thursday night, and they arrived at my home in the mail today--Monday.

Thank you for sending the right stuff at a good price very quickly. We'll do business again!

Bernie K5XS

Arkansas

From: Bob Evans
Sent: Sunday, September 04, 2005 9:02 AM
To: [email protected]
Subject: WOW !!!!!!!!!!!!!

The cable and switch arrived very fast, in Saturday's mail. The cable and switch work perfectly! The old 940 and RASCAL are on the air in the sound card mode !!!!!!!

You guys are great!!!!!!

Thanks !

Bob   K8AAB

From: Jim [nj7b]
Sent: Wednesday, September 07, 2005 1:30 PM
To: [email protected]
Subject: 80 thru 6 windom

I just want to say that the 80 thru 6 meter windom that I purchased from you is a remarkable antenna, I've had many antennas g5rv and other wires but none can compare to your windom, overall its a great do everything all band antenna.      thanks again for a great product NJ7B

From: Bill, AD5TD
Sent: Thursday, December 09, 2004 4:10 PM
To: [email protected]
Subject: Re: Order with www.packetradio.com

Just wanted to thank you for a great product.   I had it up and running in less than 15 minutes.

Like you say in the instructions, "most problems are with the configuration of the computer."

I read the directions and had the RASCAL on the air in less than 15 minutes.

Thanks again and 73 de Bill, AD5TD

From: harvey [K5PAX@]
Sent: Wednesday, July 28, 2004 10:45 AM
To: Bux Commco
Subject: RE: New Order with www.packetradio.com

Thanks Buck:

Just to let you know -- I've been using a BUX COMM, Rascal V on my first rig for about a year, and it works great. I'm a late blooming ham -- I learned CW from my Dad when I was 7, but didn't take the license test for 45 years. I expected to be working CW and Phone, but got on PSK a few weeks after I got on the air, and never looked back. I used the programs on your CD-ROM and have run successfully on BPSK31, QPSK31, PSK63, MFSK16, FeldHell, RTTY, FEC31, and a bunch more. I've spent 90% of my time on the soundboard digital modes and have been having a blast. They are the best thing for small stations with low power rigs and limited antenna systems. I've got DXCC and WAS in a year, primarily on the digital (PC soundcard) modes using a small mag-loop antenna (1 meter diameter) and less than 50 watts output. What can be better than that?

Quite honestly, if it wasn't for your website and the Rascal, I wouldn't have been half as active on the air. Some of the information/links on the website let me know just how simple the digital modes can be, and the plug and play RASCAL made it possible for someone like me. Other sites and books made the digital modes seem much to arcane, but your no-nonsense approach made it do-able for me.

The RASCAL V has worked flawlessly for a year, and I run an average of 2-3 hours every day. For the prices you charge, the product is an amazing bargain. I just ordered the RASCAL GLX for a new rig which is due in soon.

So I guess this is a fan letter -- I know I've been meaning to drop you a note on this for a bit; In any case, thanks again, I appreciate it.

Harvey
K5PAX

From:      Kelly [KD7ALF@]

Sent:       Wednesday, July 14, 2004:   6:43 AM
To:          BUX COMM
Subject: Re: RASCAL GLX "Black Beauty"

Hello Buck and Company,

I wanted to drop you a note to tell you how happy I am with my RASCAL GLX “Black Beauty”.
First off, you and your crew did a STELLAR job getting my shipment out. I ordered on a Thursday afternoon and I received my package the following Monday. I tell ya’, you folks just DON’T mess around!

When I got my package inside and torn open, I couldn’t believe how quickly everything went together. I was up, running and receiving packets in about 15 minutes! Now I have a permanent station set up in my shack and I can send and receive APRS information to my heart’s content!

I only have one complaint…..

It’s going to take me a MONTH to go through all the software you sent on your CD!   LOTS of really good stuff my friend, I discover something new and exciting every day.

Thank you so much for such a great product and fantastic service. I’ll be ordering another of these as soon as I have my second antenna in the air and know which rig I’m going with.

Wishing you all the very best!

Kelly ~ KD7ALF (Satisfied Bux Comm Customer!)

From: Allen, N1jXF
Sent: Monday, May 31, 2004 10:43 AM
To: buck4abt
Subject: Re: RASCAL CBL

Received cable within 4 days of ordering it. Very fast. Cable is very well built, works great on my old KDK radio & overall, I am very impressed by your professional service. I will recomend you to other ops. Thanks for a great product. It sure beats the old days of pinning out an old pc cable and wiring a mic plug to it.

Thanks again. Allen, N1jXF in RI.

From: KE5GBV - Scott
Sent: Friday, May 28, 2004 6:22 PM
To: [email protected]
Subject: Re: Order

To whom it may concern,

I appreciate ordering with your company, and to add to it, you were right on time with your estimation on the arrival. You were 100% correct on the Delivery Date, and the items I ordered is exactly what I wanted, and have received Very Good reports on its Performance. Just can't beat it. I appreciate your help. Next I will be ordering a Base Antenna.

I appreciate doing business with your company, and so far, I have Two other HAMS who will be ordering with you.

KE5GBV - Scott

From: Larry K0LEJ
Sent: Sunday, May 16, 2004 6:56 PM
To: Bux Commco
Subject: Re: Rascal GLX

Hi Buck:

Thanks for the fast service. I was not expecting such a fast response.

I just got done with my first FSK contact. Talk about fun! The RASCAL GLX interface works great and I had no problems setting it up. Setting up the computer, on the other hand, took a bit of playing (old IBM ThinkPad running Windows 98). My first contact was on the FT-817 set at 2.5W using a Hamstick dipole.   I got a very good report into Florida. One of the best $40 I have spent!!!

Thanks for your help.

73 Larry K0LEJ

From: Terry VE3TKF
Sent: Wednesday, May 19, 2004 12:28 AM
To: [email protected]
Subject: Re: Rascal GLKit

Hello Buck:
Received my Rascal GLK last Fri.   Went together in a flash, and It works great. I made my cables for my TS-570 and the Yaesu FT 8800 transceivers and all work okay. I usually use Digipan but I tried the Winpsk which came on the disc and it is a super nice program.

Thanks 73 Terry VE3TKF

From: Lee KD7OED
Sent: Monday, May 10, 2004 6:20 PM
To: 'buck4abt'
Subject: RASCAL GLX

Buck,

Received Saturday, on-the-air Saturday afternoon. - thanks for another great product!

73, de KD7OED

From: KE4QDC Ferrell

Sent: Thursday, May 13, 2004 10:02 PM
To: [email protected]
Subject: 746pro

Buck got the rascal hooked up and it works fine. On my 746Pro nothing to do but make the connections and settings. Works fine on HF as well as VHF 2 meter. Just thought I would let you know there was no special settings that had to be done. Have made several contacts already.

Thanks for a good product

73   KE4QDC Ferrell

From: Rick NK9G
Sent: Thursday, March 11, 2004 11:39 PM
To: Bux Commco
Subject: Rascal GLX

Buck
Just back from the Caribbean from HI, 8P, J3, V2, KP2, and /MM. The Rascal GLX is nothing less than outstanding.
I used PSK-31/ QRP with a FT-817. I have the competition, and after this trip... they are no competition

Rick NK9G

From: walt KJ4HE
Sent: Monday, November 17, 2003 10:07 AM
To: [email protected]
Subject: GLX Order

Dear Buck:

Last week I ordered a Rascal GLX with the matching cable for my IC-706MK2. Just as it was mentioned on your web page, my order shipped the next day. I received it 2 days later, installed it immediately, and watched it perform flawlessly from the get-go.

It is a pleasure to deal with someone who does what he says, and who ships product that performs as advertised. I am now on PSK31 ..... painlessly .... and loving every minute of it.

Thanks for the great service!

Walt KJ4HE

From: Troy

Sent: Saturday, October 04, 2003 6:05 PM

To: [email protected]

Subject: Good job!

To BUX COMM:

This new RASCAL mark V GLX is fantastic, I ordered one and five minutes after getting it I was on PSK31 receiving great reports, no mess, no fuss, no difficulty.

Didn't really have any doubts though as the original Rascal kit I'd put together before has been serving me well on my other radio for some time without any trouble.

Thanks for a great, reasonably priced, full featured product.

Troy

AB0YZ

From: Bob N2RXK
Sent: Thursday, August 07, 2003 11:52 AM
To: [email protected]
Subject: Orders

Buck:

I have placed several orders to your firm over the last few months.

Your equipment is exceptional, your shipping the fastest I have ever seen, your prices very good, and I refer you to other hams.

Thank for all you do, it is good to know SOME American businesses still carry on in the American Tradition!!!

TNX de N2RXK Bob

From: Ed WD4GOY
Sent: Tuesday, January 14, 2003 10:56 AM
To: '[email protected]'
Subject: RASCAL

Thanks. Received the Rascal Monday. Great turn-around time!

Had it up and running in 10 minutes. First QSO was with a YV.
Thank you for a great product.
Will certainly recommend you to all my friends interested in PSK and digi modes.

Ed/WD4GOY

From: Bob N4HY
Sent: Tue 12/31/2002 5:55 PM
To: '[email protected]'
Subject: RASCAL

Buck:

I really like the new interface. I had it out of the box and running with all my radios in about

5 minutes. I really like the new RASCAL Mark V (RY) RTTY keying for my IC756Pro II.

Thanks for all your great work, at a great price.

Bob N4HY

From: Paul VE3HFQ
Sent: Tue 1/7/2003 2:59 PM
To: '[email protected]'
Subject: RASCAL

I wish to commend and thank you for your excellent service. Received the package in good order this afternoon. Great to see a firm that "thrives" on customer service. I shall be pleased to recommend your firm to other amateurs in the area. Keep up the excellent work!!!

Kind personal regards,

Paul (VE3HFQ)

From: Terry N8CDN
Sent: Thursday, December 05, 2002 9:02 AM
To: '[email protected]'
Subject: RASCAL mark V

Buck,

I just received my Rascal Mk V late Tues 12-3-02 and had it hooked up and working perfectly the next day after work. A few minor adjustments to the sound card settings is all it took. I had two quick PSK31 qso's on 20 meters and one station reported an IMD reading of -32 !. the Rascal appears to work on RTTY just fine as well. I was able to receive several stations and sent out a quick CQ and my signal sounded fine. Thanks for such a good quality product and excellent service. I will recommend your products to other hams,

73,

Terry N8CDN

From: Todd W4LA
Sent: Tuesday, November 05, 2002 9:02 AM
To: '[email protected]'
Subject: RASCAL mark V

It couldn't have been easier. In less than ten minutes I was on the air copying 20M PSK. Nice job on the construction Buck. Gotta go ! I want to operate more on this new exciting mode.

73's,    Todd / W4LA

Newton, NC & Greer, SC

From: EDWARD N3JOX

Wednesday, July 31, 2002 10:33 AM

To: Bux Commco

Subject: Rascal

Buck: Just wanted to let you know I got my order yesterday, hooked it up with no problems made one CQ call on 20 Meters and got a reply. It works Great.

Thank You very much,   I am one Happy customer.

Ed Mc Gowan

N3JOX

From: Malcolm Longland

Sent: Friday, July 19, 2002 2:47 PM
To: [email protected]
Subject: Thanks...

To all concerned.

I ordered a Rascal interface on Monday and amazingly it arrived here in Northern Ireland on Friday morning.

Needless to say it is installed and working 100%. Many thanks for the excellent service and good luck to you all.

73 de Malcolm Longland.

From: Alex, IK2XRW

Sent: Sunday, July 07, 2002 11:18 AM

To: Bux Commco

Subject: R: Order

TNX,

in reality I bought the RASCAL to run SSB & RTTY contest with Sound Blaster and pre-loaded messages as a DVK. First day all test works very fine... simple and easy to install.

Bye and see u soon on air.

IK2XRW, Alex.

From: M3RDX

Sent: Monday, July 01, 2002 1:35 PM

To: Bux Commco

Subject: Re: RASCAL RX, Par Avion

Hi Buck

I ordered my interface for the TS120s from you last monday it arrived in 1 week to the uk I connected up and was on the air within 5 minutes of the postman delivering !! it couldn't have been easier I worked hf0pol Antarctica with 5 watts psk31 also cuba and s. africa I am very pleased with your product and excellent service many thanks Ian M3RDX/QRP

p.s my friend was so impressed we ordered him one today thanks again Ian M3RDX/QRP

From: John,   @   Springfield, VA
Sent: Sunday, June 30, 2002 4:40 PM
To: [email protected]
Subject: Rascal Interface

I purchased the RASCAL two weeks ago and from the moment I opened it I knew I was going to enjoy it. It went together with out a hitch, as easy as the directions made it seem. Thanks for such a great product.

John H

From: Earl KE2DE
Sent: Thursday, June 27, 2002 2:54 PM
To: Bux Commco
Subject: Re: Rascal R-FTMDIN

Thanks Buck, for the pointers. I followed your advice and found that Win98 in the sound card was setup for desktop speakers and I am using a laptop so I changed it to laptop and now have sound out.

I set the levels in WinPSK and ALL Works Great!!

Thanks Again...Great Product, and Support

Earl

KE2DE

From: KA7EII Rocky

Sent: Sunday, June 02, 2002 1:41 AM
To: [email protected]
Subject: RASCAL R-FTMDIN Interface

Hello Buck,

Ordered my RASCAL on a Thursday and received it on Tuesday.

Finally got the computer out of the shop, and I have completed my first PSK31 QSO!

Your RASCAL works perfect with my FT-100D!

I've been having a ball on PSK31 and SSTV with help from your RASCAL!

Just want to thank you for making a great product that is easy to set up and use.    The RASCAL will help me to explore yet another facet of Amateur Radio.

Your CD is also great, lots of info on it.

73 es C U later.

KA7EII-Rocky.

From   Phil GU0SUP

Sent: Friday, May 24, 2002

To: [email protected]

Subject: the RASCAL R-5RY

Hi Buck,

Just been on air with the RASCAL R-5RY and it has performed very well indeed!
Had a QSO with 8P9AL and R1MVI on RTTY, and got through first call on each, so that can't be bad!

An excellent piece of hardware, and it performs very well on all the soundcard modes that I use: RTTY (AFSK and FSK), PSK, MT63, Hell, Throb etc,

I had to check the right option in MMTTY when selecting FSK, else we get a single tone as well Tx'd, which seems to be due to the option of having SOUND + FSK checked.

Nice piece, and the speed of delivery was truly amazing!

Thanks for your prompt attention, and nice to do business with you.

Very best 73, and kind regards

Phil GU0SUP
UK

From Glenn KD5DGA

Sent: Sunday, April 14, 2002 6:39 PM

To: [email protected]

Subject: the rascal

Buck,

I have one of your rascals for about two years now and haven't any problems from the get go. I have been using mmsstv, mmtty, digipan, zakanaka, uiss with agwpe packet engine, and hamscope.

This little rascal has opened so many doors in amateur communication that gave a new life for me.

Thanks,

Glenn KD5DGA

From: Larry, KA4QZQ

Sent: Thursday, February 28, 2002 10:32 AM

To: [email protected]

Subject: R-TT5PD

The nice little RASCAL box arrived about 1/2 hour ago and the hook up was simple enough. Now I've gotten rid of all my jury rig cables and especially the noise I had before in my desk top speakers of my computer.

Thanks a lot for a fine and inexpensive unit for PSK. I'm back in business as I had just purchased my new

Ten-Tec Jupiter 538 and it's working just great.

Larry, KA4QZQ

From: Joe KC8RKL
Sent: Sunday, February 24, 2002 6:16 AM
To: [email protected]
Subject: RASCAL Kit

Buck-

Had to drop you a line. I ordered a RASCAL interface kit for my Kenwood TS-570 early last week and received it Friday. I assembled it yesterday (Saturday) a.m., loaded the WinPSK 2.11 software you *also* provided, poked around the software for a while, made the requisite adjustments (per your great advice), ..

....and my first PSK contact was Roger W2INY in Sarasota, FL in mid afternoon on 20 meters.

Later in the evening, after setting up some macros, I QSO`d Georg DJ9LJ (Germany) and Paul HA3HV (Hungary)- all on 35 watts and an attic dipole.   Wow!

Having a blast. Thanks very much.

VY 73

Joe KC8RKL

From: M Wagner,   K8SWL
Sent: Monday, February 11, 2002 5:29 PM
To: [email protected]
Subject: Received Rascal Kit –Thanks

Buck, Received Rascal Kit today.

Great service, mail money order to you on Monday, receive kit the next Monday.

It doesn't get any better!!!!

Thanks

Mike K8SWL

From: Ronald    ke4vpn

Sent: Sunday, February 10, 2002 6:43 PM
To: [email protected]
Subject: Rascal came in and works FB

Hello Buck

Thanks for the quick shipping on the Ten Tec Pegasus Rascal interface, it works fine business. No problem at all with PSK31 or SSTV. I did not know the first thing about the modes and it was nice to get a product that works first time. I don't usually write vendors but I am so pleased with the product that I thought I would let you know.
73 de ke4vpn

Ronnie

-----Original Message-----
From: John--K3MZV
Sent: Saturday, February 02, 2002 10:42 AM
To: [email protected]
Subject: Good Job

Buck:

Received the Rascal R-5 Today --Great service.

The Rascal does a good job with my IC-735.

Thanks for a good product,

John--K3MZV

From: Brad, W4INT

Sent: Wednesday, January 30, 2002 6:51 PM

To: [email protected]

Subject: RE: RASCAL

Hello there,

Just though I would drop you a short note to say thank you for the great product!

I followed your instructions and even with the kids constantly asking questions had the
RASCAL kit together and working in less than 1.5 hours.

It works great as I have made numerous PSK31 contacts and now am working SSTV.
If I can ever be of a help to you in showing your product of giving a demo to HAMs in
my area please put my name on the list.

73 de W4INT

From: John,   KE3QG

Sent: Tuesday, January 29, 2002 8:54 AM
To: '[email protected]'
Subject: good stuff

I recently ordered a RASCAL for my ICOM 735, and your CD-ROM. The RASCAL hooked up very easily and the documentation was good.

With the programs on the CD-ROM, I didn't even have to download any software from the Internet.
As such, I was up and working both SSTV and PSK31 the day your shipment came (which was very prompt).

I highly recommend your products to anybody looking to get on the air quickly with these modes.

Thanks for the great products!   John,   KE3QG

From: W4MCQ
Sent: Saturday, January 26, 2002 2:37 AM
To: [email protected]
Subject: rascal interface

I just received my Rascal.   Hooked it up & works great !    Worth every penny !!!

Thanks !   Bruce W4MCQ

From: Roy
Sent: Saturday, January 12, 2002
To: [email protected]
Subject: Thanks for your quick shipment

Hello,

This is just a short note to tell you Thanks again for getting my order out so quick.

Last weekend I ordered one of your RASCAL's and it arrived this Friday evening. Got it hooked up and receiving Friday night. Finally found all the correct software menu settings (both radio and computer software) and made several PSK31 contacts today.

It works GREAT.

Thanks again,

Roy,   K5RLE

I got it! Worked with so much ease I couldn't believe it. You have done a great job with the RASCAL.

I have placed you on my web sites as a featured link www.w2blc.com and www.txrad.net

73, and keep up the good work.

Bill W2BLC/WA4BLC

It is A O.K. You did a great job building my RASCAL. My age is 72 and I enjoy amateur radio.

Best wishes to you for the new year. 73 Chuck     n4mis

From: Patrick
To: BUX CommCo
Subject: FT-817 interface issues

Buck, Just some feedback on your FT-817 interface.

I've been using it for a couple of weeks now and it works great, I did have a little trouble getting my FT-817 to modulate and had to adjust the level on the Rascal and set the sound card out level.   I have built your interface for my ICOM 718 and did not have any problems.

From: Charles
Sent: Saturday, September 29, 2001 1:54 PM
To: [email protected]

I want to say that I enjoy psk31 very much and your RASCAL 5 makes it so easy!

Thanks much,

Charles/W5CDS

From: Eric [kg4lul]
Sent: Thursday, September 13, 2001 2:38 AM
To: [email protected]
Subject: RASCAL - Thank You!

Thank you for fulfilling my order so quickly!   The RASCAL works great!!!!

From: MAC [w9iv]
Sent: Sunday, July 29, 2001 1:39 PM
To: Buck Rogers, K4ABT
Subject: RASCAL PSK INTERFACE

This is a "thank-you" message, Buck, to tell you that the RASCAL PSK interface which I ordered from you a few days ago has arrived, been installed, and is working perfectly. The promptness with which you responded to my initial inquiry, and the promptness with which you shipped the product, were truly impressive.

If you ever need a happy customer to recommend you and/or your products, just call on me; I'll respond in the same great fashion that you displayed to me!

                 73,   MAC, W9IV

From: Gary
Sent: Tuesday, December 11, 2001 7:16 PM
To: [email protected]
Subject: Rascal

I wanted to let you know how great I think the rascal I purchased from you is. It was so easy to hook up and with the software you sent I had it up and running in less than 30 minutes. I will be purchasing more and recommending it to anyone wanting to get started with PSK31.

Thanks, 73

Gary

From: Art
Sent: Tuesday, November 27, 2001 9:18 AM
To: [email protected]
Subject: Re: Order

Thank you! Order received and working well.
Very nice system you have developed. Installed easily and was up and running within minutes of arrival.
Thanks for such good service and a nice product!
Art K6ALC

From: G0NCS
Sent: Monday, November 12, 2001 11:01 AM
To: [email protected]
Subject: thanks

hello om thank you for the rascal unit which arrived safe and well, i was on the air within ten minutes working like a dream come true, a very nice bit of kit more than pleased hope to be in contact soon.

thanks a lot de g0ncs tim

From:                     Hesh
Sent:                      Tuesday, September 04, 2001 8:16 AM

To:                         'BUX CommCo'

Subject:                 RASCAL

Hi… I received the ‘Rascal’ - it works great!

Thanks

Hesh N1MDX

Sent: Monday, December 31, 2001 4:27 AM

To: [email protected]

Subject: Happy holidays, TNX for everything in '01

Hi Buck:

I just wanted to say thanks all the good products and support

I'm using the PSK31 interface, it's working great. Your website is

great place to find all kinds of info.

Again thanks, happy holidays and may the good Lord take a liking to you!

Hank - N8DOE

Sent: Wednesday, October 10, 2001 3:02 PM
To: k4abt
Subject: HI

Heard you on the air the other day. Condx were poor or I would have given you a call.

Love my RASCAL.

Bob, K6VIB
Quartz Hill, Ca.

Sent: Tuesday, December 11, 2001 8:07 PM

To: [email protected]

Subject: Praise

I just wanted to thank you for a wonderful product. I ordered your RASCAL

kit for my Kenwood TS-130 last week. I received it on Monday of this week

and already have it assembled and on the air.

73, Russ