Package of Three (3) Antenna Insulators made of high tensil strength TyNyte.
Insulating characteristics of air.
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
The SILVER SALUTE is a Superior Quality Base Station Microphone for Amateur Communications. The 0SSS has a dynamic element that provides clear, crisp audio for perfect communications.
The Silver Salute is chrome plated and features a grip-to-talk bar and a press-to-talk bar. The microphone head is secured to the chrome mast by means of a knurled retainer nut.Six (6) wire desk microphone with built-in tailored audio amplifier for top quality, clear, crisp, telecommunications contacts.
CAT No, 100, YAESU FT 990, FT 1000, TenTec Pegasus Jupiter to PK12, PK96, PK900, DSP 232, 6 ft
YAESU FT-990, FT-1000, FT1000 MK V, TenTec Pegasus & Jupiter to PK12, PK96, PK900, DSP-232, MFJ 1278, 1270, 1274, PacComm Tiny II
1000D RASCAL GLX to YAESU FT1000D transceivers with 5 pin DIN Accessory jack
CAT No, 1000DRY, YAESU FT1000D Transceiver PSK31 Interface cable 6 ft
CAT No, 1000D, YAESU FT1000D Transceiver PSK31 Interface cable 6 ft YAESU FT-1000 D Transceiver PSK31 Interface cable NOTE Receive AF is at RING of 3.5mm plug. For FSK/RTTY operation, Use cable CBL FT4RY (see, FSK only!)
May be used with TNCees having 5 pin DIN Radio ports.YAESU FT-1000 MP Transceiver PSK31 Interface cable
This cable is fully tested, and YES, after wiring and soldering these thirteen (13) tiny pins we still have our eyesight. The cable is shielded, with all 14 pins wired, and color coded for easy wiring. Right, 13 color coded wires, and one bare drain wire.
Standard 13 pin DIN
Plug MALE
Used as accessory plug to interface data input and output to many
Kenwood & Icom transceivers. e.g. PSK31 I/O $2.95
ea. Order 13DMP
Weatherproof all out door antenna connectors with CoaxSeal No. CS104
1509, VHF 139 to 174 MHz Mag Mount Mobile Antenna power rated 200 watts.
with 12 ft RG 58/U coax and PL 259 attached. VSWR better then 1.5:1.
Specifications and Features:
- Magnet antenna mount type: Super strong
- Magnet mount sizes: 5 inches
- Thread connection: NMO
- Low loss RG-58A/U + PL-259 plug:
- 14-foot with top quality PL259 attached.
NICKEL-PLATED RCA PANEL-MOUNT JACK - RED
Order Code: CA055R
Specifications
- color: red
- hole: ? 0.24"
- panel thickness: max. 0.19"
- insulation: colored nylon
RMS power is 500 watts FSK and FM
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.5 kw SSB @ 2.5:1 VSWR
Our 1606G5RVL is power rated at 750 watts SSB/pep and includes 50 ft of RG8X coax with PL259 connectors installed.
166260, 160 thru 6 meter (multi-band) WINDOM Completely assembled. Includes 4:1, 1.2kw BALUN attached.
A = 41 strands,silver flashed, copper, with flex-PVC, non-metallic insulation.
B = 1.2 kw SSB BALUN made of UV resistant material
C = Center Insulator with BALUN suspension and hanger eyebolt.
D = Documentation and related files.
E = Center Eyebolt for suspension from tower or other support.
F = Heavy Duty, High-tensil strengh, End Insulators with non-flashover disc.
G = Ty-Tails included to attached end insulators to supports.
Learn more about this fabulous antenna at:
http://www.packetradio.com/windom.htm
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.2 kw SSB @ 2.5:1 VSWR
RMS/FSK & AM @ 700 watts.
Don t forget CoaxSeal, CS104.
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect.
Power Rated @ 1000 watts SSB @ 2.5:1 VSWR
166260B, 160 thru 6 meter WINDOM Completely assembled. Includes 6:1 BALUN, 1000 watts SSB @ 2.5:1 VSWR
This B version is supplied with our MM61, 6:1 BALUN. Assembled ready to connect your coax and erect. 1000 watts SSB @ 2.5:1 VSWR166260C, 160 thru 6 meter (multi-band) WINDOM Completely assembled. Includes 4:1, 1.2kw BALUN attached and 100 ft RG8X coax cable with PL259 at each end.
A = 41 strands,silver flashed, copper, with flex-PVC, non-metallic insulation.
B = 1.2 kw SSB BALUN made of UV resistant material
C = Center Insulator with BALUN suspension and hanger eyebolt.
D = Documentation and related files.
E = Center Eyebolt for suspension from tower or other support.
F = Heavy Duty, High-tensil strengh, End Insulators with non-flashover disc.
G = Ty-Tails included to attached end insulators to supports.
Learn more about this fabulous antenna at:
http://www.packetradio.com/windom.htm
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.2 kw SSB @ 2.5:1 VSWR
166260L, 160 thru 6 meter (multi-band) WINDOM Completely assembled. Includes 4:1, 1.2kw BALUN attached and 50 ft RG8X coax cable with PL259 at each end.
A = 41 strands,silver flashed, copper, with flex-PVC, non-metallic insulation.
B = 1.2 kw SSB BALUN made of UV resistant material
C = Center Insulator with BALUN suspension and hanger eyebolt.
D = Documentation and related files.
E = Center Eyebolt for suspension from tower or other support.
F = Heavy Duty, High-tensil strengh, End Insulators with non-flashover disc.
G = Ty-Tails included to attached end insulators to supports.
Learn more about this fabulous antenna at:
http://www.packetradio.com/windom.htm
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.2 kw SSB @ 2.5:1 VSWR
RMS/FSK & AM @ 550 watts. .
Don t forget CoaxSeal, CS104.
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect.
Power Rated @ 1000 watts SSB @ 2.5:1 VSWR
166261, 160 thru 6 meter (multi-band) WINDOM Completely assembled. Includes 6:1, 1.2kw BALUN attached.
A = 41 strands,silver flashed, copper, with flex-PVC, non-metallic insulation.
B = 1.2 kw SSB BALUN made of UV resistant material
C = Center Insulator with BALUN suspension and hanger eyebolt.
D = Documentation and related files.
E = Center Eyebolt for suspension from tower or other support.
F = Heavy Duty, High-tensil strengh, End Insulators with non-flashover disc.
G = Ty-Tails included to attached end insulators to supports.
Learn more about this fabulous antenna at:
http://www.packetradio.com/windom.htm
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.2 kw SSB @ 2.5:1 VSWR
Dont forget CAT No. CS104:
CAT No. CS104
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect.
Power Rated @ 1000 watts SSB @ 2.5:1 VSWR
166261C, 160 thru 6 meter (multi-band) WINDOM Completely assembled. Includes 6:1, 1.2kw BALUN attached and 100 ft RG8X coax cable with PL259 at each end.
A = 41 strands,silver flashed, copper, with flex-PVC, non-metallic insulation.
B = 1.2 kw SSB BALUN made of UV resistant material
C = Center Insulator with BALUN suspension and hanger eyebolt.
D = Documentation and related files.
E = Center Eyebolt for suspension from tower or other support.
F = Heavy Duty, High-tensil strengh, End Insulators with non-flashover disc.
G = Ty-Tails included to attached end insulators to supports.
Learn more about this fabulous antenna at:
http://www.packetradio.com/windom.htm
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.2 kw SSB @ 2.5:1 VSWR
166261L, 160 thru 6 meter (multi-band) WINDOM Completely assembled. Includes 6:1, 1.2kw BALUN and 50 ft coax attached.
A = 41 strands,silver flashed, copper, with flex-PVC, non-metallic insulation.
B = 1.2 kw SSB BALUN made of UV resistant material
C = Center Insulator with BALUN suspension and hanger eyebolt.
D = Documentation and related files.
E = Center Eyebolt for suspension from tower or other support.
F = Heavy Duty, High-tensil strengh, End Insulators with non-flashover disc.
G = Ty-Tails included to attached end insulators to supports.
Learn more about this fabulous antenna at:
http://www.packetradio.com/windom.htm
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.2 kw SSB @ 2.5:1 VSWR
Don t forget CoaxSeal, CS104.
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect.
Power Rated @ 1000 watts SSB @ 2.5:1 VSWR
RMS/FSK and AM @ 550 watts. .
Dont forget CATNo. CS104:
CATNo. CS104 20634, 20 thru 6 meter (multi-band) WINDOM Completely assembled. Includes 4:1, 1.2kw BALUN attached.
A = 41 strands,silver flashed, copper, with flex-PVC, non-metallic insulation.
B = 1.2 kw SSB BALUN made of UV resistant material
C = Center Insulator with BALUN suspension and hanger eyebolt.
D = Documentation and related files.
E = Center Eyebolt for suspension from tower or other support.
F = Heavy Duty, High-tensil strengh, End Insulators with non-flashover disc.
G = Ty-Tails included to attached end insulators to supports.
Learn more about this fabulous antenna at:
http://www.packetradio.com/windom.htm
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.2 kw SSB @ 2.5:1 VSWR
20634C, 20 thru 6 meter (multi-band) WINDOM Completely assembled. Includes 4:1, 1.2kw BALUN and 100 ft RG8X coax attached.
A = 41 strands,silver flashed, copper, with flex-PVC, non-metallic insulation.
B = 1.2 kw SSB BALUN made of UV resistant material
C = Center Insulator with BALUN suspension and hanger eyebolt.
D = Documentation and related files.
E = Center Eyebolt for suspension from tower or other support.
F = Heavy Duty, High-tensil strengh, End Insulators with non-flashover disc.
G = Ty-Tails included to attached end insulators to supports.
Learn more about this fabulous antenna at:
http://www.packetradio.com/windom.htm
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.2 kw SSB @ 2.5:1 VSWR
20634L, 20 thru 6 meter (multi-band) WINDOM Completely assembled. Includes 4:1, 1.2kw BALUN and 50 ft RG8X coax attached.
A = 41 strands,silver flashed, copper, with flex-PVC, non-metallic insulation.
B = 1.2 kw SSB BALUN made of UV resistant material
C = Center Insulator with BALUN suspension and hanger eyebolt.
D = Documentation and related files.
E = Center Eyebolt for suspension from tower or other support.
F = Heavy Duty, High-tensil strengh, End Insulators with non-flashover disc.
G = Ty-Tails included to attached end insulators to supports.
Learn more about this fabulous antenna at:
http://www.packetradio.com/windom.htm
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.2 kw SSB @ 2.5:1 VSWR
RMS/FSK & AM @ 550 watts. INCLUDES 100 Ft RG8X coax with PL259s installed.
Don t forget CoaxSeal, CS104.
RMS/FSK & AM @ 550 watts. Includes 50 Ft RG8X coax with PL259s installed.
Don t forget CoaxSeal, CS104.
Specifications
- type: mono
- boot in molded plastic
- for cable: ? 0.16
- solder connections
Specifications
- type: mono
- boot in molded plastic
- for cable: ? 0.16
- solder connections
Package of 10
2617, RCA Phono Plug to BNC Female Adapter.
2701C
, UHF male crimp type PL259 for RG174 mini coax.
2712, UHF PL259 Male to F Male adapter
CAT No, 27C512, BLANK EPROM (when programmed) is most often used as bank-switching X1J4 Node EPROM. All 27C512 EPROMs from BUXCOMM have been fully tested before being placed in anti-static material for shipping.
For X1J4 NODE EPROM form, Go To:
http://www.packetradio.com/EPROMform.
ERASURE OPERATION (APPLIES FOR UV EPROM) The erasure characteristics of our 27C512 is such that erasure begins when the cells are exposed to light with wavelengths shorter than approximately 4000 ?. It should be noted that sunlight and some type of fluorescent lamps have wavelengths in the 3000-4000 ? range. The recommended erasure procedure for our 27C512 is exposure to short wave ultraviolet light which has wavelength 2537 ?. The integrated dose (i.e. UV intensity x exposure time) for erasure should be a minimum of 15 W-sec/cm2. The erasure time with this dosage is approximately 15 to 20 minutes using an ultraviolet lamp with 12000 μW/cm2 power rating. The 27C512 should be placed within 2.5 cm (1 inch) of the lamp tubes during the erasure.
UHF Female (SO239) to TNC Male Adapter.
CAT No, 2917B TNC Male Clamp Type connector for RG8X & RG 59 Coax.
This 2002 CD contains both PSK31 Handbook, and Packet Radio HANDBOOKS PLUS Over 450 Megabytes of PSK31, Packet Radio, and HAM Radio related interface diagrams, illustrations, & tutorials! This CD also includes diagrams from 12 years of articles from my Packet Users Notebook in CQ Magazine. For Windows 95, 98, and XP, This CD contains full versions of WinPSK, HAMscope, AGWPE Soundcard Packet software, MT63, EchoLINK, EQSO, MTSSTV, MMTTY, WJST, and many more soundcard to transceiver software, freeware programs for use with all these digital modes, including Packet Radio.
OVER 50,000 COPIES NOW SOLD.
BUXCOMM MasterMatch BALUN's, are the choice of HAM operator's around the world.
Our BUXCOMM 2K11 is a multi-core, "true" current BALUN ideal for use feeding Dipoles, G5RV, and other antennas fed with standard 50 and 75 ohm coaxial cables.The BUXCOMM 2K11 BALUN is the ideal component to equalize currents in the antenna, and is often used a an Isolation TLT. Add to the features of our BUXCOMM 2K11 BALUN its inherient properties that prevents reradiation (high VSWR) from entering the coax feedline. The end result is lower SWR, and less TVI.
The BUXCOMM model 2K11 is Power Rated for 2000 watts PEP/SSB @ 2:1 VSWR
Wide band-width, 1.6 mHz to 56 mHz.
BUXCOMM BALUNS are designed by Communication Engineers, Built by Communication Engineers, and Made in the USA.
In few cases, BALUN colors or design appearance may vary from those shown.
Model Number: 2K11
BUXCOMM MasterMatch BALUN's, are the choice of HAM operator's around the world.
Our BUXCOMM 2K41 is a dual core, "current" BALUN ideal for use feeding Windoms, Folded Dipoles, and other antennas presenting feedpoint impedance's between 150 and 300 ohms to standard 50 and 75 ohm coaxial cables.The BUXCOMM 2K41 BALUN is the ideal component to equalize currents in the antenna elements and different length legs. Add to the features of our BUXCOMM 2K41 BALUN its inherient properties that prevent re-radiation (high VSWR) from entering the coax feedline. The end result is a more stable antenna system, with less TVI.
The BUXCOMM model 2K41 is Power Rated for 2000 watts PEP/SSB @ 2:1 VSWR
Wide band-width, 1.6 mHz to 56 mHz.
In few cases, BALUN colors or design appearance may vary from those shown.
BUXCOMM BALUNS are designed by Communication Engineers, Built by Communication Engineers, and Made in the USA.
BUXCOMM MasterMatch BALUN's, are the choice of HAM operator's around the world.
Our BUXCOMM 2K61 is a dual core, TRUE "current" BALUN ideal feeding Windoms, Folded Dipoles, Full-Wave Loops and similar antennas presenting feedpoint impedance's between 250 and 350 ohms to standard 50 and 75 ohm coaxial cables.The BUXCOMM 2K61 BALUN is the ideal component to equalize currents in the antenna elements and different length legs. Add to the features of our BUXCOMM 2K61 BALUN its inherient properties that prevents reradiation (high VSWR) from entering the coax feedline. The end result is a more stable antenna system, with less TVI.
The BUXCOMM model 2K61 is Power Rated for 2000 watts PEP/SSB @ 2:1 VSWR
Wide band-width, 1.6 mHz to 54 mHz.
BUXCOMM BALUNS are designed by Communication Engineers, Built by Communication Engineers, and Made in the USA.
In few cases, BALUN colors or design appearance may vary from those shown.
Model Number: 2K61
BUXCOMM MasterMatch BALUN's, are the choice of HAM operator's around the world.
The 2K91 BalUn can be suspended in the same manner as the Black Hawk and other BUXCOMM BALUNS.
BUXCOMM BALUNS are designed by Communication Engineers, Built by Communication Engineers, and Made in the USA.
In few cases, BALUN colors or design appearance may vary from those shown.
2METERWHIP
19 inch Stainless Steel Whip with 3/8 inch x 24 Stud MountVSWR Set-Screw,
Freq Range 144-148 MHz
Unity Gain
4 MHz Bandwidth
Fits Three-eighth by 24 threaded base.
Model Number: 2METERWHIP
This antenna out-performs many of todays so-called Scanner antennas. With the "low-angle-radiation" radials, your transceiver and scanner will reach-out- and pull in those distant VHF & UHF signals.
Dont forget CAT No. CS104:
CAT No. CS104 2MGPW50, Two meter Advanced Design ground plane with Colinear effect mounting,
Two meter "Advanced Design" High performance, Broad-band, Ground Plane. This antenna out-performs many of todays so-called Scanner antennas.With the "low-angle-radiation" radials, your transceiver and scanner will reach-out- and pull in those distant VHF & UHF signals.
Antenna includes 50 feet coax with PL259 attached at each end.
CAT No, 2N3772, replaces both 2N3771 & 2N3772 High power TO3 sized regulator transistor used in many Astron 25 to 45 AMP, 13 volt Astron power supplies.
See matching LM723 regulator/driver IC for this power transistor. When lightning strikes, have plenty of these on hand for your Astron, and other regulated power supplies.
3001 Powdered Iron Composition Core
This doughnut recommended for High Power BALUN construction. Dimensions:
:
OD=1-1/4 :
ID=3/4 :
H=5/16 :
3007, N Male to BNC Female Adapter.
3008, BNC Male to N Female Adapter
3015 N Male to UHF Male Adapter.
20 for 9.90
Dimensions:
0.73 O.D.
0.38 I.D.
0.41 high.
20 for 9.90
Dimensions:
0.73 O.D.
0.38 I.D.
0.41 high.
CAT No, 3061 No. 61 Composition Core, balun bobbin
Cat No. 3061 No. 61 Composition Material This Core has baked-epoxy finish to withstand 105 degrees C. The Epoxy coating is a scratch resistant, smooth finish for easy winding. These ferrite cores are used in RF power amplifier coupling stages and to make transmission line transformers for low-power (up to 250 watt) RF BALUN projects. Stack them for higher power rating.
Dimensions:
7/8 inch O.D.
1/2 inch I.D.
5/16 high.
Dimensions:
OD=1-1/2 inches
ID=7/8 inch
H=9/16 inch
3077 core is the perfect fit for RG8U, RG213, RG214, 9913, and large flexible coax cable of similar diameters.
By stacking 10 or more of these core bobbins, you can achieve a better 1:1 choke balun than using 40 of the small bobbins that crack when hit with high power.This package contains ten (10) of our CAT No, 3077 core is the perfect fit for RG8U, RG213, RG214, 9913, and large flexible coax cable of similar diameters.
By stacking 10 or more of these core bobbins, you can achieve a better 1:1 choke balun than using 40 of the small bobbins that crack when hit with high power.
Each winding measures 1.313 mHy.
Dimensions:(includes windings)
OD=1-1/4 inch
ID=1 inch
H=3/8 inch
Each winding measures 1.68 mHy.
Dimensions:(includes windings)
OD= 1-1/4 inch
ID= 1 inch
H= 3/8 inch
hand-held pin spacing for the 2.5mm & 3.5mm molded plug.
CAT No, 3PDT, 3PDT ON-ON MINI-TOGGLE SWITCH
Rated 6 Amps, 125 Vac. Solder-lug terminals. CAT No. 3PDT Your Price: $1.95 each
RMS/FSK & AM @ 550 watts.
<
Dont forget CATNo. CS104:
CATNo. CS104
Power Rated @ 1000 watts SSB @ 2.5:1 VSWR
40670, 40 thru 6 meter (multi-band) WINDOM Completely assembled. Includes 4:1, 1.2kw BALUN attached.
A = 41 strands,silver flashed, copper, with flex-PVC, non-metallic insulation.
B = 1.2 kw SSB BALUN made of UV resistant material
C = Center Insulator with BALUN suspension and hanger eyebolt.
D = Documentation and related files.
E = Center Eyebolt for suspension from tower or other support.
F = Heavy Duty, High-tensil strengh, End Insulators with non-flashover disc.
G = Ty-Tails included to attached end insulators to supports.
Learn more about this fabulous antenna at:
http://www.packetradio.com/windom.htm
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.2 kw SSB @ 2.5:1 VSWR
40670C, 40 thru 6 meter (multi-band) WINDOM Completely assembled. Includes 4:1, 1.2kw BALUN and 100 ft RG8X coax attached.
A = 41 strands,silver flashed, copper, with flex-PVC, non-metallic insulation.
B = 1.2 kw SSB BALUN made of UV resistant material
C = Center Insulator with BALUN suspension and hanger eyebolt.
D = Documentation and related files.
E = Center Eyebolt for suspension from tower or other support.
F = Heavy Duty, High-tensil strengh, End Insulators with non-flashover disc.
G = Ty-Tails included to attached end insulators to supports.
Learn more about this fabulous antenna at:
http://www.packetradio.com/windom.htm
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.2 kw SSB @ 2.5:1 VSWR
40670L, 40 thru 6 meter (multi-band) WINDOM Completely assembled. Includes 4:1, 1.2kw BALUN and 50 ft RG8X coax attached.
A = 41 strands,silver flashed, copper, with flex-PVC, non-metallic insulation.
B = 1.2 kw SSB BALUN made of UV resistant material
C = Center Insulator with BALUN suspension and hanger eyebolt.
D = Documentation and related files.
E = Center Eyebolt for suspension from tower or other support.
F = Heavy Duty, High-tensil strengh, End Insulators with non-flashover disc.
G = Ty-Tails included to attached end insulators to supports.
Learn more about this fabulous antenna at:
http://www.packetradio.com/windom.htm
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.2 kw SSB @ 2.5:1 VSWR
RMS/FSK & AM @ 550 watts.
Don t forget CoaxSeal, CS104.
Power Rated @ 1000 watts SSB @ 2.5:1 VSWR
RMS/FSK & AM @ 550 watts.
Don t forget CoaxSeal, CS104.
Power Rated @ 1000 watts SSB @ 2.5:1 VSWR
RMS/FSK & AM @ 550 watts.
Dont forget CATNo. CS104:
CATNo. CS104 Power Rated @ 1000 watts SSB @ 2.5:1 VSWR
40671, 40 thru 6 meter (multi-band) WINDOM Completely assembled. Includes 6:1, 1.2kw BALUN attached.
A = 41 strands,silver flashed, copper, with flex-PVC, non-metallic insulation.
B = 1.2 kw SSB BALUN made of UV resistant material
C = Center Insulator with BALUN suspension and hanger eyebolt.
D = Documentation and related files.
E = Center Eyebolt for suspension from tower or other support.
F = Heavy Duty, High-tensil strengh, End Insulators with non-flashover disc.
G = Ty-Tails included to attached end insulators to supports.
Learn more about this fabulous antenna at:
http://www.packetradio.com/windom.htm
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.2 kw SSB @ 2.5:1 VSWR
40671C, 40 thru 6 meter (multi-band) WINDOM Completely assembled. Includes 6:1, 1.2kw BALUN and 100 ft RG8X coax attached.
A = 41 strands,silver flashed, copper, with flex-PVC, non-metallic insulation.
B = 1.2 kw SSB BALUN made of UV resistant material
C = Center Insulator with BALUN suspension and hanger eyebolt.
D = Documentation and related files.
E = Center Eyebolt for suspension from tower or other support.
F = Heavy Duty, High-tensil strengh, End Insulators with non-flashover disc.
G = Ty-Tails included to attached end insulators to supports.
Learn more about this fabulous antenna at:
http://www.packetradio.com/windom.htm
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.2 kw SSB @ 2.5:1 VSWR
40671L, 40 thru 6 meter (multi-band) WINDOM Completely assembled. Includes 6:1, 1.2kw BALUN and 50 ft RG8X coax attached.
A = 41 strands,silver flashed, copper, with flex-PVC, non-metallic insulation.
B = 1.2 kw SSB BALUN made of UV resistant material
C = Center Insulator with BALUN suspension and hanger eyebolt.
D = Documentation and related files.
E = Center Eyebolt for suspension from tower or other support.
F = Heavy Duty, High-tensil strengh, End Insulators with non-flashover disc.
G = Ty-Tails included to attached end insulators to supports.
Learn more about this fabulous antenna at:
http://www.packetradio.com/windom.htm
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.2 kw SSB @ 2.5:1 VSWR
RMS/FSK & AM @ 550 watts.
Don t forget CoaxSeal, CS104.
Power Rated @ 1000 watts SSB @ 2.5:1 VSWR
RMS/FSK & AM @ 550 watts.
Don t forget CoaxSeal, CS104.
Power Rated @ 1000 watts SSB @ 2.5:1 VSWR
The best antenna purchase you will find anywhere. All this for only 49.95, READ MORE ABOUT THIS COMPACT, Multi-Band Antenna !
406NT, Our own multi-band HF antenna, covers 40 through 6 meters without an antenna tuner.
This BUXCOMM 406NT requires only 67 feet of real-estate. By using an antenna tuner, the BUXCOMM 406NT can operate 75 meters.
This is not a kit ! This antenna is complete as shown. All items are connected and ready to attach your coax and erect.
BUXCOMM, 406NT is complete, assembled, and includes: * End Tye Wire
* End insulators
* Right and Left Radiator (10M) elements
* Center Insulator with suspension eyebolts.
* Sixty feet, 450 ohm LadderLine
* Dual-Core BUXCOMM "Current Balanced" **, BALUN
* Power-Rated, 500 watts
** Built specifically for the BUXCOMM NT" antenna.
Cat # 43813
O.D.mm = 38.1 (1.5 inch) I.D.mm = 19 (.75 inch) HTmm =12.7 (0.5 inch) R= 3,850
Our number one selling toroid iron core for BALUN construction.
Model Number: 43813
Ten of our Cat # 43813
O.D.mm = 38.1 (1.5 inch) I.D.mm = 19 (.75 inch) HTmm =12.7 (0.5 inch) R= 3,850Ten 43813, Model Number: 43813X10
Our number one selling toroid iron core for BALUN construction.
Model Number: 43813X10
CAT No, 4CYXJACK 3.5 mm 4 Conductor INLINE JACK mates our 4 circuit plug. [4CYXPLUG]
Compatible with our:
VX4, 4 circuit 3.5mm Plug and Coiled Cable
and
VXS Four conductor 4 circuit 3.5mm Plug with long straight cable.
4 conductor , 3.5 mm mini phone jack in -line with strain relief .
It is RoHs compliant.
The BUXCOMM 4E2M introduces a new match-method.
The BUXCOMM X-match is Direct Fed, with flash-phasing.
V BALUN is included.
Fiber Glass Boom length is 48 The 4E2M provides 9.5 dbi Gain, with 18 dB front to back ratio.
Strong, solid elements provide rigid support in harsh environments.
All mounting hardware is included; some assembly required.
Antenna is easily rotated using light-weight TV antenna rotor.
BUILT BY BUXCOMM in the USA.
Built to withstand harsh environments and to commercial two-way Radio Standards.
Four solid elements Gain 8.2 dbd, 430 to 450 MHz, 
4 pole, double throw mini switch, Three position, On-Off-On
Now you can build that switchbox to your specs.
This switch will enable switching Tx AF, Rx AF, PTT, & MIC ground, etc...
SKU Number:4PDTOOO
![]("/img/8xjmpr.jpg")
- FT2800,
- FT90R,
- FT8200,
- FT1802,
- YAESU transceivers with 6 pin modular RJ12 microphone jack.
It is used with the Icom transceivers with RJ45 microphone jacks.
IC 2100, IC 2200, IC 706, 703, and othr Icom radios with the 8 pin Modular (RJ45) I/O hjacks. ICOM RJ45 to TNCs with 5 pin DIN Radio Ports MFJ, SCS, PacComm, some late-model AEA multi-mode controllers, 6 ft
TNC2 Cable from MFJ, PacComm, and TNCees with 5 pin DIN radio port, to ICOM HF-VHF Transceivers with 4 pin screw-on mic & Ext Spkr
ICOM models IC-202, IC-211, IC-215, IC-22S, IC-245, IC-280, IC-402, IC-502, etc�Icom transceivers with 4 pin Mic I/O jack. This cable provides input and output to both jacks.
ICOM HF VHF UHF Transceivers w 8 pin Screw On MIC & Ext Spkr jack. Icom transceivers with 8 pin screwOn mics.
ICOM HF, VHF,/UHF Transceivers w/8 pin Screw-On MIC & Ext Spkr jack. ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746, 756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics. Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751, . . MORE +
ICOM HF VHF UHF Transceivers w 8 pin Screw On MIC & Ext Spkr jack. Icom transceivers with 8 pin screwOn mics.
ICOM HF, VHF,/UHF Transceivers w/8 pin Screw-On MIC & Ext Spkr jack. ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746, 756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics. Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751, . . MORE +
- MFJ TNCees,
- AEA TNCees PK-900, PK2232, PK12, 5 pin DIN Radio ports,
- PacComm Tiny II
- TNCees with standard 5 pin DIN Radio ports
- Cable length is 6 ft
5000 ohm, horizontal mount, trim-pot.
Regular $99.95, for a limited time, SAVE $20.00: the 658 introductory price, is $79.95.
Specs for the BUXCOMM Model 658 antenna
* Omnidirectional Pattern
* Durable fiber glass construction
* Gain 5.3 dBi; 3.7dBd
* Radials set to horizon for low angle of radiation and maximum distance.
* Four (4) 50 mHz quarter wave Radials for increased bandwidth.
* 2 mHz Bandwidth @ 1.5 VSWR
* Input Impedance, 50 Ohm
* Power Rated 500 Watts.
* Overall Length 14 ft
* DC grounded for added Lightning protection.
* Noise and static charge is shunted to ground.
Designed & Distributed exclusively by BUXCOMM Corp.
Six ft replacement microphone cable with shielded Tx audio lead
The DIN PLUG is wired with 6 ft shielded cable w/drain wire.
Most used with "CAT" jack I/O on YAESU Transceivers.
Opposite end is open with wire color code as follows:
1 = BARE/shield
2 = RED
3 = BROWN
4 = YELLOW
5 = GREEN
6 = BLUE
6 ft Cable is wire end to end, pin to pin, color code matches:
1 = Bare/shield to 1 = Bare/shield
2 = RED to 2 = RED
3 = BROWN to 3 = BROWN
4 = YELLOW to 4 = YELLOW
5 = GREEN to 5 = GREEN
6 = BLUE to 6 = BLUE
The DIN PLUG is wired with 6 ft shielded cable w/drain wire.
CAT No, 6MDNMM 6 pin mini DIN male to male.
This is a high quality six (6) ft cable with a high quality foil shield, with drain wire, and when used in high RF environments, this 99% shielding, reduces ingress noise and hum.
Cable may also be used as PS2 Keyboard extension.
6MGP, Six meter, advanced design, broad-band, High performance, Ground_Plane.
[6MGP] Six meter, advanced design, broad-band, High performance, Ground_Plane. Deep angle radials provide a lower angle of radiation to hit those distant repeaters, and stations.
Package of 10
Package of 10
Package of 10
Package of 10
Package of 10
Package of 10
Package of 10
Package of 10
7046, BNC Double Male
Package of 10
Package of 10
Package of 10
Package of 10
Package of 10
Useable on both VHF and UHF, but primary application is 440 to 450 MHz
F type RingCrimp connector for RG58 YES, that's correct... a type F connector for "RG58" 50 ohm coax, and similar size coax cable.
25 to the bag, $2.95 per bag.
F Series Connectors Features: Commercial Grade F Series Connectors Great for Coaxial Networks, cable,Video, Data and Telephony Applications Nickel Construction F Plug Crimp RG6 1/2" Barrel
F type RingCrimp connector for RG6 and similar size coax cable. 25 to the bag, $2.95 per bag.
F Series Connectors Features: Commercial Grade F Series Connectors Great for Coaxial Networks, cable,Video, Data and Telephony Applications Nickel Construction F Plug Crimp RG6 1/2" Barrel
F type Crimp-Seal connector for RG6 for 75 ohm coax, and similar coax cable. Has short barrel/shank as shown.
25 to the bag, $2.95 per bag.
F Series Connectors Features: Commercial Grade F Series Connectors Great for Coaxial Networks, cable,Video, Data and Telephony F Plug Crimp RG6 3/8" Barrel.
F-Type RG6 1/2" Long Barrel, F Connector 25 to the bag, $2.95 per bag. F Series Connectors Features: Commercial Grade F Series Connectors Great for Coaxial Networks, cable,Video, Data and Telephony Applications Nickel Construction F Plug Crimp RG6 1/2" Barrel
F-Type RG59 & RG6 1/2" Long Knurled, Barrel, twist-on F Connector 25 to the bag at $4.95 per bag.
F Series Connectors Features: Commercial Grade F Series Connectors Great for Coaxial Networks, cable,Video, Data and Telephony Applications Nickel Construction F Plug Crimp RG6 1/2" Barrel
F Connector, Chassis Mount Connector F Type Connectors- Chassis Mount with Nut & Washer A single-hole F socket. Priced; .99 each.
Package of 10
Package of 10
Package of 10
Package of 10
Package of 10
Package of 10
Package of 10
Package of 10
Package of 10
Package of 10
Package of 10
Package of 10
7438, TNC Male to BNC Female Adapter.
Package of 10
Package of 10
Package of 10
Gold flashed and plated, with teflon insulator, and gold plate centerpin.
Package of 10, Ideal for MIL SPEC VHF and UHF applications
Package of 10
Package of 10
Package of 10
7522, UHF MALE to RCA female adapter
7801B, SMA MALE to coax for RG8X,
RG59, and RG 6 etc.. 50 ohm coax.7801CX10, SMA MALE to coax. Ten, 7801C for RG174 Mini 50 ohm coax.
7824, N Female to SMA Male.
7825, TNC Male to SMA Male
Adapter.
7831, Mini UHF Male to SMA Female Adapter.
RMS power is 400 watts FSK and FM
Don t forget CoaxSeal, CS104.
RMS power is 400 watts FSK and FM
Don t forget CoaxSeal, CS104.
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 700 w SSB @ 2.5:1 VSWR
RMS power is 400 watts FSK and FM
Don t forget CoaxSeal, CS104.
806136, 80 thru 6 meter (multi-band) WINDOM Completely assembled. Includes 4:1, 1.2kw BALUN attached.
A = 41 strands,silver flashed, copper, with flex-PVC, non-metallic insulation.
B = 1.2 kw SSB BALUN made of UV resistant material
C = Center Insulator with BALUN suspension and hanger eyebolt.
D = Documentation and related files.
E = Center Eyebolt for suspension from tower or other support.
F = Heavy Duty, High-tensil strengh, End Insulators with non-flashover disc.
G = Ty-Tails included to attached end insulators to supports.
Learn more about this fabulous antenna at:
http://www.packetradio.com/windom.htm
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.2 kw SSB @ 2.5:1 VSWR
This antenna is completely wired, and turn-style tested.
Don t forget CoaxSeal, CS104.
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1000 watts SSB @ 2.5:1 VSWR
806136C, 80 thru 6 meter (multi-band) WINDOM Completely assembled. Includes 4:1, 1.2kw BALUN and 100 ft RG8X coax attached.
A = 41 strands,silver flashed, copper, with flex-PVC, non-metallic insulation.
B = 1.2 kw SSB BALUN made of UV resistant material
C = Center Insulator with BALUN suspension and hanger eyebolt.
D = Documentation and related files.
E = Center Eyebolt for suspension from tower or other support.
F = Heavy Duty, High-tensil strengh, End Insulators with non-flashover disc.
G = Ty-Tails included to attached end insulators to supports.
Learn more about this fabulous antenna at:
http://www.packetradio.com/windom.htm
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.2 kw SSB @ 2.5:1 VSWR
806136L, 80 thru 6 meter (multi-band) WINDOM Completely assembled. Includes 4:1, 1.2kw BALUN and 50 ft RG8X coax attached.
A = 41 strands,silver flashed, copper, with flex-PVC, non-metallic insulation.
B = 1.2 kw SSB BALUN made of UV resistant material
C = Center Insulator with BALUN suspension and hanger eyebolt.
D = Documentation and related files.
E = Center Eyebolt for suspension from tower or other support.
F = Heavy Duty, High-tensil strengh, End Insulators with non-flashover disc.
G = Ty-Tails included to attached end insulators to supports.
Learn more about this fabulous antenna at:
http://www.packetradio.com/windom.htm
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.2 kw SSB @ 2.5:1 VSWR
This antenna is completely wired, and turn-style tested.
Don t forget CoaxSeal, CS104.
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.5 kw SSB @ 2.5:1 VSWR
This antenna is completely wired, and turn-style tested.
Don t forget CoaxSeal, CS104.
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.5 kw SSB @ 2.5:1 VSWR
806137, 80 thru 6 meter (multi-band) WINDOM Completely assembled. Includes 6:1, 1.2kw BALUN attached.
A = 41 strands,silver flashed, copper, with flex-PVC, non-metallic insulation.
B = 1.2 kw SSB BALUN made of UV resistant material
C = Center Insulator with BALUN suspension and hanger eyebolt.
D = Documentation and related files.
E = Center Eyebolt for suspension from tower or other support.
F = Heavy Duty, High-tensil strengh, End Insulators with non-flashover disc.
G = Ty-Tails included to attached end insulators to supports.
Learn more about this fabulous antenna at:
http://www.packetradio.com/windom.htm
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.2 kw SSB @ 2.5:1 VSWR
This antenna is completely wired, and turn-style tested.
Don t forget CoaxSeal, CS104.
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.5 kw SSB @ 2.5:1 VSWR
This antenna is completely wired, and turn-style tested.
Don t forget CoaxSeal, CS104.
This antenna is completely wired, and turn-style tested.
Don t forget CoaxSeal, CS104.
THIS IS NOT A KIT. This antenna is assembled ready to connect your coax and erect. 1.5 kw SSB @ 2.5:1 VSWR
Useful when making data port and linear connections to many YAESU, ICOM, and Kenwood transceivers.
RG8X coaxial �jumper� cables.
If you add an antenna switch, or antenna tuner, you'll require a jumper to connect the accessory to the coax input of your radio. This is an important component of your antenna system. These are quality jumpers made of RG-8X with good flexibility andlow loss.The non-contaminating jacket in gray. This cable has an outside diameter of .25 (1/4") inch.
CAT No, A202 20 through 10 Meters Dipole HF antenna with end insulators. 36 ft
Don t forget to weatherproof with COAX SEAL CS104
CATNo. CS104
Order model A2321KD, Interface cable from multi-mode AEA controller PK 232 RAD 1 or 2, to YAESU 1000D with RCA jacks and 3.5mm (ring) main AF jack.
Order model A2321KMP, Interface cable from multi-mode AEA controller PK 232 RAD 1 or 2, to YAESU 1000 MP with RCA jacks and 3.5mm main AF jack.
ICOM HF VHF UHF Transceivers w 8 pin Screw On MIC & Ext Spkr jack. Icom transceivers with 8 pin screwOn mics.
ICOM HF, VHF,/UHF Transceivers w/8 pin Screw-On MIC & Ext Spkr jack. ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746, 756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics. Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751, . . MORE +
A232YRJ12 AEA PK232 to YAESU transceivers with RJ12 Mic I/O, and 3.5mm Ext Spkr receive AF jack.
PK 232 to Yaesu FT2800, FT1802, and Yaesu with RJ12 Microphone I/O. Model Number: A232YRJ12
Don t forget to weatherproof with COAX SEAL CS104
CATNo. CS104
Cat # ACCSW, Multi-Mode dual purpose switch.
This switch enables the operator to use the transceiver accessory jack, or microphone jack for two different device inputs. Devices include:
- RASCAL & TNC
- Two different TNC or KPC
- KAM, KAM+, KAM98, or KAMxl
- Microphone & RASCAL
- Microphone & TNC, KAM+, KAM98, or KAMxl
- Two different Microphones
- The applications are unlimited.
- Transmit Audio
- Receive Audio
- PTT, push-to-talk
- External Speaker jack (for use when using the 8 pin Mic I/O)
- Shield/Ground and include:
- RF By-Pass to prevent ingress noise.
- Additional cables available for hundreds of KPC, KAM's, Microphones, TNC, and other I/O devices.
See device cable listing elsewhere on this page.
Cables are regular 19.95, but when purchased at the same time as the ACCSW, they are 12.95 each, and ordered via Toll Free order line: 1 800 726 2919
Order three (3) cables, two for device port, and one for ACCSW to Radio Mic or Accessory jack, all three for 34.95. 1 800 726 2919.
Replacement microphone for ADI, ALINCO, Kenwood, and transceivers with 8 pin female screw-on mic connectors. MIC does not have Up-Dn buttons
Cat # ADI8M, All Cables, Connectors, Components, Case, Custom designed Printed Circuit board, PSK31 software, pictorial diagrams, schematics, software CD and setup instructions, are included with every ISO interface, kit.
There are no jumpers to joggle, no wall-wart or external power supplies. A CD with more than 50 Sound Card software packages to choose from. Freeware, Shareware, and Commercial software will enable you to enjoy the best of your PC sound card and the HAM Radio digital modes. This interface utilizes transformer coupling between the PC Sound Card line in/line out, and your transceiver. Automatic PTT is via serial comport and software control.ADI transceivers with 8 pin screw-on Microphone, and 3.5mm External Speaker jack.
This is a kit of unassembled parts; No Tech Support for kits !
Moving coil panel meters for use in electronic instruments, switchboards, vehicles,... With zero adjusting screw. Class 2.5.
Specifications
- range: 100mA
- dimensions: 2.4 x 1.9
Moving coil panel meters for use in electronic instruments, switchboards, vehicles,... With zero adjusting screw. Class 2.5.
Specifications
- range: 3A
- dimensions: 2.4 x 1.9
Moving coil panel meters for use in electronic instruments, switchboards, vehicles,... With zero adjusting screw. Class 2.5.
Specifications
- range: 30A
- dimensions: 2.4 x 1.9
Moving coil panel meters for use in electronic instruments, switchboards, vehicles,... With zero adjusting screw. Class 2.5.
Specifications
- range: 500mA
- dimensions: 2.4 x 1.9
Replacement microphone for ADI, ALINCO, Kenwood, and transceivers with 8 pin female screw-on mic connectors. MIC does not have Up-Dn buttons or keypad.
Cat # ALKW8M, All Cables, Connectors, Components, Case, Custom designed Printed Circuit board, PSK31 software, pictorial diagrams, schematics, software CD and setup instructions, are included with every ISO interface, kit.
There are no jumpers to joggle, no wall-wart or external power supplies. A CD with more than 50 Sound Card software packages to choose from. Freeware, Shareware, and Commercial software will enable you to enjoy the best of your PC sound card and the HAM Radio digital modes. This interface utilizes transformer coupling between the PC Sound Card line in/line out, and your transceiver. Automatic PTT is via serial comport and software control.ALINCO and KENWOOD HF, VHF, and UHF Transceivers which have 8 pin (screw-on) microphone connectors and 3.5mm external speaker jacks. PC Sound Card configured for PSK31 SSTV, MFSK and Packet modes. ALINCO models: DX-70, DX-77, ALD-24T, ALR-22HT, ALR-72T, DR-110, DR-112, DR-119, DR-1200, DR-430, DR-510, DR-590, DR-592, DR-600, DR-610 & more.
KENWOOD models: TM-201, TM-221, TM-231, TM-241, TM-2530, TM-401, TM-421, TM-431, TM-441, TM-531, TM-541, TM-621, TM-631, TM-701, TM-721, TM-731, TR-3200, TR-50, TS-50/S, TS-60, TS-751, TS-851, TS-140, TS-430, TS-440, TS-450, TS-660, TS-670, TS-680, TS-690, TS-701, TS-711, TS-780, TS-790, TS-811, TS-850, TS-870, TS-930, TS-940, TS-950, TW-4000, 4100, and others)
This is a kit of unassembled parts; No Tech Support for kits !
NMO hole mount with 17? RG-58U, PL- 259 Cable, and chrome plated brass.
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line: 800 726 2919
Cables are 12.95 each when purchased with the ACCSW switch box. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line: 800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line: 800 726 2919
Features
- DC and AC voltage measurements: up to 1000V
- DC current: 50?A to 0.25A
- resistance measurements
- two transistor tests: Iceo-test and hFE-measurements
- diode test: IR and IF measurements
- with dB-scale
Specifications
- DC voltage: 0.1/0.5/2.5/10/50/250/1000V
- basic accuracy: 3 at FSD
- input impedance: 20Kohm/V
- maximum input: 1000V
- AC voltage: 10/50/250/1000V
- basic accuracy: 4 at FSD
- input impedance: 9Kohm/V
- frequency range: +
- maximum input: 1000V
- DC current: 50?/2.5m/25m/0.25A
- basic accuracy: 3 at FSD
- overload protection: 1.5A
- resistance: x1/x10/x100/x1K/x10K
- basic accuracy: 3 at FSD
- overload protection: 1.5A
- continuity buzzer: -
- transistor test: hFE 0-1000 (with extra connector) / Iceo
- diode test: yes, If and Ir
- low battery sign: no
- maximum display: analog
- ranging mode: manual
- data hold: no
- backlight: no
- dimensions: 5.8" x 3.9" x 1.4"
- weight (with battery): ? 9.9oz.
- power supply: 9V battery
- packing: box
- accessories: manual / test leads / battery
- auto power-off: no
![]("/catalog/images/products/avm360.jpg")
Features
- 3-color scale display
- voltage (AC & DC) measurements: up to 500V
- resistance measurements: with ohm adjusting knob
- battery-check function
- fuse and diode protection
- 1 X AA-battery included
- comes with protection holster
- packaging: blister
Specifications
- DC voltage: 2.5/10/50/250/500V
- basic accuracy: ? 5%
- input impedance: -
- maximum input: 500V
- AC voltage: 10/50/500V
- basic accuracy: ? 5%
- input impedance: -
- frequency range: -
- maximum input: 500V
- DC current: 500?/10m/250mA
- basic accuracy: ? 5%
- overload protection: -
- resistance: x1/x10
- basic accuracy: ? 5%
- overload protection: -
- continuity buzzer: -
- transistor test: -
- diode test: -
- low battery sign: no
- maximum display: analog
- ranging mode: manual
- data hold: no
- backlight: no
- dimensions: 4.7" x 2.4" x 1.2"
- weight (with battery): ? 4.4oz.
- power supply: 1.5V AA battery
- packing: blister
- accessories: manual / test leads / battery
- auto power-off: no
Cat # AZDEN8M, All Cables, Connectors, Components, Case, Custom designed Printed Circuit board, PSK31 software, pictorial diagrams, schematics, software CD and setup instructions, are included with every ISO interface, kit.
There are no jumpers to joggle, no wall-wart or external power supplies. A CD with more than 50 Sound Card software packages to choose from. Freeware, Shareware, and Commercial software will enable you to enjoy the best of your PC sound card and the HAM Radio digital modes. This interface utilizes transformer coupling between the PC Sound Card line in/line out, and your transceiver. Automatic PTT is via serial comport and software control.RASCAL 1-AZ is used with the AZDEN VHF, and UHF Transceivers which have 8 pin (screw-on) microphone and 3.5mm external speaker jacks. PC Sound Card configured for PSK31 SSTV, MFSK and Packet modes. AZDEN models: PCS-5000, PCS-6000, PCS-7000
This is a kit of unassembled parts; No Tech Support for kits !
CAT No, 10 Meter, Double Bazooka Antenna
Although the Double Bazooka is a Single-Band antenna, it has an extremely High-Performance record. In addition, it has a wide bandwidth across the band it is designed for. This antenna comes complete, with heavy-duty insulators installed, center UV support block Pack of CoaxSeal (CS 104) is included All you have to do is connect your coax, and suspend at least 25 feet above ground. The last two digits of the model number indicate its bandof operation. 10 Meter version requires 17 feet of back-yard space.CAT No, 15 Meter, Double Bazooka Antenna
Although the Double Bazooka is a Single-Band antenna, it has an extremely High-Performance record. In addition, it has a wide bandwidth across the band it is designed for. This antenna comes complete, with heavy-duty insulators installed, center UV support block Pack of CoaxSeal (CS 104) is included All you have to do is connect your coax, and suspend at least 25 feet above ground. The last two digits of the model number indicate its bandof operation. 15 Meter version requires 22 feet of back-yard space.CAT No, BAZUKA40 40 Meter, Double Bazooka Antenna
40 Meter, Double Bazooka Antenna Although the Double Bazooka is a Single-Band antenna, it has an extremely High-Performance record. In addition, it has a wide bandwidth across the band it is designed for. This antenna comes complete, with heavy-duty insulators installed, center UV support block Pack of CoaxSeal (CS 104) is included All you have to do is connect your coax, and suspend at least 25 feet above ground. The last two digits of the model number indicate its band of operation. 40 Meter version requires 65 feet of back-yard space.CAT No, BAZUKA75 Double Bazooka Antenna
75 Meter, Double Bazooka Antenna Although the Double Bazooka is a Single-Band antenna, it has an extremely High-Performance record. In addition, it has a wide bandwidth across the band it is designed for. This antenna come complete, with heavy-duty insulators installed, center UV block. A package of CS 104 CoaxSeal is included. All you have to do is connect your coax, and hang it at least 25 feet above ground.The last two digits of the model number indicate its band of operation Back yard space required is 120 feet.
Our HF Mobile antennas are designed for maximum efficiency, low SWR, and optimum bandwidth. They are conservitivly rated at 250 watts. They are constructed to withstand mobile abuse and use.
Our BUXCOMM HF STIX antennas consist of a four (4) ft fiberglass lower section with the integreated loading coil. The top portion of our mobile HF antenna has an adjustable 4 ft stainless steel whip. This steel whip section can be removed with the capture ferrule set and in tact, without changing the VSWR when it is reattached.
Our HF Mobile antennas are designed for maximum efficiency, low SWR, and optimum bandwidth. They are conservitivly rated at 250 watts. They are constructed to withstand mobile abuse and use.
Our BUXCOMM HF STIX antennas consist of a four (4) ft fiberglass lower section with the integreated loading coil. The top portion of our mobile HF antenna has an adjustable 4 ft stainless steel whip. This steel whip section can be removed with the capture ferrule set and in tact, without changing the VSWR when it is reattached.
Our HF Mobile antennas are designed for maximum efficiency, low SWR, and optimum bandwidth. They are conservitivly rated at 250 watts. They are constructed to withstand mobile abuse and use.
Our BUXCOMM HF STIX antennas consist of a four (4) ft fiberglass lower section with the integreated loading coil. The top portion of our mobile HF antenna has an adjustable 4 ft stainless steel whip. This steel whip section can be removed with the capture ferrule set and in tact, and without changing the VSWR when it is reattached.
Our HF Mobile antennas are designed for maximum efficiency, low SWR, and optimum bandwidth. They are conservitivly rated at 250 watts. They are constructed to withstand mobile abuse and use.
Our BUXCOMM HF STIX antennas consist of a four (4) ft fiberglass lower section with the integreated loading coil. The top portion of our mobile HF antenna has an adjustable 4 ft stainless steel whip. This steel whip section can be removed with the capture ferrule set and in tact, and without changing the VSWR when it is reattached.
Our HF Mobile antennas are designed for maximum efficiency, low SWR, and optimum bandwidth. They are conservitivly rated at 250 watts. They are constructed to withstand mobile abuse and use.
Our BUXCOMM HF STIX antennas consist of a four (4) ft fiberglass lower section with the integreated loading coil. The top portion of our mobile HF antenna has an adjustable 4 ft stainless steel whip. This steel whip section can be removed with the capture ferrule set and in tact, and without changing the VSWR when it is reattached.
Our HF Mobile antennas are designed for maximum efficiency, low SWR, and optimum bandwidth. They are conservitivly rated at 250 watts. They are constructed to withstand mobile abuse and use.
Our BUXCOMM HF STIX antennas consist of a three ft fiberglass lower section with the integreated loading coil. The top portion of our mobile HF antenna has an adjustable 3 ft stainless steel whip. This steel whip section can be removed with the capture ferrule set and in tact, and without changing the VSWR when it is reattached.
Our HF Mobile antennas are designed for maximum efficiency, low SWR, and optimum bandwidth. They are conservitivly rated at 250 watts. They are constructed to withstand mobile abuse and use.
Our BUXCOMM HF STIX antennas consist of a four (4) ft fiberglass lower section with the integreated loading coil. The top portion of our mobile HF antenna has an adjustable 4 ft stainless steel whip. This steel whip section can be removed with the capture ferrule set and in tact, and without changing the VSWR when it is reattached.
Specifications
- Composition of material = No. 43 ferrite
- 43 material is optimum for 2 through 30 Mhz.
- This is the smaller binaculars for T1 and T2.
See also, Cat No. EE1419R High Temperture Teflon coated silver plated wire used to wind HF transformers, T1, T2, T3. See June 2006 issue QST, page 41, building a 600 watt RF Power amplifier
Specifications
Composition of material = No. 31 ferrite
31 material is optimum through 300 Mhz.
See also, Cat No. EE1419R High Temperture Teflon coated silver plated wire used to wind HF (T3) transformer and BALUNS. See June 2006 issue QST, page 41, building a 600 watt RF Power amplifier.
Order Code: BITU20
Specifications
- tip: 0.04"
Stock Info
- In Stock
- BITU20, SPARE TIP FOR VTS20U Soldering Iron
- Packaging: ClrPak
BUXCOMM MasterMatch BALUN's, are the choice of HAM operator's around the world.
Dont forget CAT No. CS104:
CAT No. CS104In few cases, BALUN colors or design appearance may vary from thoes shown.
BLACK & RED Power Cable
is available in AWG: 14 (41 strands copper), 12 (65 strands copper), and 10 (105 strands copper) gauges, stranded wire. This wire has a high-tensile strength to deliver the most current with the least voltage drop between power supply connections and your DC equipment. Constructed with multiple strands of copper wire, to provide the most flexibility of any high-current red and black cables. The oil resistant jacket makes these cables ideal for the most hostile mobile and base conditions. The power cable shown here is also ideal in the RV environment.
Dacron Rope, BLACK, UV resistant. Application is to Guy vertical antennas, or pull flat-top wire antennas taunt. 5/16 inch diameter. This Dacron Rope, has a high-tensile, 2200+ lb pull strength.
Don t forget CoaxSeal, CS104.
Dacron Rope, BLACK, UV resistant. Application is to Guy vertical antennas, or pull flat-top wire antennas taunt. 5/16 inch diameter. This Dacron Rope, has a high-tensile, 2200+ lb pull strength.
BLACK, UV resistant. Guy vertical antennas, etc, 5/16 inch diameter Dacron Rope, 2200+ lb pull.
Dacron Rope, BLACK, UV resistant. Application is to Guy vertical antennas, or pull flat-top wire antennas taunt. 5/16 inch diameter. This Dacron Rope, has a high-tensile, 2200+ lb pull strength.
BLACK, UV resistant. Guy vertical antennas, etc, 5/16 inch diameter Dacron Rope, 2200+ lb pull.
Dacron Rope, BLACK, UV resistant. Application is to Guy vertical antennas, or pull flat-top wire antennas taunt. 5/16 inch diameter. This Dacron Rope, has a high-tensile, 2200+ lb pull strength.
Dont forget CAT No. CS104:
CAT No. CS104
Dont forget CAT No. CS104:
CAT No. CS104 
Dont forget CAT No. CS104:
CAT No. CS104 BUZAKA160 160 Meter, Double Bazooka Antenna
Although the Double Bazooka is a Single-Band antenna, it has an extremely High-Performance record. In addition, it has a wide bandwidth across the band it is designed for. This antenna comes complete, with heavy-duty insulators installed, center UV support block Pack of CoaxSeal (CS 104) is included All you have to do is connect your coax, and suspend at least 25 feet above ground. The last two digits of the model number indicate its band of operation. 160 Meter version requires 242 feet of RealEstate.
1/8 Inline STEREO JACK WITH STRAIN RELIEF, BLACK
Specifications
- type: stereo
- boot in molded plastic
- for cable: ? 0.16
- solder connections
Order Code: CA019
Specifications
- type: mono
- solder connections
- boot in molded plastic
- for cable: ? 0.24
Specifications
- type: stereo
- solder connections
- boot in molded plastic
- for cable: ? 0.24
Specifications
- pick-up element: 1/4 B/W CMOS
- number of pixels: 352 x 288
- scanning system: CCIR (PAL)
- resolution: 380 TV lines
- min. illumination: 0.3Lux / F1.4
- S/N ratio: >48dB
- electronic shutter: 1/50 to 1/15000 sec
- gamma correction: 1.0
- automatic adjustments:
- exposure
- gain
- gamma correction
- standard board lens: f3.6mm
- viewing angle: 92?
- video output: 1.0Vpp composite, 75 ohm (yellow connector)
- audio output: RCA connector
- power supply: 8Vdc / 80mA (regulated, power adapter incl.)
- operating temperature: -10?C ~ 45?C
- storage temperature: -30?C ~ 60?C
- dimensions: 42 x 38 x 28mm
- weight: 60g
- cable length: ? 25cm
For use with your dipoles, Windom, and similar off-center fed antennas here is the trio that saves you time, and lasts for years of use and weather abuse. This center and end insulator trio set are designed for strength, and are great for Windom, off-center fed antennas, dipoles, Vees, zepps and all
SWL antennas.
BUXCOMM MasterMatch Products & BALUN's, are the choice of HAM operator's around the world.
The BUXCOMM Heavy Duty Center Insulator and
end-insulators are built with RF insulating material. Internal connections are silver soldered for long-term durability.
CAT No, CX201, High Quality 2 position Coax Switch
Features: Coaxial Antenna Switch Box
Professional Design
1 Input
2 Outputs
Rotary Switch
SO-239 Connectors
1000 Watt Power Rating
Up to 600 MHz
CX201N Two way Coax Switch (TYPE N)
* Two way coax switch
* Connectors 2 x Type N
* Power 2kW SSB, 1 KW RMS/CW
* Range DC - 500MHz
* Impedance 50 Ohms
* Loss 0.1dB
2-way coax switch ideal for use in HF, VHF, & UHF antenna systems and service/test work stations. This switch provides a solid contact method of switching between two coax systems and provides low loss.
10 Meter
Power rated at 350 watts SSB/pep RMS/FSK & AM @ 250 watts. Comes Complete with Double Antenna Bracket, two elements for selected band, all hardware, and BALUN (as shown)
Dont forget CAT No. CS104:
CAT No. CS104 15 Meter
<Power rated at 350 watts SSB/pep RMS/FSK & AM @ 250 watts. Comes Complete with Double Antenna Bracket, two elements for selected band, all hardware, and BALUN (as shown)
Dont forget CAT No. CS104:
CAT No. CS104 17 Meter
Power rated at 350 watts SSB/pep RMS/FSK & AM @ 250 watts. Comes Complete with Double Antenna Bracket, two elements for selected band, all hardware, and BALUN (as shown)
Dont forget CAT No. CS104:
CAT No. CS104 20 Meter
Power rated at 350 watts SSB/pep RMS/FSK & AM @ 250 watts. Comes Complete with Double Antenna Bracket, two elements for selected band, all hardware, and BALUN (as shown)
Dont forget CAT No. CS104:
CAT No. CS104 40 Meter
Power rated at 350 watts SSB/pep RMS/FSK & AM @ 250 watts. Comes Complete with Double Antenna Bracket, two elements for selected band, all hardware, and BALUN (as shown)
Dont forget CAT No. CS104:
CAT No. CS104 6 Meter
Power rated at 350 watts SSB/pep RMS/FSK & AM @ 250 watts. Comes Complete with Double Antenna Bracket, two elements for selected band, all hardware, and BALUN (as shown)
Dont forget CAT No. CS104:
CAT No. CS104 75 Meter
Power rated at 350 watts SSB/pep RMS/FSK & AM @ 250 watts. 
Dont forget CAT No. CS104:
CAT No. CS104
Dont forget CAT No. CS104:
CAT No. CS104
Dont forget CAT No. CS104:
CAT No. CS104
Dont forget CAT No. CS104:
CAT No. CS104
Dont forget CAT No. CS104:
CAT No. CS104
Dont forget CAT No. CS104:
CAT No. CS104
Dont forget CAT No. CS104:
CAT No. CS104
Dont forget CAT No. CS104:
CAT No. CS104 
Dual Band Magnet Mount Antenna. Transmit and Receive on both VHF and UHF Supplied with coax and PL259 attached.
Dual Band, 144-165 MHz & 440-470 MHz Magnet Mount, Antenna With standard 3/8in X 24 thread base. Pre-wired with 14 ft of RG-58. with PL259 attached.
Features
- digital clamp meter
- 3 1/2 LCD display with automatic polarity indication
- data-hold function
- AC current measurements: max. 1000A
- insulation test: max. 2000Mohm
- voltage measurements: AC (max. 750V) and DC (max. 1000V)
- resistance measurements: max. 20Kohm
- with carrying bag
Specifications
- DC voltage: 1000V
- basic accuracy: ? 0.8%
- input impedance: > 9Mohm
- maximum input: 1000V
- AC voltage: 750V
- basic accuracy: ?1.0%
- input impedance: > 9Mohm
- frequency range: -
- maximum input: 750V
- DC current: -
- basic accuracy: -
- overload protection: -
- AC current: 200/1000A
- basic accuracy: ?2.0%
- overload protection: 1200A for 60 seconds
- resistance: 200/20k (insulation test : 20M/2000M)
- basic accuracy: ?1.0% (?2.0% for insulation test)
- overload protection: 500V
- capacitance: -
- accuracy: -
- inductance: -
- accuracy: -
- frequency: -
- basic accuracy: -
- overload protection: -
- temperature: -
- basic accuracy: -
- overrange: yes ŕ"
- continuity buzzer: yes
- transistor test: -
- diode test: -
- low-battery indication: yes "BAT"
- maximum display: 3 1/2
- LCD display size: -
- ranging mode: manual
- data hold: yes
- backlight: no
- dimensions: 9.1" x 1.5" x 3.5"
- weight (with battery): ? 11.3oz
- power supply: 9V battery
- packaging: -
- accessories: manual / test leads / battery / carrying bag
- auto power-off: no
DM433 Power Hand-Microphone,
(1.5V AA battery included) wired for 4 pin Screw-On mics on Cobra and Uniden radios.We custom wire these power microphones for other radios. CUSTOM wiring is additional $15.00.
Speaker-Mic for most handheld transceivers with 3.5mm and 2.5mm jacks. Standard spacing for all handhelds with 2.5mmand 3.5mm jacks.
Cat # DRAKE4M, All Cables, Connectors, Components, Case, Custom designed Printed Circuit board, PSK31 software, pictorial diagrams, schematics, software CD and setup instructions, are included with every ISO interface, kit.
There are no jumpers to joggle, no wall-wart or external power supplies. A CD with more than 50 Sound Card software packages to choose from. Freeware, Shareware, and Commercial software will enable you to enjoy the best of your PC sound card and the HAM Radio digital modes. This interface utilizes transformer coupling between the PC Sound Card line in/line out, and your transceiver. Automatic PTT is via serial comport and software control.The DRAKE TR7 . The TR-7 or TR-7/A, uses the standard 4 pin screw on female mic connector. The PTT circuit shown in this diagram enables software calls to RTS signal of an unused serial comport. DRAKE models: TR-22, TR-33, TR-7, UV-3
This is a kit of unassembled parts; No Tech Support for kits !
Features
- automatic polarity indication
- fits into your pocket
- DC and AC voltage measurements: up to 500V
- DC current: max. 200mA
- resistance measurements: up to 2Mohm
- diode and continuity test
Specifications
- DC voltage: 2/20/200/500V
- basic accuracy: ?0.5%
- input impedance: -
- maximum input: 500V
- AC voltage: 200/500V
- basic accuracy: ?1.2%
- input impedance: -
- frequency range: 45 to 1000Hz
- maximum input: 500Vrms
- DC current: 200mA
- basic accuracy: ?2.0%
- overload protection: 200mA
- AC current: -
- basic accuracy: -
- overload protection: -
- resistance: 2k/20k/200k/2000k
- basic accuracy: ?1.0%
- overload protection: 250Vrms
- capacitance: -
- accuracy: -
- inductance: -
- accuracy: -
- frequency: -
- basic accuracy: -
- overload protection: -
- temperature: -
- basic accuracy: -
- overrange: yes ŕ"
- continuity buzzer: yes
- transistor test: no
- diode test: yes
- low-battery indication: yes
- maximum display: 1999
- LCD display size: 1.4" x 0.6"
- ranging mode: manual
- data hold: no
- backlight: no
- dimensions: 2.8" x 4.7" x 0.8"
- weight (with battery): ? 3.4oz.
- power supply: 12V battery
- packing: box
- accessories: manual / test leads / battery / cover
- auto power-off: no
Features
- automatic polarity indication
- voltage measurements: AC 500V and DC 500V max.
- current measurements: DC 10A max.
- resistance measurements: 2Mohm
- diode and transistor (hFE) test
- packaging: blister
Specifications
- DC voltage: 200m/2000m/20/200/500V
- basic accuracy: ?0.5% (?0.25% for 200mV range)
- input impedance: -
- maximum input: 500V
- AC voltage: 200/500V
- basic accuracy: ?1.2%
- input impedance: -
- frequency range: 45-450Hz
- maximum input: 500V
- DC current: 200?/2000?/20m/200m/10A
- basic accuracy: ?1.0% (?2.0% for 10A range)
- overload protection: 200mA 250V fuse (10A-range is not fuse-protected)
- AC current: -
- basic accuracy: -
- overload protection: -
- resistance: 200/2000/20k/200k/2000k
- basic accuracy: ?0.8% (?1.0% for 2000k range)
- overload protection: 220Vrms max. for 15 seconds
- capacitance: -
- accuracy: -
- inductance: -
- accuracy: -
- frequency: -
- basic accuracy: -
- overload protection: -
- temperature: -
- basic accuracy: -
- overrange: yes
- continuity buzzer: -
- transistor test: yes
- diode test: yes
- low-battery indication: yes
- maximum display: 3 1/2
- LCD display size: 0.5"
- ranging mode: manual
- data hold: no
- backlight: no
- dimensions: -
- weight (with battery): -
- power supply: 12V battery
- packing: -
- accessories: manual / test leads / 1 GP23GA 12V battery
- auto power-off: no
Features
- DMM with automatic polarity function and 3 ? digit LCD display
- measurements: DC current up to 10A, AC and DC voltage up to 600V, resistance up to 2Mohm
- diode, transistor and continuity test with buzzer
- data-hold function and backlight
- with protection holster
Specifications
- DC voltage: 200m/2/20/200/1000V
- basic accuracy: -
- input impedance: -
- maximum input: 600V
- AC voltage: 200/600
- basic accuracy: -
- input impedance: -
- frequency range: -
- maximum input: 600V
- DC current: 200?/2m/20m/200m/10A
- basic accuracy: -
- overload protection: 10A
- AC current: -
- basic accuracy: -
- overload protection: -
- resistance: 200/2k/20k/200k/2M
- basic accuracy: -
- overload protection: -
- capacitance: -
- accuracy: -
- inductance: -
- accuracy: -
- frequency: -
- basic accuracy: -
- overload protection: -
- temperature: -
- basic accuracy: -
- overrange: yes ŕ"
- continuity buzzer: yes
- transistor test: yes
- diode test: yes
- low-battery indication: -
- maximum display: 1999
- LCD display size: 1.8" x 0.7"
- ranging mode: manual
- data hold: yes
- backlight: yes
- dimensions: 2.7" x 5.4" x 1.2"
- weight (with battery): -
- power supply: 1 9V 6LR61 battery (incl.)
- packing: -
- accessories: -
- auto power-off: no
25 feet, Cat No. EE1611B, This is the wire used to wind HF (T3) transformer and BALUNS. See June 2006 issue of QST, page 41, 600 watt RF Power amplifier
Specifications
- Conductor Size (AWG) 16
- Conductor Silver-Plated Copper
- Voltage rating - volts 1,000
- Temperature rating ?C -55 to 200?C
- Number of Stranded Wires 11 strands size awg 27
- Insulation EE (Teflon)
- Diameter - inches (mm) .125 (3.18)
- BLACK Jacket Dia - inches (mm) .147 (3.73)
15 feet, Cat No. EE1611R, This is the wire used to wind HF (T3) transformer and BALUNS. See June 2006 issue of QST, page 41, 600 watt RF Power amplifier
Specifications
- Conductor Size (AWG) 16
- Conductor Silver-Plated Copper
- Voltage rating - volts 1,000
- Temperature rating ?C -55 to 200?C
- Number of Stranded Wires 11 strands size awg 27
- Insulation EE (Teflon)
- Diameter - inches (mm) .125 (3.18)
- Jacket Dia - inches (mm) .147 (3.73)
BUXCOMM Price: 149.95
FEATURES: 50 Watts of Power Output
The FT-1802M provides a hefty 50 Watts of power output, with "power" settings of: 50, 25, 10, and 5 Watts.
Extended Receiver Coverage; The FT-1802M provides receiver coverage of 136-174 MHz, so you can listen in on a wide variety of commercial, military, public safety, and marine communications.
The supplied MH-48a6j DTMF Microphone is illuminated for eas of nighttime use, and you may enter operating frequencies directly from the keypad. What's more, memory channels may also be recalled directly via the keypad.
The FT-1802M's extensive memory system includes 200 regular memories, ten pairs of band-limit memories, and a one-touch "Home" channel. Memory channels store repeater offset information, as well as CTCSS or DCS data, and can have a six-character label appended, for quick channel recognition. And the memories may be allocated into as many as eight memory banks, for more efficient scanning.
Dedicated 10-channel NOAA Weather Broadcast Channel Bank (U.S. version)
Included in the FT-1802M is a dedicated, quick-access memory bank that contains the ten standard NOAA Weather Information Channels, so you can keep track of weather conditions expected for your area.
Four user-programmable "soft" keys are provided on the MH-48a6j microphone, allowing you to bring often-used Menu items, or front panel key functions, to your fingertips.
The FT-1802M includes both CTCSS and DCS Encoder/Decoder circuitry, with Reverse CTCSS Decoding also available, to mute your receiver when a particular tone is received (instead of opening your squelch). And you can encode CTCSS and decode DCS, or vice versa, too, if your application requires it.
Adjustable Mic Gain and Wide/Narrow Deviation and RX Bandwidth The microphone gain for the FT-1802M's transmitter is adjustable, so you can optimize it for your voice level as well as background noise in your operating location. And for operation in crowded channel environments, the TX deviation and RX bandwidth may both be reduced via the Menu.
Automatic Repeater Shift (ARS), Automatic Power-Off (APO), and BCLO (Busy Channel Lock-Out) ARS: Automatically selects the typical repeater shift used in your country, based on the current operating frequency. APO: Automatically turns power off after a user-defined time period, to prevent you from running down your car battery if you forget to turn your rig off. BCLO: Prevents you from transmitting on an occupied frequency (especially valuable during Tone Squelch or DCS operation).
You can practice your Morse Code recognition, using this novel trainer that sends you five-character code groups, with variable speed and instant feedback as to the correct characters sent to you.
Security Password to Prevent Unauthorized Use A defeatable (by the owner) Security Password system is provided for the FT-1802M, so you can limit operational access to yourself and any other users (if any) informed of the password for the transceiver.
Easy Access to YAESU's Renowned WiRES-II� Internet Linking Nodes
CAT No, FTSW90, Free your hands with this Foot Switch
Use to control PTT and transmit status when using custom microphone installations that do not have PTT buttons.MOMENTARY contact, makes contact as long as the foot switch is depressed.
Complete G5RV antenna All connections are made, insulators, and BALUNs, installed, ready to connect your coax and erect.
Includes BUXCOMM MM11 BALUN.Broad-Band design enables transmit and receive coverage for 80, 40, 20, 10, & 6 meters. and most WARC bands in between.
HDM1SS Moulded Antenna Mount
Extra heavy-duty moulded APEX mount with 3/8in. x 24 thread connection on top and UHF (SO239) female connection on the bottom.
Mounts into 3/4 inch hole with shoulder insulator. Main stud is a 5/8 inch steel bolt designed to withstand the abuse of large springs and long whip antennas.
RED & BLACK, # 8 wire, with large AGU fuse-holders installed in each lead. Thirty (30) ampere fuses included, installed in each fuse holder.
TP8B is 14 feet long Heavy duty, number 8 stranded copper wire, with Polarized Quick Disconnect Features:
8 AWG Wire, 2-Pin Positive Grip, 14ft Long, (2) DualFuse Holders, 30 Amp Fuses installed.
CAT No, HIQ6AB Ultra low loss 98 percent shield. Belden clear RG8X, fitted with Amphenol PL 259s at each end.
High quality six 6 ft coax jumper, perfect for transceiver to tuner or transceiver to Linear interconnect. [HIQ6AB]
ICOM HF VHF UHF Transceivers w 8 pin Screw On MIC & Ext Spkr jack. Icom transceivers with 8 pin screwOn mics.
ICOM HF, VHF,/UHF Transceivers w/8 pin Screw-On MIC & Ext Spkr jack. ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746, 756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics. Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751, . . MORE +
ICOM HF VHF UHF Transceivers w 8 pin Screw On MIC & Ext Spkr jack. Icom transceivers with 8 pin screwOn mics.
ICOM HF, VHF,/UHF Transceivers w/8 pin Screw-On MIC & Ext Spkr jack. ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746, 756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics. Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751, . . MORE +
ICOM HF VHF UHF Transceivers w 8 pin Screw On MIC & Ext Spkr jack. Icom transceivers with 8 pin screwOn mics.
ICOM HF, VHF,/UHF Transceivers w/8 pin Screw-On MIC & Ext Spkr jack. ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746, 756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics. Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751, . . MORE +
Cat # ICOM4M, All Cables, Connectors, Components, Case, Custom designed Printed Circuit board, PSK31 software, pictorial diagrams, schematics, software CD and setup instructions, are included with every ISO interface, kit.
There are no jumpers to joggle, no wall-wart or external power supplies. A CD with more than 50 Sound Card software packages to choose from. Freeware, Shareware, and Commercial software will enable you to enjoy the best of your PC sound card and the HAM Radio digital modes. This interface utilizes transformer coupling between the PC Sound Card line in/line out, and your transceiver. Automatic PTT is via serial comport and software control.ICOM HF-VHF Transceivers with 4 pin screw-type microphone connector to PC Sound Card configured for PSK31, and other digital modes. NOTE notice that this interface utilizes transformer coupling and enables PTT execution via serial comport RTS signal. ICOM models IC-202, IC-215, IC-22S, IC-245, IC-280, IC-402, IC-502, etc...
This is a kit of unassembled parts; No Tech Support for kits !
Cat # ICOM8M, All Cables, Connectors, Components, Case, Custom designed Printed Circuit board, PSK31 software, pictorial diagrams, schematics, software CD and setup instructions, are included with every ISO interface, kit.
There are no jumpers to joggle, no wall-wart or external power supplies. A CD with more than 50 Sound Card software packages to choose from. Freeware, Shareware, and Commercial software will enable you to enjoy the best of your PC sound card and the HAM Radio digital modes. This interface utilizes transformer coupling between the PC Sound Card line in/line out, and your transceiver. Automatic PTT is via serial comport and software control.ICOM HF-VHF Transceivers with 8 pin screw-on, standard microphone connector to PC Sound Card configured for PSK31, and other digital modes. Notice this interface utilizes transformer coupling and enables PTT execution via serial comport RTS signal. Some ICOM transceivers employ a bias voltage as a phantom EMF on the mic "hot" wire, to provide power for some models that use amplified microphones. To circumvent any DC ground returns via the isolation transformer, I've incorporated a coupling capacitor in all RASCAL interfaces. ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, IC-718, IC-490, IC-505, IC-551, IC-560, IC-575, IC-707, IC-735, IC-737, IC-740, IC-745, IC-751, IC-761, IC-765, IC-781, IC-901, etc...
This is a kit of unassembled parts; No Tech Support for kits !
Two Isolators, one for sound card LINE IN, and one for sound card LINE OUT.
Ten PCB for $ 9.00
Ten Pcs
JPOLE2 Direct fed 144-150 MHz J Pole rugged construction to withstand heavy Ice Loads. More gain than a ground plane.
2 meters, 144 to 150 mHz., model JPOL2VBALUN not included.
JPOLE4 Direct fed 430-450 MHz J Pole rugged construction to withstand heavy Ice Loads. More gain than a ground plane.
70 Centimeters, 430 to 450 mHz., model JPOL4VBALUN not included.
J Pole for 144 to 150 mHz (2 meters)
Has more gain than a ground plane, and built to withstand harse invironments.At an unbeleivable price that you can afford. This J Pole Antenna is made of high quality materials that are built to last. This J Pole comes complete as shown, including all hardware and sidemount support boom, with U-bolt and UV resistant tye-wraps to secure coaxial cable. Rugged Construction designed to last for years, these J-POL s are made in the USA by BUXCOMM corp.
With all mounting hardware, U-bolts, connectors, and color photo documantation/instructions.
J Pole maximum power rating: 300 watts
During this SALE, The VBALUN is included FREE with this J Pole to enable maximum transfer of RF energy.
Built Rugged, Built to last.
Regular price is $49.95,
Now until December 26, SALE Price is 39.95. Sale Price includes FREE V-BALUN, for maximum transfer of RF to JPOLEV3.
J Pole for 430 to 450 mHz (70 centimeters)
Has more gain than a ground plane, and built to withstand harse invironments.At an unbeleivable price that you can afford. This J Pole Antenna is made of high quality materials that are built to last. This J Pole comes complete as shown, including all hardware and sidemount support boom, with U-bolt and UV resistant tye-wraps to secure coaxial cable. Rugged Construction designed to last for years, these J-POL s are made in the USA by BUXCOMM corp.
With all mounting hardware, U-bolts, connectors, and color photo documantation/instructions.
J Pole maximum power rating: 300 watts
During our Holiday SALE, The VBALUN is included FREE with this J Pole, for maximum transfer of RF energy.
CAT No, KC259, A must-have PL259 Push-On connector for service benches, and qwik-connect and rapid change PL259 to SO239 ports.
KH8DKW13RY, KAM & KAM Plus to Kenwood transceivers with 13 pin DIN Accy2 Jack.
Includes TS 2000.
KH8Y8M, for Yaesu 8 pin mic jack to KAM HF port, receive audio is from 3.5mm Ext Spkr jack.
Ft 840, FT 757, FT 767, and any Yaesu with 8 pin Screw On Microphone connector.6 ft Yaesu 8 pin mic jack to KAM HF port, receive audio is from 3.5mm Ext Spkr jack
KHVI13ARC, KAM and KAM Plus HF and VHF dual-port switch to ICOM 13 pin ACCY jack.
Switch has two (2) Ferrite cores to reduce noise and hum ingress. Capacitive coupling is used to isolate HF and VHF receive I/O.Wired connectors that include AFSK (packet..etc) FSK/RTTY, and CW.
CW plug is .25 inch (1/4 inch) to accommodate Icom CW jacks.
Icoms:
IC-706
IC-706 MK IIG
IC-703
IC-718
IC07000
and ICOM late model transceivers with 13 pin DIN accessory jacks.
ICOM HF VHF UHF Transceivers w 8 pin Screw On MIC & Ext Spkr jack. Icom transceivers with 8 pin screwOn mics.
ICOM HF, VHF,/UHF Transceivers w/8 pin Screw-On MIC & Ext Spkr jack. ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746, 756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics. Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751, . . MORE +
ICOM HF VHF UHF Transceivers w 8 pin Screw On MIC & Ext Spkr jack. Icom transceivers with 8 pin screwOn mics.
ICOM HF, VHF,/UHF Transceivers w/8 pin Screw-On MIC & Ext Spkr jack. ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746, 756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics. Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751, . . MORE +
KVKW4013 Kenwood with 13 pin DIN, accessory jack to KAM or KPC 1200 b-s VHF port Dsub 9
For use with older model Kenwood transceivers (TS 940, TS 440, etc)
Special applications diode installed to mute microphone during transmit.
Model Number: KVKW4013
- KPC3,
- KAM,
- KAM+,
- KAM98,
- KAMxL,
- KPC9612 (1200b/s port)
- Cable length is 6 ft
No-Features, Microphone only, no Up/Down or keypad buttons.
Cat # KW4M, All Cables, Connectors, Components, Case, Custom designed Printed Circuit board, PSK31 software, pictorial diagrams, schematics, software CD and setup instructions, are included with every ISO interface, kit.
There are no jumpers to joggle, no wall-wart or external power supplies. A CD with more than 50 Sound Card software packages to choose from. Freeware, Shareware, and Commercial software will enable you to enjoy the best of your PC sound card and the HAM Radio digital modes. This interface utilizes transformer coupling between the PC Sound Card line in/line out, and your transceiver. Automatic PTT is via serial comport and software control.KENWOOD HF Transceivers with 4 pin microphone connectors, to PC Sound Card. This interface utilizes transformer coupling between the PC Sound Card line in/line out, and your transceiver. Automatic PTT is via serial comport and software control. (KENWOOD Models: TS-120, TS-130, TS-180, TS-311, TS-510, TS-511, TS-520, TS-530, TS-600, TS-700, TS-770, TS-801, TS-820, TS-830, TS-900, TX-310, TR-1300, TR-2200, TR-5200, TR-2300, TR-7010, TR-7200, TR-7500, TR-8000, TR-8200, TR-8300, and others)
This is a kit of unassembled parts; No Tech Support for kits !
KXLK820RYCW, KAMxl all modes to transceivers with Patch IN, Patch Out, and PTT via RCA plugs.
Also supports CW and FSK/RTTY via quarter inch standard connectors, all KAM modes.
KXLKW4013 Kenwood with 13 pin DIN, accessory jack to KAMxl and KAM98 Radio port Dsub 9
For use with KAMxl/KAM98 to older model Kenwood transceivers (TS 940, TS 440, etc)Special applications diode installed to mute microphone during transmit.
Model Number: KXLKW4013
BUXCOMM line isolator Baluns provide enhanced RF behavior by keeping your RF directed to the antenna, and not re-radiated off your coaxial cable shield (VSWR), or the equipment inside your HAM shack
BUXCOMM MasterMatch BALUN's, are the choice of HAM operator's around the world. In theory and practice, the BUXCOMM LISO is designed to separate your antenna and feed line. If your feed line is coax cable then you don't want the coax to be part of your antenna. Instead you want to deliver all your power to the antenna. The BUXCOMM "LISO" does this with ease.
The BUXCOMM Coaxial line isolator BALUN employs low-loss, silver plated, teflon insulated, SO-239 UHF connectors at each end as input and output connectors. BUXCOMM line isolator "LISO" applications include:
* feedline isolation along the coax feeder.
* use them at the input to your Linear, and antenna tuner.
* One of the most effective places to install the LISO is at the input to the BALUN that feeds your beam, yagi, Vertical, J-Poles and cubical - quad antennas.
* BUXCOMM LISO line isolator BALUN can be used anywhere in your coax feedline to eliminate RF re-radiation and TVI. It can be placed anywhere along your coax (before) your standard antenna BALUN. Do not install a LISO after your antenna BALUN.
Our BUXCOMM model LISO covers HF from 1.8-54 MHz Power Rated: 2000 watts PEP.
A 3 ft, RG8X jumper with PL259 installed at each end is included with the BUXCOMM 50 ohm line isolator.
See LWBALUNA for complete Long Wire Assembled Antenna with LWBALUN.
See LWBALUNK for Long Wire Antenna KIT with LWBALUN.
Impedance matching of the antenna to SWL receiver inputs can result in a large signal strength increase, sometimes as great as 20dB. A reasonable average of 4 to 7dB as compared to the long wire antenna when direct connected to the antenna input of the receiver.
The BUXCOM "LWBALUN" connects to the end of your long-wire antenna at the received end, and converts the long-wire, high impedance to approximately 50 ohms impedance.
This provides a greater amount of the antenna signal to be transferred to
the radio.
In most installations, a noticeable decrease in noise and a pronounced increase in signal has given the avid SWL DXer the edge.
The BUXCOMM LWBALUN works with shortwave radios with external antenna connectors.
The BUXCOMM LWBALUN is built to withstand harse outside weather conditions. It is easy to install and easy to use. All you have to do is attach your long-wire to the brass binding post (RED BAND), and connect the coax jumper (included) to your radio.
We've also provided a ground "brass binding-post" (BLACK RING) to enable you to add a ground wire for added ground protection.
Installing the LWBALUN out of doors, can further reduce the amount of near-field electrical noise reaching your radio inside the operating area.
When installing the LWBALUN outside, consider using RG58 (3/16" diameter) coax between the LWBALUN and your receiver.
Instructions and pictorials are included with the LWBALUN that provide installation examples.
Color is sky, blue-grey for aesthetic blending.
For complete KIT to build Antenna described here, see: "LWBALUNK"
For complete ASSEMBLED Antenna described here, see: "LWBALUNA"
NOTE: The LWBALUN can be used as a 9:1 ratio transmitting BALUN and handles up to 200 watts of SSB, RF power.
Impedance matching of the antenna to SWL receiver inputs can result in a large signal strength increase, sometimes as great as 20dB. A reasonable average of 4 to 7dB as compared to the long wire antenna when direct connected to the antenna input of the receiver.
The BUXCOM "LWBALUNA" connects to the end of this long-wire antenna at the received end, and converts the long-wire, high impedance to approximately 50 ohms impedance.
This provides a greater amount of the antenna signal to be transferred to
the radio.
In most installations, a noticeable decrease in noise and a pronounced increase in signal has given the avid SWL DXer the edge.
The BUXCOMM LWBALUNA works with shortwave radios with external antenna connectors.
The BUXCOMM LWBALUNA is built to withstand harse outside weather conditions. It is easy to install and easy to use. All you have to do is attach your long-wire to the brass binding post (RED BAND), and connect the coax jumper (included) to your radio.
We've also provided a ground "brass binding-post" (BLACK RING) to enable you to add a ground wire for added ground protection.
The LWBALUNA is supplied with RG58 (3/16" diameter) coax with PL259 connectors already installed at each end
Instructions and pictorials are included with the LWBALUNA that provide installation examples.
Color is sky, blue-grey for aesthetic blending.
The LWBALUNA, shown here is a completely ASSEMBLED SWL and Station Antenna
NOTE: The LWBALUN can be used as a 9:1 ratio transmitting BALUN and handles up to 200 watts of SSB, RF power.
Impedance matching of the antenna to SWL receiver inputs can result in a large signal strength increase, sometimes as great as 20dB. A reasonable average of 4 to 7dB as compared to the long wire antenna when direct connected to the antenna input of the receiver.
The BUXCOM "LWBALUNK" connects to the end of this long-wire antenna at the received end, and converts the long-wire, high impedance to approximately 50 ohms impedance.
This provides a greater amount of the antenna signal to be transferred to
the radio.
In most installations, a noticeable decrease in noise and a pronounced increase in signal has given the avid SWL DXer the edge.
The BUXCOMM LWBALUN works with shortwave radios with external antenna connectors.
The BUXCOMM LWBALUNK is built to withstand harse outside weather conditions. It is easy to install and easy to use. All you have to do is attach your long-wire to the brass binding post (RED BAND), and connect the coax jumper (included) to your radio.
We've also provided a ground "brass binding-post" (BLACK RING) to enable you to add a ground wire for added ground protection.
The LWBALUNK is supplied with RG58 (3/16" diameter) coax with PL259 connectors already installed at each end
Instructions and pictorials are included with the LWBALUNK that provide installation examples.
Color is sky, blue-grey for aesthetic blending.
The complete KIT is described here, see: "LWBALUNK"
For complete ASSEMBLED Antenna described elsewhere on this page, see: "LWBALUNA"
NOTE: The LWBALUN can be used as a 9:1 ratio transmitting BALUN and handles up to 200 watts of SSB, RF power.
CAT No, M68702L, M68702L Replacement, RF power module for many VHF transceivers. 135-160MHz, 12.5V, 60W OutPut, FM mobile radios. INSTALLATION AND SPEC SHEET IS INCLUDED WITH EACH M68702L.
M68702L is the RF power amplifier module in many Icom, Kenwood, Yaesu, Alinco, and similar VHF FM transceivers. 135-160MHz, 12.5V, 60W OutPut, FM Commercial two-way, and Amateur mobile radios. Ten (10) M68702L Modules for $37.95 eachCAT No, M68702LX10, M68702L Replacement, RF power module for many VHF transceivers. 135-160MHz, 12.5V, 60W OutPut, FM mobile radios.
INSTALLATION AND SPEC SHEET IS INCLUDED WITH EACH M68702L. M68702L is the RF power amplifier module in many Icom, Kenwood, Yaesu, Alinco, and similar VHF FM transceivers. 135-160MHz, 12.5V, 60W OutPut, FM Commercial two-way, and Amateur mobile radios. Ten (10) M68702L Modules for $295.00.
8 pin Mini DIN inline MALE connector with solder pins
CAT No, MFV5 The MFV5 is a very durable, white fiberglass antenna with a 300 watt power rating. 3db gain, broadband antenna.
All mounting hardware is included. Base mounting is built for easy fold-over when mounted on boats. Seventeen feet of white coaxial cable is included, attached with connector.
Wired for Icom radios with RJ45 Mic jack.
No-Features, Microphone only, no Up/Down or keypad buttons.
This microphone cable is our high quality 5 conductor cable.
It has a very flexible flex jacket and five 22-gauge wires. We had this microphone cable made for the HAM Radio user who is adding the latest model and popular microphone with XLR connectors. This cable is broadcast quality and used in thousands of recording and broadcast station studios world wide. Make your own cable lengths for your special cable applications.25 feet @ $12.95.
MJ1, Auto Antenna Jack for Motorola stype plug.
BUXCOMM MasterMatch BALUN's, are the choice of HAM operator's around the world.
Dont forget CAT No. CS104:
CAT No. CS104Our Master Match BALUN series are rated at 1000 watts PEP
In few cases, BALUN colors or design appearance may vary from those shown.
BUXCOMM MasterMatch BALUN's, are the choice of HAM operator's around the world.
CAT MM121, Master Match 12 to1 ratio BALUN used with most full wave end-fed and long-wire antennas. 
Dont forget CAT No. CS104:
CAT No. CS104 Our Master Match BALUN series are rated at 1000 watts PEP
BUXCOMM MasterMatch BALUN's, are the choice of HAM operator's around the world.
Master Match 16 to1 ratio BALUN used with ROMBIC, 160 Meter Loops, LOfer SkyWires, and antennas similar to multi-layered and end-fire antennas.MM161 is Power Rated at: 1.2kw SSB, 2.5:1 VSWR, 1.8 to 30 mHz
BUXCOMM BALUNS are designed by Communication Engineers, Built by Communication Engineers, and Made in the USA.
BALUN colors may vary from the colors shown.
BALUN housing is Ultraviolet stable, and Impact resistant.
BUXCOMM MasterMatch BALUN's, are the choice of HAM operator's around the world.
MM21 BUX COMM MasterMatch 2:1 Current Baluns are ideal for Quad and loop antenna feeding and matching.
BUXCOMM BALUNS are designed by Communication Engineers, Built by Communication Engineers, and Made in the USA.
In few cases, BALUN colors may vary from the colors shown.
BALUN housing is Ultraviolet stable, and Impact resistant.
Model Number: MM21
BUXCOMM MasterMatch BALUN's, are the choice of HAM operator's around the world.
MasterMatch MM41 4:1 BALUN, Features:o DynaMAX Colored and Hardened, UV Resistant Resin Enclosure
o Toroid CURRENT design, wound with teflon covered, silver flashed, copper wire.
o 50 ohm, silver plated, gold pin, teflon center insulator, SO-239 unbalanced input
o Heavy duty Hardened Brass, Balanced output terminals.
o 160 Meters through 10 Meters
o Heavy Duty, Lightweight construction
Dont forget CAT No. CS104:
CAT No. CS104Our Master Match BALUN series are rated at 1000 watts PEP
In few cases, BALUN colors or design appearance may vary from those shown.
BUXCOMM MasterMatch BALUN's, are the choice of HAM operator's around the world.
Dont forget CAT No. CS104:
CAT No. CS104 6:1 turns ratio, CURRENT typeOur Master Match BALUN series are rated at 1000 watts PEP
In few cases, BALUN colors or design appearance may vary from those shown.
Dont forget CAT No. CS104:
CAT No. CS104 9:1 turns ratio,CURRENT, Master Match series BUXCOMM BALUNs are rated at 1000 watts PEP.
In few cases, BALUN colors or design appearance may vary from those shown.
MP2, Auto Antenna Plug, Motorola stype plug.
MRF515 Prime, by Motorola $1.99 each
Specifications:
Part Number = MRF515
Manufacturer Name = Motorola
MSRPrice = 7.57
Description = Bipolar NPN UHF-Microwave Transisitor
V(BR)CEO (V) = 20
V(BR)CBO (V) = 35
I(C) Abs.(A) Collector Current = 150m
Absolute Max. Power Diss. (Watts) = 2.5
I(CBO) Max. (A) = 10u
@V(CBO) (V) (Test Condition) = 15
h(FE) Min. Static Current Gain = 20
h(FE) Max. Current gain. = 150
@I(C) (A) (Test Condition) = 50m
@V(CE) (V) (Test Condition) = 10
f(T) Min. (Hz) Transition Freq = 1.8G
@I(C) (A) (Test Condition) = 100m
@V(CE) (V) (Test Condition) = 10
Power Gain Min. (dB) = 8.0
@V(CE) (V) (Test Condition) = 12.5
@Freq. (Hz) (Test Condition) = 470 MHz
Semiconductor Material = Silicon
C(obo) (Max) (F) = 4.0p
@Freq. (Hz) (Test Condition) = 1.0M
Package = TO-39
Military = N
?
MRF515 Prime, by Motorola: 100 pcs, $99.00
100 pcs $99.00
Specifications:
Part Number = MRF515
Manufacturer Name = Motorola
MSRPrice each = 7.57
Description = Bipolar NPN UHF-Microwave Transisitor
V(BR)CEO (V) = 20
V(BR)CBO (V) = 35
I(C) Abs.(A) Collector Current = 150m
Absolute Max. Power Diss. (Watts) = 2.5
I(CBO) Max. (A) = 10u
@V(CBO) (V) (Test Condition) = 15
h(FE) Min. Static Current Gain = 20
h(FE) Max. Current gain. = 150
@I(C) (A) (Test Condition) = 50m
@V(CE) (V) (Test Condition) = 10
f(T) Min. (Hz) Transition Freq = 1.8G
@I(C) (A) (Test Condition) = 100m
@V(CE) (V) (Test Condition) = 10
Power Gain Min. (dB) = 8.0
@V(CE) (V) (Test Condition) = 12.5
@Freq. (Hz) (Test Condition) = 470 MHz
Semiconductor Material = Silicon
C(obo) (Max) (F) = 4.0p
@Freq. (Hz) (Test Condition) = 1.0M
Package = TO-39
An Unadvertised Special
- Range: 200mV to 1000V
- Resolution: 100 uV to 1 V
ACV
- Range: 200 V to 750 V
- Resolution 100 mV to 1 V
DCA
- 200 uA to 10 A
- Resolution: 1 V to 10 mA
Resistor
- Range: 200 ohm to 2000k ohm
- Resolution: 100m ohm to 1K ohm
Transistor (hFE)
- Range: NPN/PNP
- Resolution: 0-1000
Unit Features
- Test Leads
- Operators Manual
Our pocket size, 3 1/2 digital Multi Meter is perfect for measuring DC and AC Voltage, DC Current, Diode, Temperature. The unit features these technical specifications: DCV
Features
- light and smart design for easy carrying
- low noise and excellent performance
- ideal for schools, churches, factories, meetings, guides and street vendors
Specifications
- speaker: 2.5\\\ / 4 ohm
- power output: 5W max.
- headset with dynamic microphone: 200 ohm
- power supply: DC 9V (6 x 1.5V AA-batteries (not incl.) or AC/DC adapter)
- weight: 330g
- dimensions: 180 x 80 x 65.5mm
- operating range: 50m (indoors or outdoors)
VECTRONICS,�� SWR & RF POWER WATTMETER with 300 watt and 3000 watt Power Ranges. We include FREE, 3 ft RG8X jumper cable with PL259s attached at each end.
The PM-30 can simultaneously measure and display forward power, reflected power, and SWR in the frequency range of 1.8 to 60 MHz.� Accuracy of the readings is assured because the PM-30 features a true shielded directional coupler.� The back lit meter (with optional power adapter) can also display either peak or average power readings.SPECIFICATIONS
FREQUENCY RANGE:��������������������������������� 1.8 to 60 MHz
POWER RANGE:.......�������������������������������� 300 and 3000 W Ranges
METER LAMP:...........������������������������������� 12 Vdc with on/off switch
OPTIONAL ADAPTER:������������������������������ Vectronics AC-12
DIMENSIONS:...........������������������������������� 5.3"W x 5.75"D x 3.5"H
WEIGHT:..................������������������������������ 1.2 lbs.
CHASSIS: ................������������������������������ Alodine Plated Aluminum
FRONT PANEL CONTROLS
ON/OFF ...................������������������������������ Meter Lamp Switch
3000W/300W...........������������������������������� Range Switch
PEAK/AVG.................������������������������������ Selection Switch
REAR PANEL CONNECTIONS
RF OUTPUT...............������������������������������ SO-239 Connector
RF INPUT..................������������������������������ SO-239 Connector
POWER CONNECTOR�������������������������������� 2.5mm coaxial type jack
POWER PLUG, CABLE & JACK COMBO
Same size and type as the power plug and jack on most Packet Radio TNCees and Kantronic KPC/KAM.Mounting hardware included. 1.99/set
- NOTE Receive AF is at TIP of 3.5mm plug.
- For FSK/RTTY operation, Use cable FT4RY Cable length is 6 ft
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- NOTE Receive AF is at TIP of 3.5mm plug.
- For FSK/RTTY operation, Use cable FT4RY Cable length is 6 ft
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- Use also with YAESU FT-920 (insure that data mode switch is in AFSK position)
- NOTE: Use the FT1000 MkV,EASY SET to configure 5 pin DIN, Packet jack, USB
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
Transceiver PSK31 Interface, includes FIELD NOTE: Use the FT1000 MkV, EASY SET to configure 5 pin DIN, Packet jack, for USB. For FSK/RTTY operation, Use cable FT4RY
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
Alinco Hand-Helds with 2.5mm & 3.5mm I/O DJ180/480, DJ-196(DJ-195/296/496, DJ-F1/F4, DJ-S1/S4, DJ-160, DJ-460, DJ-162, DJ-560, ALM-203T, ALR-206, DJ-180T, DJ-280T, DJ-480T, DJ-580T, DJ-191T,
ICOM, handheld transceiver(s) with 2.5mm & 3.5mm jacks Icom W32A, W32E, IC-T7A, T7E, IC-T8A, T8E, and Icom Hand Helds with similar I/O. NOTE: Be sure your Hand-Held uses the same connector format: 2.5mm (TxAFSK/PTT) and 3.5mm (Rx AF).
Radio Shack HTX-202 & HTX-404 and similar Radio Shack HTs
YAESU FT-51R
Yaesu handhelds with similar I/O and other make/model handheld transceiver(s) using similar 2.5mm (TxAFSK/PTT) and 3.5mm (Rx AF) mono I/O.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
SGC model SG-2020 This interface uses the 3.5mm external speaker jack to extract receive audio.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
R2020T, RASCAL GLX to UNIDEN Tempo 2020 HF transceiver.
Ten-Tec with 5 pin DIN data I/O accessory jack Ten-Tec PEGASUS, Jupiter, (538), and radios with similar 5 pin DIN data I/O. 5 pin (standard) DIN to 5 pin DIN.
YAESU FT-1000 Mark V and FT-2000 Transceivers PSK31 Interface Use also with YAESU FT-920 (insure that data mode switch is in AFSK position)
SPECIAL NOTE: Use the FT1000 MkV, EASY SET to configure 5 pin DIN, Packet jack, for USB. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)
Features:
| The new improved 2007 RASCAL GLX offers more features and modes, including: PSK31, SSTV, EchoLink, Packet, RTTY (both FSK & AFSK), eQSO, WJST, APRS, CW, MT63, and many more. Now use only one RASCAL "GLX" with multiple transceivers. A simple cable change enables you to use our new RASCAL with a different make and model transceiver. HF, VHF, or UHF
|
Ten Tec and YAESU Transceivers with 5 pin DIN data I O accessory jack.
RASCAL to Radio Interface cable is FREE also includes FREE CD with RASCAL to SoundCard software and related HAM Radio material.This is a KIT, NOT ASSEMBLED, Assembly instructions are included with KIT.
YAESU transceivers using the rear panel RCA jacks YAESU FT-102, FT-757, FT-767, FT-920, and some TenTec having similar RCA jacks.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
This Universal adjustable mounting bracket is for most mobile amateur radios on the market today. Adjustable from 2 to 9 inches. Comes in flat black.
DX-77T, DX-70TH, DR-110T, DR-130T, DR-410T, DR-510T, DR.112T, DR-570T, DR-590, DR-592, DR-599, DR-600, DR-430T, DR135T, EMKII, DR-235T-TG, DR-435T-TG, DR-620T, DR-M06TH, DR-M03SX, ALR-22T, ALR-22HT, ALR-72T, ALD-24T,
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
DR-140, DR-605, and Alinco transceivers with RJ45 Mic I/O
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
Alinco 8 pin screw-on mic with receive at pin 6 of Mic I/O. For ALINCO models: DX-77, DR-119, DR-1200
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
DX-77T, DX-70TH, DR-110T, DR-130T, DR-410T, DR-510T, DR.112T, DR-570T, DR-590, DR-592, DR-599, DR-600, DR-430T, DR135T/EMKII, DR-235T/TG, DR-435T/TG, DR-620T, DR-M06TH, DR-M03SX, ALR-22T, ALR-22HT, ALR-72T, ALD-24T,
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
DX-77T, DX-70TH, DR-110T, DR-130T, DR-410T, DR-510T, DR.112T, DR-570T, DR-590, DR-592, DR-599, DR-600, DR-430T, DR135T/EMKII, DR-235T/TG, DR-435T/TG, DR-620T, DR-M06TH, DR-M03SX, ALR-22T, ALR-22HT, ALR-72T, ALD-24T,
with External Speaker Plug.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX, ALMOND (PC) Color.
These RASCAL GLX are Fully tested, and are new. The execption is; they are off-white color, and some may have RASCAL to PC cables that are of a slightly different color than the RASCAL case color.
Fully tested, complete with Sound Card Software CD, and Operator's Manual. RASCAL to Radio interface cable not included. You may select the cable for your transceiver from the "RASCAL to Radio Interface Cables" list. 19.95 each.
AZDEN transceivers with 8 pin screw-on mic and 3.5mm Ext Spkr plug
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL to transceiver cable for hard-keyed CW operating. CBL-CW is supplied with 3.5mm and 1/4 plugs.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
DJ-120, DJ-160/460, DJ-100, DJ-120 DJ-200 DJ-500, DJ-C1T, C4T, C5T,
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
YAESU FT-1802 And Yaesu transceivers with RJ 12 Mic and 3.5mm Ext Spkr jack.
YAESU FT-2800, 2800M, etc
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
YAESU FT-2500M 2400 & Yaesu transceivers with similar I/O YAESU FT-2500, 2500M, 2400, etc
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
YAESU FT-2600 & Yaesu transceivers with DB9f I/O YAESU FT-2600, 2600M, etc
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
YAESU FT-2800 & Yaesu transceivers with RJ 12 Mic & 3.5mm Ext Spkr YAESU FT-2800, 2800M, etc
Also compatible with FT1802, FT1500M.. RJ12 Mic
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
YAESU transceivers with 4 pin DIN RTTY jacks NOTE: This cable enables FSK/RTTY operation only.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
YAESU FT-736, FT-600, FT-890, & Late Model FT-900. 3.5mm HF Data I/O HF jack PTT is via RCA PTT Jack.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
Early model YAESU FT-900 and Yaesu transceivers with similar I/0 For LATE model FT-900, see CBL F600 above. For FSK/RTTY operation, Use cable CBL FT4RY
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
YAESU FT-2800 & Yaesu transceivers with RJ 12 Mic & 3.5mm Ext Spkr YAESU FT90R and YAESUs with RJ12 Mic jacks.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
Radio Shack 10 meter transceiver, model HTX10
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
Radio Shack Model HTX-100
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
Radio Shack Model HTX-212, and HTX-242 or RS 45
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
Radio Shack HTX-252
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
ICOM Transceivers with 13 pin DIN accessory jack w/ FSK pin. Wired for 160-6 meter (HF) use.
- BEST CHOICE for Icom:
- IC-703,
- IC-706 mk II,G.
- IC7000,
- IC 7800,
- IC-718;
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
ICOM Transceivers with 13 pin DIN accessory jack wired for VHF/UHF (NOT HF, see IC13RY) operation
- For Icom:
- IC-703,
- IC-706 mk II
- IC-718
- IC 7800
- IC 7000
- ICOM transceivers with similar I/O jack.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
ICOM HF, VHF, and UHF transceivers with RJ-45 Modular Mic jacks
- ICOM models:
- IC 207H
- IC 2720
- IC 2800
- IC 703
- IC-706
- IC-718
- IC-V8000
- IC-281
- IC-381
- IC-481
- IC-681
- IC-2000
- IC-2100
- IC-2200
- IC 2350
- IC 2340
- And Icom with similar Icom I/O
- (Note: for 706 & 718, most ops prefer CBL IC13RY)
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
ICOM HF-VHF Transceivers with 4 pin screw-on mic & Ext Spkr ICOM models IC-202, IC-215, IC-22S, IC-245, IC-280, IC-402, IC-502, etc.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
ICOM HF-VHF Transceivers with 4 pin screw-on mic & Ext Spkr ICOM models IC-202, IC-215, IC-22S, IC-245, IC-280, IC-402, IC-502, etc...
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
ICOM HF, VHF,/UHF Transceivers with round, 8 pin Screw-On MIC & Ext Spkr jack. Uses Microphone connector
ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746, 756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics. Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751,
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
ICOM HF VHF UHF Transceivers w 8 pin Screw On MIC & Ext Spkr jack. Icom transceivers with 8 pin screwOn mics.
ICOM HF, VHF,/UHF Transceivers w/8 pin Screw-On MIC & Ext Spkr jack. ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746, 756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics. Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751, . . MORE +
ICOM HF-, Transceivers with 8 pin DIN accessory jack
ICOM Models: IC-275, IC-475, IC-721, IC-723, IC-725, IC-726, IC-728, IC-729, IC-732, IC-735, IC-736, IC-737, IC-737A, IC-738, IC-746, IC-746,IC746PRO, IC-756, IC-756PRO, IC-756PROII, IC-760/Pro, IC-761, IC-765, IC-775, IC-775DSP, IC-780, IC-781, IC-820, IC-821H, IC-910H, IC-970E, IC-970H, IC-1275, IC-2000 Icom transceivers with 8 pin DIN accessory I/O ports & Pro, Pro II, Pro III series
Icom transceivers with 8 pin DIN accessory I/O ports & Pro, Pro II, Pro III series
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
KDK Transceivers w/4 pin screw-on mic & Ext Spkr jack
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
Kenwood Transceivers with 13 pin DIN accy jack. w/ FSK pin. YES, It includes TS-2000 TS-140, TS-450, TS-570, TS-670, TS-680, TS-690, TS-711, TS-790, TS-811, TS-850, TS-870, TS-950, and Kenwood transceivers with 13 pin DIN accessory jacks.
Early Kenwood (940 & 440 below) transceivers with 13 pin DIN Accessory Jacks, see RKW4013 For TS-850 FSK operation, see CBL KW13RY R.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
Kenwood TS-850 and KW Transceivers with 13 pin DIN accy and FSK RCA Jack For TS-850 Kenwood transceivers with 13 pin DIN and RTTY/FSK RCA Jack.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
Early KENWOOD HF Transceivers with 13 pin DIN accessory jack TS-940, 440.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
KENWOOD HF and VHF Transceivers with (RJ45) MODULAR mic TM-251, TM-2400, TM-255, TM-261, TM-451, TM-455, TM-461, TM-643, TM-732, TM-733, TM-741, TM-742, TM-833, TM-841, TM-842, TM-941, TM-942, and Kenwoods with RJ45 mic jacks
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
KENWOOD HF Transceivers w/4 pin screw-on mic & Ext Spkr jack TS-120, TS-130, TS-180, TS-311, TS-510, TS-511, TS-520, TS-530, TS-600, TS-700, TS-770, TS-801, TS-820, TS-830, TS-900, TX-310, TR-1300, TR-2200, TR-5200, TR-2300, TR-7010, TR-7200, TR-7400, TR-7500, TR-8000, TR-8200, TR-8300, and Kenwood transceivers with 4 pin, screw-on microphones
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
Kenwood TR 7600, TR 7625 and Kenwoods with with 5 pin Screw-On Mic and 3.5mm Ext Spkr jack.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
KENWOOD HF Transceivers with 6 pin screw-on mic & Ext Spkr jack
TR-7730, TR-7750, TR-7800, TR-7850, TR-7930, TR-7950, TR-8400, TR-9000, TR-9130, TR-9500, and other Kenwood transceivers with 6 pin screw-on mic connectors.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
KENWOOD Transceivers with 8 pin Screw-On mic & Ext Spkr I/O KENWOOD models: TM-201, TM-221, TM-231, TM-241, TM-2530, TM-401, TM-421, TM-431, TM-441, TM-531, TM-541, TM-621, TM-631, TM-701, TM-721, TM-731, TR-3200, TR-50, TS-50/S, TS-60, TS-751, TS-851, TS-140, TS-430, TS-440, TS-450, TS-660, TS-670, TS-680, TS-690, TS-701, TS-711, TS-780, TS-790, TS-811, TS-850, TS-870, TS-930, TS-940, TS-950, TW-4000, 4100,
and Kenwood transceivers with 8 pin screw-on Mic connectors
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
PLEASE READ CAREFULLY !
Regardless of the make (brand) or model transceiver, If it has the 6 pin Mini DIN as an accessory Data I/O jack, then by all means use it. The ISO 9002 standard was adopted by most Amateur Radio manufacturers as the STANDARD of the industry. NOTE: that this standdard applies to Yaesu, Kenwood, Icom, Azden. To our knowledge, Alinco OEM does not comply with this standard.
KENWOOD Transceivers with 6 pin mini DIN (ISO standard) jack (KENWOOD Models: TM-255, TM-455, TM-733, TM-833, TM-G707, TM-V7A, TM-G 707A, (Delta) D-700, 480hx, and transceivers with 6 pin mini DIN data I/O)
Features:
| The new improved 2007 RASCAL GLX offers more features and modes, including: PSK31, SSTV, EchoLink, Packet, RTTY (both FSK & AFSK), eQSO, WJST, APRS, CW, MT63, and many more. Now use only one RASCAL "GLX" with multiple transceivers. A simple cable change enables you to use our new RASCAL with a different make and model transceiver. HF, VHF, or UHF
|
Midland Transceivers with 4 pin screw-on mic and Ext Spkr jack
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
For Late Model OMNI Ten-Tec transceivers with; FSK, PTT, Tx IN, Rx IN RCA jacks: Ten-Tec OMNI V, & OMNI VI. This CBL may also work with other TenTec transceivers.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
Ten-Tec ORION (565) Ten-Tec Orion transceivers with AUX I/O, 8 pin DIN jack.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
ACCSW Radio Port TO Cat # RPMDIN, Cable MDIN. For all makes and model transceivers with 6 pin Mini DIN,.
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are 12.95 each when purchased with the ACCSW switch box. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Cables are regular $19.95 each, however, if purchased with the ACCSW switch box they are 12.95 each. Order via toll free order line:
800 726 2919
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
RCI 5054 and RCI radios with 6 pin screw-on MIC This interface uses the 3.5mm external speaker jack for receive AF, and requires SwitchBox for SSTV.
This format may also apply to certain Uniden transceivers.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
KENWOOD HandHeld Transceivers with 3.5mm & 2.5mm stereo I/O (KENWOOD Models: TH-F6A, TH-F7E and transceivers with similar I/O)
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
DRAKE 4 pin screw-on mic with 3.5mm (1/8inch) Ext Spkr jack Models TR-7 or TR-7/A, and some TR-22, TR-33, TR-7, UV-3 radios
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
DRAKE 4 pin screw-on mic with 3.5mm (1/8 inch) Ext Spkr jack Models TR-7 or TR-7/A, and some TR-22, TR-33, TR-7, UV-3 radios
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
Ten-Tec transceivers w/4 pin screw-on mic and 1/4 inch Ext Spkr I/O
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
UNIDEN and some HR2510 with 5 pin Screw-On Mic and Ext Spkr jack.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
BUXCOMM MasterMatch BALUN's, are the choice of HAM operator's around the world.
CAT No, RXBALUN, bridges the impedance gap, and enables an unbalance to balanced match between your antenna and receiver. The RxBALUN enables an unbalance to balanced match between the antenna and receiver.
When feeding long-wire antenna, attach HOT end of long-wire to the RED terminal, and Ground to BLACK terminal.
YAESU transceivers with 4 pin (screw-on) mic input Receive audio is from the external speaker jack. YAESU models: having 4 pin screw-on microphones.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
YAESU transceivers with 8 pin (screw-on) mic input. Receive audio be taken from the external speaker jack.
YAESU models: FT-1, FT-77, FT-102, FT-107, FT-211, FT-290 MKII, FT-480, FT-690 MKII, FT-707S, FT-712, FT-726, FT-736, FT-747, FT-757, FT-767, FT-770, FT-840, FT-850, FT-790 MK II, FT-912, FT-980, FT-990, FT-1000, FT-2200, FT-2700, FT-5100, FT-7200, FT-840, FT-890, FT-4700, FT-212, FT-ONE-S, FT-650, 707, 712, 726, 736, 756, 767, 77, 790II, 700, 840, 890, 990, 1000D and Yaesu with 8 pin Screw On MIC connectors ,
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
YAESU hand-held transceivers with 4 circuit, 3.5mm I/O jack. YAESU FT-10, FT-40, FT-50, VX-1, VX-5, VX-150, and Yaesu handhelds with similar 4 circuit, 4 conductor jacks I/O.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
BUXCOMM MasterMatch BALUN's, are the choice of HAM operator's around the world.
Dont forget CAT No. CS104:
CAT No. CS104 
NOW ON SALE through December 26, at 39.95. During this sale, we are including the BUX V-BALUN absolutely FREE
Our SIXSTIX includes the BUXCOMM VBALUN for maximum transfer of RF to the antenna. Omni-directional, vertical 50 to 54 MHz antenna lets you work plenty of DX in all directions even with low power.
Ground-isolation via the BUX V-BALUN eliminates common mode current paths and Reduces undesirable feedline re-radiation.
110 inches of durable and strong fiberglass radiator withstands harse and rugged environments, yet it allows you to take it mountain-topping, or for portable operation on Field-say.
Rigid elements make it a "dipole-on-a-stick" ready to connect your coax and make six (6) meter DX contacts.
Antenna & V-BALUN are 
Don t forget CoaxSeal, CS104.
Effective, easy-to-use RFI fighter.
Cut down on RFI (radio frequency interference) with this snap-together Toroid Choke. Easy to use on phone lines, computers, AC, audio and coax cables. No cable cutting necessary; simply snap this ferrite choke around the wire or cable.
This Speaker is designed for 2-way radio communications voice and speech range reproduction.
The SRF103 is sometimes used as a companion device driver for our Catalog number MRF515 by Motorola.
See MRF515 elsewhere on this web page
This one of two new stake bed mounts for the serious amateur on the go.
The mount is constructed of stainless steel and locates the antenna
on either side of the bed. Expandable rubber base locks mount when tightened for
secure fit. Great for HF stick and 102? stainless steel whip. Fits most pickup truck models and brands.
SOLDERING IRON STAND FOR VTS20U
Features
- economic version
- with cleaning sponge
Stock Info
- Inner carton:
- Outer Carton: 50
- EAN Barcode: 5410329223533
- Packaging: Box (Carton)
This signal tracer/injector KIT has been designed to inject or detect a specific signal into an audio circuit or linear amplifier for test, tuning, and trouble-shooting (such as amplifiers, radios, tone controls, ...) so as to detect the fault. In this way problems can be isolated quickly and easily. The signal tracer may also be used as a simple monitor or audio amplifier.
Kit Specifications
- injector:
- 0-2.5Vrms output (adjustable)
- output impedance: 1.5Kohm
- frequency: ? 1kHz
- tracer:
- 3.5mV to 10Vrms sensitivity (adjustable)
- gain: 40dB
- input impedance: 50k ohm
- output power: 0.5W / 8ohm
- power requirement: 7-9V AC or 9-12V DC (9 Volt Battery) / 150mA
- dimensions: 2.4 x 2.1
Don t forget CoaxSeal, CS104.
You will need a coax jumper between the meter and radio.
Specifications:
- Impedance: 50-52 ohms
- SWR: 1:1-1:3
- Accuracy: +-5%
- Frequency Range: 1.7-150MHz
- Antenna: 5" Ant.
- Dimensions: 6" x 2" x 2"
The SWR6 cross-needle SWR and power meter power covers 140-160 MHz VHF and 400-480 MHz UHF.
Three power ranges are available: ?10, 100 and 1000 watts. SO-239 input and output.
A builtIn toggle switch on the rear panel to select VHF or UHF metering.
TCX115 600 Ohms on primary with 365 Ohm load on secondary. Primary: 150 Ohms. Secondary: 140 Ohms.
600 OHM/600 OHM AUDIO COUPLING TRANSFORMERS for use in Sound Card to HAM Radios in PSK & SSTV interfacesGREAT FOR TELEPHONE LINE MATCHING and Audio coupling in Amateur Radio Equipment.
This transformer can also be used as an isolation/audio coupling transformer to reduce hum and prevent noise in PC SoundCard Input and Output.
600/600 impedance
Freq +/- 1.5db 300Hz>9.5kHz
Cat # TDP2, ANTENNACRAFT TDP2 Rotator for VHF or UHF BEAMS.
This Rotor may also be used for large HDTV, TV/FM ANTENNAS
- ANTENNACRAFT TDP2 TV/FM ANTENNA ROTATOR
- DEPENDABLE & RELIABLE
- SIMPLIFIED MULTI-CHANNEL RECEPTION
- FULLY AUTOMATIC
- HEAVY DUTY MOTOR HANDLES LARGE ANTENNA WITH PLENTY OF TORQUE TO BREAK THRU HEAVY ICE LOADS
- STRONG MACHINE-CUT GEARS THAT WON'T BIND
- BRAKE PADS HOLD FIRM TO PREVENT HIGH WIND DAMAGE (TESTED TO 70 MPH)
- 2 SYNCHRONIZED MOTORS GIVE EXACT DEGREE OF STATION LOCATION
- ONE PIECE HIGH ALLOY ALUMINUM CONSTRUCTION ASSURES TOTAL WEATHER PROTECTION
- GOLD, CORROSION-RESISTANT COATED
- HOLDS MAST UP TO 2" DIAMETER
- REQUIRES 3-WIRE ROTATOR CABLE
Retail Price: $99.95
BUXCOMM Discount Price: $59.95
Cat # TENTEC4M, All Cables, Connectors, Components, Case, Custom designed Printed Circuit board, PSK31 software, pictorial diagrams, schematics, software CD and setup instructions, are included with every ISO interface, kit.
There are no jumpers to joggle, no wall-wart or external power supplies. A CD with more than 50 Sound Card software packages to choose from. Freeware, Shareware, and Commercial software will enable you to enjoy the best of your PC sound card and the HAM Radio digital modes. This interface utilizes transformer coupling between the PC Sound Card line in/line out, and your transceiver. Automatic PTT is via serial comport and software control.No other manufacturer offers you this soundcard to transceiver interface value!
Ten-Tec HF Transceivers with 4 pin screw-type MIC connector (Paragon, Argonaut, Delta II, Scout, etc...) to PC Sound Card configured for PSK31; BPSK, and QPSK and other digital modes. NOTE; Receive AF is via the external speaker jack.
This is a kit of unassembled parts; No Tech Support for kits !
RASCAL GLX are Regular 49.95, these catalog number TPINK are reduced to 37.95 since they have a pink RS232 comport cable, otherwise, they are exactly the same as the RASCAL GLX. Our OEM said they d dump them on us at a reduced cost, so we took them at their word.
When you check out, be sure to enter the catalog number for your FREE RASCAL to Radio cable. We are NOT responsible for incorrect cable selection. If you don t understand how to select the free cable, include your radio make and model number.
Number one in our new stake hole bed mounts for the serious amateur,
whether it?s competition time or just on the go.
The mount is constructed of stainless steel and locates the antenna
directly over the truck bed rail. Expandable rubber base locks mount
when tightened for secure fit. Great for HF stick and 102? stainless steel whip.
Fits most pickup truck models and brands.
ICOM HF VHF UHF Transceivers w 8 pin Screw On MIC & Ext Spkr jack. Icom transceivers with 8 pin screwOn mics.
ICOM HF, VHF,/UHF Transceivers w/8 pin Screw-On MIC & Ext Spkr jack. ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746, 756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics. Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751, . . MORE +
TT3RS45D, Tiny Trak 3 to Radio Shack transceivers with RJ45 Mic Jacks, and 3.5mm Ext Spkr Jack. HTX-212, HTX-242, etc....
4 for .99
CAT No., UH015 RF Choke
Great for the laptop or PC that does not have a spare serial comport. All drivers are included on the CD that accompanies this USB to serial converter.
USB to RS-232 Adapter adds a serial comport to your computer, or Laptop.Description:?Add RS-232 devices to your computer without IRQ hassles. Great for laptops. Each adapter provides an RS-232 serial comport. Add additional serial ports with each USB2SC for additional serial ports.
Win XP compatible!
YAESU FT-2600 & Yaesu transceivers with DB9f I/O YAESU FT-2600, 2600M, etc
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for YAESU FT-2600 & Yaesu transceivers with DB9f I/O YAESU FT-2600, 2600M, etc- NOTE Receive AF is at RING of 3.5mm plug.
- For FSK/RTTY operation, Use cable FT4RY Cable length is 6 ft
This RASCAL GLX"US" series works with PCees having either or both USB or SERIAL comports.
- NOTE Receive AF is at TIP of 3.5mm plug.
- For FSK/RTTY operation, Use cable FT4RY Cable length is 6 ft
Features:
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for YAESU FT-1000"MP" & Mark V Field, Transceiver PSK31 Interface cable "NOTE" Receive AF is at "TIP" of 3.5mm plug. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)*- Use also with YAESU FT-920 (insure that data mode switch is in AFSK position)
- NOTE: Use the FT1000 MkV,EASY SET to configure 5 pin DIN, Packet jack, USB
Features:
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
This MultiMode/Multi purpose FT-1000D to RASCAL interface Cable included FREE. Transceiver PSK31 Interface, includes FIELD NOTE: Use the FT1000 MkV, EASY SET to configure 5 pin DIN, Packet jack, for USB. For FSK/RTTY operation, Use cable FT4RY
Features:
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
This 1KMP5D4RY RASCAL to FT 1000MP/MK V, multimode/multi purpose cable is included FREE with the USR1KMPRY.Alinco Hand-Helds with 2.5mm & 3.5mm I/O DJ180/480, DJ-196(DJ-195/296/496, DJ-F1/F4, DJ-S1/S4, DJ-160, DJ-460, DJ-162, DJ-560, ALM-203T, ALR-206, DJ-180T, DJ-280T, DJ-480T, DJ-580T, DJ-191T,
ICOM, handheld transceiver(s) with 2.5mm & 3.5mm jacks Icom W32A, W32E, IC-T7A, T7E, IC-T8A, T8E, and Icom Hand Helds with similar I/O. NOTE: Be sure your Hand-Held uses the same connector format: 2.5mm (TxAFSK/PTT) and 3.5mm (Rx AF).
Radio Shack HTX-202 & HTX-404 and similar Radio Shack HTs
YAESU FT-51R
Yaesu handhelds with similar I/O and other make/model handheld transceiver(s) using similar 2.5mm (TxAFSK/PTT) and 3.5mm (Rx AF) mono I/O.
Features:
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable forAlinco Hand-Helds with 2.5mm & 3.5mm I/O DJ180/480, DJ-196(DJ-195/296/496, DJ-F1/F4, DJ-S1/S4, DJ-160, DJ-460, DJ-162, DJ-560, ALM-203T, ALR-206, DJ-180T, DJ-280T, DJ-480T, DJ-580T, DJ-191T, ___ ICOM, handheld transceiver(s) with 2.5mm & 3.5mm jacks Icom W32A, W32E, IC-T7A, T7E, IC-T8A, T8E, and RASCAL GLX with FREE cable for Icom Hand Helds with similar I/O. NOTE: Be sure your Hand-Held uses the same connector format: 2.5mm (TxAFSK/PTT) and 3.5mm (Rx AF). RASCAL GLX with FREE cable for RADIO SHACK, Radio Shack HTX-202 & HTX-404SGC model SG-2020 This interface uses the 3.5mm external speaker jack to extract receive audio.
Features:
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for SGC model SG-2020 This interface uses the 3.5mm external speaker jack to extract receive audio.Ten-Tec with 5 pin DIN data I/O accessory jack Ten-Tec PEGASUS, Jupiter, (538), and radios with similar 5 pin DIN data I/O. 5 pin (standard) DIN to 5 pin DIN.
YAESU FT-1000 Mark V and FT-2000 Transceivers PSK31 Interface.
Ten Tec and YAESU Transceivers with 5 pin DIN data I O accessory jack.
RASCAL to Radio Interface cable is FREE also includes FREE CD with RASCAL to SoundCard software and related HAM Radio material.Use also with YAESU FT-920 (insure that data mode switch is in AFSK position)
SPECIAL NOTE: Use the FT1000 MkV, EASY SET to configure 5 pin DIN, Packet jack, for USB. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)
Features:
This RASCAL GLX works with PCees having either or both USB or SERIAL comports.
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for RASCAL GLX with FREE cable for Ten-Tec with 5 pin DIN data I/O accessory jack Ten-Tec PEGASUS, Jupiter, (538), and radios with similar 5 pin DIN data I/O. 5 pin (standard) DIN to 5 pin DIN. YAESU FT-1000"Mark V" Transceiver PSK31 Interface __ Use also with YAESU FT-920 (insure that data mode switch is in AFSK position) SPECIAL NOTE: Use the FT1000 MkV, "EASY SET" to configure 5 pin DIN, Packet jack, for USB. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)YAESU transceivers using the rear panel RCA jacks YAESU FT-102, FT-757, FT-767, FT-920, and some TenTec having similar RCA jacks.
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for TenTec, and YAESU Transceivers with Patch IN, Patch OUT, and PTT RCA jacks YAESU transceivers using the rear panel RCA jacks, YAESU FT-102, FT-757, FT-767, FT-920, etcThis RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for YAESU FT-847 3.5mm HF Data I/O HF jack For Yaesu FT-847 "HF" Data Jack (*NOTE: see CBL MDIN for 847 VHF operationDX-77T, DX-70TH, DR-110T, DR-130T, DR-410T, DR-510T, DR.112T, DR-570T, DR-590, DR-592, DR-599, DR-600, DR-430T, DR135T, EMKII, DR-235T-TG, DR-435T-TG, DR-620T, DR-M06TH, DR-M03SX, ALR-22T, ALR-22HT, ALR-72T, ALD-24T,
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
DR-140, DR-605, and Alinco transceivers with RJ45 Mic I/O
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for DR-140, DR-605,Alinco 8 pin screw-on mic with receive at pin 6 of Mic I/O. For ALINCO models: DX-77, DR-119, DR-1200
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for Alinco 8 pin screw-on mic with receive at pin 6 of Mic I/O.For ALINCO models: DX-77, DR-119, DR-1200DX-77T, DX-70TH, DR-110T, DR-130T, DR-410T, DR-510T, DR.112T, DR-570T, DR-590, DR-592, DR-599, DR-600, DR-430T, DR135T/EMKII, DR-235T/TG, DR-435T/TG, DR-620T, DR-M06TH, DR-M03SX, ALR-22T, ALR-22HT, ALR-72T, ALD-24T,
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for DX-77T, DX-70TH, DR-110T, DR-130T, DR-410T, DR-510T, DR.112T, DR-570T, DR-590, DR-592, DR-599, DR-600, DR-430T, DR135T/EMKII, DR-235T/TG, DR-435T/TG, DR-620T, DR-M06TH, DR-M03SX, ALR-22T, ALR-22HT, ALR-72T, ALD-24T,DX-77T, DX-70TH, DR-110T, DR-130T, DR-410T, DR-510T, DR.112T, DR-570T, DR-590, DR-592, DR-599, DR-600, DR-430T, DR135T/EMKII, DR-235T/TG, DR-435T/TG, DR-620T, DR-M06TH, DR-M03SX, ALR-22T, ALR-22HT, ALR-72T, ALD-24T,
with External Speaker Plug.
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for Alinco transceivers with 8 pin screw-on Mics with 3.5mm Ext Spkr jack.AZDEN transceivers with 8 pin screw-on mic and 3.5mm Ext Spkr plug
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for AZDEN transceivers with 8 pin screw-on mic and 3.5mm Ext Spkr plug
RASCAL to transceiver cable for hard-keyed CW operating. CBL-CW is supplied with 3.5mm and 1/4 plugs.
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for RASCAL to transceiver cable for hard-keyed CW operatingDJ-120, DJ-160/460, DJ-100, DJ-120 DJ-200 DJ-500, DJ-C1T, C4T, C5T,
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for DJ-120, DJ-160/460, DJ-100, DJ-120 DJ-200 DJ-500, DJ-C1T, C4T, C5T,YAESU FT-1802 And Yaesu transceivers with RJ 12 Mic and 3.5mm Ext Spkr jack.
YAESU FT-2800, 2800M, FT-1802, etc
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for YAESU FT-2800 & Yaesu transceivers with RJ 12 Mic & 3.5mm Ext Spkr YAESU FT-2800, 2800M, etcYAESU FT-2500M 2400 & Yaesu transceivers with similar I/O YAESU FT-2500, 2500M, 2400, etc
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for YAESU FT-2500M 2400 & Yaesu transceivers with similar I/O YAESU FT-2500, 2500M, 2400, etcYAESU FT-2800 & Yaesu transceivers with RJ 12 Mic & 3.5mm Ext Spkr YAESU FT-2800, 2800M, etc
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
YAESU transceivers with 4 pin DIN RTTY jacks NOTE: This cable enables FSK/RTTY operation only.
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for YAESU transceivers with 4 pin DIN RTTY jacks NOTE: This cable enables FSK/RTTY operation only with the RASCAL GLX and appropriate YAESU transceiverYAESU FT-736, FT-600, FT-890, & Late Model FT-900. 3.5mm HF Data I/O HF jack PTT is via RCA PTT Jack.
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for YAESU FT-736, FT-600, FT-890, & Late Model FT-900. 3.5mm HF Data I/O HF jack PTT is via RCA "PTT" Jack.Early model YAESU FT-900 and Yaesu transceivers with similar I/0 For LATE model FT-900, see CBL F600 above. For FSK/RTTY operation, Use cable CBL FT4RY
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for Early model YAESU FT-900 and Yaesu transceivers with similar I/0 For LATE model FT-900, see CBL F600 above. For FSK/RTTY operation, Use cable CBL FT4RY (see below, FSK only!)YAESU FT-2800 & Yaesu transceivers with RJ 12 Mic & 3.5mm Ext Spkr YAESU FT90R and YAESUs with RJ12 Mic jacks.
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
RASCAL GLX with FREE cable for YAESU FT-90R, and Yaesu transceivers with RJ 12 Mic & 3.5mm Ext Spkr See special instructions in "CART" window
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
Radio Shack 10 meter transceiver, model HTX10
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
RASCAL GLX with FREE cable for Radio Shack HTX-10Radio Shack Model HTX-100
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
USRHTX100 RASCAL GLX with FREE cable for Radio Shack Model HTX-100Radio Shack Model HTX-212, and HTX-242 or RS 45
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
RASCAL GLX with FREE cable for Radio Shack Model HTX-212, and HTX-242 or RS 45Radio Shack HTX-252
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for Radio Shack HTX-252ICOM Transceivers with 13 pin DIN accessory jack w/ FSK pin. Wired for 160-6 meter (HF) use.
- BEST CHOICE for Icom:
- IC-703,
- IC-706 mk II,G.
- IC7000,
- IC 7800,
- IC-718;
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
ICOM Transceivers with 13 pin DIN accessory jack wired for VHF/UHF (NOT HF, see IC13RY) operation
- For Icom:
- IC-703,
- IC-706 mk II
- IC-718
- IC 7800
- IC 7000
- ICOM transceivers with similar I/O jack.
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
ICOM HF, VHF, and UHF transceivers with RJ-45 Modular Mic jacks
- ICOM models:
- IC 207H
- IC 2720
- IC 2800
- IC 703
- IC-706
- IC-718
- IC-V8000
- IC-281
- IC-381
- IC-481
- IC-681
- IC-2000
- IC-2100
- IC-2200
- IC 2350
- IC 2340
- And Icom with similar Icom I/O
- (Note: for 706 & 718, most ops prefer CBL IC13RY)
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for ICOM HF, VHF, and UHF transceivers with RJ-45 Modular Mic jacks ICOM models: IC-207H, 2720, 2800, 703, IC-706, IC-718, IC-V8000, IC-281, IC-381, IC-481, IC-681, IC-2000, IC-2100, 2350, 2340, and similar Icom I/O. (Note: for 706 & 718, most ops prefer CBL IC13RYICOM HF-VHF Transceivers with 4 pin screw-on mic & Ext Spkr ICOM models IC-202, IC-215, IC-22S, IC-245, IC-280, IC-402, IC-502, etc.
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for ICOM HF-VHF Transceivers with 4 pin screw-on mic & Ext Spkr ICOM models IC-202, IC-215, IC-22S, IC-245, IC-280, IC-402, IC-502, etc?ICOM HF-VHF Transceivers with 4 pin screw-on mic & Ext Spkr ICOM models IC-202, IC-215, IC-22S, IC-245, IC-280, IC-402, IC-502, etc...
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
ICOM HF, VHF,/UHF Transceivers with round, 8 pin Screw-On MIC & Ext Spkr jack. Uses Microphone connector
ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746, 756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics. Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751,
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand Reg $69.95,
Special Christmas Price, $59.95
documentation, photos, and drawings. - The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for ICOM HF, VHF,/UHF Transceivers w/8 pin Screw-On MIC & Ext Spkr jack. ICOM models IC-120, IC-1201, IC-1271, IC-1275, IC-228, IC-22U, IC2400, IC-25, IC-2500, IC-255, IC-251A, IC-260, IC-27, IC-271, IC-275, IC-28, IC-290, IC-3200, IC-3210, IC-3220, IC-375, IC-37A, IC-38A, IC-45, IC-47, IC-471, IC-475, IC-48, (IC-718 see also RASCAL IC13), IC-490, IC-505, IC-551, IC-560, IC-575, IC-723, IC-732, IC-751, IC-735, IC-737, IC-761, IC-765, IC-781, IC-901, IC-2310, IC-2410, IC746, 756, 760PRO, 775DXII, and other Icom transceivers with 8 pin, screw-on mics. Includes Icom IC-707, IC-720, IC-730, IC-740, IC-745, and IC-751Special Christmas Price, $59.95
documentation, photos, and drawings.ICOM HF-, Transceivers with 8 pin DIN accessory jack
ICOM Models: IC-275, IC-475, IC-721, IC-723, IC-725, IC-726, IC-728, IC-729, IC-732, IC-735, IC-736, IC-737, IC-737A, IC-738, IC-746, IC-746,IC746PRO, IC-756, IC-756PRO, IC-756PROII, IC-760/Pro, IC-761, IC-765, IC-775, IC-775DSP, IC-780, IC-781, IC-7400 IC-820, IC-821H, IC-910H, IC-970E, IC-970H, IC-1275, IC-2000 Icom transceivers with 8 pin DIN accessory I/O ports & Pro, Pro II, Pro III series
Icom transceivers with 8 pin DIN accessory I/O ports & Pro, Pro II, Pro III series
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for ICOM HF-, Transceivers with 8 pin DIN accessory jack ICOM Models: IC-7800, IC-275, IC-475, IC 707, IC-721, IC-723, IC-725, IC-726, IC-728, IC-729, IC-732, IC-735, IC-736, IC-737, IC-737A, IC-738, IC-746, IC-746,IC746PRO, IC-756, IC-756PRO, IC-756PROII, IC 756proIII, IC-760/Pro, IC-761, IC-765, IC-775, IC-775DSP, IC-780, IC-781, IC-7400 IC-820, IC-821H, IC-910H, IC-970E, IC-970H, IC-1275, IC-2000 and other Icom transceivers with 8 pin DIN accessory I/O ports. AND MORE !
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for Japnese Radio Corp, model "JST-245"KDK Transceivers w/4 pin screw-on mic & Ext Spkr jack
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for KDK Transceivers w/4 pin screw-on mic & Ext Spkr jackKenwood Transceivers with 13 pin DIN accy jack. w/ FSK pin. YES, It includes TS-2000 TS-140, TS-450, TS-570, TS-670, TS-680, TS-690, TS-711, TS-790, TS-811, TS-850, TS-870, TS-950, and Kenwood transceivers with 13 pin DIN accessory jacks.
Early Kenwood (940 & 440 below) transceivers with 13 pin DIN Accessory Jacks, see RKW4013 For TS-850 FSK operation, see CBL KW13RY R.
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for Kenwood Transceivers with 13 pin DIN accy jack. w/ FSK "pin." YES, It includes TS-2000 TS-140, TS-450, TS-570, TS-670, TS-680, TS-690, TS-711, TS-790, TS-811, TS-850, TS-870, TS-950, and Kenwood transceivers with 13 pin DIN accessory jacks. Early Kenwood (940 & 440 below) transceivers with 13 pin DIN Accessory Jacks see CBL KW40-13 For TS-850 FSK operation, see CBL KW13RY"R" below.Kenwood TS-850 and KW Transceivers with 13 pin DIN accy and FSK RCA Jack For TS-850 Kenwood transceivers with 13 pin DIN and RTTY/FSK RCA Jack.
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty. <
RASCAL GLX with FREE cable for Kenwood TS-850 and KW Transceivers with 13 pin DIN accy and "FSK RCA Jack" For TS-850 Kenwood transceivers with 13 pin DIN and RTTY/FSK "RCA Jack".GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for Early KENWOOD HF Transceivers with 13 pin DIN accessory jack TS-940, 440..KENWOOD HF and VHF Transceivers with (RJ45) MODULAR mic TM-251, TM-2400, TM-255, TM-261, TM-451, TM-455, TM-461, TM-643, TM-732, TM-733, TM-741, TM-742, TM-833, TM-841, TM-842, TM-941, TM-942, and Kenwoods with RJ45 mic jacks
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for KENWOOD HF and VHF Transceivers with (RJ45) MODULAR mic TM-251, TM-2400, TM-255, TM-261, TM-451, TM-455, TM-461, TM-643, TM-732, TM-733, TM-741, TM-742, TM-833, TM-841, TM-842, TM-941, TM-942, and Kenwoods with RJ45 mic jacksKENWOOD HF Transceivers w/4 pin screw-on mic & Ext Spkr jack TS-120, TS-130, TS-180, TS-311, TS-510, TS-511, TS-520, TS-530, TS-600, TS-700, TS-770, TS-801, TS-820, TS-830, TS-900, TX-310, TR-1300, TR-2200, TR-5200, TR-2300, TR-7010, TR-7200, TR-7400, TR-7500, TR-8000, TR-8200, TR-8300, and Kenwood transceivers with 4 pin, screw-on microphones
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
USRKW4M RASCAL GLX with FREE cable for KENWOOD HF Transceivers w/4 pin screw-on mic & Ext Spkr jack TS-120, TS-130, TS-180, TS-311, TS-510, TS-511, TS-520, TS-530, TS-600, TS-700, TS-770, TS-801, TS-820, TS-830, TS-900, TX-310, TR-1300, TR-2200, TR-5200, TR-2300, TR-7010, TR-7200, TR-7400, TR-7500, TR-8000, TR-8200, TR-8300, and more)Kenwood TR 7600, TR 7625 and Kenwoods with with 5 pin Screw-On Mic and 3.5mm Ext Spkr jack.
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for Kenwood TR 7600, TR 7625 and Kenwoods with with 5 pin Screw-On Mic and 3.5mm Ext Spkr jack.KENWOOD HF Transceivers with 6 pin screw-on mic & Ext Spkr jack
TR-7730, TR-7750, TR-7800, TR-7850, TR-7930, TR-7950, TR-8400, TR-9000, TR-9130, TR-9500, and other Kenwood transceivers with 6 pin screw-on mic connectors.
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
RASCAL GLX with FREE cable for KENWOOD HF Transceivers with 6 pin screw-on mic & Ext Spkr jack TR-7730, TR-7750, TR-7800, TR-7850, TR-7930, TR-7950, TR-8400, TR-9000, TR-9130, TR-9500, and other Kenwood transceivers with 6 pin screw-on mic connectorsKENWOOD Transceivers with 8 pin Screw-On mic & Ext Spkr I/O KENWOOD models: TM-201, TM-221, TM-231, TM-241, TM-2530, TM-401, TM-421, TM-431, TM-441, TM-531, TM-541, TM-621, TM-631, TM-701, TM-721, TM-731, TR-3200, TR-50, TS-50/S, TS-60, TS-751, TS-851, TS-140, TS-430, TS-440, TS-450, TS-660, TS-670, TS-680, TS-690, TS-701, TS-711, TS-780, TS-790, TS-811, TS-850, TS-870, TS-930, TS-940, TS-950, TW-4000, 4100,
and Kenwood transceivers with 8 pin screw-on Mic connectors
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
RASCAL GLX with FREE cable for KENWOOD Transceivers with 8 pin Screw-On mic & Ext Spkr I/O KENWOOD models: TM-201, TM-221, TM-231, TM-241, TM-2530, TM-401, TM-421, TM-431, TM-441, TM-531, TM-541, TM-621, TM-631, TM-701, TM-721, TM-731, TR-3200, TR-50, TS-50/S, TS-60, TS-751, TS-851, TS-140, TS-430, TS-440, TS-450, TS-660, TS-670, TS-680, TS-690, TS-701, TS-711, TS-780, TS-790, TS-811, TS-850, TS-870, TS-930, TS-940, TS-950, TW-4000, 4100, and Kenwood transceivers with 8 pin screw-on Mic connectorsThe RASCAL GLX, Model USRMDIN works with all transceivers having the 6 pin Mini DIN accessory jack. Regardless of make or model, if your transceiver has the six (6) pin Mini DIN accessory port, this is the interface for your radio. The six pin mini DIN is an ISO 9002 standard.
This RASCAL GLX"US" series works with PCees having either or both USB or SERIAL comports.
| The new improved 2007 RASCAL GLX offers more features and modes, including: PSK31, SSTV, EchoLink, Packet, RTTY (both FSK & AFSK), eQSO, WJST, APRS, CW, MT63, and many more. Now use only one RASCAL "GLX" with multiple transceivers. A simple cable change enables you to use our new RASCAL with a different make and model transceiver. HF, VHF, or UHF
|
Midland Transceivers with 4 pin screw-on mic and Ext Spkr jack
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty. RASCAL GLX with FREE cable for Midland Transceivers w/4 pin screw-on mic & Ext Spkr jack
For Late Model OMNI Ten-Tec transceivers with; FSK, PTT, Tx IN, Rx IN RCA jacks: Ten-Tec OMNI V, & OMNI VI. This CBL may also work with other TenTec transceivers.
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- RASCAL GLX with FREE cable for Ten-Tec transceivers with; PTT, Tx IN, Rx IN RCA jacks: Ten-Tec OMNI V, & OMNI VI (Late Model Paragon, and Corsair) and transceivers with RCA jacks for Patch IN, Patch OUT, and PTT jacks.
Ten-Tec ORION (565) Ten-Tec Orion transceivers with AUX I/O, 8 pin DIN jack.
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
RASCAL GLX for Ten-Tec ORION (565)Ten-Tec Orion transceivers with AUX I/O, 8 pin DIN jack. This RASCAL GLX also supports ORIONs with FSK/RTTY
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
KENWOOD HandHeld Transceivers with 3.5mm & 2.5mm stereo I/O (KENWOOD Models: TH-F6A, TH-F7E and transceivers with similar I/O)
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
DRAKE 4 pin screw-on mic with 3.5mm (1/8inch) Ext Spkr jack Models TR-7 or TR-7/A, and some TR-22, TR-33, TR-7, UV-3 radios
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
DRAKE 4 pin screw-on mic with 3.5mm (1/8 inch) Ext Spkr jack Models TR-7 or TR-7/A, and some TR-22, TR-33, TR-7, UV-3 radios
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
Ten-Tec transceivers w/4 pin screw-on mic and 1/4 inch Ext Spkr I/O
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
UNIDEN and some HR2510 with 5 pin Screw-On Mic and Ext Spkr jack.
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
YAESU transceivers with 4 pin (screw-on) mic input Receive audio is from the external speaker jack. YAESU models: having 4 pin screw-on microphones.
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
YAESU transceivers with 8 pin (screw-on) mic input. Receive audio be taken from the external speaker jack.
YAESU models: FT-1, FT-77, FT-102, FT-107, FT-211, FT-290 MKII, FT-480, FT-690 MKII, FT-707S, FT-712, FT-726, FT-736, FT-747, FT-757, FT-767, FT-770, FT-840, FT-850, FT-790 MK II, FT-912, FT-980, FT-990, FT-1000, FT-2200, FT-2700, FT-5100, FT-7200, FT-840, FT-890, FT-4700, FT-212, FT-ONE-S, FT-650, 707, 712, 726, 736, 756, 767, 77, 790II, 700, 840, 890, 990, 1000D and Yaesu with 8 pin Screw On MIC connectors ,
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
YAESU hand-held transceivers with 4 circuit, 3.5mm I/O jack. YAESU FT-10, FT-40, FT-50, VX-1, VX-5, VX-150, and Yaesu handhelds with similar 4 circuit, 4 conductor jacks I/O.
This RASCAL GLXUS works with PCees having either or both USB or SERIAL comports.
Features:
- Free Radio to RASCAL GLX cable, customized for your Transceiver.
- No external power required, its great for field-day and portable operation.
- EZ Setup Instructions include: EZ to understand documentation, photos, and drawings.
- The leading PC soundcard to transceiver interface.
- No jumpers to juggle. No screws to remove & replace.
- If you change radios, simply change cables. You do not have to buy another interface.
- Lots of digital mode programs and software on the FREE CD.
- Transmit and Receive Audio transformer isolated between Soundcard and Radio.
- Weighs less than 10 oz
- Works with all digital modes including FSK/RTTY and CW.
- Includes FREE CD with more than 450 MegaBytes of HAM Programs and Software
- No Hassle return & replacement within 30 days of purchase.
- One-year Parts & Labor service warranty.
- All for under $ 50.
BUXCOMM MasterMatch BALUN's, are the choice of HAM operator's around the world.
Dont forget CoaxSeal, CAT No. CS104:
In few cases, BALUN colors or design appearance may vary from those shown.
Specifications and Features:
- Magnet antenna mount type: Super strong
- Magnet mount sizes:
- Thread connection: 3/8 X 24 thread
- Low loss RG-58A/U + PL-259 plug:
- 14-foot with top quality PL259 attached.
The VH-3200 no ground VHF, 140 to 170 MHz antenna is specifically constructed for use on fiberglass cars and boats, small run-about, sail craft etc. 3 dB gain effectively doubles your radiated power.
For fibreglass or wood craft installations. Low profile 36 inch height is ideal for low-ryder cars and top mast mounting on sailboats or for use on bass, ski boats or run-abouts where long antennas would be a hazard. Comes complete with stainless steel L type mounting bracket and preassembled 15 ft white coaxial cable harness.
Dont forget the:
SPARE DIE FOR VTBNC
Order Code: VTBNCSP
Specifications
- for: for VTBNC
Specifications
- for crimping cable connectors to:
BNC
TNC
UHF
SMA
RG 59
62
140
210
55
58
BELDEN : 8279
141
142
223
303
400 - size: 9.0"
ELECTRIC DRILL & GRINDER 9 to 18 Volt DC @ 1.5A
Specifications
This gooseneck Magnifier is great for us who work with small parts and connectors. Make soldering those small-pin connectors a breeze.
Specifications
- dioptre: 3x
- arm length: 20.1"
- with mounting bracket
- magnifier diameter : 90mm
SOLDERING IRON 20W / 110V
Order Code: VTS20U
A high-quality, mains-powered soldering iron of 20W for general purposes.
Specifications
- power supply: 20W / 110V AC
- UL approved
- spare bit: BITU20
- 14 piece tool set 8 screwdrivers
- 2, philips, 3 philips,
- flat,
- star,
- tweezers-bent nose -
- straight pliers,
- diagonal cutter,
- round nose pliers,
- scissors,
- magnifying glass
Features
- network tester: consists of a tone generator and a probe
- method: use the tone generator and the probe to determine where a cable is going and whether or not (and where) the cable is interrupted
- signal viewing in 3 modes: lamp (L), speaker (SP) or both (S&L)
- tone generator output (square waveform): single (900Hz) or dual (900 - 1000Hz)
- comes with: soft carrying bag
Specifications
- tone generator:
- working voltage: DC 9V ?15% (battery not incl.)
- working current: 10mA (intermittent tone) / 20mA (continuous tone)
- output wave form: square wave signals ?10Vpp
- single audio frequency: ? 900Hz
- dual audio frequency: ? 900Hz - 1000Hz
- dimensions: 4.5" x 2.4" x 1.1"x
- weight: ? 130g
- probe:
- working voltage: DC 9V ?15% (battery not incl.)
- working current: 25mA (L) / 80mA (max. SP volume) / 100mA (max S&L volume)
- max. reception sensitivity: > 30mV
- maximum output volume: ?120dB
- dimensions: 8.1" x 1.6" x 1.5"
- weight: ?80g
- handy, versatile and portable LED tester
- types of LED:
- normal LED
- bi-colour LED (CA and CC)
- superflux (spider) LED
- normal LED: testrange between 2-30mA
- all others: testrange between 20 and 150mA
- Power supply: 9V battery (6F22SC, incl.)
- Dimensions: 80 x 55 x 23mm
- weight: 80g
Lexmark X1270 Color All-in-One; Print, Scan and Copy at the Touch of a Button, Lexmark X1270 All-in-One
Great quality straight out of the box!
The Lexmark X1270 offers 4800 x 1200 dots per inch (dpi) resolution color on photo paper in best mode Color Scanning
The flexible flatbed scanner is designed to handle books, reports and photographs. Offering up to 600 x 1200 dpi scan resolution (up to 9600 dpi enhanced) and 48-bit color scan depth, you will be amazed at the precision and detail you can achieve.
Accu-Feed paper handling system: Virtually eliminates paper jams.
Uses LEXmark Cartridges (color = 26) (Black = 16)
Packaged Weight (lbs) 11.9 lbs.
XFMR6K6, 600 OHM/600 OHM AUDIO COUPLING TRANSFORMERS for use in Sound Card to HAM Radios in PSK & SSTV interfaces
, Also IDEAL FOR TELEPHONE LINE MATCHING Audio coupling transformer600/600 impedance
Both Primary and Secondary center tapped
Primary DC resistance: 65 ohms
Secondary DC resistance: 55 ohms
Freq +/- 1.5db 300Hz>7.5kHz
Size: .46"H x .59"W x .55"L.
For large quantity discounts call Jan toll-free at; 1 866 300 1969
XFMR6K6X10, Ten (10) for $9.90.
600 OHM/600 OHM AUDIO COUPLING TRANSFORMERS for use in Sound Card to HAM Radios in PSK & SSTV interfaces
, Also IDEAL FOR TELEPHONE LINE MATCHING (Patch IN & Patch Out) Audio coupling transformer600/600 impedance
Both Primary and Secondary center tapped
Primary DC resistance: 65 ohms
Secondary DC resistance: 55 ohms
Freq +/- 1.5db 300Hz>7.5kHz
Size: .46"H x .59"W x .55"L.
For larger quantities, contact Ms Mata, toll-free at; 1 866 300 1969
MIC does not have Up-Dn buttons or keypad.
Model YA45MIC,
Yaesu Microphone for Yaesu transceivers with RJ45 Mic jacks.
MIC does not have Up-Dn buttons or keypad.
MIC does not have Up-Dn buttons or keypad.
Cat # YAESU4M, All Cables, Connectors, Components, Case, Custom designed Printed Circuit board, PSK31 software, pictorial diagrams, schematics, software CD and setup instructions, are included with every ISO interface, kit.
There are no jumpers to joggle, no wall-wart or external power supplies. A CD with more than 50 Sound Card software packages to choose from. Freeware, Shareware, and Commercial software will enable you to enjoy the best of your PC sound card and the HAM Radio digital modes. This interface utilizes transformer coupling between the PC Sound Card line in/line out, and your transceiver. Automatic PTT is via serial comport and software control.No other manufacturer offers you this soundcard to transceiver interface value!
RASCAL PSK31, SSTV, MSFK, RTTY and Packet Sound card to Yaesu transceivers with 4 pin MIC connector interfaces. Most of these radios will require that receive audio be extracted at the 3.5mm, external speaker jack. YAESU models: FT-2, FT-2F, FT-7/FT7B, FT-101, FT-101Z, FT-107, FT-220, FT-221, FT-223, FT-224, FT-225, FT-227, FT-301, FT-501, FT-625, FT-901, FT-902 FT-etc...
This is a kit of unassembled parts; No Tech Support for kits !
Cat # YAESU8M, All Cables, Connectors, Components, Case, Custom designed Printed Circuit board, PSK31 software, pictorial diagrams, schematics, software CD and setup instructions, are included with every ISO interface, kit.
There are no jumpers to joggle, no wall-wart or external power supplies. A CD with more than 50 Sound Card software packages to choose from. Freeware, Shareware, and Commercial software will enable you to enjoy the best of your PC sound card and the HAM Radio digital modes. This interface utilizes transformer coupling between the PC Sound Card line in/line out, and your transceiver. Automatic PTT is via serial comport and software control.RASCAL interface for YAESU to PC Sound Card; PSK31, SSTV, RTTY, MFSK and Packet applications. Most of these radios will require that receive audio be taken from the external speaker jack. YAESU models: FT-1, FT-77, FT-102, FT-107, FT-211, FT-290 MKII, FT-480, FT-690 MKII, FT-707S, FT-712, FT-726, FT-736, FT-747, FT-757, FT-767, FT-790 MK II, FT-912, FT-980, FT-990, FT-1000, FT-2200, FT-5100, FT-7200, FT-840, FT-890, FT-ONE-S, and MORE,
This is a kit of unassembled parts; No Tech Support for kits !
